ADDN/ALTN AND SPECIAL REPAIRS TO TYPE-A AND TYPE-B MD ACCN AT CSD DEPOT UNDER GE MISAMARI

Amount

Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings incl ridge, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based corrugated steel sheetng 0.50mm thick of an colour having tensile strengthof 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S & F of pre-painted colour galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mm for false ceiling incl 4 mm dia. G.I. suspender (upto 1200mm length) adjusting level fixed to roof slabs, complete all as specified and as directed.

M&L for 4m thick Non Asbestos designed fibre cement building boards fixed or laid/inserted to timber/GI/ Aluminium framework with screw in ceiling flat or sloping, complete all as specified and as directed.

Dismantling of timber scantling 40 Sqcm and over in section, in any position as in unframed or framed work, complete all as specified and directed.

M&L 2nd class hard wood in scantling, clean sawn, timber fixed with nails, complete all as specified and directed.

Dismantling boarding any description fixed in any position with nails, complete all as specified and directed.

S&F 2nd class hard wood for Boarding, supplied & fixed with nails in any situation 20 mm thick, complete all as specified and as directed.

M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following courses of treatment/specification from bottom to top incl taking down existing treatment:- (i) Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying as in roof Slab including preparation of surface to receive screed bed. (ii) Applying one coat of cold bituminous primer in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces. (iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 160 gms/Sqm) shall be less applied over bituminous primer as specified above over a Application of polymeric membrance shall by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction and sealing the joints with application of cold bitumen. (iv) Applying Two coat of aluminum paint over the APP membrance .

Taking up or down 15mm dia GI tubing, complete all as specified and directed.

Taking up or down 20 mm dia GI tubing, complete all as specified and directed.

S&F GI tubing 15mm dia medium grade with all fittings, complete all as specified and directed.

S&F GI tubing 20mm dia medium grade with all fittings, complete all as specified and directed.

S&F in repair 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed. .

S&F in repairs, CP bib tap 15 mm bore, fancy type, screwed down, high pressure, screwed for iron pipe, complete all as specified and as directed.

S&F 15mm bore stop valve/Angular stop cock cast fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F 20mm dia brass CP tubular towel rail D type 60 cm long fixed with bracket, complete all as specified and directed.

S&F in repair over Head Shower 150 mm dia , single flow suitable for fixing to 15mm bore (dia) GI Pipe including CP shower arm 15 dia, complete all as specified and directed.

S&F CP Brass Wall mixer 3 in 1 Chromium plated for mixing hot and cold water screwed down for iron pipe and fixed with connections with and including L bend for shower provision, complete all as specified and directed.

S&F in repair for Grating doom 100mm dia of PTMT (minimum weight 25gms) , complete all as specified and directed.

S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete as directed.

S&F in repair for Rotational moulded polyethylene water storage tanks tripple layer (white) 500 ltrs capacity (cylindrical vertical with closed top) including wash out GI pipe 32mm of 450mm length with stopper , complete all as specified and as directed.

S&Fixed in repairs sheet glass shelf assembly consisting of 5.5mm thicksheet glassshelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed..

S&F in repair kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mm, complete all as specified and directed.

S&F for kitchen plate rack made of stainless steel sheet not less than 0.63mm thick of over all size 775x750x250mm, complete all as specified and as directed.

S&F in repair PVC valve less, flushing cistern of capacity 10 litres, low level, white, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75 mm dia single socketed in any length with rubber ring joints fixed to walls/ floor complete including clamps for securing pipe complete all as specified and directed.

S&F in repair PVC (SWR) 110mm dia in junction single, (Single T) equal or unequal, complete all as specified and directed.

S&F in repairs PVC (SWR) bend of any radius 110mm bore ,complete all as specified and as directed.

S&F in repairs PVC (SWR) bend of any radius 75 mm bore , complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) Vent Cowl, complete all as specified and as directed.

S&F for 20mm dia Ball cock valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms ), complete all as specified and directed.

S&F Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed

S& F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, including brass CP waste coupling 32mm dia, PVC flexible waste pipe and PVC connection 15mm size 600mm length with PTMT nuts, complete all as specified and as directed.

S&F in repair for PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

M&L Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm white with PVC ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC , and finishing the top surfaces to match with the existing flooring as in repairs, complete all as specified and as directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and directed.

Taking down chowkhats or frame with shutter without taking off shutter from the frame not exc 1.50 sqm & removing from site complete all as specified and directed.

S&F 105mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, holdfasts etc, complete all as specified and as directed.

S&F powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including jointing cleats for fixing etc, complet all as specified and directed.

S&F powder coated aluminium anodised window/ventilator shutter side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised powder coated aluminium snap beading screws,75 mm long alm butt hinges-03 Nos on each shutter, hold fast, complete all as specified and as directed. Note :- (i) Fixing of shutter with all powder coated fittings shall be as per manufactures instruction. (ii) Rate quoted is deemed to be inclusive of aluminium hardware as indicated, glazing clips, rubber packing, hinges, anodised aluminium snap on beading for fixing glass panes in frame, handles, locking arrangement but gla ss panes in frame shall be measured and paid separately under respective Sch items separately at supply only rates.

S&F factory made Flush shutters, solid core construction 30mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983, complete all as specified and directed.

S&F 30 mm thick 2nd class hard wood glazed and skelton shutter open nrebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.2 (a), complete all as specified & directed

S&F factory made Flush shutters, solid core construction 25mm thick with block board core and plywood face panels, commercial type on both sides conforming to IS-2202(Part-I), 1983, complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes all around . M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F 100mm size butt hinges cold rolled mild steel medium weight, ISI marked, complete all as specified and directed.

S&F 150 mm size Aluminium anodised handles cast type,ISI marked, complete all as specified and directed.

S&F for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section, complete all as specified and as directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and as directed.

S&F for stainless steel wire mess 0.36mm nominal dia of wire and average width of appearature 1.4mm fixed with tinned tack or galvanised wire staples complete all as specified and directed.

S&F for sheet glass, tinted, 4mm thick, glazing in aluminium frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

S&F for frosted glass, 4mm thick, glazing in aluminium frames, area not exc. 0.50 sqm in each pane, complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.

M&L for 75mm thick PCC (1:3:6) type C-2 (using 40mm gradedstone aggregate) as in plinth protection incl finishing even & smooth without using extra cement inclusding joint filling with bitumen complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in floor/hardstanding finishing cement concrete surface even and smooth w/o using extra cement complete all as specified and directed.

S&F for chequered cement concrete tiles 200 x 200 x 25mm thick, with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors over 20 mm thick cement screed bed in CM 1:6.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises Note : All internal door will be remove before fixing of tile and will be refixing after completion to tiling work. (Taking down and refix item will be paid separately)

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4, complete all as specified and as directed.

M&L for Glazed ceramic colour tiles of size 450x350x 7m / 350 x 250 7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed.

All as per Item No.65 above but, 600mm x 150mm as in skirting etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4, complete all as specified and directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed.

Demolition of stone slabs tiles of any description or thickness in floors aprons laid bedded and pointed in any morter etc, complete all as specified and directed.

M&L Marble of green shade other than white and black, 18 to 20mm thick (table rubbed and polished) in steps, bathroom self, corner (including necessary cutting chasing) jambs,pillars, window cills, cocking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed

Machine cut kota stone flooring 20-25 mm thick over 20 mm thick cement screed 1:6 base laid and jointed with gey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.

Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado over 15 mm thick screed bed 1:6 cement morter jointed with grey cement slurry mixed with pigment to match the shade incuding nubbing, complete all as specified and directed.

M&L for sunken floor treatment as in following precedence:- (i) Provide 40mm thick PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate as in sub base and provide 50mm dia GI pipe med gde as in (spout) of 600mm long as in sunken portion. (ii) The treatment of existing sunken floor is to be dismantled upto full depth of Sunken RCC Slab and the surfaces both vertical and horizontal shall be cleaned by removing all loose mortar, dirt, dust etc. by chisel, hammer, wire brush/Jute Brush and Air Blower machine than apply two coats of elastomeric compound viz back bond WPC-30 over one coat on neat primer i.e. Super latex be applied on clean surface. (iii) Then rendering 15mm thick in CM 1:3 using liquid water proofing compound @ rate 200 ml per 50 Kg bag of cement on horizontal and vertical surfaces of sunken portion. Note: Water proofing compound shall be measured and paid separately. (iv) The bottom layer upto 200mm filled with loose filling aggregate of size 20mm and then fill the remaining sunken portion with PCC 1:3:6 type C2 40mm graded aggregates including fixing sanitary items requiring embedding in cement concrete. (v) The sunken floor tested for leakage/seepage by ponding it with water for minimum 48 hrs. To ensure that there shall not be any seepage/dampness in the slab as seen underneath and side.

Supply only liquid water proofing compound

M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins arches pillars etc, complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position and rubbish off the premises complete all as directed

M&L for Pre-cast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in landing, cover slabs (for manhole covers, drains etc) set in CM 1:6, complete all as specified and directed.

M&L TMT Bars 10 mm dia & over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips, complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key scrubbing down with water etc including removal of rubbish material from site, complete all as specified and directed..

M&L for rendering 20mm thick plaster in two layer in CM 1:4 mixed with water proofing compound on fair faces of brick work or concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for 15 mm thick plaster in cm (1:6) on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick plaster in cm (1:3) on fair faces of concrete surfaces of ceiling including finishing even & smooth without using extra cement , complete all as specified and directed.

M&L White wash, three coats on new ceiling surfaces including necessary preparation of surfaces complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying one coat of white wash, complete all as specified and directed.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaceProviding and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. complete all as specified and directed.

M&L for Complete removal of old surface and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaceProviding and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. complete all as specified and directed.

M&L for applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of primer and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work, complete all as specified and directed.

M&L for Complete removal of old surface and Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth and applying one coat of primer and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work, complete all as specified and directed.

M&L Preparation of new wood and wooden based surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over coat of pink primer, complete all as specified and directed.

M&L Preparation of old wood and wooden based surfaces of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces steel surface and apply two coat of synthetic enamel paint over a coat of red oxide primer , complete all as specified and directed.

M&L for 18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on both face, complete all as specified and directed.

S&F magnetic PVC catcher for kitchen cup board, complete all as specified and directed.

S&F 100mm long Aluminium handles, cast type, anodised, complete all as specified and directed..

S&F for framed work such as grills, gratings etc with ends of bars shouldered and.or riveted or forged into spikes, framed gurad bars, barred iron doors and similar work conforming to Fe 290 Gde-E-165.

Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise proveded for, complete all as specified and directed.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

Supplying, laying and testing of 150 mm internal dia of double wall corrugaed (DWC) high density polythylene pipe (HDPE) and stiffness classes 8 (SN-8) with ISI marked (With CML No ) with and including all fittings & jointing materials for connection of inspection chamber/WC to first manhole of the sewage line complete all as specified and directed..

Surface dressing n exc 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches not exc. 1.5 Metre Wide and not exc. 1.50 Metre in Depth for foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes for laying of UG Cable/Pole/Stays etc, and getting out as in Soft/loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) n.exc.50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

Returning, filling in, trenches in soft /loose soil including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

M&L Cement concrete (1:4:8) type D2 ( using 40 mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M&L for brocken stone or boulders of hardcore of gauge n exc 63 mm deposited, spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface, complete all as specified and directed.

S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates,etc, complete all as specified and directed.

S&F for roof trusses (framed) trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam tee, angle, channel or flat sections) including clits etc confoRming to Fe-410-0 or Fe-310-0, complete all as specified and directed.

Taking down carefully existing unserviceable copper/ aluminium point wiring (light,call bell, two way, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators,bracket light fittings and making good to the disturbed surface, complete all as specified and directed.

Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes, complete all as specified and directed.

Taking down carefully unsv aluminium submain wiring of any type /loc including conduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing, complete all as specified and directed.

Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles, complete all as specified and directed.

M&L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI marked in walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for One light point controlled by one, one way switch 5 Amps, complete all as specified and directed.

All as per item No 112 above but, One ceiling fan / exhaust fan point controlled by one , one way switch and regulator, complete all as specified and directed.

All as per item No 112 above but, One 3 point 5 Amps socket outlets point controlled by one switch on the same board, complete all as specified and directed.

All as per item No 112 above but, One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board, complete all as specified and directed.

All as per item No 112 above but, One call bell point controlled by one bell push, complete all as specified and directed.

All as per item No 112 above but, for one light point controlled by one, two way switch 5 Amps, complete all as specified and directed.

All as per item No 112 above but, with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board, complete all as specified and directed.

S&F Switch piano ( in white ) flush type single pole one way 5 Amp, 230 Volts , complete all as specified and directed.

S&F Modular switch piano ( in white ) single pole flush type, two way, 6 amps, 230 volts, complete all as specified and directed.

S&F Socket outlet ( in white ) 2 in 1, 3 pin, 5 Amps, complete all as specified and directed.

S&F Switch socket combination ( in white ) flush type multipurpose 2/3 pin 5 Amps two in one , 230 volts , complete all as specified and directed.

S&F Switch socket combination ( in white ) 2 in 1 3 pin, 15 Amp flush type universal, complete all as specified and directed.

S&F ceilling rose ( in white ) three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm, complete all as specified and directed.

S&F bell push,( in white ) 5 Amp, flush type, complete all as specified and directed.

S&F Buzzer( in white ), Ding Dong AC. 230 volts, single pole , complete all as specified and directed.

S&F ceiling fan regulator step type ( in white ), flush type heavy duty suitable to work on 230 Volt AC supply , complete all as specified and directed.

S&F Lamp holder ( in white ) with insulated body, with back plate suitable for batten fittings , complete all as specified and directed.

S&F Decorative wall light fixture made up of polycarbonate suitable for 10W LED Lamp complete all as specified. Make : Model No. Comet Wall Light 30575 of Philips or equivalent in Havells/Surya.

S&F LED ADORE 10 W B22 CDL 5 STAR LAMP with B 22 base capacity 1200 lumen complete all as specified. Make : Cat No: LHLDEUEBML8Z010 of Havells or equivalent in CG /Surya.

S&F sheet metal enclosure MCB VTPN 4 way Double door Ready to use DBs - Provided with insulated vertical phase bus-bars |neutral bar/s with shroud/s | earth bar/s | sticking saddles | cement spill protector | color-coded interconnecting wire set | cable ties | blanking plates and circuit identification labels With provision for 4 Pole MCCB 100 A as incomer and SP/SPN MCBs as outgoing complete all as specified and directed. Make : Cat No: DBVTM004SD of L&T or equivalent in Legrand/Indo Asian.

S & F MCCB 4 Pole 415 volts 100 Amps with thermal - magnetic release with breaking capacity 25 KA and with adjustable overload setting complete all as specified. Make : Type- DN0-100C Model N0. CM92108OOL1OG of L&T or equivalent in Legrand/Indo Asian.

S&F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system complete all as specified. Make: Model No. DBSPN006D of L&T or equivalent in Legrand/Indo Asian.

S & F MCB Double Pole 32 Amps 240/415 Volt, confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Cat No. BB20320C of L&T or equivalent in Schinder/ Legrand.

S&F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, C-curve, complete all as specified and directed. Make : Model No. BB10060C,BB10100C,BB10160C of L&T or equivalent in Schinder/Legrand.

S&F wall mounted LED 18 watts ,Batten type T 8 light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including Ultra bright LED polycarbonate (T8) tube (Single side connection) 4' x 18 watts with G13 lamp holder complete all as specifiied and directed . Make : Model No. REGALBATTENT8UPTO1X18WDSBSWH For Batten Fitting and Model No.PHOTONULTRAE2.01213T8SSTL18WLED865SPC For T8 Tubelight of Havells, or equivalent in CG/Surya.

S&F wall mounted LED 10 watts ,Batten type T 5 Mirror light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specifed and directed. Make Havells/CG/Surya,

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 15 watts with pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete all as directed by Engineer-in-Charge. Make- Havells,Model No - ENDURAPEARLSL15WLED757SASYTOPCMP Or Equivalent in CG and Surya all as specified and directed.

M&L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation, complete all as specifed and directed.

Supply & Laying well burnt brick , locally available best quality (sub class "B" bricks ) laid in trences perpendicular to UG Cable protection, complete all as specifed and directed.

Supply & Laying LT heavy duty UG Cable of size 35 Sqmm 3.5 Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length, complete all as specified and directed.

S&F GI Tubing light grade of size 50mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc, complete all as specifed and directed.

S&F Bulk head in die cast aluminium housing & frosted glass suitable for 1 x 8W LED, complete all as specifed and directed. Make : Model No. RUGBY, LHKL01160099 , of Havells or equivalent in Surya/CG.

Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan, complete all as specified and directed.

M&L for replacement Sub main wiring 2 x 6 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduit and continuous earth wire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles, complete all as specifed and directed.

Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE : GI Pipe laid will be measured and paid separately under relevant Item.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.

MS Gautam Construction and CO

Sneh Construction Co

Saraswati Auto Works

MS Awash Ghosh and Brothers

M/S Singha Enterprise

R D ENTERPRISE

M/S Mahabir Traders

M/S Sun Enterprises