GENERAL-HILLY AQUA THODUPUZHA, FRONT GATE RENOVATION-HILLY AQUA THODUPUZHA, FRONT GATE RENOVATION-General Civil Work

Amount

FRONT GATE CIVIL WORKS

OD9672/2023-2024:Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminum Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalization or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminum composite panel cladding in pan shape in metallic color of approved shades made out of 4mm thick aluminum composite panel with proper drainage of water to make it watertight including checking of all the structural and functional fitness with approved color and as per directions from consultants. Final bill will be as per measured flat area from site and rate includes all taxes

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

OD9703/2023-2024:Providing, installation and fixing 12 mm thick Toughened Glass with proper machine edge finish in angle 12 mm thick clear toughened glass edge polished and accurate designed holes to be installed by means of steel angle or spider fittings of an approved make Saint Gobain / Modiguard or equivalent. The structural Glass walls system shall be complete with proper water tight silicon sealants /gaskets. M.S Brackets to support the structure system shall be hot dipped galvanized and slots in the brackets to be pre drilled not flame cut. All anchor fasteners shall be of Hilti/Fisher make. All structural silicone shall be of exterior grade. The Rates includes all material, Labour, Wastages, Cost of scaffolding, fixing & Finishing and taxes

15.19:Dismantling steel work manually / by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per directions of Engineer -in-Charge.

OD9829/2023-2024:Providing and fixing plain CNC cut designed G.S. sheet on the existing gate as per the architectural designs and direction from the departmental officers, including a coat of approved steel primer and two coats of approved paint on including cutting to size and shape wherever required.2.00 mm thick with zinc coating not less than 275 gm/m2.

OD9831/2023-2024:Providing and fixing plain CNC cut designed G.S. sheet on the ceiling and pillar areas to provide support and strength to them as per the architectural designs and direction from the departmental officers, including a coat of approved steel primer and two coats of approved paint on including cutting to size and shape wherever required. 3.00 mm thick with zinc coating not less than 275 gm/m2.

13.63.1:Painting with aluminium paint of approved brand and manufacture to give an even shade.Two or more coats on new work

OD9881/2023-2024:Preparation of architectural drawing and 3D model-Site visits(3) and documentation of site, including photographs and site measurements. Design concept and development including detailed study. Detailed drawing in auto cad indicating dimensions and design pattern. 3D renderings of design including day and night view. Colour scheme development Note: i) Quantity should be amount in hundreds, ie. For Rs. 100000.00, quantity shall be 1000. For already prepared drawing by Pala tech pvt. ltd, C-21, Joseph Arcade(Near Maharani Theatre) Pala, Kerala 686575

Electrical Works

OD9939/2023-2024:Supply, installation and testing of 3D LED letter work for the following sizes including all connection and fixing charges as per the site conditions, i) HILLY SIZE : 35 x 16 INCH ii)LOGO SIZE: 65 x 16 INCH iii)AQUA SIZE : 65 x 16 INCH iv)KIIDC Govt. of Kerala SIZE : 70 x 5 INCH v)Bottled Drinking Water : 70 x 3.5 INCH vi)BACKGROUND SIZE : 86 x 20 INCH 2 mm astari glass acrylic for base, 3mm hexwood for led base, letter projection 2 or 2.5 inch led samsung impex plus, power supply impex or shinepro (2year warranty), Letter side beeding, aluminium channel, letters background structure gp pipe with fittings.

1.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

M/s C A Thomas & Co

Bidder Name

M/s C A Thomas & Co

AIM ASSOCIATES