PROVISION OF WOMEN SAILORS WASHROOM AND DUTY CREW ROOM AT SNOM PROVN OF DEFICIENT PARKING SHED AT SAILORS ACCOMMODATION AND SPECIAL REPAIRS TO DRAIN PATH AND PLINTH PROTECTION NEAR BLDG NO P 84 AT INS GARUDA UNDER GE NW KOCHI

Amount

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in soft/loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering all as specified and as directed by Engr-in-Charge.

M&L Cement concrete PCC1:3:6 type C2 using 40mm graded stone aggregate in post holes foundation fillings and mass concreting complete all as specified and as directed by Engr-in-Charge.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe -410W (gde E-250) quality A complete all as specified and as directed by Engr-in-Charge.

S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet MP Tile pattern, 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet , 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

M&L for preparation of new steel and iron surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed .

S&F Euro guard pro square UPVC rainwater gutter(220 mm) with all necessary fittings, clamp, joints, end cap, corner drop, centre drop, etc joining compounds nut bolt or screws etc and fixing in position, at any height complete all as specified and as directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls (jointing shall be done with solvent cement) complete all as specified and as directed .

S&F PVC (SWR) bends, any radius, 110mm bore all as specified, complete all as specified and as directed .

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft /loose soil.

M&L for 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and as directed by Engineer - in -Charge.

M&L for Hard core of Gauge exc. 63mm but n. exc 150mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled / rammed to a true surface complete all as specified and as directed by Engineer - in- Charge.

M&L Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm (30mm thick) Spreading and levelling and ramming as specified complete all as specified and as directed by Engr-in-Charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 graded with grey cement and pigment complete all as specified and as directed by Engr-in-Charge.

M&L for PCC 1:2:4 type B0, (12.50mm graded stone aggregate) as in mass concrete around the machine pressed pre cast concrete paver block or chamfered on edges all as specified and as directed by Engineer - in - Charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engr-in-Charge.

M&L for Plain Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass-concrete complete all as specified

Use and waste of formwork to faces of walls, retaining walls, abutments .parapets and similar works including attached pilasters, buttresses etc. vertical or to batter for rough finished flat surfaces of concrete using steel complete all as specified and as directed by Engr -in-Charge.

M&L for RCC M-30 grade design mix as in bottom slab and side wall of drain and the like any thickness complete as specified.

M&L for Precast cement concrete Type B1 1:2:4 (20mm graded aggregate) in drain cover slabs and similar articles with plain faces, including sleeve holes of 5cm dia and setting in mortar with joints to match complete including necessary formwork all as specified.

M&L for 5mm thick rendering in cement mortar 1:4 on concrete surface finished even and smooth without using extra cement complete all as specified and directed

M&L for Pre-cast cement concrete block masonry with solid blocks, 1:3:6 Type C1, (using 20mm graded stone aggregate) exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed.

M&L, 15mm thick rendering in C.M. (1:4) on fair faces of brick/block masonry work finished even and fair without using extra cement

M & L for preparation of newly plastered or un-plastered surfaces of wall and applying three coats of white wash completed all as specified and directed by Engr-in-charge.

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick with white cement and pigment, top surface treated with antifungal paint set and jointed and pointed in neat cement slurry with pigment in floors laid over & including 15 mm thick screed bed in cement mortar 1:6 all as specified and as directed.

M&L 75mm thick plain cement concrete (1:3:6) type C1 using 20mm graded stone aggregate as in path or plinth protection and finishing surfaces of concrete even and smooth including making construction joint at interval of 1.2 mtr & filled with bituminous filler complete all as specified and as directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out soft/loose soil

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

Removing excavated material to a distance exc 1.5Km n.exc 5Km and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and as directed.

M&L Reinforced concrete pipes, class NP2 150mm bore dia laid and jointed complete with collars

M&L for Plain Concrete type D2 1:4:8 in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in all as specified and directed.

M&L Providing precast cement concrete Type B1, 1:2:4 (20mm graded aggregate) in landings, cover slabs (for man holes etc) challah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cm 1:6 complete all as specified and as directed. Note:- (i)The quoted rate shall be inclusive of cost of formwork. (ii) Reinforcement shall be measured and paid separately.

M&L for Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth complete all as specified and as directed by the Engr -in-Charge.

S&F RCC Hume pipe septic tank for 25 users designed to carry sewage and sullage water incl excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete all as shown in drg no. TD/A/157 sheet No.1/1 of HQ CE (NW) Kochi

S&F Soakage pit for 25 users as shown on TD drg No.TD/A/161 of sheet No.1/1 (of HQ CE (NW) Kochi) with all connected works complete all as specified and as directed. Note: The Unit rate shall include necessary excavation, returning filling and removal surplus soil to a distance exc 1.5km but necc 5km.

M&L PCC 1:2:4 type B0 (using 12.50mm graded stone aggregate) for haunching inside the manhole complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises

Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and as directed .

Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm.

Taking down chowkhats or frames n exc 1.5 Sqm each with shutters (with out taking of shutters from the frames).

M&L PCC 1:2:4 Type B0 using 12.50mm graded stone aggregate as in Damp Proof Coarse complete all as specified and as directed.

M&L for RCC M 30 Design mix as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engr-in-Charge.

M&L for RCC M 30 design mix using 20mm graded stone aggregate for Columns, piers, pillars and struts all as specified

M&L for RCC M30 design mix using 20mm graded stone aggregate for beams, cantilevers, lintels etc all as specified

M&L for RCC M 30 design mix using 20mm graded stone aggregate for roof slab/shelves/slab all as specified.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finished surfaces complete all as specified

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat fair finished surfaces complete all as specified

Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions rectangular fair finished surfaces all as specified

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for flat fair finished surfaces of concrete (Horizontal or sloping) complete all as specified and as directed.

M&L for TMT bars in reinforcement 10mm dia and over including cut to length , bend to required shape , cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed by Engr-in-Charge

M&L for TMT bars in reinforcement 6 to 8mm dia including cut to length , bend to required shape , cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed by Engr-in-Charge

M&L for TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders etc , cut to length, bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Moorum / red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and as directed.

M&L for ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed by Engr-in-Charge.

M& L for ATT for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

M&L for rendering 8mm thick in CM 1:4 with WPC @3% by weight of cement, finished even and smooth without using extra cement over 12mm thick back coat on brick or concrete wall surfaces with cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge. Note : WPC shall be measured and paid separately.

Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc.

M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces of ceiling surfaces finished even and smooth complete all as specified and as directed by Engr-in-Charge.

Supply only Integral waterproofing compound

M&L for two coats of antifungal paint over a coat of exterior primer over exterior sealant base coat on plastered surfaces of wall including preparation of surfaces all as specified and as directed.

M & L for preparation of new wall surfaces and applying three coats of white wash all as specified.

M & L for preparation of old wall surfaces by complete removal of finish and applying three coats of white wash all as specified.

M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed by Engr-in-Charge.

M&L for preparation on new surfaces and applying two coats of oil bound distemper over a coat of primer and 1.5mm thick wall putty complete all as specified and directed.

M&L Vitrified coloured tiles 8 to 10 mm thick any shade (square / rectangular) polished , area of each tile exceeding 0.42 sqm but n. exc 1 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including screed bed of 15 mm thick in CM 1:4 all as specified and directed.

M&L Vitrified coloured tiles 8 to 10 mm thick any shade (square/ rectangular) polished , area of each tile exceeding 0.42 sqm but n. exc 1 sqm, in vertical surface such as dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles over and including backing coat of 10 mm thick in CM (1:3) all as specified and directed.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of screed bed 10 mm thick in CM (1:4) all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including provision of backing coat of 10 mm thick in CM (1:4) complete all as specified.

Supply and fix PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete

Supply and fix vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including trap set in and including concrete and connection to drain and flush pipe.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F of Vitreous china urinal partition white of size 310x700 mm. complete all as specified and as directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads shoes, bends, swan-necks etc, including removal to store

S&F of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified

S&F of PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia complete all as specified and directed

S& F in repairs PVC (SWR) bend any radius 110 mm bore complete all as specified and directed.

Supply and fix in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets.

Supply and fix pillar taps fancy type cast copper alloys, with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe suitable for 15 mm bore pipe complete all as specified and as directed.

S&F for powder coated aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F for powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified

S&F powder coated aluminium window and ventilator shutter powder coated side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified

S&F aluminium powder coated dark coloured deco grill 75 mm aperture, made out of 7.5 mm plate and finished deco grill will have 7.5 mm width and 6 mm thick with rubber beading & looks etc

Supply and fix 2nd class hard wood plain, solid, straight chowkat and frames, wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, all as specified.

Supply and Fix 2nd class hard wood 35mm thick panelled shutter plain, framed, panelled (any member of panels) with panel of timber flat on both sides (feather edged) or veneered particle board medium density, wood particle board with commercial face veneers.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Supply and fix aluminium anodised barrel tower bolt extruded section of 200 mm long complete all as specified.

M&L for mild steel flat iron of size 25x3mm as in hold fast for fixing the door frame etc and other similar items confirming to fee 410-0 or Fe 310-0 complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregate) for embedding of hold fast including necessary formwork complete all as specified.

Supply and fix stainless steel butt hinges of size 125mm complete all as specified and as directed

Supply and fix extruded aluminium alloy handles fabricated type anodised 150 mm size.

Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy

M&L for preparation of new wood or wooden based surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer complete all as specified and as directed .

Supply and fix stainless steel butt hinges of size 100mm complete all as specified and as directed

Supply and fix aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified.

Supply and fix extruded aluminium alloy handles fabricated type anodised 100 mm size.

Supply and fix 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engr -in-Charge

S&F 5mm thick frosted glass one side frosted ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each plane complete all as specified and as directed

S&F 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work complete all as specified and as directed .

S&F Aluminium (extruded section) body door closer hydraulically regulated designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg.

S&F Aluminium snap grid false ceiling on frame work of angle 25x25x2 mm, Main TEE 38x25x1.5 mm and cross TEE 25x25x1.4 mm and size of grid 605x605 mm with hangers 6 mm dia GI (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60 mm long and expansion hold fasteners 12.50 mm dia, 40 mm long with and including provn of 4mm thick Non asbestos fibre cement building boards fixed to aluminium frame work with screws including preparation of new ceiling surfaces and applying one coat of distemper oil emulsion over a coat of chalk whiting complete all as specified as per manufacturer's instructions and all as specified and directed.

S&F of Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified

S&F of Toilet paper holder, vitreous China, box type fixed to walls with chromium plated (CP) brass screws

S&F of Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms)

PVC (SWR)multi floor trap with grating including jointing with solvent cement 75 mm dia of outlet.

High density polyethylene (HDPE) pipes of pressure rating 6 Kgf/Sq.cm, 50 mm bore.

Harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. all as specified and as directed by Engr-in-Charge.

M&L for 100mm thick PCC type B2 1:2:4 (using 40mm graded stone aggregate ) as in pavement, sub base and flooring etc. Complete all as specified and as directed by Engr-in-Charge

M&L for Water Proofing Treatment by applying oil bound bituminous primer 0.20 Kg/ Sqm, providing and laying 4 mm thick APP modified water proofing membrane weighing not less than 4 Kg/ Sqm, reinforced with non-woven polyester matt not less than 160 g/ Sqm, having softening point not less than 1400 C, longitudinal tensile strength not less than 650 N/Sqcm, tearing strength of 180 N by torque application including minimum 10 cm side overlap and 15 cm end lap and applying a coat of blown grade hot bitumen 85/25 conforming to IS : 702 heated to a working temp of 180 degree and applied @1.2 Kg/Sqm, finishing the surface with solar reflective bituminous aluminium paint @ 100 g/ Sqm, complete all as specified and as directed by Engineer in Charge and as per manufacturer's instructions.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting sheet metal encl. with plug & socket etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M&L Concealed Point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CML No. single core multi stranded cable in and including medium grade PVC conduit not less than 20mm dia and accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and including 1.6 mm thick MS sheet/ pressed steel sunken boxes depth not less than 50mm (earth dolly) duly painted with two coats of anti-corrosive paint / aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paints over a coat of red oxide primer externally covered with 3 mm thick plastic laminated sheet cover for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multi stranded cable as earth continuity wire all as specified and as directed for One light point controlled by one switch complete all as specified and as directed.

All as per item No. 114 Above, but for One fan point / exhaust fan point controlled by one switch & regulator complete all as specified and as directed.

All as per item No. 114 Above, but for One 5 pin 5 Amps Socket point controlled by one switch on same board complete all as specified and as directed.

All as per item No. 114 Above, but for One 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and as directed.

All as per item No. 114 Above, but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified and as directed.

All as per item No.114 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure complete all as specified and as directed.

S&F switch piano flush type 5A one way complete all as specified and as directed.

S & F Ceiling rose, 3 phase /PVC / polycarbonate, isolated body complete all as specified and as directed.

S&F Socket 5 pin 5 Amps flush type complete all as specified and as directed.

S & F socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type universal complete all as specified and as directed.

S&F Switch piano flush type single pole 1 way, 15 Amps complete all as specified and as directed.

S & F Power Unit 25 Amp modular type for AC Make Havells Cat Part No AHOO002504 complete all as specified and as directed.

Taking down existing any type light fitting, complete and keep aside for re-using or removing to store yard complete all as specified and directed.

Supply & fix Regal Batten for LED tube lights, both side connection type and LED tube rod 1 x 20 Watt, both side connection all as specified and as directed. Make of batten : Havells Cat Part No. Regal batten 8UPT001X22WSSBSWH / Crompton Cat Part No. IGP131LT8-16 / Philips Cat Part No. TMC501P1XTLED22WP3241 Make of tube rod : Havells Cat Part No. Crystal 1213T8DSTL20W LED 865 GLASS / Crompton Cat Part No. LG-T8-20-865-2 / Philips Cat Part No. Essential LED tube 1200mm 20W865T865T81ND-1

Supply & fix LED down lighter 2'x2' , 36/40 W 240 volt all as per specified and directed. Make Havells Cat Part No. ENDURASLIMPROPLUS 2x2 PLR36WLED 840MOD and driver LEDDRIVER36V36WS or Philips/ Crompton

Supply and fixing LED mirror light 1 x 10W/12W Watt Wall/Surface mounted luminaries with engineering plastic housing, wired with all accessories complete incl provn of flexible copper wire from ceiling rose to light fitting terminal. Make- Make :Crompton Cat No. LDL-10-WW, Luker Cat Part No. LTSM10, Philips B No 21LED12S

S&F TPN 63 Amps, 415 Volt complete all as specified and as directed to be fixed in existing DB.

S&F SPN sheet metal enclosure for DB 4 ways Double door complete all as specified and as directed.

S&F MCB 'B' Curve 32 Amp SPN ,240 Volts all as specified and directed. Make L&T / Schneider / Legrand

S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts, all as specified and directed. Make L&T / Schneider / Legrand

S&F wall mounted air circulators PVC body, 400 mm sweep, 1440 rpm with fixing arrangements on wall including screws, rawl plugs etc. connecting to the electrical system all as specified and directed. Make: Havells/ V-Guard / Almonard

S&F 300 mm sweep, metal body exhaust fan heavy duty, single phase 230 Volts, all as specified & directed. Make: Havells Cat Part No. Ventil Air-DX white or Crompton Cat Part No. EXHD300-4-1 / Bajaj.

Supply and fix PVC body exhaust fan 230/ 240 V of size 250/300 mm sweep with louver complete all as specified including taking down old ones and depositing to MES store yard. Make : ATOMBERG/ USHA/ CROMPTON

Taking down old sub main wiring of any type and size and removing to store yard, making good disturbed wall surfaces matching with existing surfaces all as specified and directed.

M/L sub main wiring with 2 single core 6 Sqmm PVC insulated unsheathed multi stranded copper conductor cable 1100 volt grade drawn through and including PVC rigid conduit concealed wiring including necessary PVC conduit specials including chases cutting complete except beam and RCC roof and one run of 6 Sqmm PVC insulated unsheathed single core 1100 volts grade multi stranded copper conductor cable as earth continuity conductor and connecting with suitable size thimble complete all as specified and as directed. Note: two run of 6 sqmm size PVE cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length

M&L in repair earthing complete with galvanised steel earth plate electrode 60 cm x 60cm x6 mm thick, buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meters below normal ground level, connected to GI earth strip 25x4 mm upto length 7.5 mtr by means of bolts, nuts and washers of galvanised steel all as shown in electrical plate No. 3 connected to earthing test point complete all as specified and indicated including testing on completion including taking out old earthing complete. Note : The rate is deemed to be inclusive of the cost of complete earth work in any type of soil. PCC 1:3:6 type C-1 for chamber, RCC 1:2:4 type B1 for cover slab 50 mm thick, reinforcement 8 mm CTD bars @ 100 mm c/c both way, necessary form work, handle, charcoal dust 20mm dia GI med grade for watering and 40mm dia GI med grade earth lead protection pipes with funnel and wire mesh all complete all as specified and directed.

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 25 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC

Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessary fittings, solvents of size 20 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S&F CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

S&F CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC

Supply and fixing of Bib tap CP, Quarter turn with flange and aerator, fancy type Long body cast copper alloy with crutch or butterfly handle screwed for GI/civic pipe of size 15mm , complete all as specified and as directed by the Engineer-in-charge. (Make : Model No F2004152 of Cera or prayag/hindware)

Supply and fixing 15mm angle valve,quater turn with flange, with flange type chromium plated for fixing with CPVC pipe complete specified and as directed by the Engineer-in-charge. (Make : Model No: F2004201 of Cera or prayag/ hindware)

Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe ,all as per specified and directed (Make : Model No: F8030102 of Cera or prayag/hindware/Jaguar).

Supply and fix concealed stop cock regular body, Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm and taking down old unserviceable one, complete all as specified and as directed by the Engineer-in-charge. (Make : Model NO: F2002362 of Cera or equivalent of prayag/hindware/Jaguar)

Supply and fixing of swivel overhead shower of PTMT any colour with shower arm 15 mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe and all as specified and as directed by the Engineer -in-Charge. Make: Cat Part No. F7020101 of Cera or equivalent

Supply and fixing CP angle cock, self closers/ prismatic with wall flange for urinal pots to fixed in 20/15mm pipe, complete all as specified and directed by the Engineer -in-charge Make: (Model No F9020203 of CERA or equivalent

Supply and fixing of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of capacity 1000 litre

Supply and fixing in of Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of capacity 500 litre

Supply and fixing PVC connection pipe 16mm dia (outer 450mm long cold water and complete with brass union on both sides to suit 15mm GI pipe complete all as specified and directed by the Engineer-in-charge.

Taking down old PVC connection complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 25 mm complete all as specified and as directed.

Taking down old GI/ CPVC pipe of size 20 mm complete all as specified and as directed.

Taking down old rotational moulded polythene water storage tanks of capacity 1000 litres complete all as specified and as directed.

ANIE JOHN CONTRACTORS

REIGN CONSTRUCTIONS

MS BUILDERS