Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC FLAT NO 20 AMBEDKAR ROAD DEHU ROAD PUNE 412101 D 101 CESC INDEX NO D 101 HQ CESC PUNE | NA | NA | 412101 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹36.8 L+₹4.9 L (15.5%)Rejected-Finance S NO 279 1 1A PLOT NO 113 KUTWAL COLONY SASTHE WASTI LOHEGAON PUNE 411 047 | PUNE | MAHARASHTRA | 411047 | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹40.6 L+₹8.8 L (27.5%)Rejected-Finance | L3 | Rejected-Finance Not lowest |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
23 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Dehu road
GE Dehu road Pune
SPL REPAIR TO GOVT MD ACCN AT SHIVAJI ENCLAVE BLOCK NO P805 AND CONSTRUCTION OF 02 TOILET BLOCK NEAR BLDG NO T08 AND T20 OF ORDNANCE DEPOT TALEGAON UNDER AGE BR WEST AT GE DEHU ROAD
2023_MES_618752_1
8801
Open Tender
Civil Works
Item Rate
270 days
GE Dehu road
as per tender document
7 documents required · 7 mandatory
₹500
GE Dehu road
₹99,800
Yes
26 May 2024
14 Sept 2023
25 Oct 2023
14 Sept 2023
23 Oct 2023
28 Sept 2023
Amount
Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed and cleaning the plastered / concrete surfaces with wire brushes and applying water proofing treatment as under :- (a) 15 mm thick cement plaster in 1:4 on concrete surfaces finished even & smooth without using extra cement complete. (b) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (c) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (d) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (e) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane all as specified and directed by Engineer-in-Charge. (f) The make / treatment shall be from the one of the following manufacturer :- (i) 'Moply FP' of M/s Texsa (I) Pvt Ltd. (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydroflame' of M/s Hydrotech Ltd.
M&L for water proofing treatment using polymerised membranne to roof slab including 10 mm thick plaster in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound by 3% by weight of cement or as per manufacture instruction (a) Apply one coat of oil bituminous primer @ 0.20 kg/Sqm over concrete surface. (b) Laying APP Polimerised modfied membrane not less than 3 mm thick and weighing not less than 3.5 kg per Sqm by torch applicaton method. (c) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction. (d) Finally applying a coat of solar reflective bituminious aluminium paint @ 0.15 Kg/Sqm over the membrane. (e) The make / treatment shall be from the one of the following manufacturer:- (i) 'Moply FP' of M/s Texsa (I) Pvt Ltd. (ii) 'Hyperplast' pf IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product. (iv) 'Hydroflame' of M/s Hydrotech Ltd.
Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting, sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed.
Taking out existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.
M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
M & L for 15 mm bore GI pipe concealed, medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
S&F 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
S&F 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
M & L for 20 mm bore GI pipe concealed,medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
S&F 25 mm bore GI pipe medium grade with all fittings and fixtures complete all as specified and as directed.
S&F stop Valve, screwed both end for iron pipe or for unions and fixed, 25 mm fancy type.
S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms ) complete all as specified and as directed.
S & F in repairs 15 mm dia stop valves concelaed type cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.
S&F in repairs 15 mm dia bib taps chromium plated fancy type, screwed down, screwed for iron pipe or for brass furrule and fixed for 15mm dia pipe complete all as specified and as directed.
S & F in repairs 15 mm dia Brass cromium plated shower rose of 125 mm long leg complete all as specified and as directed.
S&F in repairsGrating round 100 mm size of PTMT (Minimum weight 25gms.) complete all as specified and as directed.
S& F in repairs stainless steel Sinks 1 mm thick for kitchen or laboratory with plugs, washers and wastes; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and as directed.
S & F in repairs for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and as directed.
S&F as in repairs PVC low level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full both sides alongwith PVC flush pipe 32mm dia jointed to WC and handle incl brackets all as directed.
S&F in repair plate rack made of stainless steel 0.63 mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified and directed.Make Nirali/Silver shine/Jindal
S&F vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistern & flush pipe fixed in repairs complete all as specified and as directed. .
Dismantling / taking down AC waste/vent pipes fixed to walls with all fittings/ accessories 100 mm dia pipes all as specified and directed by Engineer-in-Charge.
S&F, PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 110 mm dia complete all as specified and directed by Engineer-in-Charge.
S&F, PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls, or laid in trenches bore of pipe 75 mm dia complete all as specified and directed by Engineer-in-Charge.
S&F,110 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge.
S&F,75 mm dia PVC (SWR) bends, any radius with access door complete all as specified and directed by Engineer-in-Charge.
S&F, 110 mm dia PVC (SWR) vent cowl complete all as specified and directed by Engineer-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), all as speicfied and directed.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match. Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete.
M&L for non-skid coloured tiles 7 to 8mm thick (square/rectangular) polished area of each tile 0.36 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm th screed bed in CM 1:6 complete all as specified and as directed.
Ditto as per item above but on skirting over 10 mm th rendering in CM 1:4 complete all as specified and as directed.
M & L Glazed ceramic tiles in vertical surface 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles incl backing coat 10mm thick in CM 1:4 all as direced.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.
M&L prepolished machine cut Kota stone 20 to 25mm thick in tread of steps, landing or floor set and jointed in neat cement slurry and pointed in coloured cement to match complete over and including 15 mm thick screed bed or bedding layer of cement 1:6 including front nose moulding & two groove along the length of treads complete all as specified and as directed by Engineer-in-Charge
All as per Item above but in riser of steps, dado or skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match including backing coat 10 mm thick in CM 1:4 complete all as specified and as directed.
M&L for Marble work green marble 18 to 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with green marble shade complete all as specified.
M&L for providing edge to moulding to 18-20mm thick marble stone any description including machine polishing to edge to give high gloss finish ect complete all as specified and as directed by Engineer-in-Charge
M&L machine cut cuddapah stone slab flooring 20-25mm thick over and including cement screed based 20 mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting polishing and rubbing complete all as specified and as directed.
Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.
M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.
M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.
M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment over 25 mm thick sand cushion complete all as specified and as directed.
Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each.
–Ditto- as item above but n.exc. 1.50 sqm each
Taking down shutters of any description exc. 1 sqm and not exc. 2 sqm each
Taking down steel window / ventilator of any size
Cutting holes in brick walls exc half brick but n exc one brick, built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required -depth of embedded portion of holdfast or lugsmeasured from the face of jamb into the wall - exc. halfbrick but n exc. one brick.
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 125 X 60mm
S&F for pressed steel door frames with one or more rebates incl necessary fixing lugs, hinges, lock strike plates of size 105 X 60mm
M&L for PCC 1:2:4 type B1 in door frame filling all as specified and directed.
S&F factory made 35 mm thick plain framed paneled shutter (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood.
S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.23 (a) and fitted to chowkhats complete all as specified.
S&F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F aluminium powder coated window sliding type (3 track) with frame size100x35x1.2mm and shutter 39.40x17.70x1.2mm with two glass shutter & one mesh shutter incl necessary jointing cleats cleats, glazing clips, rubber packing,and locking arrangement powder coated aluminium snap beading screws with 4mm plain float glass & 0.56 mm dia SS wire mesh, fittings etc complete all as specified.
S&F aluminium decogrill 10mm thick with necessary channels,frame and clips, complete all as specified and as directed. Make- Decogrill DG104.
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
S&F aluminum powder coated ventilator with three shutter - one glazed shutter fixed in half bottom and two upper shutter one glazed outside openable and other wire guaged inside openable shutter with frame with or without sash bars of aluminum section weighing 0.55 Kg per Sqm including necessary joining clits , glazing clips, rubber packing, alu. Snap beading , screws, aluminum fittings, suitable handles complete .
S&F in repairs curtain rod stainless steel heavy grade 25 mm dia fancy type complete with side knobs all as specified and directed.
S&F in repairs stainless steel brackets fancy type for 25 mm dia curtain rod complete all as directed.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
Supply and fixing 30 mm thick Fiberglass ReinforcedPlastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick S&F FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge.
S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00mm complete all as specified and directed.
S & F 150 mm size extruded aluminium alloy handles,fabricated type anodised.
S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm
S & F aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 100mm
S&F butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed by Engineer-in-Charge.
S& F 100 mm But hinges, stainless steel, bright polished and fixed, type B-11 all as specified and directed
S & F aluminium alloy , anodised , sliding door bolt with hasp , staple ( bolt type ) & fixing clips of sheet, cast or extruded section & fixing bolts & sliding bolts of extruded section or cast aluminium alloy & fixed - length of bolt 250 mm
S&F in repairs floor door stopper with overall length of cover plate is 150 mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.
Dismantling of boarding, any description and fixed in any position with nails complete all as specified and directed.
Dismantling timber fillets under 40 Sq.cm in section unframed work , in any position complete all as specified and directed.
S & F in repairs pre-laminated particle board 25mm thick exterior grade prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl 6mm thick teak wood lipping patti complete.
S & F of 2nd class hard wood plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails sectional area exc 13 & not exc 25 sqcm complete all as specified and directed.
S&F in repairs continuous Piano type hinges mild steel bright finish or electrogalvanised (width of flap 40 mm when open) complete.
S & F of 100 mm size brass hasp and staple safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.
M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and as directed.
M & L for Rendering 05 mm thick cement plaster on concrete surface of ceiling in cement mortor 1:3 shall be even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering cement plaster 20 mm thick (15+5)mm in two layer in CM 1:4 on fair faces of brick work or conrete wall surfaces finishing the surfaces even face with sponge finish complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of alkali resistant primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of alkali resistant primer on plastered surfaces complete all as specified and as directed.
M&L for preparation and applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surfaces n exc 10cm width or girth complete all as specified
M&L for complete removal of existing treatment from old decorated surfaces of wall, preperation of surface and applying two coats of distemper oil emulsion over and including a coat of alkali resistant primer complete all as specified and directed by Engineer - in - Charge.
M&L for Complete removal of existing treatment from old decorated surfaces of walls, preperation of surface and applying two coats of cement base paint over and including a coat of alkali resistant primer complete all as specified and directed by Engineer - in - Charge.
M&L applying one coat of white wash on old decorated surfaces of ceiling including preparation of surfaces complete all as specified & directed by Engineer-in-Charge.
M&L preparation of old painted wooden surfaces of any description exceeding 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified & directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced) in Suken portion exe 15 cm thickness (below or aboveground level) complete all as specified and directed.
M & L cement conrete 1:7:12 type F2 (uisng 40mm graded aggregate) as in sunkun filling complete all as specified and directed.
M&L for Providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including 15 mm thick cement plaster in CM 1:4 all tools and plants as per manufacturer's specification paint complete all as specified and directed.
Supply only Liquid water proofing compound .
Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation .etc in hard/dense soil.
Returning,filling in including spreading ,leveling ,watering and well ramming in layers not exc 25cm with excaveted soil as directed.
Removing excavated material/soil n .exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point.
M&L moorum filling in floors/pavings, laid in layers not exceeding 15cm thick, spread levelled and rammed/rolled including watering to reqd level and gradient all as specified.
M&L for Cement concrete, (1:4:8) type D2 (using 40mm graded aggregate)as in foundations/filling mass concrete complete all as specified and directed
M&L for Brick work with subclass 'B' brick straight or curved on plan 6m mean radious built in CM (1:6) etc as directed .
M & L for providing reinforced cement concrete M-20 B1, 1:2:4, using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like complete all as specified and directed.
M & L for providing reinforced cement concrete M-20 B1, 1:2:4, using 20 mm graded stone aggregate as in columns, pillars, piers, posts and struts and the like complete all as specified and directed.
M & L for providing reinforced cement concrete M-20 B1, 1:2:4 using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
M & L for providing reinforced cement concrete M-20 B1, 1:2:4 using 20 mm graded stone aggregate as in slabs complete all as specified and directed.
M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per Item above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M & L for use and waste of form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete complete all as specified and directed.
Formwork to sides of Square, rectangular on plan or polygnal pillars, posts, struts, piers, columns and stanchion rough finished flat surface of concrete complete all as specified and directed.
Formwork for rough finished surface to sides and soffits of beam, bressummers,lintels, cantilevers and supports etc all as specified and directed.
M & L for use and waste of form work rough finished surface of concrete flat to soffits of suspended slabs such as roof slabs, floor slabs,Roof beam, landings and similar work not exc. 200 mm thick horizontal or slopping in rough finished surface of concrete complete all as specified and directed.
M&L for Use & waste of formworkfor rough finished surface to edges of concrete flats, breaks in floors, window cills, concrete railings etc and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed
M&L for rendering 15 mm thick on other than fair faces of brick masonry work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement all as specified and directed.
S&F 15 mm dia pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe complete all as specified and as directed.
S&F vitreous china wash hand basin, white flat, size 550x400mm incl brackets waste coupling and waste pipe all as specified and directed by Engineer-in-Charge
S&F Soap dish, any type, fixed to plugs with chromium plated brass screw
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
Supply & Fixing PVC door frame (50x47) mm made out of plain colour 5 mm thich PVC Sheet re in forced with MS Square Tube, supplying & fixing in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick ( Style ) consisting of frame made out of MS Tubes for top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ' C 'Channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC Sheets for top rail , lock rail & bottomrail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC Sheet to be fitted in the MS Frame welded / sealed to stiles & rails with suitable PVC Sheet beading, jointed together with solvent cement,supplying & fixing in the frame at site as per specification & drawing.
S&F Sheet glass 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer-in-Charge.
M&L for reinforced cement concrete pipes class NP-2 , laid in trenches & jointed complete with collars, dia of pipe 150 mm complete all as specified and directed by Engineer-in-Charge.
M&L for concrete bed to drain pipe in cm 1:4:8 type D2, 150 mm dia including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and directed
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard dense soil all as specified.
M & L for 75 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.
M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.
M&L for soakage wells including excavation and earth work in any type of soil, PCC (1:3:6) type C-2 (using 40mm graded stone aggregate), brick wall with honey combed masonry with top ring of M-25 concrete including intercepting chamber and screen chamber made of brick masonary in CM (1:4), RCC cover slab in M-25/SFRC cover interconnecting pipe of RCC/DWC complete filled with brick bats of size 1.2 m dia x 1.5m effective depth for 10 user
M&L for RCC hume pipe septic tank for 10 user's designed to carry sewage and sludge water , including excavation and earth work in any type of soil, PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, vent shaft connection etc all as specified and directed by Engr-in-Charge
Taking down carefully copper/aluminium point wiring (light, fan, socket or ower) complete,(fittings such as switches, ceiling roses,pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc.
Taking down unserviceable submain wiring alongwith batten/PVC/steel conduits etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified
Taking down unserviceable main switches ,DBs alongwith teak wood boards etc and making good disturbed surfaces of walls/ floors to match the existing surfaces all as specified
M&L for point wiring complete including single core PVC insulated and unsheathed type flexible bright unsheathed multi stranded 1.5sqmm copper conductor FRLS PVC casing caping and surface/concealed PVC Conduit & accessories having ISI mark to be fixed with proper screws/ (MS steel strips if required ) including all accessories/ fittings/ junction boxes /inspection covers etc including hard PVC board of required size fixed with wall surface by means of brass screws and sunk/cupwashers, for mounting of switches fan regulators etc including 1.5 sqmm (22/0.30mm) 1100 V grade PVC insulated, unsheathed flexible muliti stranded copper conductor FRLS cable as continuous earthwire connected to metallic bodies of luminaries/fans etc. at one end and to common earth duly at other end for.
a) One light point controlled by one one way switch
b) One light point controlled by one two way switch
c) One Fan/Exhaust fan point controlled by one switch
d) One switch socket 5 pin 5 Amps flush type on same board.
e) One switch socket 5 pin 5 Amps flush type on Independent board.
f) One bell/ buzzer point controlled by one push button on the same board with other switches or independent
- do - all as per item No 04 above but with 2.5 sqmm (36/0.3mm) FR cable for one socket 5 pin 15Amps flush type on independent board with including earthwire complete.
S & F Switch piano flush type single pole one way 230V 6Amps
S & F Switch piano flush type single pole two way 230V 6Amps
S & F Socket outlet 2 in 1 , 3 pin 5 Amps flush type 230V S.P. multipurpose type
S & F Switch socket combination flush type multi purpose 5A/16A, 5 in 1controlled by one switch 230V.
S & F ceiling rose surface PVC 50 mm dia three terminals including PVC mounting block, white/lvoury /Urea finish.
M&L in repair for stepped type electronic fan regulator flush type on the existin phenolic laminated sheet etc as required for ceiling fan 230 volt AC supply, 50HZ 1200/1400 mm sweep
S & F Bell push, flush type, 5 amp, 230V
S & F Bell ding dong type 230V
M&L submain wiring with 2 single core PVC insulated multistranded flexible copper conductor 1100Volts grade (FRLS) cables 4.sqmm and 1 run 4 Sq mm PVC insulated multistrand cu conductor cable (FRLS) of green colour for continious earthing drawn through PVC surface/concealed PVC conduit of suitable size and with all accessories all as directed and specified by Engr-In-charge.( Note: Two runs of 4 sqmm, one run of 4 sqmm copper conductor and one run of surface/concealed PVC conduit of suitable size and with all necessary fixing accessories and making good disturbed surface area shall be measured as one length.)
M & L for earthing complete with galvanised steel earth plate electrode 60cm ×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel,earth wire protected by GI pipe 15 mm dia 'light grade' including charcoal dust, common salt, excavation & earth work, PCC Pit with 1:3:6 type C-1, 40 mm thick RCC cover in 1:2:4 type B-1 reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handles 12 mm dia, PGI funnel & GI watering pipe 'light grade' 20 mm bore all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
M & L MCB DB SPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 230 Volts with 200 Amps rated bus bar 4 way
M & L MCB DB SPN sheet metal double door enclosure mounted on teak wood board of suitable size for mounting MCB 230 Volts with 200 Amps rated bus bar 8 way
S & F MCB SPN 5-32 amps, 240Volts 10KA
S & F MCB SPN 10-40 amps, 240Volts 10KA
S & F MCB SP 5-40 amps, 240Volts 10KA
S&F LED lights fitting 1x20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
S&F in replacement of 2 feet 10 W linear aluminium LED Batten with white acrylic cover complete with all accessories prewired and connecting up twin core twisted flexible copper conductor cable with suitable size.
Taking down ceiling fan 1200/1400 mm sweep / exhaust fans including disconnection of electric connection and removing the blades in safe for reinstalling
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)
Supply and fix in repair LT indoor panel board made up of 2 mm thick MS Sheet duly powder coated with closing and locking arrangement as per suitable size fixing on wall with wooden plank of 18 mm thick inside panel including taking down and refixing existing electronic energy meter with replacemnt of following new items :-
a) MCB DB TPN 4 way double door -01 No
b) Isolator 4 pole 100A -01 No (Incoming)
c) Isolator DP 40A - 05 No ( Out going)
Supply and fixing LED street/Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complet
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louver including capacitor complete all as specified and directed by Engineer-in-charge( including making hole on exixting wall and making good surface of wall with necessary PCC Work and plaster etc.) . Make :-Model : Ventil Air-DB 300 mm of Havells and equavalant of GEC/Bajaj/ CG/ Khaitan/ Usha
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 380m sweep with, blades, and frame and louver including capacitor complete all as specified and directed by Engineer-in-charge( including making hole on exixting wall and making good surface of wall with necessary PCC Work and plaster etc.) . Make :-Model : Ventil Air-DB 380 mm of Havells and equavalant of GEC/Bajaj/ CG/ Khaitan/ Usha
Dismantling /disconnecting LT cables of any size with accessories. Old unserviceable of any type broken or damaged cables fitting on poles / laid in trenches and keeping aside for further disposal.
Supply & Laying cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with strandad aluminum conducter of 25 sq. mm X 4 core :- Make :- Havells/ Polycab/ Gloster
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core Make polycab,cci Gloster Hpl
M & L for DWC HDPE Pipe 50 mm outer dia for UG cable protection passing of cables on wall or floors with shaddling and under ground and all as specified and directed by Engineer-in-Charge.
PREETI ENTERPRISES
shree ram enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .