REPAIRS TO TILING, JOINERY, SANITARY AND ALLIED SERVICES AT MIL STN AGARTALA

Amount

Schedule'A' Part-I: B&R works

Taking down chowkat with shutter/without taking off shutter from the frame exe 1.50 Sqm but n.exc 4.00 Sqm each complete all as specified and directed.

Taking down shutter from the frame exe 1.00 Sqm and n exc 2.0 Sqm each complete all as specified and directed.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x60 mm complete all as specified and directed.

S&F for pressed steel frames for doors with one or more rebates including necessary lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x60 mm complete all as specified and directed.

S&F 35mm thick Factory made Flush shutter solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

S&F 35mm thick 2nd class hard wood skeleton shutter open rebated & prepared to receive glass, gauge etc (with out sash bars) edges of framing plain,chamfered or rounded fitted with cut and mitred beads for securing glass, gauge etc complete all as specified

S&F Factory made Plain framed, panelled shutter 35mm thick (two panel) with lock rail & panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. 2nd Class HW rail & style of size as per IS: 1003 (Part I), kiln seasoned & chemically pressure treated complete all as specified and directed.

Refixing of shutter exc 1 Sqm but n. exc 2 Sqm after necessary repairs in the same opening all as specified and as directed.

M & L preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer exc 10 cm width or girth complete all as specified and as directed.

M & L for PCC type C-1 (1:3:6) using12.50mm graded stone aggreagate as in bed block for fixing of hold fast filling concrete in door frame incl necessary form work complete all as specified.

S&F Powder coated anodised aluminium door air tight frame made of size 100 mm x45 mm of sheet thickness 1.5 mm with one or more rebate including joining cleat etc for fixing anodised aluminium door shutterfully panelled (two nos of panel each shutter) with 5.5 mm thick tinted glass shutter ,rail made 80mm x45 mm of sheet thickness 1.5 mm (top ,bottom ,middle and side rail) single /double leaf side hung type including nessary jointing cleat ,anodised aluminium fillet ,aluminium glazing clip with rubber gasket with aluminium fitting such as aluminium butt hinges 100 mm long 3 Nos on each shutter , aluminium anodised handle 150 mm ,2 nos D type for each shutter and locking 6 lever Make : harrison one on each door,All door fitting except cleat shall be ISI Marked

S &F in Repair 25mm dia mild steel chromium plated curtain rod fixing with brackets, stop, rollers complete as specified

Taking down chowkat with shutter/without taking off shutter from the frame n exe 1.50 Sqm each complete all as specified

S & F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.

S&F factory made Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawingcomplete all as specified .

S&F 100mm size type B-21 Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized complete all as specified.

S&F 125mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified and as directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type anodized complete all as specified .

S&F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified .

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified

S&F in repair 150mm long aluminium anodized barrel tower bolts of extruded section.

S&F in repair Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples complete all as specified and as directed

S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.

S&F factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete without glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete all as specified and directed.

S&F Powder coated aluminium window sliding type three track (2 glazed & one gauze shutter ) aluminium sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazing cleats, rubber packing , screws, handle, locking arrangement and 4.0mm thick plain/tinted glass and SS wire mesh and making good the surface complete all as specified .

S&F Powder coated aluminium louvered ventilators of size 600X600mm with glass louvers, without sash bars of aluminium sections weighing not less than 0.605kg/m for frame of size 40x20x2mm including necessary jointing cleats, glazing cleats, rubber packing , anodised aluminium snap beading,screws, anodised aluminium fittings and 4.0mm thick Frosted tinted glass fixed in panels with suitable locking arrangements and making good the surface complete all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work all as specified and as directed.

M&Lfor applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome complete all as specified

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads

S&F 3mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each complete all as specified and directed.

S&F figured glass, pin head type 4 mm thick in squares n.exc 0.50 Sqm in each pane etc complete all as specified and directed.

Taking down cement plaster on brick concrete surfaces including racking out joints hacking for key, scrubbing down with, water etccomplete all as specified and as directed.

M&L 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified.

M&L 10 mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces without using extra cement complete all as specified

M & L for preparation of new plastered surfaces and applying two coats of cement base paint over new plastered surfaces complete all as specified and as directed

M & L for preparation of new plastered surfaces and applying two coats of oil bound distemer on new plastered surfaces complete all as specified .

Supply & Fix in repairs vitreous china squatting pan " Orissa Pattern" size 580 x 440 mm white with integral foot rest including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) complete all as specified

S&F in repairs 10 Ltr capacity PVC valveless, syphonic action type Flushing Cistern, low level white with inlet ball valve float & handle including brackets & connection to pipes complete all as specified

S&F in repairs vitreous china wash basin, white, flat back, size 450x300m excluding taps, waste , chain & plug & porcelain stopper including brackets incl cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified .

S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed .

S&F in repair pillar taps 15mm dia bore fancy type with capstain heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified

S&F in repair 15 mm stop valves (angular type), cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed .

S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs complete all as specified and as directed.

S&F in repairs 15mm bore fancy type chromium plated bib taps with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed.

S&F in repair 15mm bore brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all specified and directed.

Supply and fix in repairs of size 125 mm brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified

S & F in repair Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as specified and as directed.

S& F in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified .

S&F 50mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or innfloors etc complete all as specified .

Taking up or down, steel tubing 20mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed

Taking up or down, steel tubing 15mm bore, and connection including cleaning for re-fixing and removal to store complete all as specified and as directed

Supply and fix 20mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified .

Supply and fix 15mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified .

Cutting chases, pinning in, making good to facings where required and pointing in CM(1:3) to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick wallcomplete all as specified

Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed

Supply and fix 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring loints, fixed to walls only integral water proofing compound complete all as specified and as directed

Supply and fix in repair 75 mm bore PVC (SWR) bends in any types with acess door complete all as specified and as directed..

Supply and fix in repair 110 mm bore PVC (SWR) bends in any types with acess door complete all as specified and as directed..

S&F in repair 110mm dia PVC (SWR) branch piece single (singleT) equal or unequal with acess door complete all as specified and as directed.

Supply and fix in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified .

Material & Labourfor light shade vitrified coloured tiles 10mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm in floors or skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles complete all as specified

Material & Labour for non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.18sqm but not exc 0.38 sqm in floors or skirting etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor tiles complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor tiles complete all as specified

M&L for glazed ceramic coloured tiles 350 x 250 x 7 /450 x300x7 mm thick on skiriting/ dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in CM (1:4) for laying tiles complete all as specified

Demolition of cement concrete of any description and in any position not otherwise specifically provided as specified .

M&L 25mm thick P.C.C (1:2:4) type B-0 using 12.50 mm graded stone aggregate as in floor finished fair & even complete all as specified and as directed.

NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc, required for complete and proper execution of the work. Refer Schedule 'A' notes for details.

M/S SWAPAN DEBNATH (BID ID -3182163)

Pranjit kar (BID ID -3182811)

SHRI RAJESH DEY (BID ID -3182499)

M/S PRITAM ENTERPRISES (BID ID -3182236)

M/S UTTAM GANGULY ENTERPRISE (BID ID -3182171)

SUMAN DEB (BID ID -3182697)

M/s Amrit Gope (BID ID -3182559)