Annual Maintenance of whole Electrical Installation of Aliah University, Newtown Campus------Replacement of recess mounted LED fittings and allied EI work at Academic building

Supplying and fixing of 6 way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Incoming : 415V 63A TPN MCB of Breaking capacity 10kA & C characteristics. Outgoing : 240V 6-32A SPMCB of Breaking capacity 10kA & C characteristics.----18 nos. (Make- Legrand/ L&T/ Schneider)

Supplying and fixing of (2+8) way double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment etc. as per direction of EIC. Incomer : 240 V 32A DP MCB Isolator. Outgoing : 240V 6-16A SPMCB of Breaking capacity 10kA & C characteristics.---08 nos. (Make- Legrand/ L&T/ Schneider).

Supply & Laying of 1.1 KV Grade XLPE/PVC insulated, PVC sheathed, steel Armoured Al. conductor Cable of the following size, and conforming to IS: 7098 (Part-I):1988 as amended upto date, in respect of component materials and tests, and as per the approved makes list attached herewith incl. S& F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting: [Make: RR Kabel/Polycab/Havells/Gloster] a) 4 core 25 sq mm XLPE Al Ar cable.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below. a) 4 core 25 sq. mm. XLPE Al. Armoured cable.

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. a) 4 core 25 sq. mm. XLPE Al. Armoured cable.

Supply & delivery of 20 watt slimline ultra LED tube light set on ceiling surface/ existing fittings having 5800K- 6000K, LED, luminous efficiency not less than 100 Lm/Watt Driver wattage should be greater than or eual to the rated fittings wattage by replace existing fittings incl. all accessories as required as per direction of EIC. (Make: Wipro/Philips- Signify/ Crompton)

Fixing of 20 watt slimline ultra LED tube light set on ceiling surface/ existing fittings having 5800K- 6000K, LED, luminous efficiency not less than 100 Lm/Watt Driver wattage should be greater than or eual to the rated fittings wattage by replace existing fittings incl. all accessories as required as per direction of EIC.

Supply & fixing of 36 watt recess mounted, 2' x 2' LED Fitting having CRCA powder coated ribbed housing 6500K LED, luminous efficiency not less than 100 Lm/Watt Driver wattage should be greater than or eual to the rated fittings wattage incl. all accessories as required as per direction of EIC. (Make: Wipro-CRCO10R030HP57G3/Philips- Signify- RC380B LED42S-6500 G5 L60W50 PSU OD S1/ Crompton- equivalent)

Supply & Fixing 240 V 6 A Modular type switch (Schneider make) on existing GI Modular type switch board having top cover plate and making necessary connections as required as per direction of EIC.

Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Schneider make), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.as per direction of EIC.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand Approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc as per direction of EIC.

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Schneider make), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.as per direction of EIC.

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. a) 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. a) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 32mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. a) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 2 x 6 sqmm + 1 x 4 sqmm.

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 2x2.5 sq. mm. + 1x1.5 sq. mm.

Finishing of the PVC insulated wire ends by socketting with pin/ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. a) 2x4 sq. mm. + 1x2.5 sq. mm.

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Schneider make) on existing Modular GI switch board with top cover plate incl. making necy. connections etc. as per direction of EIC.

Supply and Fixing only 12" exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust as per direction of EIC. (Make - EPC or Similar)

Supply & Fixing of 12" Al louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) etc. as per direction of EIC.

Note:- Rate should be quoted inclusive of all taxes and duties including GST.

Please Enable Macros to View BoQ information