03 /EE/PMD/PHED OF 2025-2026/Sl5

Amount

Supply, delivery of 400 Amp. 415V, 50 Hz 3 P neutral link MCCB of breaking capacity 50 kA, adjustable Overload Setting: 0.8 - 1.0 x In, Conforms to IS/IEC 60947-2 & IEC 60947-2 with suitable SS enclosure in built neutral link easy wall mounting, IK08 and IP30 protection.

Supply, delivery of 250 mm dia. 7.00 mm thikness MSERW Pipes as per IS: 1239 (part I & II) for suction common header lines. (Make: Approved make of PHED)

Supply, delivery of 250 mm dia. 6.3 mm thickness MSERW B/W Elbow.

Supply and delivery of 250 mm dia. 10.5 kg/cm² MS Slipon flange. ASA 150 B16.5

Supply and delivery of 200 mm dia. 10.5 kg/cm² MS Slipon flange. ASA 150 B16.5

Supply and delivery of 250 mm dia. 10.5 kg/cm² MS Blank flange.

Supply, delivery at site and storage of bourdon type Gauges with 150 mm dia cast aluminium dial with SS internal Siphon Tubes, DN 15 mm GI Impulse line withThree Way Cock etc. Pressure Gauge ( 0 - 16 kg / sq.cm )

Compound Gauge ( + 1KSCG to -1 KSCG )

MS dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. PN 1.0 ratings. (Make: Approved make of PHED) i) DN 200 mm

ii)DN 250 mm

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m. Other than SAIL/ TATA/RINL

Making suitable size flowmeter foundation guard 1mtr x 1mtr as required dimension with supplying of necessary cement, brick sand and stone chips including plastering and net cement finish complete masonery work and hinge MS fabricated top gate with locking arrangement as per direction of EIC.

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. Exposed work i) Dia.: 20 mm

ii) Dia.: 32 mm

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 50 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Installation above supplied item no. 1.00 to 8.02 and making pipe line with supply and fixing of all necessary nut, bolt, flange, etc. including labour charges of cutting welding by machinery tools and hire charges of Generator, welding set, fuel, lubricants etc. with drawing of power cable from WBSEDCL meter to Main switch to MCC panel (cable supplied by departmental stock) through wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting and fixing main switch on MS angle frame with double earthing arrangement with S & F necy cable gland, lugs, nut, bolt etc. as per direction of EIC.

Add GST @ 18%

Add CESS @ 1%

RABINDRA NATH KHAN (BID ID -6468034)

NUPUR CHANDRA HALDER (BID ID -6468004)