03/2024-25/EDCR Replacement of Jarjer/Damaged wire, construction and bifurcation of 11 KV line and other System improvement works under Business Plan 2024-25, EDD-I, Rampur.

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

Jointing Kit (indoor)

Jointing Kit (outdoor)

11 KV XLPE Jointing Kit

3-Phase Distribution Box

MS Angle for Gaurding

MCCB for 630 KVA

LT DT Box for 250 KVA T/F

LT DT Box for 630 KVA T/F

33 KV X-Arm

11 KV X-Arm

ST Pole 11 Mtr

33 KV Double T/F Control Pannel

33 KV Fuse Set

33 KV Lighting Arestor

STP Pole 13 Mtr Long

PCC Pole 8.5 Mtr Long

11 KV 3*185 Sqmm XLPE Cable

11 KV 3*300 Sqmm XLPE Cable

LT ABC Cable 3x95+1x95+1x16 mm

GI wire 6 Swg(kg)

GI wire 10 Swg(kg)

ACSR Rabbit Conductor

ACSR Dog Conductor

Earthing of Pole

Stay set Complete

Polymeric 33 KV Pin Insulator with Pin

Polymeric 11 KV Pin Insulator with Pin

Polymeric 11 KV Disc Insulator with fitting

11 KV Relay Scrap(Recived Back Site to Store)

33 KV Double T/F Control Pannel(Recived Back Site to Store)

old and used Weasal (Recived Back Site to Store)

33 KV Fuse Set(Recived Back Site to Store)

33 KV Lighting Arestor(Recived Back Site to Store)

GI Scrap (in KG)(Recived Back Site to Store)

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

13 Mtr long STP Pole

11 Mtr long STP Pole

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

13 Mtr long STP Pole

11 Mtr long STP Pole

8.5 Mtr long PCC Pole

Providing & Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Providing and Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs.

fixing of 33 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.

laying ,stringing and binding of ACSR Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of 11 KV 3*185 Sqmm XLPE Cable with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of 11 KV 3*300 Sqmm XLPE Cable with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT ABC Cable 3x95+1x95+1x16 mm with the help of jointing kit as per RESPO Norms and as per direction of Supervising Engineer.

fixing of GI Wire 6 SWG as per RESPO Norms and as per direction of Supervising Engineer.

fixing of GI Wire 10 SWG as per RESPO Norms and as per direction of Supervising Engineer.

Installing of 33 KV Lighting Arestor as per RESPO Norms and as per direction of Supervising Engineer.

Installing of 33 KV Fuse Set as per RESPO Norms and as per direction of Supervising Engineer.

Installing of 33 KV Double T/F Control Pannel as per RESPO Norms and as per direction of Supervising Engineer.

Installing of MCCB for 630 KVA as per RESPO Norms and as per direction of Supervising Engineer.

Installing of 3-Phase Distribution Box as per RESPO Norms and as per direction of Supervising Engineer.

Installing of LT DT Box for 250 KVA T/F as per RESPO Norms and as per direction of Supervising Engineer.

Installing of LT DT Box for 630 KVA T/F as per RESPO Norms and as per direction of Supervising Engineer.

Febrication of Gaurding Angle per RESPO Norms and as per direction of Supervising Engineer

Providing and laying of Control Cable 2x6 sqmm per RESPO Norms and as per direction of Supervising Engineer

Providing and laying of Control Cable 2x2.5 sqmm per RESPO Norms and as per direction of Supervising Engineer

Providing and laying of Control Cable 4x2.5 sqmm per RESPO Norms and as per direction of Supervising Engineer

Digging of trench and laying of Cable under Ground and proper filling by sand and brick as per RESPO Norms and as per direction of Supervising Engineer.

Providing and Painting Aluminium Paint per RESPO Norms and as per direction of Supervising Engineer

Providing and Painting Red Oxide Paint per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Barbed wire per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Danger Board with clamp per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing F Bracket with Nut Bolt per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Stone Pad per RESPO Norms and as per direction of Supervising Engineer

Providing and fixing I Bolt RESPO Norms and as per direction of Supervising Engineer

Providing and fixing 33 KV Feeder Master Relay RESPO Norms and as per direction of Supervising Engineer

Providing and fixing 11 KV Relay RESPO Norms and as per direction of Supervising Engineer

Providing and fixing 33 KV Relay O/C RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Dead and Clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing PG Clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Holding Clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Paking peace and clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Suspension Clamp RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp for 11 KV Cable RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp for X-Arm RESPO Norms and as per direction of Supervising Engineer

Providing and fixing Clamp with Nut Bolts RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and used 11 KV Relay as RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and used 33 KV Double T/F Control Pannel as RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and usedWeasal Conductor as RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and used 33 KV Lighting Arestor as RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and used GI wire as RESPO Norms and as per direction of Supervising Engineer

Dismentaling of old and used 33 KV Fuse Set as RESPO Norms and as per direction of Supervising Engineer

arshcontractor

R S Electricals Repair and CO