Annual Maintenance of Sri Prasanna Venkateswara Swamy Temple at Booragamanda, Chittoor District for the year 2026-27

Earthwork excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all Operational, incidental ,labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work - Ordinary soil-Manual means up to 3m depth. Note: Cost of dewatering may be added, where required, up to 5% of labour cost. Assessment for dewatering shall be made as per site condition

Filling of foundations and basement with best river sand in layers of not more than 15 cms. thick each well watered to saturation and consolidated including cost and conveyance of all materials, incidental charges etc., complete.

Cement Concrete (1:4:8) using 40 mm (0.54 Cum), 20 mm (0.27 Cum) and 12 mm (0.09 Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, machine mixing, cost and conveyance of all materials etc., complete.

Cement Concrete CC(1:2.5:5) - Grade M15 using 20 mm ( 0.54 Cum) and 12 mm (0.36Cum) nominal size hard broken granite crushed metal from any source conforming to the relevant ISI standards for foundations etc., laid in layers of not more than 15 cm thick well compacted including curing, ,machine mixing, cost and conveyance of all materials etc., complete. Note: Measurement boxes shall be used for measuring the quantities of cement, aggregate and water required for the given concrete mix.

Supply and placing of the M20 Design Mix using of 10mm HBG crushed metal 0.480cu.m,6mm HBG Crushed metal 0.320cu.m,sand 0.400cu.m and cement 350Kgs with water cement ratio of 0.53(185.50 ltrs/cu.m of CC) etc., from any source confirming to the relevant ISI standard including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, vibrating, laying concrete, curing etc., complete with minimum cement content as per IS code from standard suppliers approved by the department but excluding cost of steel and its fabrication charges, centering charges, shuttering charges for finished item of work (APSS No. 402)

-do- for precast slabs using 10 mm graded aggregate HBG crushed metal from any source conforming to the relevant ISI standards, with necessary reinforcement,but including cost of necessary form work etc., complete as directed by the department.

- do - for 50mm thick

Providing High Yield Strength deformed (HYSD)/ Thermo mechancially treated (TMT) steel bars of below 36 mm Fe 500/Fe-500D/Fe550 grade (as per IS 1786 - 2008) of different diametres for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars including all wastages such as over laps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. (APSS NO.126) (In the absence of 18G binding wire,2 nos of 20G binding wire in tandem are to be strictly adhered). Note: Unless otherwise fabrication and placement of steel, no pre-pament shall be made against the supply of steel reinforcement

Construction of Brick Masonry in CM(1:5) using well burnt Bricks 2nd class or ground moulded (Non- modular or traditional size) (230 x 110 x 70 mm)including curing, cost and conveyance of all materials as directed during execution and complying with standard specifications etc., complete.

Construction of pre-cast cement block masonry in C.M(1:8) Using pre-cast cement blocks made with C.M(1:8) commercial quality of size 290x190x140mm or any approved size including curing cost and conveyance of all materials as directed during execution.

Plastering in Cement mortar using best river sand from approved quarry including cost and conveyance of all materials, screening, curing, rounding of corners, incidental charges as directed during execution complying with standard specifications etc., complete for the following proportions.

-do- in CM (1:5) 20 mm thick

-do- in CM (1:5) 12 mm thick

-do- in CM (1:3) 12 mm thick

-do- in CM (1:3) 20 mm thick

Providing impervious coat to exposed RCC roof slab surface with CM (1:3), 20mm thick with 500ml of liquid concentrated micronized cement water proof compound/ 100ml of Integral cement water proofing admixture complies with IS:2645-2003 of approved make per 50 kg bag of cement laid over roof when it is green including cost of all materials, conveyance charges of materials and all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item.

Providing weather proof course with Screeding concrete in CC(1:2:4), 25mm average thickness using 6 to 10mm nominal size HBG crushed metal chips, screeding duly embedding 24G chicken mesh with necessary overlap etc.., and finishing the surface neatly and rounding the edges at parapet walls, columns etc., including cost of chicken mesh, including cost of all materials and conveyance of all materials etc., complete as directed during execution.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for verandah openings using M.S. Flats, square rods, angles, sheets etc., of approved design including necessary cuttings, bending, fabrication, welding, grinding and finishing smooth including painting the grills with Two or more coats with Synthetic enamel Grade-I paint over a Primary coat (Red oxide metal primer) (total two or more coats with synthetic enamel paint Grade-I & one coat of metal primer) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply of the following Anodized Aluminum / Mild Steel (Power coated) Fixtures for Doors, windows & Ventilators

Aluminium Aldrop (IS:2681) 250 mm long

Aluminium Aldrop (IS:2681) 200 mm long

Aluminium Tower Bolt-10 mm Bolt (IS:204) 200 mm Long

Aluminium Tower Bolt-10 mm Bolt (IS:204) 150 mm Long

Aluminium Door Handles (IS:208) 125 mm Long

Plain or Corrugated Galvanized iron sheets as per IS 277 (0.1mm to 0.8mmthickness)

Supply of machinery in desilting works guide lines for engaging Excavator- Loader (JCB) (Capacity / out put of machine 0.24/1 Cum) 1. The owner should transport the JCB to the work spot at his own costs. 2. The Excavator- Loader (JCB) should be able to excavate a minimum of 40 cubic meter of Earth per hour. 3. The Excavator- Loader (JCB) should be able to load 20 tractor as per hour with quantum of 2.83 cubic metre of loose factor per each tractor. 4. The rate of per hour is inclusive of all the costs like POL, Transportation of Machine, Driver Batta and other incident charges. 5. The payment of the Excavator- Loader (JCB) should be paid hourly basis subject to the condition 2&3 cited above. 6. The Excavator- Loader (JCB) should have the Tacho metre and it should function properly.

Providing & Placing on Terrace(at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to IS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply of Pin headed Glass 4 mm thick

Supply and fixing of the following Single socket PVC /SWR pipes & fittings ( as per ISI standards) 4 kg/cm2 (Type-A) including labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., any dia including fixing necessary fittings like bends,plugs,couplers, junctions,tees,etc., with solvent jointing as per standard practice.

-do- 110mm dia 3 M Single socket PVC /SWR pipes

-do- 75 mm dia 3 M Single socket PVC /SWR pipes

Supply and fixing of the following PVC /SWR pipes & fittings ( as per ISI standards) 6 kg/cm2 (Type-B) including labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., any dia including fixing necessary fittings like bends,plugs,couplers, junctions,tees,etc., with solvent jointing as per standard practice.

-do- 160 mm dia 3 M Double socket PVC /SWR pipes

Supply of the following U.V resistant UPVC SWR pipe fittings (as per BIS standards )

-do- 110 mm dia - Door Bend 87.5 Degree

-do- 110 mm dia - Plain Bend 87.5 Degree

-do- 110 mm dia - Single Tee with Door

-do- 110 mm dia - Single 'Y' with Door

-do- 110 mm dia Coupler.

-do- 75 mm dia Door bend 87.5 degrees.

-do- 75 mm dia Plain bend 87.5 degrees.

-do- 75 mm dia Coupler.

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007)

-do- 22.20mm ODPipe - SDR 13.5

-do- 28.60mm ODPipe - SDR 13.5

54mm ODPipe - SDR 13.5

Cleaning of septic tanks through sludge gulper (up to 4000 liters) including the conveyance of sludge gulper, operational charges etc., complete as directed during execution.

Supply of glow sign vinyl stickered name plate / sign (or) instruction boards using 3mm foam white sheet as back ground and glow sign vinyl sticker one layer for letters of different sizes as directed during execution including cost of 3mm foam sheet vinyl sticker and all labour charges for computer design and cutting, pasting and fixing the boards as directed during execution.

Supply and fixing of glow sign radium stickered Text / sign (or) picture of different sizes directly on the glass door partitions/Sheets/Floors/Roads/walk ways/walls etc., as directed during execution using glow sign radium stickers one layer including cost and conveyance of all materials etc., complete.

Hire charges for supply, erection and removal of digital design flex boards with frame work made with of 25mm x 25mm MS square pipe (light weight)with required back support to erect boards at specified places as directed by the department. The cost inclusive of materials, labour for printing, erection and removal square pipe (light weight) after completion of the function.

Supply of the following Semi-Skilled (2nd Class) & unskilled workmen required for maintenance and miscellaneous works at in and around the KM premises and for dragging of Maharatham, in all Festival days both in the morning and evening with procession of dieties as and when required etc. complete as directed during execution by the department.

Mason/Carpenter/plumber/stone cutter/painter/ Bar bender /welder 2nd class

Man and woman mazdoors

Painting single coat for Internal walls - old with Acrylic Emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for internal walls.

Painting single coat for External walls - old with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting two coats for External walls - Old with Acrylic Emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and shade over priming coat with ready mixed Cement primer for exteror grade-2 (water thinnable) (Total Three coats) for old plastered surface after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS 911 for external walls.

Painting with Ready mixed Synthetic Enamel paint in all shades Grade-II having VOC (Volatile Organic Compound) content less than 50 grams/liter approved colour and make including brushes to have an even shade including cost and conveyance of all materials as directed during execution complying with standard specifications etc., complete.

-do- Single coat for old wood work

-do- Single coat for old Iron Work & old plastered surface

Supply of 3 Core 4.0 Sq mm ISI marked, Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: As per list of recommended brands as category I

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Fabrication, transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands. Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range - 1No. 32 A TP, 10KA MCB. - 1No. Indication lamps (R-Y-B) with switch control - 1set. Voltmeter & Ammeter selector switch - 2 Nos. Supply and fixing of ISI Mark suitable capacitor. Upto 7.5 HP with DOL Starter of. Makes: L&T

Supply, fabrication and erection of steel structure in position by using MS Tubes & Pipes of all diameters as per IS -1161, including labour charges for fabricating all heavy steel works like trusses, stanchions, heavy beams and girders including cost of welding rods, power changes etc., and cost and conveyance of all materials and including labour charges for fixing heavy iron grills, trusses, stanchions, heavy beams and girders erecting in position and fixing by using chain pulley blocks, derrek pole arrangements and cranes etc., complete and painting two (2) coats with ready mixed synthetic enamel paint in all shades grade-I having VOC (Volatile Organic Compound) content less than 50 grams/ liter approved colour and make, including brushes to have an even shade, over priming coat with ready mixed red oxide metal primer paint (total three (3) coats), including cost and conveyance of all materials, as directed during execution complying with standard specifications etc., complete as directed during execution. (TATA / SAIL / VSP / JINDAL) shall be used. Note:- If any size of MS Tubes & Pipes of TATA / SAIL / VSP / JINDAL is not available, then only the filed Engineers' shall permit for usage of APOLLO Brand (or) as specified during execution.

Supply & Fixing of CPVC Ball valves

Supply & Fixing of Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 25 mm NB Size

Supply & Fixing of Gunmetal (GM) Ball valve with SS Ball and SS Spindle as per IS - Class - I, Indian make heavy type - 50 mm NB Size

Hire charges of Core drilling machine / Drilling equipment

Providing and laying water proofing Cum heat insulation treatment with Home Shield Polyurethane (PU) Roofkoat (Berger or equivalent) over existing roof slab, all as directed by Engineer-in-charge and as per the following specification: Surface Preparation: 1.Clean the Surface toughly to make it smooth and free of any foreign material. 2.Water pounding test for Mother slab to identify the leakages points before starting the water proofing treatment work. 3.Injection grouting should be done for all leakages point identified and inject the cement slurry remixed with injection grout admixture, using pressure grouting machine till the rejection of material from the nozzle. 4.Reparing of construction joints by chasing with cutting machine and fill the same with polymerized mortar in C.M(1:4) admixture with Advanced Latex plus as per the specified company instructions. Water proofing Application with PU Roofkoat 1. Apply a self-priming coat of PU Roofkoat after diluting with clean water @50%(1:0.50, 2.Allow to dry for 4 to 6 hours 3.Ally 1st coat of PU roofkoat without [email protected] per Sqm 3.Allow to dry for 4 to 6 hours 4.Apply 2nd coat of PU roofkoat without dilution @ 0.40Kg per Sqm The cost inclusive of all required materials such as Home Shield Polyurethane (PU) Roofkoat (Berger or equivalent), injection grouting with required materials, repairing construction joints with required materials and all labour charges for above activities etc., complete as directed during execution.

Labour charges for re- laying the cut stone flooring as directed during execution, the rate is including lifting the cut stone slabs from store yard and unloading the same at work site carefully without damage etc., complete. The slabs should be jointed with CM ( 1:2 ). The joint should not be more than 6mm thick and the mortar should not come over the stone. The slabs should be laid jointed to proper alignment as directed during execution.

Varnishing the wood work with best varnish of approved quality and make including brushes to have an even shade and including cost of linseed oil, boiled, stopping cloth, cost and conveyance of all materials as directed during execution complying with standard specifications.

-do- varnishing Two coats for old wood work.

Conveyance of excavated surplus earth/debris to a distance 5 kms from the site of work at the place specified by the Engineer-in-Charge including loading and unloading etc., complete as directed during execution.