UPHA- Providing Amenities to Palakkad Fort at Palakkad, Palakkad Dist., Keralam

Providing and supplying cast iron bench with integrated seat and back, overall size 1500 mm (L) × 600 mm (W) × 800 mm (H) with seat height 487 mm, consisting of 13 Nos. MS square tubes of size 50 mm × 25 mm and 1500 mm length forming the seat and back, minimum total tube weight 24 kg, decorative cast iron side supports/legs of best quality with minimum 32 mm thickness, all cast iron components coated with rust-inhibiting paint, MS square tubes finished in wooden colour, including all nuts, bolts, washers, anchor fasteners, transportation, loading, unloading, fixing in position complete, and all labour, tools and tackles required for complete installation, as directed by the Engineer-in-Charge. Heritage fixing safeguard: Benches/anchors shall be fixed only at locations and into modern/approved substrates identified by the Engineer-in-Charge. No drilling, chasing or anchoring into protected historic masonry, floors or architectural fabric is permitted without specific written archaeological/conservation approval.

Providing, fabricating, supplying and fixing freestanding Direction Sign Board of approved design and dimensions, comprising SS 304 grade stainless steel support post fabricated from 75 × 75 × 2 mm square hollow section, welded to 150 × 150 × 10 mm SS 304 base plate and fixed with 4 Nos. M12 stainless steel anchor fasteners over PCC (1:4:8) foundation block of size 300 × 300 × 250 mm, including excavation in all kinds of soil, backfilling and disposal of surplus earth. The sign frame shall be fabricated from SS 304 grade 25 × 25 × 1.6 mm square tube, complete with 4 mm thick Aluminium Composite Panel (ACP) fixed to the frame using stainless steel countersunk screws and provided with high-intensity retro-reflective vinyl graphics, directional arrow and lettering as per approved artwork. The stainless steel members shall be fully welded, ground smooth and finished with satin/hairline finish, complete with all fittings, fixtures, welding, polishing, transportation, erection, alignment, labour, tools, tackles and all incidental works, complete in all respects as directed by the Engineer-in-Charge. Monument protection: Direction-sign foundation, excavation and anchor locations shall be approved in writing before work. Excavation shall be minimal and carried out under the directions of the Engineer-in-Charge. Any archaeological feature/find shall result in immediate stoppage at that location and reporting to ASI; no fixing into historic fabric is permitted without specific written approval.