PWD/SE/KEC/NIT03(2nd Call)/24-25

Amount

SITC of Automatic Lift ( as per manufacturer design & as per detailed specification below conforming to IS ) and putting into operation after final testing in the existing lift shaft complete with all accessories and repairing the damage wall / floor if any etc to complete as reqd. Make : OTIS / KONE/SCHINDLER

Type: Passanger Lift . Load : 10 Passenger / 680 Kg Control: Microprocessor based with serial communication , controller in shaft and user interface in landing. Drive : AC VVVF drive with feedback control (Closed loop) Machine:- Energy efficient machine: Gearless, without Machine Room . Position of Machine Room: MRL Speed: 1.5 Mtrs./ Sec Floor served: G + 7 Landing: 8 lands, all on same side Total Rise : 22.75 Mtr (Approx) Operation: Microprocessor based simplex full collective with or without attendant. Signals: Digital car position indicator,car travels direction indicator in car & at all landing with call registration indicator. COP and LOP must have stainless steel faceplate silver brushed with surface mounted button with braille. Button : All buttons on car& landing shall be luminious and encoded with braille on / off switc for lift ,fan, light, toggle switch or key switch for autometic / attended mode of operation. Display type : Color LCD / Segmented LCD / LED. Opration push button for lift maintainnence & service should be on top of the car. Travelling accuracy:± 5 mm(Micro levelling arrangement )

CAR Car inside As per OEM Car Entrance: Clear Opening:- 800mm x 2000mm protected with car door Car Enclosure: Stainless Steel sheet (20 SWG) with Hairline finish with hand rail. Car Ceiling & Lighting: Stainless Steel with hairline finish with LED lighting and Fan. Car Ventilation: Pressure fan with anodised aluminium grill. Car Flooring : Decorative granite flooring (As per direcion of EIC and according to this Department's Order). Car Door: Stainless Steel centre opening (COPD)/Telescopic opening (TSPD) automatic door provided with AC V3F controlled door drive system with full height infrared curtain of light and mechanical force limiting divice. Landing Door: Stainless steel centre opening (COPD)/ Telescopic opening (TSPD) automatic door provided with AC V3F controlled door drive system with fire rating of 120 min. Door Opening: Automatic power oprated door with full length Photocell assembly light curtain sensor / infrared detector.

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of power failure / single phasing / others. Overload Protection:Fully loaded with overload protection.On overloading the lift car will not start with door remaining open and give audio & display indication. Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery operated intercom system in Lift Car, Machine Room & Control Room Emergency Alarm: Battery operated alarm bell system in lift car and control room Fireman switch: Fireman switch at main landing terminal. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Car Parking at top floor at idle condition. Main wire rope/ Belt - As per manufacturer's standard conforming to IS. Auto Fan cutoff.

DIMENSION OF SHAFT & POWER SUPPLY Available Shaft Dimension: 1855 mm (W) X 1750 mm (D) Pit Depth :1600 mm (Bidder should visit the site) Overhead : 4500 mm ( (Bidder should visit the site) Electric power supply: AC 415 Volt 3phase, 50 Hz, terminated in BDB at top landing as per IS. N.B. 1) Rates should be quoted with minor civil works, wall cutting and mending good the damages to the original finish. 2) Necessary MS member eg; angle iron, MS channel brackets etc as required to be provided by the manufacturer.

SCHINDLER INDIA PRIVATE LIMITED (BID ID -5385290)