REPAIR TO STREET LIGHT IN AOR AT AHMEDABAD

Amount

Excavation in trenches n. exc. 1.5mtr wide and n. exc 1.5 mtr in depth for for foundation, etc. n.exc 10 sq mtr on plan and getting out in soft / loose soil complete.

Excavation in trenches n. exc. 1.5mtr wide and exc 1.5 mtr & n. exc. 3.00mtr in depth for for foundation, etc. n.exc 10 sq mtr on plan and getting out in soft / loose soil complete.

Returning filling with earth obtained from excavation including spreading watering and consolidation in layers not exceeding 25 cms thick complete.

Removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete.

S&F in replacement steel tubes light grade galvanized 40 mm bore ISI marked with all fittings fixed to walls & poles with necessary clamps nut bolt etc. as required complete.

S&F in replacement steel tubes light grade galvanized 40 mm bore ISI marked with all fittings fixed to floors / road crossing as required complete.

Supplying, laying or fixing or passing through pipe, testing and commissioning in replacement 1100 volts grade ISI marked XLPE insulated and PVC sheathed steel tape / wire armoured underground stranded aluminium conductor cable of size 10 sqmm 4 core complete.

Supplying, laying or fixing or passing through pipe, testing and commissioning in replacement 1100 volts grade ISI marked XLPE insulated and PVC sheathed steel tape / wire armoured underground stranded aluminium conductor cable of size 16 sqmm 4 core complete.

Dismantling concrete LT poles and M&L factory made Steel tubular swaged poles with cast iron base plate, finial taper plug, bolts, nuts and screws, type 410 SP-31 (9.00 metres long) confirming to IS 2713 & erected true vertical position duly factory painted with two coats of black bituminous paint internally through out and externally for embeded portion and applying two coats of synthetic enamel aluminium paint over one coat of red oxide primer on remaining exposed surfaces after errection & painting with synthetic enamel paint of colours black and yellow alternate strips of 30cm width upto 1.5 mtr from the top of coping including making suitable holes where required & Pole cap 0.30 m long externally fitted on pole top duly welded all as shown on TD drawing complete. Note : Excavation & earth work & PCC work shall be measured & paid separately.

M&L for PCC (1:4:8) type D2 using 40 mm graded stone aggregate in sub base for pole complete.

M&L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate in foundation filling around pole complete.

M&L for PCC (1:2:4) type B2 using 40 mm graded stone aggregate in coping 500mm high & tapered half of hieght complete.

M&L for Continuous brick edging; with width equal to the width of the brick; laid dry on end vertically using sub class 'B' bricks of old size (230x115x75 mm) as protection to cable in trenches complete

M&L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable complete.

Taking down any type HPSV fittings and Supply, installation, testing and commissioning LED street light fitting including driver with energy saving and enviornmental friendly made up of pressure die cast aluminium housing with high power LED 70 Watt as lighting conforming to IS-10322 (Part 5/Section 3) 2012 and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and IK07 with 10KV inbuilt Surge protection device including three core copper wire 1.5 Sqmm PVC sheathed, insulation tape, screw, clamps, nuts and bolts etc. & similar to cat no LSTP-70-CDL of make crompton complete.

Taking down any type HPSV fittings and Supply, installation, testing and commissioning LED street light fitting including driver with energy saving and enviornmental friendly made up of pressure die cast aluminium housing with high power LED 90 Watt as lighting conforming to IS-10322 (Part 5/Section 3) 2012 and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and IK07 with 10KV inbuilt Surge protection device including three core copper wire 1.5 Sqmm PVC sheathed, insulation tape, screw, clamps, nuts and bolts etc. & similar to cat no LSTP-90-CDL of make crompton complete

Taking down any type of unserviceable post top light and S&F of LED post top lantern energy saving with symmetrical light distribution, spun aluminium canopy with clear acrylic diffuser, high power LED 25 watt and fixing accessories & similar to cat no LPTO-25-CDL of make crompton complete.

S&F in replacement LED flood light fitting 70 Watts, having Pressure die cast housing with IP66 Efficient, protection with heat resistant toughned glass with individual LED lenses (Non COB) including MS Clamps, nut and bolt & making connection with street light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 Sqmm & similar to cat no LFL-70-CDL/70 of make crompton complete.

S&F in replacement LED flood light fitting 120 Watts having Pressure die cast housing with IP66 Efficient, protection with heat resistant toughned glass with individual LED lenses (Non COB) including MS Clamps, nut and bolt & making connection with street light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 Sqmm & similar to cat no LFLN-120-CDL/60 of make crompton complete.

Taking down of HPSV/MV/MH flood light and S&F LED flood light fitting 200 Watts having Pressure die cast housing with IP66 Efficient, protection with heat resistant toughned glass with individual LED lenses (Non COB) including MS Clamps, nut anf bolt & making connection with street light box or OH line using PVC insulated and sheathed single core multi stranded alumn conductor cable of size 1.5 Sqmm & similar to cat no LSFO-100-CDL/60 of make crompton complete.

S&F in replacement Polystyrene body size 155 x 210 x 92mm, IP 66 cable junction box with connector metric knock outs on all sides for cable entry including cable glands, 16 Sqmm Elemex Connector including all connections & similar to cat no DK 1600 G of Make Hensel complete

S&F in replacement street light bracket made of GI pipe light grade bend in shape of 40 mm dia, 2.5 m long and clamped with 2 pairs of 40 x 6 mm flat iron clamps, nuts / bolts / washers & painted with 2 coats of aluminium paint over a coat of red oxide primer on clamps complete.

S&F in replacement street light bracket made of GI pipe light grade bend in shape of 40 mm dia, 1.5 m long and clamped with 2 pairs of 40 x 6 mm flat iron clamps, nuts / bolts / washers & painted with 2 coats of aluminium paint over a coat of red oxide primer on clamps complete.

S&F in replacement PVC insulated & sheathed, multistranded copper conductor industrial cable 1.5 sqmm three core 1100 volt grade from Junction box to street light fitting as required complete.

M&L for Painting of existing LT street light swaged poles 9.0 mtr long of any type externally above coping including street light brackets / clamps etc with One coat of best quality aluminium paint & making alternate black & white colour bands of 30 cms width upto a height of 1.5 m from pole coping with synthetic enamelled paint complete.

M&L for Painting of existing LT street light swaged poles 8.5 m long of any type externally above coping including street light brackets / clamps etc with One coat of best quality aluminium paint & making alternate black & white colour bands of 30 cms width upto a height of 1.5 m from pole coping with synthetic enamelled paint complete.

Labour & tools for trimming tree branches upto 100 mm girth of any location around existing LT street light poles giving clearance of 1.5 m on all sides complete. (Note:- Trimming of tree branches irrespective in numbers in each tree shall be measured as one unit).

Labour and tools for rectification of defects in any type of street light fittings / security light fittings under GE (A) Ahmedabad including sundry items like insulation tapes, nuts, bolts, washers, holders of LED /HPSV/ MH/T5 fittings, LED driver, starters & bipin holders etc. of tube light fittings complete.

S&F in replacement Electronic LED Driver Suitable for 70 Watt street/Flood lights fitting complete.

S&F in replacement Electronic LED Driver Suitable for 70 Watt street/Flood lights fitting complete

Taking down street light fitting or flood light fitting any type and any rating from poles, walls or any other indicated situation / location after disconnecting electrically, seggregating serviceable and unservicable fittings. Keeping aside serviceable for reuse at same location or any other location with in the zone and removing unserviceable from site complete.

Labour & tools for horizontal boring through road / path / floor for passing UG cables by using trench less technology for laying upto 100mm dia pipe complete. Note : GI / DWC pipe will be measured and paid seperately.

S&F in replacement rigid non metallic PVC conduit 20mm dia medium grade ISI marked ivory colour alongwith accessories for fixing on pole/laying in garden including minor excavation for protection of service wire / cable etc. complete.

S&F in repairs framed work such as grills, gratings etc, with ends of bars shouldered and / or reveted or forged into spikes, framed guard bars frame work of piller lights and similar work conforming to Fe 290, Gde E-165 complete.

M&L in repairs fabrication of welded steel wire fabric and fixed to steel members not exc to 4 kg per sqm size as required complete.

Abhishek Enterprises

SATISH ELECTRICALS