SPL REPAIR TO ROAD FROM R AND D GATE NO 03 TO GATE NEAR KSP OF ASC SUP TYPE C UNDER GE ROORKEE

Amount

M&L for Repair to potholes of depth exc 30cm not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth and making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed, macadam, binder & chippings) complete all as specified and directed.

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all as specified and as directed.

M&L for Applying evenly a priming/tack coat with bitumious primer of paving bitumen content (VG-10) @ 5 Kg per 10 Sqm of cleaned dry surface by a self propelled or bitumen pressure sprayer equipped for spraying the tack coat uniformly complete all as specified and as directed.

M&L for Bituminous premixed semi dense asphaltic concrete 30 mm thick (consolidated thickness) with 5.5% binder content ( VG-30) by weight of total mix, rolled with power roller exc 8 tonne & n.exc 12 tonne and compacted to required camber and gradient complete all as specified and as directed.

M&L for thermoplastic reflective paint as in road marking 2 mm thick single coat as in centre line, edge line, etc road marking of 100/150 mm width using HOT MARK thermoplastic paint ( Hot application) white by indigeneous modern propelled raod marking machine as directed including all ingredients such as binder glass beads Titanium-diaoxide calcium carbonate lintar fillers thermoplastic requirement for glass beads shall be as per the table No. 800-4 specification including spraying of glass beads instrucions complete all as specified and as directed.

Supply and Fixing Solar cat Stud, Exterior Aluminium, Interior; Bullet proof PC, Weight : 950 Gm Approx , Power Supply: Mono Crystalline Solar Cell (5V 60MA), Power Storage Device: Lithium iron battery (3.3V 500 MAH), Lighting Mode: Flash or Steady lighting, LED No : Single side 3 pcs , double side 6 pcs , Dispaly Colour: Red, Visual Distance: 1000m approx , Working Tempreture: -10 Degree Celcius~ 70 Degree Celcius,Starting Intensity : 300 Lux~ 600 Lux , Size 125x60 complete all as specified and as directed.Model No : DA 111.

S&F in repair cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplens reflector of model No DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. (Green/Yellow/Red colour) complete all as specified and as directed.

Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PAMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height above graund and 200mm below ground duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and as directed.

VERMA CONSTRUCTION CO (BID ID -3152356)

M/s Himanshu Tyagi (BID ID -3158625)

Nanda Brothers (BID ID -3151474)