Karnataka

Active

Works

Other Works

Improvement of RBC Canal and service road of LIS B Point under IBP

Cauvery Neeravari Nigam Limited

CNNL MP Div Ramanagar | MYSORE, Karnataka

Amount: ₹4.1 CrCloses: 8 Jun 20263d left

Tender Value

₹4.1 Cr

EMD Value

₹6.1 L

Closing Date

8 Jun 2026, 9:30 pm3d left

Tender Inviting Organisation

Name

Cauvery Neeravari Nigam Limited

Work Description

Improvement of RBC Canal and service road of LIS B Point under IBP

Tender Information

Tender ID

302199

Reference Number

CNNL/2025-26/OW/WORK_INDENT3607/CALL-2

Tender Type

Open

Product Category

Other Works

Location

CNNL MP Div Ramanagar

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredKPWD Registration Certificate of class II and above

RequiredAnnual Turnover Certificate issued by CA for last five years

RequiredWork done Certificate with year wise executed quantity breakup duly certified by The Executive Engineer

RequiredLine of credit certificate in prescribed format

RequiredTender capacity calculation with existing commitments details

RequiredTechnical person certificates and CV

RequiredVehicle RC copies and Bills of the equipments

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The Intending bidder are advised to visit the site of work and also access the tender documents well in advance

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Conditional tenders will not be accepted.

The tenderer shall bear all costs associated with the preparation and Submission of his tender, and the employer will in no case be responsible and liable for those costs.

The TENDER PROCEESING FEE will not be refunded.

The CNNL reserves the right of rejecting all or any of the tenders without assigning any reasons,

If the quoted rates for the items fall below the estimated rates, the successful bidder should produce an additional performance Guarantee in the form of Bank Guarantee for the difference amount of quoted rates and estimated rates before executing agreement with CNNL. In case of contractor quoting rate above 125% of the estimated rates, then the amount over and above 125% will be withheld during the progress of work..

The contractor should be registered in respective class Category of KPWD / Any State / Central Government / Public sector organizations

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

The rates quoted by the contractor must be exclusive of GST and inclusive of sales Tax and any other duties, taxes, etc., The contractor is also required to pay quarry Fees, Royalties, Octroi Dues levied by the state Government or any Local body or an authority and ground rent, if any, charged by the Executive Engineer for stacking materials. No Extra Payment on this account will be made to the contractor.

Materials like steel, cement etc., required for the work shall be procured by the Contractor themselves and should get the same tested by the quality control authority of CNNL before use in this work.

All the formats prescribed in the bid document shall be filled by the bidders in a complete manner. Incomplete formats may constitute sufficient reason at the discretion of CNNL for rejection of the bid

All scanned documents to be uploaded shall be in original and the Executive Engineer will verify the original documents at any stage before recommending for approval.

Further particulars, if any, required by the bidders can be had from the office of the Executive Engineer, Manchanabele Project Division, Ramanagara during office hours on all working days. It may be noted that if any of the calendar of any event mentioned above happen to be General Holiday / Declared holiday, the next working day will hold good for the respective events

The work includes all lead and lift / de-lift and work shall be carried out as per instruction of engineer-in-charge of the work. And all the specification as per Indian road congress and all relevant Indian codes. The rate for the specifications in the Schedule-B includes all lead and lift, irrespective of distance and height

The intending bidders should note that if any of the land either in part / parts or in whole required for the work is not yet acquired by the Nigama, it shall be the responsibility of the bidder to take possession of such land and start the work by obtaining necessary consent of the land owners before commencement of work at no extra cost to the Nigama and no claim what so ever relating to non-availability of land will be entertained. Any delay in obtaining consent of the land owners shall not be considered for any additional compensation.

The undersigned reserves the right to either postpone or to cancel the entire process of tender

If CNNL wishes to engage third party consultants for quality control assessment, apart from the CNNL quality control and field tests, the contractor should co-operate with both Quality control authorities and the third party

Defect liability period will be 3 Years from the date of completion and satisfactory commissioning

Performance guarantee:- For all works an amount equal to 5.00% of the contract value will be withheld as Performance Guarantee Amount till the expiry of the defect liability period

Building and other construction workers welfare cess

The contractor shall subscribe 1.00% of gross amount of each bill payable to him in respect of contract to the building and other construction workers welfare cess as per GO No: LD 300 LET 2006, Bangalore, dated: 18-01-2007. The amount of subscription will be recovered out of payable amount to him in each bill. This component is deemed to have been included in the quoted rate / percentage.

The Tenderer should furnish the Name of the individual / firm/ Company with address and telephone number with place of registration, year of incorporation etc.,

The scanned signature of the bidders / authorized representatives of the bidders shall be attached while uploading the Bid document

The Tenderer should furnish the requisite Earnest Money Deposit

The Tenderer should furnish a copy of the Income Tax Return for the latest financial year

A copy of GST Certificate of the latest financial Year

Employees Provident fund Registration Certificate In respect of Contractors who are not registered with the EPF (Employees Provident Fund) authorities, the contractors should produce an undertaking that he shall within 7 days of the close of every month submit to the Executive Engineer, a statement showing the recoveries of contributions in respect of employees employed are through in and shall also furnish under the provision of the scheme to the commissioner, EPF However, having given an undertaking to this effect if the contractor does not furnish the information, the Nigama will deduct the necessary amount from the amount due to the contractor. Notwithstanding the above, the contractor will be liable for any consequential penalty /damages levied by the EPF authorities

The necessary certificates / documents in support fulfilling qualification criteria stipulated separately shall be scanned and attached to e-procurement document. The original document shall be produced at the time of opening of tender containing the Technical Bid for verification

The Bidder should also furnish the list of work on hand with all details. Such as bid cost, date of entrustment, stipulated date of completion, actual date of completion, completed cost of work, etc

Necessary certificates should be signed by an officer not below the rank of the Executive Engineer

The intending Bidder/firm/company/ should have man power available with him for taking up above work

The intending Bidder/firm/company/ shall provide evidence that the bidder has been actively engaged in the similar nature of work for at least for a period of 5 years prior to the date of submission of application

The intending Bidder/firm/company/ shall provide accurate information on the related application form about any litigation or Arbitration resulting from contracts completed or on going under its execution over the last five years. The consisting history of awards against the tenderer or any partner of a may result in failure of the application

The intending Bidder/firm/company shall provide the audited balance sheets or other financial statements acceptable to the employer for the last five years and must demonstrate the current soundness of the applicants financial position and indicate its prospective long term profitability. If deemed necessary, the employer shall have the authority to make enquiries with the applicants bankers

Technical Criteria

Past Experience

Satisfactorily completed (at least 90% of the contract value), as prime contractor, at least one similar work such as Improvements / Construction of road and drain of value not less than Rs.202.8 Lakhs Note: Work done certificate issued by competent authority not below the rank of Executive Engineer should be furnished Financial turnover & Work done of previous years indicated above shall be given a weightage of 10% per year to bring them to the price level of 2026-27

Work Done Certificate

Executed in any one year (for a continuous period of 12 months), the following minimum quantities of work(1) Cement Concrete (Cum) 2200, (2)WMM/WBM/GSB (Cum) 1050 ,(3) Steel (Tonne) 70, (4) SDBC/BC/DBM/BM (Cum)225 Note: Work done certificate with year wise breakup of quantities should be furnished.

Work Done Certificate

Capabilities of Vendor

Tenderers who meet the above specified minimum qualifying criteria will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underAssessed available tender capacity (AxNx1.5-B) Where A Maximum value of civil engineering works executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress,N Number of months prescribed for completion of the works for which tenders are invited, B Value at 2026-27 price level, of existing commitments and on-going works to be completed.

Others -- Tender Capacity Calculation with Existing Commitments details

List of Key Minimum Technical personal required for the work are as under and should be enrolled in company/ firm/company/ should Employment register and document should be uploaded of Civil Engineer / Diploma holders: Civil Engineering with Min 5 years experience of one No.

Others -- Technical person certificates and CV

Each Tenderer should further demonstrate Availability by owning at least 50% of the required following key and critical equipments for this work (b) the remaining 50 % can be deployed on lease/hire for all works provided, the relevant documents (Commitment agreements etc.,) for availability for this work are furnished. The intending Bidder/firm/company/ should furnish details of ownership / lease certificates of the following minimum requirement of machineries, (a) Excavator/JCB (2 own and 2 lease/hire)-04No.s, (b) Tipper (2 own and 2 lease/hire)- 04No.s, (c) Water tanker-(2 own and 2 lease/hire)-04No.s, (d) Concrete Mixer / Ajax (1 own and 1 lease/hire)-02No.s, (e) Vibrator Roller(1 own and 2 lease/hire)-03No.s, (f) Plate vibratory and Needle Vibratory (3 own and 3 lease/hire)-06No.s, (g) Auto levelling Equipment (lease / Hire / Own)-1No.s Note : The figures mentioned above is indicative, Should there be any change in above quantities the bidder should substantiate the same with calculations

Others -- Others -- Vehicle RC copies and Bills of the equipments

Financial Status

Achieved in at least two financial years an average annual financial turnover (in all classes of Civil Engineering construction works) only of Rs.811.10 Lakhs Note : Turnover certificate duly certified by Chartered accountant along with audited balance sheets should be furnished

Audited CA Certificate of Annual Turnover

Liquid assets and /or availability of credit facilities of no less than Rs 121.70 Lakhs (Credit lines/ letter of credit/ certificates from scheduled / nationalized banks for meeting the fund requirement etc.) in the prescribed format.

Line of Credit

Others

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Not applicable

Others -- Not applicable

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹6.1 L

Important Dates

Last Activity

30 May 2026

Published

30 May 2026

Bid Opening

9 Jun 2026

Download Ends

8 Jun 2026

Pre-Bid Meeting

1 Jun 2026

BOQ Preview

•

Improvement of RBC Canal and service road of LIS B Point under IBP

•

Excavation and removal of silt and silt mixed with sand from canal bed by manual means including disposing off the same in spoil bank or on the canal embankment in layers as directed with all other an...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant ...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

•

Additionalities for Formwork, Centering & Scaffolding for Sub structure including cost and conveyance of all materials, Labour, hire, charges of machineries and equipment, lead and lift, loading and ...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. Th...

•

Additionalities for Formwork, Centering & Scaffolding for Super structures including cost and conveyance of all materials, Labour, hire, charges of machineries and equipment, lead and lift, loading a...

•

Providing impervious filling adjacent to masonry / concrete structure and filling trial pits with soil available in adjacent area in layers of 100 to 150 mm and compacting each layer to density contro...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), c...

•

Providing and laying 80mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions upto 10MSA & for Residential ...

•

Providing and laying 100mm thick pre-cast cover slabs over drains & Rain pit of width not exceeding 800 mm using M20 concrete reinforced with Micro Alloyed High carbon steel with 3mm - 3ply wired stee...

•

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

•

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size mad...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Scarifying Existing Granular Surface to a Depth of 50 mm by Mechanical Means using Hydraulic excavator with all lead and lift as per the directions of the Engineer-in-charge of the work.

•

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towar...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification Sandy material complete with all lead and lift as per the directions...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared surface mixing by mix in place meth...

•

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to mee...

•

Prime Coat over WMM/WBM. Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0...

•

Bituminous Macadam Grading - II for traffic 20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specifie grading premixed with bituminous...

•

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broomwith all lea...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bitumi...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectoris...

•

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory rolle...

•

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

3607 call2 KW4.doc

Tender Document • 3.81 MB

Ready to Participate?

Download all tender documents and submit your bid

Improvement of RBC Canal and service road of LIS B Point under IBP

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?