8358 PERIODICAL SERVICES INCLUDING SMART PERIODICALS TO OTM ACCN AT STN BAREILLY UNDER GE(EAST) BAREIILY

Amount

M & L for complete removal of existing treatment by brooming down or steel wire brushing, scrapping down and applying two coat of cement based paint on old decorated or undecorated wall surface, complete all as specified and directed.

M&L for preparation of putty/ plastered surfaces of walls and applying two coats of oil bound distemper using roller complete all as specified and directed.

M&L for complete removal of existing treatment, and applying 1 to 1.5mm thick wall care putty on wall surfaces even and smooth complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M & L applying two coat of white wash on old decorated or undecorated ceiling surfaces including preperation of surfaces, complete all as specified.

M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls / roof projections including facia,cornices etc. and applying two coat of white putty and applying one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and accessories for applying Primer, should be able to spray in hard to reach areas and penetration of Primer, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 4 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower complete all as specified and directed.

M & L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed

M & L for one coat of synthetic enamel paint (any tint/shade) including preparation of old decorated steel surfaces of any description over 10 Cm width or girth not otherwise described.

Taking down cement or lime plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc from ground floor complete all as specified and as directed. Note :Cost of scafolding for taking down is incuded in this item

M & L for rendering 5mm thick in cement mortar 1:3 on fair faces of brick work or concrete surfaces as in ceilings complete all as specified

M & L for rendering 15mm thick on oher than fair faces of brick work or concrete surfaces (cement mortar 1:6) finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement for height exc. 3 m and not exc 15m from ground level complete all as specified and directed. (Note: Rate included for necessary scaffolding and arrangements for working)

M&L for 15mm thick rendering CM 1:4 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement for height n.exc 3 metre from ground level complete all as specified and directed. (Note: Rate included fir necessary scaffolding and arrangements for working)

M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas upto height not exc 12m from ground level in brick walls complete all as specified and as directed. (Note: Rate included for necessary scaffolding and arrangements for working)

M & L for preparing new surfaces of ceiling, plastered or unplastered and applying 3 coats of white wash to ceilings all as specified and as directed.

M&L for preparation of new plastered surface and applying two coat of distemper oil emulsion after preparation of wall surface applying with 3mm thick in two layer Birla/Asian wall Putty all as specified and directed

M & L applying two coats of cement based paint with primer on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M& L for preparation of newly plastered wall surfaces and appltying three coats of texture (Domasc/Rustic/super fine) finished painting with the following process the surfaces should be completely dry and free from loose particles including preparing the surface with emry paper 180 nos and wipring clean and applying one coat of primer and allow drying for 6 to 8 hours then smoothen the surface by filling dints with thin coat of acrylie wall putty after drying for 4 to 6 hours and preparing the surface with emry paper and clean and applying another coat of primer and allow drying for 6 to 8 hours and then emulsion 1 Ltr with 500 ml water and applying with brush follwed by rolling with sponge roller or filter roller, applying three coat with brush and roller with and interval of 3 to 4 hours between successive coat all as per manufactures instruction complete all as specified and directed. Note- Design approved by GE

S&F in repair PVC hollow interlocking wall paneling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cum density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement.

M&L for providing & fixing 10mm thick plaster of paris false ceiling bending as required shape with two coats of plastic emulsion paint over a coat of primer on decorated surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @750 mm C/C cross member 'U' shaped @450 mm c/c and perimeter of 'C' shaped GI wire mesh having aperture 6.5 mm with 26 gauge wire GI wire 6mm dia or more or FI 40 x 4mm thick for hanging arrangement with MS suspension, fastner spaced @ 450mm c/c in both direction the 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 Mtr height as required at site complete all as specified and directed.

S&f in repair PVC / WPC / CHARCOL interlocking wall paneling/ ceiling (LOUVERS SEAMLESS DESIGNER PLANK) with 3-5 mm thick UV sheet combination high grade PVC 100% termite and water resistant for 12-20 mm thick fixing with ss clip bolt or addhessive with aluminium framing/ grid with suitable fittings & matching angles wherever reqd.complete all specified and directed. Note- latest design , pattern approved by GE

M&L for plastic wolpin Polyvinyl Chloride Self Adhesive Sticker Wallpaper, any size on wall, any approval and size as per requirement incl fixing on wall surface should be completely dry and preparing the surface as per manufacturer instruction and finishing the surface complete all as per spd and directed

S&f in repair 5-10 mm thick PVC board for marking of quarter/bldg numbers including writing letters, figures, stops, commas, dashes, hypens, brackets etc with all necessary fitting / fixing into wall complete all as spd and directed. Note:- design including colour & size of boards, letters approved by GE

j u enterprises (BID ID -3156043)

M/S ARORA ENTERPRISES (BID ID -3154404)

D K THUKRAL AND SONS (BID ID -3165444)