Construction of Block Development Office Building at Sadar Mandi HP

Amount

Cutting in Earth work in all kind of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil, de-watering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering then disposing of all surplus excavated earth including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work ,pick jumper work , jumper blasting work , soft and hard blasting ,saturated soil , including chiseling or any other mixed variety of soil in all leads dewatering and or removal of slush and other incidentals , including stacking the excavated soil clear from the edge of excavation and than returning the stacked soil in all thickness of layers when required into plinths side of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing from work with steel plates 3.15 mm (three decimal fifteen millimeter ) thick welded with angle iron in frame 30X30X5 mm (thirty into thirty into five millimeters )so as to give a fair finish including centering , shuttering ,strutting and propping etc. with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling & removal of same for in-situ reinforced concrete and plain concrete work in .

Foundation ,footing basis of columns etc. And mass concrete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Flat surfaces, such as soffits of the suspended floors roofs , landing and the like floors etc. up to any thickness , all including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Beams cantilever girders and lintels side and soffits of beams ,beams haunchings, cantilevers ,bressumers and lintels any depth in all heights from floor including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Columns, pillars ,posts and struts square, rectangular or polygonal in plan including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Stair case with sloping or stepped soffits excluding landing including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Vertical surfaces such as wall (any thickness )partitions and the like including attached pillasters buttresses ,plinth and string courses and the like as per direction of the Engineer-in Charge including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Edges of slab and breaks in floor and walls under 20cm wide including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying, mechanically mixed and vibrated cement concrete 1:4:8 (one cement:four sand eight graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying, mechanically mixed and vibrated cement concrete 1:6:12 (one cement:Six sand Twelve graded crushed stone aggregate 40 mm (forty millimeter) nominal size) including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Demolition of stone masonary above ground level upto any floor level including stacking of serviceable material and disposal of unserviceable material as required complete in all respect in all leads & lift in all levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and laying M-25 grade of concrete with minimum cement contents of 400kg (four hundred kilogrames per cum)mechanically mixed and vibrated graded crushed stone aggregate 20mm nominal size and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-

Foundation ,footing basis of columns etc and mass concrete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Suspended Floors , roofs , landings shelves and their supports , balconies beams ,girders, bressumers and cantilever for all floors levels including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Walls any thickness (but not less than 0.10 (point ten meters thickness including attached pilasters, buttersses, plinth and string courses etc. From top of foundation up to all floor level including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Staircases ( except spiral stair case) excluding landing but including preparing of top surface and finishing of nosing for all floor including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Column , pillars , posts and structs square , rectangular or polygonal in plan including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Vertical and horizontal fins (thickness not more than 0.10) individually or forming box louvers and projected band up to floor to level including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying mechanically mixed and Vibrated cement concrete 1:2:4 (one cement :two sand:four graded crushed stone aggregate 20mm nominal size for reinforced concrete chhajas not exceeding 10cm thickness up to all floor level including finishing the exposed surface with cement mortar 1:3(one cement:three sand )to give a smooth and even surface ,form work and curing complete excluding the cost of reinforcement but including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing tor steel reinforcement of TATA or SAIL make for reinforced Cement concrete work including bending ,binding and placing in position and cost of binding wire complete for all floors including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Random rubble masonry uncoursed but brought to course with hard stone of approved quality in foundation and plinth including racking out joints in cement mortar 1:6 one cement:six sand including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Boulder filling under floors including carriage of material including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Brick work using second Class common burnt clay building bricks, in cement mortar 1:6(one cement :six sand ) in super structure upto all floor levelsincluding carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Half bricks masonry using second class common burnt clay building bricks in cement mortar 1:4(one cement :four sand )in super structure up to all floor levels including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing wood work in frames of doors ,windows ,clerestory, windows and other frames wrought ,framed and fixed in position of second class deodar wood including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing 40X3mm (forty into three millimeters )flat iron hold fast 40cm(forty centimeter) long including fixing to frame with 10mm(ten millimeter) diameter bolts & nuts and wooden plugs and embedding in cement concrete block 30X10X15cm (thirty into ten into fifteen centimeter)1:3:6(one cement :three sand :six graded stone aggregate 20mm nominal size), including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 40 mm (forty millimeter) thick flush door shutters including black enameled iron butt hinges with necessary screws of interior grade comercial type core of blackboard construction with frame of first class hardwood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 25 mm thick commercial board water proof shutters for cup board including fixing with nickle plated plano hinges with screws etc. including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Glazing with glass pan 5.5 mm (five point five millimeters)thick plain glass panes with deodar wood beading including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 40 mm (forty millimeters )thick panelled glazed or panelled and glazed shutters for doors windows and clerestory windows, including black enameled iron butt hinges with necessary screws of second class deodar wood including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 40 mm (forty millimeters)thick wire gauge shutters using galvanised M.S. Wire gauge of I.S. Gauge designation 85 (Eighty five ) G. With wire of dia 0.56mm (zero point five six milometers )for doors windows and clerestory windows including bright finished black enameled iron hinges with necessary screw of second class deodar wood including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing bright finished brass sliding door bolts with bolts and nuts screws etc including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

200x16mm( Two hundred into sixteen millimeters)

300x16mm three hundred into sixteen millimeter

Providing and fixing bright finished brass tower bolts (barrel type) with the screws etc including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

200mmX10 mm (Two hundred millimeters Into ten millimeters)

150mmX10 mm (One hundred fiftymillimeters Into ten millimeter)

Providing and fixing bright finished brass handels with the necessary screws etc including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

100 mm (hundred millimeters size)

125 mm(One hundred twenty five millimeters size )

Providing and fixing 200 mm (Two Hundred millimeters) Bright Finished hard drawn hooks eyes including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 100 mm bright finished brass floor Door stopers with rubber cushion screws etc to suit shutter thickness including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing mild steel plain grills of required pattern in wooden frames of window etc. with mild steel flat square of round bars with round headed bolts and nuts or screw etc. including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing in position collapsible steel shutter with vertical channel 20mm x10mmx2mm and braced with flat iron diagonals 20mmx5mm size with top and bottom rails of T iron 40mmx40mmx6mm with 38mm dia steel pulley complete with bolts ans nuts locking arrangement stoppers handles including applying coat of red lead paint including carriage of material with in all leads lifts in all floors including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 80 mm thick heavy duty precast cement concrete inter locking paver blocks vibro compacted M 50 grade i/c border or kurb block grey or coloured over sub base of concrete with 25 mm ( twenty five milimeters) thick average thickness of cement mortar 1:4 ( one cement : four sand) laid over and jointed with cement slurry mixed with pigment to match the shade of blocks i/c curing ,rubbing & polishing complete (sub base concrete floor to be paid for seperetly including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The contractor will have to perform the compressive test to assure M-50 grade in presence of Engineer -in -charge before use of interlocking paver.

Providing and fixing 10 mm ( ten mm) thick water proof stain and impact resistent heavy duty (double charge) vetrified tiles nitco or equivalent 600x600x10 mm thick manufactured of approved shade and colour in flooring treads of steps and landing over 12 mm (twelve milimeters) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.. The contractor will have to got the sample of tiles approved from Engineer -in -charge before use.

Providing and laying spartic cermic tiles 5.5 mm (five point five millimeter) thick of khajaria,nitco or jonson make in flooring (300x300 mm size) treads of steps laid on bed of 12 mm thick cement mortar 1: 3 ( one cement : three sand) finished with flush pointing in white cement including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and laying 18 mm thick flamed finish granite stone in flooring 20 mm (twenty millimeter average) thick base of cement mortar 1:3 (one cement :three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the granite stone as per design and pattern approved by Engineer -in -charge including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing 18 mm thick gang saw cut mirror polished premoulded and pre polished machine cut for kitcken platform ,vanity counters ,window sills facias and similar locations of requird size, approved shade colour nd texture laid over 20mm thick base cement mortar 1:4 (one cement :four sand )joints treated with white cement mixed with matching pigment epoxy touch ups, including rubbing curing moulding and polishing to edges to give high gloss finish etc including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Extra for providing opening of required shade and shape for washbasin /kitchen sink in kitchen platform vanity counters and similar locations in granite stone including necessary holes for pillar taps etc including moulding and rubbing and polishing of cur edges including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing edge moulding to 18 mm thick granite stone counters ,vanities and stair steps etc including machine polishing to edge to give high gloss finish etc including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge

Providing and fixing Galzed tiles of size 450mm x 300mm x 6mm (four hundred fifty x three hundred x six millimeter )thick in skirting risers of steps and dado on 12mm (twelve millimeter ) thick cement mortar 1:3 (one cement : three sand ) and jointed with cement slurry including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The sample and pattern of tiles should be got approved from Engineer - in - charge before fixing.

Providing and fixing 0.60 mm ( zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted screws with all accesoriees including carriage of material with in all leads lifts in all floors including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing ridges or hips 60 cm over all with 0.60 mm ( zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted screws complete with all accesoriees as required as per the directon of engineer in charge including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing VALLEY 60 cm over all with 0.60 mm ( zero point sixty milimeters) thick prepainted steel sheet in roofing with hot dipped metallic zink coated sheet with top coat of regular modified polyster ( RNP ) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing M.S BP sheet 1.66 mm to 2 mm thick in eaves board / facia / soffit / ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instructions of engineer in charge ( base members of steel work shall be measured and paid separtely including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Steel work welded in built up sections, Steel hollow sections trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Trusses and trussed purlins in building including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Grating framed guard bars ladders railling brackets and similar works including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing on wall face PVC (D-plast) rain water pipes of workng pressure not less than 4.50kg/sqm including filling the joints with approved adhesive complete 100 MM dia pipes including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing M.S holder bat clamps of approved design to C.I or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (one cement:two sand:four stone aggregated 20mm nominal size )and cost of cutting holes and making good the walls etc.100mmdiameter for C.I pipes including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing on wall face PVC (D-plast)accessories for rain water pipes including filling the joints with approved adhesive complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

PVC plain bend 100 mm diameter

PVC plain shoes 100 mm diameter

Providing and fixing false ceiling made out of Armstrong mineral fiber ceiling tiles of size 600x600x15mm of type RH -99 laid in grid system with black groovs at bottom including the cost of frame work comprising of GI-120 GSM coating with minimum 0.3mm thickness main runner spaced at 1200 mm center to center securely fixed the structural soffits by approved hangers fixed at 1200mm maximum distance including carriage of material with in all leads lifts in all floors including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The sample and pattern of false ceiling should be got approved from Engineer - in - charge before fixing.

Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead , red oxide/zinc oxide crome including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Painting two coats (excluding priming coat )on new steel and other metal surface with enamel paint other then white brushing to give an even shade including cleaning surface of all dirt dust and other foreign matter including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Applying priming coat on new wood and wood based surfaces with ready mix paint brushing wood pink primer after and including preparing he surfaces by thoroughly cleaning oil grease dirt an other foreign matter sand papering and knotting etc complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Painting two coats (excluding priming coat)on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt dust and other foreign matter send papering and stopping with enamel paint other than white including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Varnishing two coats (excluding priming coat)on new wood and wood based surfaces under coating with flatting,varnishing and finishing coat with varnish to give an even surface including cleaning the surface of all dirt ,dust and sand papering so as to produce a smooth, dry and matt surface including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Polishing two coats with french polish on new wood and wood based surface to give an even surface including cleaning the surface of dirt dust and sand papered smooth and including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

6 mm (six millimeter)thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeter) thick cement plaster in single coat on rough / fair side of brick /concrete/stone wall for interior plastering for all floors including arises internal rounded angles chafers and / or rounded angles chamfers and/ or rounded angles not exceeding 80mm (eighty millimeters )In girth and finished even and smooth in cement mortar 1:6 (one cement :six sand )including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Distempering (two coats )with oil bound washable distemper of approved brand and manufacture and required shade on un-decorated wall surfaces to give an even shade over and including a priming coat with alkali resistance primer of approved brand and manufacture after thoroughly brushing surface free from mortar dropping and other foreign matter and also including preparing the surfaces even and sand papered smooth priming coat with distemper primer including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Applying one coat of acrylic primer (spectrum or equivalent of superior quality on new concrete /masonry / plastered surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Finishing wall with weather proof exterior grade emulsion of approved design (apexultima) or its equarlied on udecorated wall surfaces (Two Coats )to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters etc. including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing under layer for plinth protection of 75mm (seventy five millimeters ) thick (unconsolidated ) bed of dry brick /stone broken/crushed aggregate 40mm (forty millimeters ) nominal size well rammed & consolidated & grouted with fine sand including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing plinth protection 50 mm (Fifty Millimeters )thick in cement concrete 1:3:6 (one cement :three sand :six graded/ crushed stone aggregate 20 mm nominal size including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Brick edging ( brick laid on edge ) to plinth protection with bricks including grouting with cement mortar 1: 4 ( one cement : four sand ) with brick size 22.90 x 11.2x7 cm including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Constructing course rubble hammer dressed U shape open surface drain with side wall 15x22cm in cement mortar 1:6 (one cement:six sand )and inside plastering with cement mortar 1:3(one cement:three sand)icluding earth work and laying 10cm cement concrete in 1:5:10(one cement:five sand:ten graded stone aggregate 40mm nomonal size and 7.5 cm cement concrete 1:2:4(one cement:two sand :four graded stone aggregate 20mm nominal size and finished with a floatingcoat of neat cement complete including carriage of material with in all leads and lifts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of WC ,kitchen and the like consisting of including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. (i) 1st course of applying cement slurry @4.40kg mixed with water proofing compound confirming to IS 2645 in recommended proportions including rounding of junctions of vertical and horizontal surfaces (ii) 2nd course of 20mm cement plaster 1:3(one cement:three sand) mixed with water proofing compound in recommended proportions including rounding of junctions of vertical and horizontal surfaces (iii) 3rd course of applying blown or residual bitumen applied hot at 1.7kg/sqm of area (iv) 4th course of 400 micron thick PVC sheet(overlaps at joints of PVC sheets shouldbe 100mm wide and pasted to each other with bitumen at 1.7kg/sqm)

Providing and fixing vitreous china wash down water closet (European type W.C. pan) of Cera ,Hindware or equvalent ) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement : one sand) seat and cover to be measured and paid for separately angle Indian universal closet including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing vitreous china wash down water closet squatting pan (Indian type W.C. pan of Cera ,Hindware or equvalent)of size 580mm (earth work bed concrete, foot rest and trap to be measured and paid for seprately a including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Orissa pattern

Providing and fixing 10.00/12.50/15.00 liters vitreous china low level flushing cisterns of Cera, Hindware or equvalent with a pair of cast iron or mild steel brackets complete with fitting such as lead valve less syphon, 15mm (fifteen millimeters) nominal size brass ball valve with polythene float, chromium plates brass handles unions and couplings for connections with inlet , outlet and over flow pipe 40mm ( forty millimeters) die chromium plates flush bend including cutting holes in walls and making good the same and connecting the flush bend with cisterns and closet (over flow) pipe tube measured and paid for separately, including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing in position brass mosquito proof couplings for over flow pipe of 25mm ( twenty five millimeters) nominal dia (over flow pipe tube measured and paid for separately ) including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing white plastic sheet (solid type) and cover for wash down closet with chromium plated brass hinges and rubber buffers of Cera, Hindware or equavalent complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing galvanished iron inlet connection for flush pipe with water closet pan including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing vitreous china wash basin of Cera ,Hindware or equvalent with single hole for pillar tab with cast iron or steel brackets painted white including cutting holes and making good the same but excluding the fitting including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Flat back 550 x 400 mm (Five hundred fifty millimeters into four hundred millimeters)

560 mm x 400 mm (oval type under counter)

Providing and fixing vitreous china pedestal for washbasin of Cera, Hindware or equvalent complete recessed at the back for reception of pipe and fitting including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. wase with C.I. of M.S. Brackets painted white including cutting holes and making same with fitting, size 610 X 510 mmwith bowl depth 200 mm including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass waste for wash basin or sink including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 32 mm dia (thirty two millimeters ) M.I. union for wash basin or sink complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 32 mm dia (thirty two millimeters ) chromium plated brass S trap for wash basin and sink including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 100 mm dia (one hundred millimeters ) sand cast iron grating of Ess-Ess ,Jaguar or equvalent for gully floor or Nahni trap complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing CP brass bib tap ( superior or heavy quality of Ess-Ess ,Jaguar or equvalent make) 15mm (fifteen millimeters ) dia with capstan head i/c CP concealing flange complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The series of bib tap should be got approved from Engineer - in - charge before installation.

Providing and fixing 15 mm dia ( fifteen millimeters) chromium plated brass pillar tap with capstan heads i/c CP concealing flange of Ess-Ess ,Jaguar or equvalent make complete in all respects including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The series of pillar tap should be got approved from Engineer - in - charge before installation.

Providing and fixing CP brass angle valve 15mm without nuts and pipe i/c CP concealing flange of Ess-ess ,Jaguar or equvalent make in all respects including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The series of angle valve should be got approved from Engineer - in - charge before installation.

Providing and fixing CP brass bib tap ( superior or heavy type) of Ess-Ess ,Jaguar or equvalent make ) 15mm (fifteen millimeters ) dia with long body i/c CP concealing flange complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The series of bib tap should be got approved from Engineer - in - charge before installation.

Providing & Fixing Mixer for Kitchen sink i/c CP concealing flange of Ess-ess ,Jaguar or equvalent make with casted swing spout at top including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The series of Mixer should be got approved from Engineer - in - charge before installation.

Providing and fixing CP stop cock of Ess-ess ,Jaguar or equvalent make i/c CP concealing flange including carriage of material with in all leads and lifts 15 mm (fifteen millimeters) nominal bore including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The series of stop cock should be got approved from Engineer - in - charge before installation.

Providing and fixing 600 mmx 450 mm ( six hundred into four hundred fifty millimeters) beveled edge mirror of superior glass mounted on 6mm (six millimeters) thick A.C sheet or plywood sheet and fixing to wooden plugs with chromium plated brass screws and washers complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing CP brass towel rail of Ess-Ess ,Jaguar or equvalent makecomplete with CP brass brackets fixed to wooden plugs with CP Brass 600mmx20mm (six hundred into twenty millimeters) complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing 600 mm x120 mm (six hundred into one twenty millimeters) glass self with CP brass brackets and guard rail complete fixed to wooden plug with CP brass screws including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing toilet papers holders chromium plated brass including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing PTMT Zet sprayer with 1.5 mtr tube including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing PVC connection with brass union 300/450mm length including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeters) size.

Providing and fixing PTMT soap dish with holder of approved quality and colour with steel screw and rawal plug complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing brass Full way valve with wheel including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeters)nominal bore

20 mm (twenty millimeters)nominal bore

Providing and fixing to wall ceiling and floor gal vanished mild steel tubes (medium grade) tube fitting and clamps including making good the wall and ceiling and floor including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeters) nominal bore

20 mm (twenty millimeters)nominal bore

Providing and laying 20 mm (twenty millimeters) nominal bore in trenches gal vanished mild steel tube of TATA Or Jindel or Equvalent (medium grade) tube fitting earth work in trenches tube measured and paid for separately including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing G.I/M.I union of following nominal size including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

15 mm (fifteen millimeters) size.

25 mm (twenty Five millimeters) size

Making connection of gal vanished steel distribution branch with gal vanished mild steel main 20 mm to 40 mm (twenty millimeters to forty millimeters) nominal bore by providing and fixing tee including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing PVC water storage tank of Sintex, D-plast or equvalent make of ISI :12701 Marked ,G.I. inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground Level (1000 litres net capacity tank) including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge. The PVC water storage tank should be got approved from Engineer - in - charge before installation.

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive ,cost of cutting and making good the wall and floors etc. complete 110 MM X 75 MM including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes of D-plast make ISI marked Including fixing with approved adhesive etc. including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

7 5mm nominal size (seventy five millimeters) size

110 mm nominal size (one hundred ten millimeters) size

150 mm nominal size (one hundred fifty millimeters)size

Providing and fixing PVC single equal branch with ovel access door of D-plast make , ISI marked insertion rubber washer 3 MM thick bolts and nuts including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

110 MM (one hundred ten millimeter Dia )

75 MM (Seventy five millimeters Dia )

providing and fixing PVC door band with oval access door insertion rubber washer 3 MM thick bolts and nuts of D-plast make ISI marked including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

110 MM (one hundred ten millimeter Dia )

75 MM (Seventy five millimeters Dia )

Providing and fixing PVC collars of D-plast make ISI marked including fixing with approved adhesive etc. including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Providing and fixing PVC Plain bend of D-plast make ISI marked including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

75 MM (Seventy five millimeters Dia )

110 MM (one hundred ten millimeter Dia )

Constructing brick masonary chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement: five sand) C.I cover with frame( light duty) 355x610mm internal dimension total weight with cover and frame to be not less than 38kg (weight of cover 23kg and weight of frame 15kg ) RCC top slab with 1:2:4 mix (one cement: two sand: four graded stone aggregate 20mm nominal size), foundation concrete 1:5:10 (one cement : five sand: the graded stone aggregate 40mm nominal size ) and inside plaster 15mm thick with cement mortar 1:3 (one cement: three sand) finished with a floating coat of neat cement on walls and bed concrete etc. and curing complete. including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Inside dimensions 455mm x 610mm x 450mm deep for single pipe line

Inside dimensions 600mm x850mm x450mm deep for pipe line with three or more inlets

Providing and fixing white vitrous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x430x265mm sizes respectively with automatic flushing cistern of Cera, Hindware or equvalent with fittings R.S. or C.I. brackets standered size galvanised steel flush pipe and spreaders galvanised steel flush pipe and spreaders with brass unions and G.I clamp complete including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

One urinal basin with 5 litre automatic flushing cistern .

Range of 2 urinal basin with 10 liters automatic flushing cisten

Providing and fixing vitreous china division plate for urinals 600 x 300 mm including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying cement concrete flooring 1:2:4 one cement:two sand:four crushed stone aggregate 20mm nominal size laid in one layer finished with a floating coat of a neat cement including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying brick bats 50 mm size including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying C.I manhole cover 50cm dia including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Providing and laying 200 mm cast iron rings with chequred or ribited non soli surface including and fixing in main holes with 200x200x200mm cement concrete 1:3:6 stone of 20mm nominal size including carriage as required complete in all respect in all leads & lift in all floor levels and other incidentals as per direction and to the entire satisfaction of Engineer-in-Charge.

Bharat Kapoor