CERTAIN REPAIR SUCH AS JOINERY SANITARY FITTING FLOORING PLASTERING REPAIRS TO ROOF TILES CERTAIN ROOFING WORKS AND OTHER MISC WORKS AND REPAIRS TO DRAIN FENCING AND CLEANING OF SEPTIC TANK AT POCKET A AND B AT HQ SAC UNDER GE AF TRIVANDRUM

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M & L for virified Ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set ausing spaces and epoxy grouted all as specified and directed.

M&L for Virified Ceramic tiles light shade 8-10mm thick (square/ rectangular) polished, area of each tiles exceeding not exc 0.36 sqm on vertical surfaces such as skirtings, dados and risers to steps etc. set and jointed using spaces and epoxy grouted and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) 25mm thick as in floor subbase for receving of floor tiles complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed

M&L for rendering 10mm thick on fair faces of brick work in CM 1:4 as backing coat to receive tiles complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for 20mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

Demolitioin of brickwork or stone/ boulder masonry, built in cement or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ old size bricks straight or curved on plan exc 6 m mean radius in CM 1:6, complete all as specified and directed.

Brickwork with subclass ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in M 1:4, complete all as specified and directed.

Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair face of brick work or concrete surface in CM 1:4 including finished the surface even and smooth with out using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of weather coat paint over a coat of primer complete all as specified and directed.

M&L for preparation of new treated wall surface and applying two coats of oil emulsion distemper over a coat of alkali resisant primer complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement etc, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L prepartion of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome complete all as specified and directed.

Taking down cement plaster including existing roof treatment or fillets on roof surfaces and wall surfaces complete, racking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exc 250m and not exc 500m all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair surfaces of brick masonry or concrete surface, finished the surface even and smooth with using extra cement incl using WPC as per manufacturers instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only liquid waterproofing compound (ISI grade only) all as specified and directed.

M&L for applying two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating on existing roof screed/plaster surface including equipments and supervision charges in following step by

(i) Roof substrate must be pressure-washed with water with, a minimum working pressure of 1,400 psi is to be used to remove all dirt, dust, chalking and waste products, complying with standard specification and as directed by the Engineer-in-Charge.

(ii) Inspect for cracks over roof screed, roof wall junction, water drain inlets/outlets if any, and clean and moisten them. Crack’s width should be wide up to 5-6 mm with mechanical cutting machine and Apply bond coat of SBR Latex in the ratio of 1:1 (URP 1: Cement 1) followed by groove should be filled with PMM by preparing Polymer modified mortar of CM 1:1 (Silica sand size ≤ 300microns) admixed with SBR Latex at a dosage of 15% of cement all as specified and directed.

(iii) Providing 300mm x 300 mm Square / rectangle upstand of M20 grade concrete or with PMM around mechanical equipment like HVAC, airconditioning, solar panels. Etc. Apply a coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating allow to cure for 3-4 hours and followed by apply two coats two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating reinforced with 45 Gsm glass fiber mesh or geo textile without dilution in the interval of 4 -6 hrs. Apply Hybrid PU Sealant at around the junction of fabricated stand inserted and wall mounting mechanical fixtures all as specified and directed.

(iv) Providing Minimum 50mm thick angle fillet with CM of 1:3 admixed with SBR Latex at a dosage of 12-15% of Cement and a bond coat of SBR Latex mixed with Cement at a ratio of 1:1.(v) Premix hybrid Polyurethane waterproof coating components A and B with an electric double paddle mixer stirrer for 2-3 minutes at a slow speed. The concrete surface must be brought into surface saturated dry condition (SSD). Providing and apply first coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating to the existing screed/plaster at a rate of 0.5Kg/sq.mt/coat. Place a 45-GSM glass fiber mesh or 200- 225 GSM raw mesh between the first and second coats while the first coat is still wet. Allow the first coat to dry for 3-4 hours. Apply the second and third coats of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 3-4 hours after application. Ensure that no void surface is left untreated or uncoated. All coats should be applied in directions perpendicular to each other, ensuring the correct consumption of material, resulting in a total dry film thickness of 1000 microns with system coverage in three undiluted coats at a rate of 1.50 Kg/ sq.mt/coat. Allow the system to air cure for 5-7 days minimum all as specified and directed.

(v) Premix hybrid Polyurethane waterproof coating components A and B with an electric double paddle mixer stirrer for 2-3 minutes at a slow speed. The concrete surface must be brought into surface saturated dry condition (SSD). Providing and apply first coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating to the existing screed/plaster at a rate of 0.5Kg/sq.mt/coat. Place a 45-GSM glass fiber mesh or 200- 225 GSM raw mesh between the first and second coats while the first coat is still wet. Allow the first coat to dry for 3-4 hours. Apply the second and third coats of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 3-4 hours after application. Ensure that no void surface is left untreated or uncoated. All coats should be applied in directions perpendicular to each other, ensuring the correct consumption of material, resulting in a total dry film thickness of 1000 microns with system coverage in three undiluted coats at a rate of 1.50 Kg/ sq.mt/coat. Allow the system to air cure for 5-7 days minimum all as specified and directed.

The material should conform to the specified technical properties: a) Tensile Strength with Fiber ≥9N/mm2 as per ASTM D 2370 b) Elongation at break ≥ 200% as per ASTM D 2370 c) Crack bridging ability ≥ 3mm as per EN 1062-7-2004(A) d) solid content ≥55% as per ASTM D 1,644-2001 e) Abrasion resistance 15mg confirming to ASTM D 4060 f) Shore-A 65 as per ASTM D2240 g) Tear Resistance with Fiber 40N/mm as per ASTM D 624. The waterproofing coating shall be applied over the entire horizontal surface and extended onto the vertical surface of the parapet wall, as per the manufacturer methodology as directed by GE/Engineer-in-Charge. Note: All waterproofing work suggested above shall be carried out by the in house application wing of the manufactuer or skilled waterproofing contractor under the guidance of a technical expert from the manufacturer. The technical expert should audit the quality of the waterproofing work and submit the report. The contractor should submit the skilled project waterproofer certificate issued from the manufacturer while receiving the work order all as specified and directed.

Dismantling single layer mangalore pattern or similar tiles in roofing incl ridge tiles complete all as specified and directed.

M&L for cement mortar fillets of 40 mm wide and 20 mm thick for laying mangalore pattern tile on roof, in cement mortar 1:4, complete all as specified and directed.

M&L for Roof tiles Mangalore pattern inter locking at side joints, laid dry, complete all as specified and directed.

All as per item No 34 above but except tiles

M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and pointed in cement mortar 1:6 all as specified and directed.

All as per item No 36 above but except tiles

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/blankets, any thickness, including any type frame work and cover fillets etc, complete all as specified and directed

M&L for providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over GI frame work seamless perimeter 0.55 mm thick with two unequal flangesof 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and including hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified

M&L for preparation of new treated of ceiling surfaces and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, resecuring or easing and refixing in the same opening complete all as specified and directed.

Taking down Chowkhats or frames not exc. 1.5 sq. m each (without taking off shutters from the frames) all as specified and directed.

Taking down Chowkhats or frames exc. 1.5 sq. m and n exc4.0 sqm each (without taking off shutters from the frames) all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 1 Sqm and n exc 2.0 sqm each complete all as specified and directed.

Taking down shutters of any description exceeding 2.0 sqm each complete all as specified and directed.

Taking down aluminium shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each, and refixing after resecuring, making good and replacing hinges, pivot etc as required in the same opening complete all as specified and directed.

Taking down aluminium frames of doors/windows/sliding windows/ ventilators not exc 1.5 Sqm each (without taking off shutters fro the frames) complete all as specified and directed.

Taking down aluminium frames of doors/windows/sliding windows/ ventilators exc 1.5 Sqm & not exc 4.0 Sqm each (without taking off shutters fro the frames) complete all as specified and directed.

Taking down aluminium shutters of any description not exceeding 1 Sqm each complete all as specified and directed.

Taking down aluminium shutters of any description exceeding 1 Sqm and n exc 2.0 sqm each complete all as specified and directed.

S& F power coated anolised aluminium frame for doors, windows, ventilators/ partitions with one rebates including joint cleat for fixing etc complete all as specified and directed.

S& F powder coated anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and directed.

S & F powder coated aluminum door shutters, aluminum sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door , hinges anodised aluminium snap beading screws etc complete all as specified and directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-inCharge. (Rate inclusive of frosred Glass pane or PVC sheet which is required)

Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made all as specified and directed.

Supply and fixing factory made uPVC white colour Two track two panels sliding window above 1.50 m height made of (big series) fram 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of window above 2.50 sqm. upto 4.00 sqm.) comprising of uPVC multichambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads, uPVC extruded interlocks and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle on one side of extreme panel along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) touch lock with hook (if required for wire mesh panel), stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately)

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. ((Rate inclusive of Glass pane).

Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Rate inclusive of Glass pane and wiremesh )

Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints including repairs to distrubed existing surfaces complete all as specified and directed.

S&F mild steel bands, straps, hooks and pintle hinges large hasps and staples chins, clamps, pulins etc confirming Fe 290 Gde -E-165 complete all as specified and directed.

S & F second class hardwood plain, framed, panelled shutters of 40mm thick (any number of panels), with panels of timber flat on both sides (feather edges) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed.

S & F second class hardwood glazed and skeleton shutters, 35 mm thick, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; fitted to chowkats complete all as specified and directed.

S & F second class hardwood glazed and skeleton shutters, 30 mm thick, open rebated and prepared to receive glass, gauze, etc., divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers; edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; fitted to chowkats for windows, ventilators, etc. provided with stiles and rails complete all as specified and directed.

S & F 40mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F mild steel work as framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel 100 mm long complete all as specified and directed.

S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodized, ISI marked complete all as specified and directed .

S & F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminum alloy complete all as specified and directed.

S & F in repairs aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminum alloy complete all as specified and directed.

S & F butt hinges medium weight cold rolled mild steel 75 mm long complete all as specified and directed.

S & F 100 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S & F 100 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

M & L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

S & F in repair alumimum extruted section body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 801 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F in repairs double action floor spring hydraulically regulated, made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for aluminium doors openable in two directions complete all as specified and directed.

S&F 25mm dia decorative stainless steel curtain rods including supporting brackets and end caps/dome all as specified and directed.

S&F in repair floor door stopper of anodised aluminium alloy body and tongue, with hard drawn steel pring, end fitted with rubber bush (folding type), 140mm overall length of cover plate complete all as specified and directed.

S&F in repairs magnetic door stopper for cupboard, complete all as specified and directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section and size 150 mm long complete all as specified and directed.

S & F in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised of size 150 mm long complete all as specified and directed.

S & F in repairs 100 mm long extruded aluminium alloy handles, fabricated type, anodised, ISI marked complete all as specified and directed.

S&F in repairs aluminium weather strip with Nylon brush insert suitable for bottom of door shutters of wooden/aluminum all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with aluminium wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F plain sheet glass 3 mm thick ordinary quality and glazing with oil putty/beading etc n.exc 0.50 Sqm each all as specified including removal of old broken glass

S&F figured glass 3 mm thick pin head type and glazing with oil putty/beading in squares or any size shape and size fixed to at any sections complete all as specified and directed.

S&F plain sheet glass 4 mm thick ordinary quality and glazing with oil putty/beading etc n.exc 0.50 Sqm each all as specified including removal of old broken glass

S&F plain sheet glass 4.8 mm thick ordinary quality and glazing with oil putty/beading etc exc 0.50 Sqm each all as specified including removal of old broken glass

M & L 18/19mm thick Prelaminated plywood, prelaminated on both sides with decorative choice laminations, fixed with screws to in cupbords, warddrops, kitchen covered cabinet etc around the plywood/ teakwood lipping shall be finished with two coats of French polish.

S&F in repairs Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed all as specified and directed.

S&F in repairs Stainless steel peg rail having 6 Nos hook for hanging cloth complete all as specified and directed.

S&F in repairs 75mm long half folded auto hinges complete all as specified and directed.

S&F in repairs venetian blind using cotton/Nylon fabric of size as required for windows/ Ventilators horizontally rolling up and down with double layer cloth including rolling device on top and power coated aluminium double layer pipe at bottom, incl operating rope etc all as specified and directed.

S&F in repairs bathroom cabinet with mirror 250x400 mm size, including removal of existing cabinet complete all as specified and directed.

S&F in repair plastic water closet seat cover, closed pattern with flat bottom seat cover, mild steel chromium pated or aluminised hinging device and colour as approved complete all as specified and directed.

S&F in repair stainless steel plate rack of size approved pattern and size 0.90 x 0.60m and thickness of sheet 1mm complete all as specified and directed.

S&F in repair stainless steel plate rack of size approved pattern and size 1.20 x 0.90m and thickness of sheet 1mm complete all as specified and directed.

S&F in repairs stainless steel soap tray fixed with brass screws complete all as specified and directed.

S&F in repairs fancy type Bib taps, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe 15mm bore or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs Self-closing pillar taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed to 15mm bore dia pipe complete all as specified and directed.

S&F in repairs Pillar taps,fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed to pipe complete all as specified and directed for 15mm bore pipe

S&F in repairs Stop valve/angle vavles, cast copper alloy, fancy type chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repairs chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repairs glass cornershelf made out of 5 mm thick glass guarded with CP brass guards complete all as specified and directed.

S&F in repairs brass chrominium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge.

S& F in repairs health faucet, CP with flexible arm for pipe 15mm bore dia complete all as specified and directed by Engr-in-Charge.

S&F in repairs Grating doom 100 mm dia with waste hole of PTMT (minimum weight 40 grms) complete all as specified and directed.

S&F in repairs 32 mm dia waste pipe suitable for wash hand basin and sink complete all as specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern of 10 ltr capacity, low level, with inlet ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull or lever, if any complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, over all size of 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repairs 32 mm dia waste coupling of PTMT half or full thread suitable for kitchen sink or wash hand basin (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) including connect to outgoing pipe and flush pipe (excluding fixing bolts, flushing cistern) complete all as specified and directed by Engr-in-Charge.

S&F in repairs straight glass shelf made out of 5 mm thick glass graded with CP brass guards complete all as specified and directed by Engr-in-Charge.

S&F in repairs toilet paper holder, brass, CP brass fitted to wall complete all as specified and directed by Engr-in-Charge. Make: Jaquar/CERA/Prayag or equivalent

S&F in repairs 20mm dia bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and directed.

S&F in repairs 32mm dia bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipe of pressure rating 10kgf/cm2 fixed complete to walls, ceilings or in floors etc including necessary scafolding where is required, complete all as specified and directed.

Removing bib taps, stop cocks, pillar taps, angle cock etc and refixing in the same position after repairs/replacement of washer/plunger etc for arresting leakages complete all as specified and directed. Note: Rate of washer/Plunger etc shall be deemed to be included in contractor quoted rate.

S&F in repairs sprindle for stop cock complete all as specifed and directed.

Cleaning of pipes of any dia after opening of bib taps, stop cock, angle cock, pillar taps and gate valve etc and refixing in same position after cleaning of pipes complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 1000 ltr incljuding locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs PVC overhead tank cover for tanks of capacity 500 ltr incljuding locking bolts and securing the hinges in proper position complete all as specified and directed.

S&F in repairs tank connector, PVC suitable for fixing to outlet pipe of any description and 32mm dia bore commplete all as specified and directed.

S&F in repairs PVC gate valve with handle, fixed both end for PVC pipe of 32mm dia bore complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks of capacity exc 500 and not exc 1000 ltrs and from mouth of circulation pipes etc complete all as specified and directed.Note: Date of cleaning should be endorsed in the tank with suitable paint after cleaning

Cleaning and removing all scale and dirt etc from tanks of capacity exc 250 and not exc 500 ltrs and from mouth of circulation pipes etc complete all as specified and directed.Note: Date of cleaning should be endorsed in the tank with suitable paint after cleaning

S&F in repairs PTMT ball valve, high pressure, with polyethene float and fly nut complete, screwed for iron pipe of brass ferrule of 25mm dia bore complete all as specified and direceted.

Dismantling water tanks exc 250 ltr and not exc 500 ltr complete all as specified and directed.

Dismantling water tanks exc 500 ltr and not exc 1000 ltr complete all as specified and directed.

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 and directed.

S&F 750 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 and directed.

S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-1 and directed.

S&F looking mirror 600x450 mm size fixed with aluminium frame with 6mm ply wood/black board/AC building board fixed with screw fixed repairs complete all as specified and directed by Engineer in charge.

Repairs only to flush pipe, soil waste pipe of WC for arresting leakage by providing bushes, washers, white cement, putty etc complete all as specified and directed.

Arresting leakage from joints between sink and granite slab by providing white cement, putty, M Seal etc complete all as specified and directed.

Repairs only to high/low level flushing cistern and arresting leakage of its internal fittings/washers complete all as specified and directed.

S&F in repairs internal fittings such as ball valve and float for flushing cistern complete all as specified and directed.

M& for Plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in path/hard standing, surface channel and drains, complete all as specified and directed.

M&L for Pre-cast cement concrete block (PCC 1:3:6 Type C-1) masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

M&L for Boulder pitching, pitching is grouted with cement and sand mortar 1:6, complete all as specified and directed. Note : Thickness of stone shall be 20cm.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 (Except stone) complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses Hammer dressing with maximum depression on face from straight edge held against the dressed surface not exc 40mm granite or trap stone complete all as specified and directed.

M&L for preparation of new surface of wall and applying two coats of oil emulsion distemper on wall complete all as specified and directed.

M&L for PCC 1:2:4 type B1 (20mm graded stone aggregate) as in coping complete all as specified and directed.

M&L for chequered cement concrete tiles 300x300x20mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and no pigment complete all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D2, using 40mm graded stone aggregate as in floors complete all as specified and directed.

S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigment. complete all as specified and directed.

All as per item No.157 above but except tiles complete all as specified and directed.

Supply and spreading coarse aggregate from 12.5mm to 4.75mm not exc 25cm thick complete all as specified and directed.

S&F mild steel work as hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F mild steel work as framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F rolled mild steel work as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground embedded in concrete, brick work, masonry etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for PCC 1:3:6 type C2, using 40mm graded stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Providing reinforced cement concrete type B-l, 1:2:4(20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm and not exc 250 sqcm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Dismantling of chain link fencing any type and any size complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long, diameter of neck 11 to 15mm complete all as specified and directed.

S&F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured complete all as specified and directed.

Cleaning of septic tank by removing man hole cover including removing of earth/soil spread over the cover if any, from the frame of a septic tank and receiving chambers, pumping out liquid contents and excavating night soil sediments and waste materials etc, clearing off up to the bottom floor and dispose off the materials to a distance not exceeding 100 mtrs from the septic tank to a pit suitably as directed by Hygenic authorities excavated to contain night soil, place back the man hole cover to its original position and removing all vegetable roots if any and making good surroundings complete all as specified and directed, including the cost of excavating the pit and refilling back. Note:-The measurment shall be inclusive of water content from bottom of tank to the invert level of outlet pipe, complete all as specified and directed.

Opening manholes of septic tanks, removing night soil, other sediments, solid waste and liquid waste in any condition by pumping or any other mechanical means, cleaning internal surfaces of the tank with clean water and refixing the manhole on completion of work complete all as specified and directed. Notes:- (a) The night soil, sediments, solid and liquid waste in any condition removed from septic tank shall be taken away from respective vicinities and premised in closed containers/converyance and disposed off out of Defence land. (b) Disposal of the same shall be the responsibility of the Contractor. Disposal of waste shall be made in accordance with the regulations of authorities concerned without any extra expediture to the Government.

Material and labour for Cleaning of existing sewage system/pipe line 100/150/200mm dia (length of pipe line manhole to manhole not exceeding 15mtr) including cleaning of manholes (any type rectangular/square/circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system with manual labour (rodding manually) or by mechanically sewage suction pump (at contractor;s discretion as required at site) making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size from the line/clony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge. Note :- Disposal of the same shall be the responsibility of the Contractor. Disposal of waste shall be made in accordance with the regulations of authorities concerned without any extra expediture to the Government

Material and labour for Cleaning of existing sewage system/pipe line 100/150/200mm dia (length of pipe line manhole to manhole exceeding 15mtr but not exceeding 30mtr) including cleaning of manholes (any type rectangular/square/circular) located in different situations/sites, taking off the manhole cover (CI or RCC) and placing in the same original position after getting out liquid/sludge/solid contents from the manholes/sewage line and complete perfect function/running/flowing condition without any obstruction by removing all blockage in system by mechanically sewage suction pump making it fully functional to the entire satisfaction of Engineer-in-charge including removing of all wastes, solid or liquid sludge through closed container and depositing the sludge in a pit (at empty/open area) of suitable size from the line/clony area where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified and as directed by Engineer-in-Charge. Note :- Disposal of the same shall be the responsibility of the Contractor. Disposal of waste shall be made in accordance with the regulations of authorities concerned without any extra expediture to the Government

Cleaning SWG/PVC/CI pipe sewage line manually or mechanically using cleaning rod or compressor and removing foreign material after clearing existing blockage for 75mm dia pipe in vertical walls/floors complete all as specified and directed.

Cleaning SWG/PVC/CI pipe sewage line manually or mechanically using cleaning rod or compressor and removing foreign material after clearing existing blockage for 110mm dia pipe on vertical walls/floors complete all as specified and directed.

M&L for surface dressing not exc 15cn deep in soft/loosed soil with grass around the manhole, soak well, drain and septic tank all as specified and directed.

Material and labour for Cleaning/removal of blockage from bathroom, kitchen, WHB and urinals including connected Nahani traps / gully traps/floor traps, grating of trap, waste pipes, pipe in any length upto Ist manhole etc choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users, including refixing of oval assess door covers with new nuts & washers, refixing manhole covers and for making good damaged surfaces of sorroundings of nahani trap, Gulli trap/floor traps etc with CM 1:3 or white cement complete all as directed by Engineer in Charge. Note :- Obtained waste materials shall be disposed to a distance not less than 100 mtrs as directed by Hygenic authorities) and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases complete all as specified and directed.

Material and labour for Cleaning/removal of blockage from EWC/IWC (any type) including connected traps (any type), pipe in any length upto Ist manhole etc choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users, including refixing of oval assess door covers with new nuts & washers and refixing manhole covers, complete all as specified and as directed by Engineer-in-Charge. Note :- Obtained waste materials shall be disposed to a distance not less than 100 mtrs as directed by Hygenic authorities) and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases complete all as specified and directed.

Excavation in trenches n.exc 1.5 M wide and n exc 1.5 M depth and getting out in hard/dense soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2, using 40 mm graded aggregate in foundation, mass concrete complete all as specified and directed.

S&F in repairs 150 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in walls or floors complete all as specified and directed

M&L for cement concrete bed to drain pipe 150 mm dia in cement concrete 1:3:6 type C2 including packing under the haunching on sides all as directed and specified

S&F in repairs 50mm bore Unplasticized PVC pipes of pressure rating 10 kgf/sqcm in repairs complete all as specified and directed

S&F in repairs 75 mm, bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floors etc and including necessary scafolding where is required, complete all as specified and directed.

S&F in reapirs PVC (SWR) gully trap 125/110 mm setting and jointing with solvent cement and making good the surfaces all as directed and specified

S & F in repair 110 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal etc, complete all as specified and directed.

S & F in repair 75 mm bore PVC(SWR) bends of any radius etc, complete all as specified and directed.

S & F in repair 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal etc, complete all as specified and directed.

Returning, filling ramming etc in layers n.exc 25 cum including levelling, watering etc complete all as directed

Removing excavated materials not exc 50 Mtr and depositing where directed at level n. exc 1.5 Mtr above from the starting point complete all as specified and directed.

M&L of cement concrete type B1 1:2:4 20mm graded aggregate as in surface channels, benching inside manholes complete all as specified and directed

Demolition for cement concrete (reinforcement cut as required to facilitate demolition) is reinforced of any description and in any position not otherwise specifically provided for all as specified and directed.

S&F mild steel TMT bar 6 to 8mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm including clips, complete all as specified and directed.

M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and directed.

Supply and fixed in repair SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation) sizeof cover 600 x 600mm/ 700 x 700mm confirming to IS 12592, fixed in cement concrete 1:2:4, complete all as specified and directed.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors ,area of each tile exc 0.11 sqm but n.exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed

Archana Transport (BID ID -3361162)

Dhanyaconstructions (BID ID -3368978)

DEFT GROUP ELECTROMECHANICAL (BID ID -3367173)