Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.2 LAccepted-AOC | ₹3.2 L | L1 | Accepted-AOC Agreement executed on 23/10/2025 |
| 2 | L2₹3.4 LRejected-AOC | ₹3.4 L | L2 | Rejected-AOC Higher rate and hence not admitted |
| Sl No | Description | Qty | Unit | IRSHAD A L1 | CM ABDULLAKUNHI L2 |
|---|---|---|---|---|---|
| 1.00ROAD CONCRETE | |||||
| 1.00 | 3.8.3:Excavation in Ordinary Rock using Hydraulic Excavator and Tippers with disposal upto 1000 m <br> Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3.5 | 45.9 | cum | 57.87 ₹2,656.23 | 24.04 ₹1,103.44 |
| 1.00 | 75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification
(i) Nominal mix (1:2:4) | 45.9 | cum | 6,723.47 ₹3.1 L | 7,210.2 ₹3.3 L |
| 1.00 | 3.3:Construction of Embankment with Material Obtained from Roadway Cutting <br> Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5 | 7.65 | cum | 39.87 ₹305.01 | 288.5 ₹2,207.03 |
| 1.00 | OD183895/2025-2026:Engraving letters in hard stone. | 350 | per Letter per cm height | 8 ₹2,800 | 8.58 ₹3,003 |
| 1.00 | OD199397/2025-2026:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished granite less than 0.5 sqm area, at road sides, walls etc. locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch tips, including rubbing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. | 0.24 | sqm | 3,746.02 ₹899.04 | 3,709.68 ₹890.32 |
Tender Value
₹4.2 L
EMD Value
₹10,547
Closing Date
29 Aug 2025, 6:00 pmClosed
MANJULA NK
Office of the Assistant Engineer, LID and EW Section, Kumbla Grama Panchaya
Annual Plan-ANNUAL PLAN KUMBALA GP 2025-26 PR NO 82/26 CHECK POST MAKKALIPALLA SIVAGIRI ROAD IMPROVEMENT-IN WARD 08-General Civil Work
2025_LSGD_786168_10
03/2025-26/TN/AE/LIDEW/KMBL
Open Tender
Civil Works - Roads
180 days
Kumbla Grama Panchayat
Please refer Tender documents.
7 documents required · 7 mandatory
₹930
Yes
₹10,547
Yes
10 Jan 2026
21 Aug 2025
1 Sept 2025
21 Aug 2025
29 Aug 2025
21 Aug 2025
Amount
ROAD CONCRETE
3.8.3:Excavation in Ordinary Rock using Hydraulic Excavator and Tippers with disposal upto 1000 m <br> Excavation for roadway in ordinary rock with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, transporting to embankment site with a lift upto 1.5 m and lead upto 1000 m, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections as per Technical Specification Clause 302.3.5
75.8.1:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as requiredincluding compaction, finishing and tamping etc .complete. Max. size of courseaggregate not exceeding 25mm , mixed in concrete mixer etc complete as perspecification (i) Nominal mix (1:2:4)
3.3:Construction of Embankment with Material Obtained from Roadway Cutting <br> Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per Technical Specification Clause 301.5
OD183895/2025-2026:Engraving letters in hard stone.
OD199397/2025-2026:Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished granite less than 0.5 sqm area, at road sides, walls etc. locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch tips, including rubbing, moulding and polishing to edge to give high gloss finish etc. complete at all levels.
CM ABDULLAKUNHI (BID ID -2313525)
Bidder Name
IRSHAD A
CM ABDULLAKUNHI
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid