SPL REPAIRS TO BUILDING NO 111 113 AND INCINERATOR AT DUMPING

Amount

Demolition of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for re-use complete all as specified and as directed .

M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling as per manufacturer's instruction complete all as specified and as directed.

Dismantling timber Unframed work scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed .

S&F 2nd class hard wood scantlings clean sawn 40 sqcm and over in section in unframed work timber fixed complete all as specified and directed.

Dismantling timber Unframed work scantlings under 40 sq. cm in section, in fillets, rails, posts, rafters, purlins etc, complete all as specified and as directed .

M&L for second class hard wood plain fillets square, rectangular any section clean sawn, secured with nails or brads, sectional area exc 6 sq cm and n exe 13 sq cm, complete all as specified and as directed .

M&L for second class hard wood plain fillets square, rectangular any section clean sawn, secured with nails or brads, sectional area exc 13 sq cm and n exe 25 sq cm, complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote complete all as specified and as directed.

Dismantling of boarding of any description, fixed in any position with nails complete all as specified and as directed.

M&L for 4mm thick ACP sheet as in ceiling and eves board including cutting and fixing with screw and 40x40x2 60 MS Tubes in between to wall and wall end ACP sheet complete all as specified and as directed .

Dismantling single layer Mangalore pattern or similar tiles in roofing complete all as specified and as directed .

Dismantling tile battens of any size including tiling fillets spaced exc 15 cm centre to centre complete all as specified and as directed.

M& L for preparing surface of tiles or slate battens, any size and spacing, prepared and treated all over (measured overall on one side only, spaces not deducted) with creosote complete all as specified and as directed .

S& F second class hard wood clean swan battens for tiles fixed at 30 cm centre to centre, Sectional area exc 5 sqcm and nexc 15 sqcm complete all as specified and as directed.

All as per item No 14 above but fixing only battens complete all as specified and as directed . Note: Battens dismantled vide item no.12 shall be re-used.

M&L Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed..

All as per item No 16 above but except tiles( tiles obtained from dismantling shall be used) complete all as specified and as directed .

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and as directed.

All as per item No 18 above but except tiles( tiles obtained from dismantling shall be used) complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed .

S&F UPVC rain water gutter (square - 220 MM) with all necessary fittings, clamp, joints, end cap, corner drop, centre drop, etc joining compounds, nut, bolts or screws etc and fixing in position, at any height complete all as specified and as directed. Make: EURO GUARD PRO SQUARE or Equivalent approved by GE.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (jointing shall be done with solvent cement) complete all as specified and as directed .

S&F PVC (SWR) bends, any radius, 110mm bore all as specified, complete all as specified and as directed .

Dismantling of plain or corrugated steel sheeting any gauge, thickness including nainital or similar pattern roof covering complete all as specified and as directed .

Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified.

S&F 0.71 mm thick Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) complete all as specified and directed.

M&L 0.63 mm thick Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type or cranked hook bolts, in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410 Gde-E-250 quality -A complete all as specified and directed.

S&F in repairs aluminium anodised powder coated frame work for partition (area of panel not exceeding 1.50 sqm each) without sash bar, including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc (minimum thickness of powder coating 50 micron) complete all as specified and as directed .. Note:- Section used for partition shall be of catalogue No 9223 of Hindalco size 63.58x38.10x2.00 mm (single partition vertical &horizontal sections) or equivalent make as approved by GE

S&F in repairs aluminium anodised powder coated frame work for door with out sash bar,including all necessary jointing cleats, hold fasts, hinges with fixing clips, rubber gasket, anodised snap beading, anodised aluminium fittings, locking arrangement etc (minimum thickness of powder coating 50 micron) complete all as specified and as directed . Note:- Section used for door shall be of catalogue No 9258 of size 50x44.50x1.80 mm for door vertical stiles, catalogue No 9286 of size 50x45x1.50 mm for door Top and middle /lock rail ,catalogue No 9246 of size 100 x44.50x1.85 mm for door bottom rail, of Hindalco or equivalent make as approved by GE

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed .

S&F in repairs aluminium anodised grill ,having mesh size 50 mmx50 mm made out of 6 mm wide 3 mm thick aluminium section including 'U' clips and all necessary fixing arrangements complete all as specified and as directed .

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed .

M&L for 4.8 mm thick sheet glass, ordinary quality fixed with glazing clips/aluminium cleats in square n.exc 0.50 sqm in each pane all as specified complete all as specified and as directed .

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 40mm thick PCC type B0 1:2:4 (using 12.5mm graded stone aggregate ) as in repair top surface of pavement and flooring etc. and surface finished even and smooth with using extra cement complete all as specified and as directed.

M&L for cleaning the roof surface thoroughly with wire brush and remove deleterious materials and providing screed bed in cement mortar 1:3, 10mm thick (min) with liquid WPC (as per manufacturer's instructions) and applying oil based bituminous primer @ 0.20Kg/Sqm provided and laying 4mm thick APP modified water proofing membrane weighing not less than 4Kg/Sqm reinforced with non woven polyester matt weighing not less than 160gm/Sqm having softening point not less than 650N/Sqm, tearing strength of 180N/Torque application including minimum 10cm side overlap and 15cm end laps applying a coat of blown grade hot bitumen 85/25 over the membrane 1.20Kg/Sqm finishing with solar reflective bituminous based aluminium paint @ 0.10Kg/Sqm complete all as specified and as directed . Note:- WPC shall be measured and paid separately.

Supply only Liquid water proofing compound complete all as specified and as directed.

S&F in repair powder coated Aluminium curtain rail 25 mm dia with fixing brackets, stops, rollers etc fixed complete all as specified.

S&F in repairs vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) and connection to drain and flush pipe.

S&F plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device

S&F PVC valve less, low level flushing cistern 10 litre capacity, white symphonic action with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia

S&F in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including suitable pedestal and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper.

S&F pillar taps cast copper alloys, with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe suitable for 15 mm bore pipe. Make:- Pillar Tap with aerator - Parryware Cart Part No.Crust T3102A1 or equivalent model of other manufacturers from the list

Dismantling of floor hearth or wall tilling tiles including cement mortar bedding (but not backing) and disposing the rubbish off the premises all as directed

M&L for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including provision of 15 mm thick screed bed in CM (1:6) all as specified and directed.

M&L in coloured Glazed ceramic tiles in vertical surfaces 350x250x7 mm /450x350x7mm thick as in dado's/skirting over and including provision of backing coat 10 mm thick in CM (1:3).

M&L for light shade Vitrified tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including provision of 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

All as per item no.51 above but as in vertical surface over and including backing coat 10 mm thick in CM (1:3).

Demolition of Stone slab paving of any description or thickness laid dry or laid dry and pointed and tiles of any description or thickness in floors, aprons etc.

M&L for 75mm thick plain cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment over and including a 30mm thick layer of coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm Spreading and levelling in layers n exc 25cm thick , well ramming including watering as required complete all as specified and directed.

M&L for cement concrete 1:2:4, type B1 using 20 mm graded crushed stone aggregate as in kerbs (around Machine pressed precast concrete paver block) including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm all as directed.

M&L for 18mm thick Multiwood modular kitchen cabinets, inside depth not less than 0.50M , water proof, termite & Borer proof, corrosion free with melamine polished shutter with auto closer counter sunk hinges, stainless steel handles complete including fixing SS baskets all as specified and as directed . Note :- (i) Front facing area of cabinet only shall be measured for payment. (ii) The rate quoted for this item shall be inclusive of the fixing charge for the Stainless steel baskets supplied under item No. 60. (ii) Colour shall be as directed

Supply only a set of stainless steel baskets consist of following items with all fittings for modular kitchen cabinet :- (i) Plate basket 21"x19"x8" - 01 No (ii) Plane basket 21"x19"x8" - 01 No. (iii) Plane basket 17"x19"x8" - 01 No. (iv) Butlery basket 17"x19"x4" - 01 No. (v) Cup & Saucer basket 17"x19"x4" - 01 No. (vi) Single pull out 8" - 01 No. (vii) GT- PT & Drip tray 22" - 01 No. (viii) Telescopic channels of appropriate size - 06 Nos. Make:- First quality of Sleek/ Ebco/ Dolin

M&L for complete removal of existing surface finishes from internal/external wall by scoring, washing down with water jet complete all as specified.

M&L Preparing new and old surfaces of wall and applying 3mm thick wall care putty and applying two coats of acrylic interior emulsion over a coat of suitable primer complete all as specified and as directed.

M&L for preparation of new or old plastered surfaces of wall and applying two coats of Apex Ultima Protek of Asian paint (or equivalent product of any manufacturer from the list) over a coat of protek base coat / anti fungal primer duly applied through authorised company applicator using modern tools and techniques complete all as specified and as directed.

M&L for preparation of new decorated surfaces of ceiling and applying two coats of distemper emulsion over a coat of primer complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exceeding 10 cm width or girth including preparation of new surface.

M&L for preparation of old steel surfaces of any description and applying two coats of synthetic enamel paint (ordinary tint) all as specified and directed

M&L for preparation of old painted steel surfaces of any description not otherwise described nexc 10cm width or girth and providing one coat of synthetic enamel paint (Ist quality) of approved tint to achieve glossy finish complete all as specified and directed

M&L for Preparation of new steel surfaces and applying two coats of anti corrosive paint over a coat of appropriate primer complete all as specified.

Grubbing up tree trunk exc 250cm and n exc 300cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and levelling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site all as specified.

Excavation in post holes (or similar holes) each n.exe 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil all as specified and as directed.

M&L for Plain cement concrete 1:3:6 type C2 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Resecuring or easing & adjusting shutters of any description not exceeding 1.0 Sqm without taking down and fixing in same opening.

Resecuring or easing & adjusting shutters of any description exceeding 1.0 Sqm and not exceeding 2 Sqm without taking down and fixing in same opening.

Taking down Shutters of any description area nexc 1 sqm each complete all as specified and as directed.

Taking down shutter of any description area exceeding 1.00 Sqm and not exceeding 2.0 Sqm

Taking down chowkats with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm complete all as specified and as directed..

M & L 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed

S&F 2nd class hard wood 30mm thick glazed, gauged and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass,gauze,etc, size of members of shutters as specified in SSR Part I, Section 8,ciause 8.24(a) complete all as specified and as directed.

S&F 2nd class hard wood Factory made 35mm thick Plain framed, panelled shutter (two panel) kiln seasoned and chemically pressure treated with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) complete all as specified and as directed,

S&F Aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and as directed .

S&F in repairs Aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified and as directed .

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

S&F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

S&F butt hinges 100mm medium weight cold rolled mild steel powder coated with mild steel hinges pin complete all as specified and as directed .

S&F extruded aluminium alloy handles fabricated type anodised 150 mm size.

S&F in repairs extruded aluminium alloy handles fabricated type anodised 150 mm size.

S&F extruded aluminium alloy handles fabricated type anodised 100 mm size.

S&F in repairs extruded aluminium alloy handles fabricated type anodised 100 mm size.

S&F aluminium plate type II gate and shutter hooks and eyes of 200mm size

S&F in repairs aluminium plate type II gate and shutter hooks and eyes of 200mm size

S&F in repairs brass chromium plated tubular towel rail 20mm dia, 60cm long with brackets complete . Make:- Parryware Cat part No.T6901A1 or equivalent model from M/s Hindware / Cera.

S&F Door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring, 140mm over length of cover plats.

S&F in repairs Door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring, 140mm over length of cover plats.

Hacking out old broken glass (any thickness size, quality or description) from wooden frames glazed with putty or fitted with beads not exceeding 1.50 Sqm.

S&F Sheet glass ordinary quality 3.00 mm thick and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed .

S&F 4.00mm thick frosted glass pin head type and glazing with oil putty / beads in squares not exceeding 0.5 Sqm in each pane

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed

M&L for providing pre-cast cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab, shelves and similar articles and set in CM 1: 6 including necessary formwork complete all as specified and as directed. Note: Reinforcement shall be measured and paid separately.

M&L for hard-core of gauge not exceeding 63 mm with crushed stone aggregate or broken boulders, spread and levelled in layers n exc 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed ..

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor, 75 mm thick complete all as specified and as directed ..

M&L 50mm thick cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in floor, finished surfaces even and smooth without using extra cement including rounding or chamfering of exposed edges.

Cutting holes in brick wall built in cement mortar, depth of embedded exceeding half brick and not exceeding one brick and making goof dismantled portion in cement concrete 1:2:4 type B1 for inserting hold fast.

S&F Mild steel hold fast, clamps plain angle cleats and similar small articles conforming Fe 290 Gde E 165 complete all as specified and as directed .

S&F in repair 2nd class hard wood, small fittings such as brackets of any type latch and hinge blocks, shaped door and windows stops and the like including all necessary labours articles not exceeding 200 Cu cm each.

S&F in repairs PTMT gratings 100 mm dia with minimum weight 25 gms with provision to receive the waste water pipe and fixed with white cement alround.

Taking down cement plaster on brick or concrete walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15mm thick on brick or concrete wall surfaces with cement mortar (1:6) with WPC @3% by weight of cement finished even and smooth without using extra cement complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

M&L for rendering 10 mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement.

M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.

All as per Item no. 110 here in above but for 6mm to 8mm dia TMT bars.

M&L for TMT bars in reinforcement 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed.

M&L RCC for Slabs (Type B1, 1:2:4, using 20mm graded stone aggregate) supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of Formwork flat rough finish to soffits of culvert slabs, roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars,etc complete

M& L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

Dismantling fencing wire mesh any type complete all as specified.

M&L Posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165

S&F 5 to 10mm diameter of neck Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed.

S&F MS galvanised chain link fencing of grid size 50x50mm, 3.10mm dia wire (Weight not less than 3.25 Kg/Sqm) including line wires fixed to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish to a distance not exc. 50m complete all as specified and as directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, ressummers,lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

M&L Reinforced cement concrete (nominal mix) Type B1, 1:2:4 (20 mm graded stone aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

Demolition of PCC in ground floors and paving n.exc 15cm thickness ( below or above GL) un re-inforced.

M&L PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) 25mm thick in floor finished even and smooth without using extra cement .

S&F powder coated Anodised aluminium frame for doors, windows, ventilators, partitions, cubicles etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S &F powder coated Anodised aluminium door shutters sliding arrangement, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each or, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F Aluminium Mortise lock vertical type size 100 mm, 4 levers complete all as specified and directed

M&L 12 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed

M&L for 3mm thick wall care putty on internal walls complete all as specified and directed

M&L for complete removal of existing treatment of plastered surfaces and applying two coats of oil bound distemper including with alkali resistant priming paint preparatory to distempering on surfaces of walls complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of oil bound distemper with or tinted including alkali resistant primer preparatory to distempering on surfaces of walls complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed.

S&F 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially emulated jointing compound and 48 mm wide fibre tape to provide seam less finish incl provision of two coats of oil emulsion distemper over a coat of wall care putty in ceiling surface complete all as specified and directed.

Dismantling celling boards of any description, any thickness including cover fillets.

M&L for vitrified ceramic tiles light shed 9 -10mm thk (square / rectangular) polished area of each tiles exceeding 0.42sqm but n.exc 1 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed with cement mortar (1:6) complete all as specified and directed

All as per item No: 138 but in skirting/dado over and including 10 mm thick backing coat in CM 1:4.

M&L for carrying out repairs to incinerator complete all as specified and directed. Note:- The scope of this item include for following and contractor shall quote the rates considering all these factors :- (a) Re-lining of Bricks inside the burning chamber. (b) Provision of proper arch brick lining on the top of the incinerator. (c) Damaged bricks shall be replaced with new bricks. (d) All the damaged portions of the incinerator shall be re-weld .. (e) Rectification of damaged plates of front door. (f) Rectification of feeding doors with proper insulation and frames. (g) Painting of entire installation with two coats of synthetic enamel paint over a coat of primer incl preparation of surface.

Provision of water scrubber unit made of SS 304 2mm thick plate with MS 8 mm thick top plate and MS 8 mm thick bottom plate consist of 10 feet SS chimney including provn of MS foundation plates and all accessories with required ducts, CPVC pipe lines , 0.5 HP Pump (one stand by), PVC water recirculating tank and required accessories complete with painting the incinerator all as per manufacturer's / consultants direction. Note for item No. 140 & 141:- The tenderer shall visit the site with prior permission of Engineer in charge to asses the actual site requirement and quote their rate accordingly. No claim whatsoever shall be entertained at a later stage regarding scope of work.

S&F 40mm outer dia CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings, on wall/concealed on wall , including jointing with yellow solvent cement and taking down old unserviceable pipe complete all as specified and directed,.

All as per item No. 142 here -in-before but of size 25 mm dia

All as per item No. 142 here -in-before but of size 20 mm dia

S&F in repair Bib cock, CP quarter turn with flange and aerator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed Make:- Model No F2004152 of Cera or equivalent model of prayag/hindware/Jaguar

S&F in repair CP Bib cock short body with flange and nozzle for garden/washing machine of size 15 mm including necessary fixing accessories with GI/CPVC pipes complete all as specified and as directed. Make:- CERA : Model No 2003153 or equivalent model of PRAYAG /Jaguar.

S&F in repair Two way bib cock ,quarter turn with flange and aerator of size 15 mm and taking down old unserviceable cock complete all as specified and as directed. Model No : F2004163 of Cera or equivalent of prayag/hindware/Jaguar)

S&F in repair concealed stop cock regular body, Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directed Make :- Model NO: F2002362 of Cera or equivalent model of prayag/hindware/Jaguar.

S&F in repair 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for CPVC pipe, complete all as specified and as directed. Make : Model No: F2004201 of Cera or equivalent model of prayag/ hindware/Jaguar.

S&F in repair swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15 mm size, 195 mm long with bend of 45 degree ,dia 70 mm with flange for fixing with CPVC pipe complete and all as specified and as directed. Make:- Model No: F7020104 of Cera or equivalent model of prayag/ hindware/Jaguar.

S&F in repair PVC connection pipe 16mm dia (outer 450mm long cold water and taking down old one complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed.

S&F in repair health faucet ABS body with wall hook and 1.0 metre SS braided rubber hose pipe all as specified and directed. Make : Model No: F8030102 of Cera or equivalent model of prayag/hindware/Jaguar.

S&F in repair wall mixer (3- in - 1) with arrangement of both Telephonic shower and over head shower with 210 mm long bend pipe complete all as specified and as directed. Make : Model No :F2002403 of CERA or equivalent model of Prayag/Jaguar.

S&F in repair SS Kitchen sink cock quarter turn wall mounted with swivel spout not less than 150 mm and wall flange complete all as specified and as directed . Model No: F2004251 of CERA or equivalent model from manufacturers from the list.

M/L for cutting chasses on walls floor etc not exceeding 10 cm girth and making good the disturbed surface to match with the existing after removing the existing concealed pipe/laying new pipe, complete all as specified and directed by the Engineer-in-charge.

Taking down Geyser of capacity 25/50 ltrs of any make / from any height from its existing position duly disconnected inlet/outlet water connection and electric connection stored in safe custody including re-fixing the same on its existing position after other repair works and making connection inlet/outlet water connection complete all as specified and directed.

S&F in repair CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

All as per item No. 157 above but of size 20 mm dia.

All as per item No. 157 above but of size 40 mm dia.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 1000 litre capacity including making holes for inlet and outlet including taking down old tank complete all as specified and directed .

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of 500 litre capacity including making holes for inlet and outlet including taking down old tank complete all as specified and directed .

S&F float valve synthetic (PVC) of size 25 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed.

S&F float valve synthetic (PVC) of size 20 mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L for point wiring for one light/fan point with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade controlled by one way switch including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC conduit medium grade ISI marked concealed of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm depth pressed steel box factory made for mounting of switch, socket and fan regulator with modular frames covers including chase cutting and making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed.

All as per item No. 165 here in before but for one bell point controlled by one 5 Amp bell push on independent board complete all as specified and directed.

All as per item No. 165 here in before but for one 5 pin 5 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No. 165 here in before but for one 5 pin 5 Amp socket outlet point on same board complete all as specified and directed.

All as per item No. 165 here in before but using with 2.5 sqmm copper conductor cables multistranded (FRLSH) PVC insulated, unsheathed cable and including 2.5 Sqmm copper conductor cable multistranded (FRLSH) PVC insulated and unsheathed cable as earth continuity wire and connecting to common earth dolly for one 6 pin 15 Amp socket outlet point on independent board complete all as specified and directed.

All as per item No 165 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure on independent board. complete all as specified and as directed.

All as per item No.165 above but with 4.0 Sqmm copper conductor including 4.0 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board. complete all as specified and as directed.

Supply and fix in repair ceiling rose surface Bakelite 65 x 50 mm 3 terminals 240 volt 50 Hz complete all as specified and directed.

S&F in repair modular type sockets 6 Amp-2/3 pin combined 2 module complete all as specified and directed.

S&F in repair switch modular type single pole, 6 Amps, one way all as per specified & directed.

S&F in repair modular sockets 6 Amp/16 Amps, 2/3 pin combined 2 module complete all as specified and directed.

S&F in repair switch modular type 1 module, 16 Amps, one way all as per specified and directed.

S&F in repair electric bell, AC 230 V, single pole complete all as specified and as directed.

S&F in repair bell push modular 6 Amps, 1 module, all as specified and directed.

S&F 20 watt LED T-8 tubular lamp with extruded aluminium /pc body and PC diffuser and inbuilt driver including mirror light batten suitable for T8 lamps , suitable connection from ceiling rose to tube lamp all as specified and directed Make:- Cat No.-REGALBATTENT8UPTO1X22WDSBSWH and CRYSTAL1213T8DSTL20WLED865SGLASS of havells or equivalent model of other manufacturers from the approved list.

S&F in repair LED light fitting 10 W, high performance batten , 220 volt ,50 Hz, surface mounted high quality aluminium extruded with all connecting accessories ,with suitable connection complete all as specified and as directed. Make:-.cat part no-LUMILINEPLUSBS10WLED865SPCSS of Havells or equivalent model of other manufacturers from the approved list.

S&F LED pearl round recessed LED flat panel 18 Watt, 240 Volt, 50 Hz all as specified and directed. Make:- Cat part No. -EDGEPRORDDLR18WLED857S of Havells or equivalent model of other manufacturers from the approved list..

M&L for sub main wiring with 2 runs 4 Sq mm single core, PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit not less then 25 mm with all accessories , one run of 4 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Three runs of 4 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

M&L for sub main wiring with 2 runs of 6 Sqmm single core, PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through PVC concealed conduit not less than 25 mm with all accessories on surface, one run of 6Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:-Three runs of 6 Sqmm size PVC copper cable, and one run of PVC conduit shall be measured as one unit length.

M&L for sub main wiring with 4 runs of 10 Sqmm single core, PVC insulated, unsheathed, multistranded copper conductor FRLSH cable 1100 volts grade drawn through non-metallic PVC concealed conduit with all accessories .one runs of 10 Sqmm cable single core PVC insulated, unsheathed, ,1100 Volts grade multistranded copper conductor FRLSH cable as earth continuity conductor and connecting including cutting the chases etc and making good the disturbed surface to match with the existing complete all as specified and directed. Note:- Five runs of 10 Sqmm size PVC copper cable, and one run of non metallic PVC conduits shall be measured as one unit length.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp, 240 volts ,50 Hz including taking down old one complete all as specified and directed

S&F in repair Sheet metal enclosure for MCB DB, SPN, 8 ways, double door, with 200 amps rated bus bar, having IP-43 protection complete all as specified.

S&F sheet metal enclosure TPN for DB's when MCB's to be used 8 way with 200 amps,415 Volt ,50 Hz , bus bar and double door complete all as specified and directed.

S&F 415 V 10 KA 'B' curve miniature circuit breaker (MCB) of four poles and current carrying capacity 40 to 100 amp in the complete with connection testing and commissioning

S&F 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of two poles and current carrying capacity in the MCB SPN complete with connection testing and commissioning.

S&F MCB 'B' curve SP 6 to 32 Amp, 240 Volts 10 KA all as specified and directed. Make : Schneider Cat Part No. A9N1P06B-32B or L&T Cat Part No. BB10060B to BB10320B / Legrand Cat Part No. 408587-408596

S&F ceiling fan 230 V,1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE 5 star rated BLDC mortor,White colour, regulator operated (without remote) with 300 mm/ 450 mm down rods and accessories. Make:- Cat part no- Eco 28 prime of Luker or equivalent model of other manufacturers from the approved list.

S&F Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers including cutting the suitable hole for fixing exhaust fan to match with existing surface complete all as specified and directed.

S&F ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm completed all as specified and directed by engr in charge .

S&F decorative Led wall mounted light 12 watt ,voltage range 140-265 volts ,colour warm white ,IP-20 fixture made up of metal, suitable connection .all as specified and directed. Make:- Cat part No- LWL105 of Luker or equivalent model of other manufacturers from the approved list.

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F switch piano flush type 5A one way complete all as specified and as directed.

S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed.

S&F Socket 5 pin 5 Amps flush type complete all as specified and as directed.

S&F Switch socket combination 2 in 1, 3 pin 5A/16A, 5 in 1 flush type with fuse & neon indicator complete all as specified and as directed.

S&F in switch piano flush type single pole one way 15 Amp complete all as specified and as directed by engr in charge.

S&F in repair, socket outlet multipurpose 5 and 15 Amps, 5 pin, 2 in 1 complete all as specified and directed.

S&F surface mounted LED down lighter 2'x2', 36/40 W 240 Volt all as specified and directed. Make:- Philips Cat Part No. RC380B LED 30S-6500 G4 L60 W60 PSD OD or equivalent model of other manufacturers from the approved list.

Taking down exhaust fan, painting of fan complete with two coat of synthetic enamel paint over a coat of primer by spraying including filling cavities and re-fixing fan and connecting up including provision of cable (copper wire) from ceiling rose in connector to fan 230V all as specified and as directed.

S&F MCB 'B' curve 40 Amp SPN, 240 Volts all as specified and directed. Make Schneider Cat Part No. A9N2P40B or equivalent model of other manufacturers from the approved list.

Taking down old sub main wiring of any type and size and removing to store yard making good disturbed wall surfaces matching with existing surfaces all as specified and directed.

M/L sub main wiring with 2 single core 16 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 16 Sqmm PVC insulated unsheathed single core 1100 volts grade multistranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed. Note- Three runs of 16 sqmm size cable and one run of PVC conduit shall be measured as one unit length

Taking down of existing unserviceable earthing of any type and making good disturbed surface all as specified and as directed.

S&F copper strip 20x3 mm with saddles, fixing screws etc from existing chemical earth test point to the new equipment all as directed.

M&L in repair earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI strip 25 x 4mm upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and indicated including testing on completion including taking out old earthing complete. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber,RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade for watering and 40mm dia GI light grade earth lead protection pipes with funnel and wire mesh all complete all as specified and directed.

Supply, installation, testing and commissioning of split air conditioning unit 2.0 TR capacity (Inverter type) complete with cordless remote control, minimum 3 star labelled, eco friendly refrigerant gas, 6000 Kcal / Hr, 50 Hz, 240 volts, air cooled condenser with all accessories varied speed including fixing the out door unit with suitable site requirement and fixing of room (high wall) unit on wall with necessary wall cutting/ making holes to pass the refrigerant pipes, drain pipes, cables etc and making good to match with existing finishing complete, providing and making interconnection, including refrigerant with nitrile rubber insulation and control cable from indoor to outdoor upto a distance of 3.0 Mtrs as provided by OEM, Power cabling (Max 3.0 Mtrs from Isolator/ Enclosure) to unit, first charging of refrigerant gas including codeless remote, drain piping of suitable size including connection drain lines from unit to nearest drain points complete all as specified.

S&F Voltage stabilizer, copper wounded suitable for 2TR inverter type split AC, automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5%, fixed on wall with necessary arrangements complete all as specified.

S&F copper refrigerant piping of both sizes for suction line 5/8" and 1/4" for discharge including thermal insulation class "o" nitrile rubber insulation density 45- 55 kg/m³, for suction/ discharge line, beyond standard length provided with original units by the manufacturer. Note:- a) This item shall be measured for the quantity used at site for item No. 211 for beyond the length provided by OEM, along with unit. b) One run of both 5/8" & 1/4" pipes along with insulation shall be measured as one length.

M&L for point wiring for one 5 pin 5 Amp socket outlet point on independent board with 1.5 sqmm PVC insulated (FRLSH) unsheathed copper conductor multistranded 1100 volts grade including 1.5 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity conductor including connected to common earth dolly drawn through and including rigid PVC casing capping medium grade ISI marked of suitable size with all accessories and sunken box of 1.6 mm thick and 60 mm Depth pressed steel box factory made for mounting of switch, socket concealed in wall , making good to the disturbed surface and matching to the existing finishes specifications complete all as specified and as directed.

All as per item No 213 here-in-above but 6 pin 15 amps switch socket outlet point on independent board with 2.5 sqmm (FRLSH)PVC insulated unsheathed stranded copper conductor with 2.5 sqmm PVC (FRLSH) insulated stranded copper wire for continuous earthing.

S&F modular switch 1 way 6 Amps,1 module

S&F socket modular 6 Amps and 2/3 pin combined 2 module.

S&F Modular socket 6 A/16 A - 2/3 pin combined 2 module

S&F switch 15 A One way SP modular type.

S&F MCB 'B' Curve 40 to 63 Amp SPN ,240 Volts. Make:- L&T Cat Part No. BB20400B or equivalent model of other manufacturers from the approved list.

M&L sub main wiring with 2 single core 6 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn through and including PVC casing capping wiring one run of 6 sqmm PVC insulated unsheathed single core 100 volts grade multistranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed. Note : two run of 6 sqmm size PVC cable one run of 6 sqmm size PVC cable as earth wire and one run of PVC casing capping shall be measured as one unit length.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth lead wire 4mm dia upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and indicated including testing on completion including taking out old, earthing complete. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber,RCC 1:2:4 type B1 for precast cover slab 50 mm thick, reinforcement 8 mm TMT bars @ 150 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade pipe for watering and 15mm dia GI light grade earth lead protection pipes with funnel and wire mesh complete all as specified and directed..

S&F Sheet Metal Enclosure for MCB DB, SPN, 8 ways, double door, 240 Volts, with 200 Amps rated bus bar having Ip-43 protection including taking down old DB complete all as specified.

S&F MCB 'B' Curve 40 Amp SPN, 240 Volts all as specified and directed. Make:- L&T Cat Part No. BB20400B or Schneider Cat Part No. A9N1P40B or Legrand Cat Part No. 406618

S&F Inline duct exhaust fan with circular connections, low sound levels, IP 54, single phase, 50Hz, 192 Watts, speed 2590 RPM, 315mm sweep, 725 CFM, static pressure 10mmwg, voltage range 220-240 volts suitable for duct and reducer, complete cutting the wall and prepare suitable hole for fixing of inline exhaust fan including all necessary civil works complete all as specified and directed Make:- Model No – CK-315 B of Oostburg or equivalent model of other manufacturers from the approved list.

Supply, assemble and erection of GI sheet 24 Gauge with C&SS rectangular/square duct of 45cm width made out of ‘L’ shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt, Gasket and appropriate sealant on longitudinal joints etc complete all as specified and directed.

MS BUILDERS

Vidya constructions

THOMSONS CONSTRUCTIONS