PROCURMENT OF FURNITURE AGAINST SURVEYED OFF FURNITURE AT RALAWAS NAGTALAO UNDER GE BANAR

Amount

CHAIR DINING (FD-279) Overall size shall be 440mm long, 430mm wide and 890mm high. All wood shall be first class hard wood teak. Front leg shall be 30mmx55mm in section 460mm high and rear leg shall be 30mmx55mm in section 890mm. Two side stiffener shall be 20mmx25mm in section and one middle stiffener 20mmx25mm shall joining short stiffener. Cane shall be 2mm wide 0.4mm thick. French polish shall be on wooden surface. Hard rubber shoe shall be screwed on legs. Rest all as per drg & as specified.

CHAIR EASY (FD-229) All wood shall be first class hard wood teak. Front leg shall be 70mmx25mm in section 520mm high. Rear leg shall be 70mmx25mm in section slanting 185mm horizontally in the height of 490mm. Cushion shall be 75mm thick foam cushion density 32 density with upholster with leatherised Rexene of approved shade as directed by Engineer-in-charge. Wooden surface shall be French polish. Hard rubber shoe shall be provided on leg. Rest all as per drg & as specified.

CHAIR EASY WITH CUSHION (FD-358) Overall size shall be 520mmx185mmx490mm. Cushion 75mm thick foam cushion of 32 density with upholster with leatherised Rexene of approved shade by E-in-C. French polish shall be polished to wooden surface. Hard rubber shoe shall be screwed on legs. Rest all as per drg & as specified.

HAT STAND WITH MIRROR (FD-233) 4mm thick one side teak finish ply shall be provided with teak wood edging. 3.5mm thick BWR grade ply shall be provided on backside. Pegs shall be copper oxidized steel. 5.5mm thick mirror shall be used (Make: Atul/Goldfish/Kohinoor) of first quality. French polish shall be on wooden surface. Rest all as per drg or as specified.

TABLE PEG (FD-384) Overall size shall be of 450mm long, 300mm wide and 380mm high. Wood shall be first class teak wood. Top shall be 18/19mm thick prelaminated post forming MDF board. Wooden surface shall be French polish. Hard rubber shoe shall be on legs. Rest all as per drg & as specified.

SOFA SET 4 SEATER COUSHION (FD-281) Size shall consist of four small pieces of one seat. Wood shall be of first class hard wood teak(MP). Legs shall be of 70mmx35mm in section. Wooden arms shall be made to shape out of 35mmx70mm in section teak wood. Front and side rails shall be of 35mmx100mm teak wood. 40mmx40mm wooden bearers shall b provided at the bottom of seat over which seven numbers 50mmx20mm wooden battens shall be fixed equally spaced in single piece seat. The filling in the back frame of single piece shall be done with four numbers 50mmx20mm in section teak wood battens. Back shall be made of frame of rails and styles of 70mmx35mm. Wooden rails 30mmx50mm in section shall b provided between back legs for support of back frame. 100mm thick seat cushion of 'cool' foam of 32 density. 530mmx500mm, covered with tapestry cloth shall be provided at seat and back. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish.

TABLE BED SIDE (FD-276) Overall size shall be 450mm long, 230mm wide and 510mm high. Side of table bed side shall be of 18mm thick particle board having teak veneer face on one side and commercial on other. Top shall be of 18mm thick particle board having teak veneer face on top. 6mm thick commercial plywood shall be fixed at the back of table bed side. 12mm thick shelf shall be provided at 100mm high from bottom. Shelf 12mm thick shall be provided at 179mm from top. 12mm thick shelves shall be of particle board with teak veneer surface on top and commercial on other side. All wood and particle board surfaces exposed to view when placed in position shall be French polished with high gloss finish. Rest all as per drg & as specified

TABLE CENTER TWO TIER (900MM X 450MM X400MM) (FD-274) Overall size shall be 900mm long. 450mm wide and 400mm high. Wood shall be first class teak wood. Legs shall be made of 60mmx30mm in section 356mm high. Top shall be prelaminated post forming MDF board with 18/19mm thick. Legs shall be provided hard rubber shoe. Wooden surface shall be French polish. Rest all as per drg & as specified.

TABLE DINNING 8 PER) (FD-273) Overall size shall be 1800mm, 900mm wide and 760mm high. All wood shall be of first class hard wood teak. Legs shall be of 75mmx40mm in section and 722mm high. 5mmx5mm in section groove shall be provided in the visible portion of top of legs. 25mm thick and 100mm high teak wood rail shall be provided at top of the legs joining the legs in long and short sides. Top shall be prelaminated post forming MDF board with 18mm thick. Legs shall be provided hard rubber shoe. Wooden surface shall be French polish. Rest all as per drg & as specified.

TABLE DINING 6 PERS (FD/MAP-II/03) Overall size shall be 1500mm long, 900mm wide and 760 mm high. All wood shall be of first class hard wood teak. Legs shall be of 75 mm x 40 mm in section and 722 mm high. 5 mm x 5 mm in section groove shall be provided in the visible portion of top legs. Top shall be pre-laminated post forming MDF board with 18 mm thick. Legs shall be provided hard rubber shoe. Wooden surface shall be French polish. Rest all as per drg & as specified.

TABLE DRESSING GENTS WITH MIRROR (FD-230) Overall size shall be 900mm long, 300mm wide and 150mm high at bottom. The frame of mirror shall be of overall size of 410mm wide and 790mm high, fixed at 150mm from top of lower base. Bottom shall be of 12mm thick pre-laminated MDF board with teak veneer face on both sides. Two side drawers equally spaced having 255mm in the middle. Two supports of 25mmx35mmx115mm teak wood batten shall be provided as shown on drawing 5.5mm thick mirror of Modiguad/Atul shall be provided on 6mm thick plywood backing. Wooden surface shall be French polish. Rest all as per drg & as specified.

TABLE WRITING (FD-275) Overall size shall be 1145mm long 600mm wide and 760mm high. Wood shall be first class hard wood teak. Top shall be prelaminated post forming MDF board with 18/19mm thick. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TABLE COMPUTER (F/E6/MAP/03) Every plank/board shall be made of 18mm thick prelaminated MDF board conforming to grade-I & type-II. The pre-laminated MDF board shall conform to the specified requirements given for "ECO-MARK". The frame work shall be made of 25x25x16 gauge thick CRCA box section and supported on 25x50mmx16 gauge thick CRCA box section, duly covered with PVC cover. The drawer & key board shall be provided to the base of the unit for adjustment of 50mm height. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

Description of Work / Item(s)

Amount

ALMIRAH LARGE STEEL 1/2 (H) 1/2 (S) (FD-1033) Overall size shall be 910x490x1900mm made of MS sheet. Lock shall be provided with duplicate keys. 1mm thick MS sheet shall b provided for leg, body and shelf. Handle shall be chrome plate. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

ALMIRAH LARGE STEEL WITH SHELVES (FD-1031) Overall size shall be 910x490x1900mm made of MS sheet. Lock shall be provided with duplicate keys. 1mm thick MS sheet shall be provided for leg, body and shelf. Handle shall be chrome plate. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

ALMIRAH STEEL MEDIUM (FD-1032) Overall size shall be 760mm long, 440mm wide and 1270mm high. Lock shall be provided with duplicate keys. 1mm thick MS sheet shall be provided for leg, body and shelf. Three butt hinges of 75mm thick to each shutter. Handle shall be chrome plate. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

BOOK SELF STEEL (FD-1028) Overall size shall be 840mm long, 310mm wide and 1675mm. Back, sides, bottom, top and shelves shall be of 1mm thick. the shutters of each compartment shall open towards top and slide into the depth of the book case. Two steel handles of 100mm long shall be provided to each shutter of the compartment. The locking device shall be provided to each compartment. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

CHAIR VARANDAH (FD-359) Over all size shall be 460mm long 600mm wide and 760mm high. Legs shall be made of 20mm dia and 1.6mm thick mild steel conduit pipe. The horizontal distance between legs at steel level shall be 450mm and shall be weaven with 4mm wide plastic cane. All exposed steel surface shall be painted with two coat of white coloured enamel paint over a coat of primer. Rest all as per drawing.

TABLE OFFICE CLERK STEEL (FD-1004) Overall size shall be 1200mm long 610mm wide and 760mm high. Steel frame of overall size shall be 1160mm long, 570mm wide and 742mm high. Four legs of 25mm mild steel tube of 1.6mm wall thickness. Locking device shall be provided to drawers. Top shall be prelaminated post forming MDF board with 18/19mm thick. Two coat of enamel paint over a coat of primer with spray on all surface. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TABLE WITH DRAWER STEEL 900MM X 600MM X 760MM (FD-1008) Overall size shall be 900mm long 600mm wide and 760mm high. Steel frame shall be of 800mmx500mmx742mm. Leg shall be 25mm square MS tube 1.6mm thick. Drawer shall be 500mm deep with locking arrangement. Top shall be prelaminated post forming MDF board with 18/19mm thick. Two coat of enamel paint over a coat of primer with spray on all surface. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TABLE 3' X 2' W/O DRAWER (FD-1007) Overall size shall be 900mm long, 600mm wide and 760mm high. Steel frame shall be 800mmx 500mmx 742mm. Legs shall be 25mm square MS Tube 1.6mm thickness. Top shall be 18mm thick MDF board with teak wood edged. Rest all as per drg.

BED HARD MS SQUARE PIPE FRAME (FD/E6/MAP/08 (R)) Overall size shall be of 2050x900 on plan with foot rest height of 500 & head rest of height 800mm. The frame shall be long rails 25x65mm box section of 16 gauge, short rails shall be 25x65mm box section of 16 gauge. Frame work for foot board and head board shall be 18x18mm box section of 16 gauge. Stiffeners shall be 04 nos each of 25x25mm box section of 16guage. The top shall be 12m thick BWR grade plywood confirming to IS-303. The main frame work foot board and head board along with legs shall be made out of 38x38mm with 16 gauge thick. The foot board and head board shall be covered with 18mm thick pre-laminated particle board of BWR grade. Two coat of enamel paint over a coat of primer with spray on all surface. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TABLE BED SIDE (FD/E6/MAP/15 (R)) Over all size 450x450x600mm. (Upper side 150mmx450mm. Lower side 500mmx450mm). Frame shall be made out 18x18mm CRCA box section. 18mm square pipe (18 gauge) black powder coated. Drawer shall be made of 18mm thick prelaminted particle board of BWR grade. Back shall be covered with 5.5mm thick plywood of BER grade. All edges shall be finished with teak wood edging 15mmx8mm thick. Drawer shall be run on powder coated telescopic channels of 1.6mm thick. Handle shall be 100mm long powder coated. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

CHAIR WRITING (FD/E6/MAP/12) Seat and back are made up of 12mm thick hot pressed plywood upholstered with acrylic fabric and moulded polyurethane foam together with seat and back covers. The back foam is designed with contoured lumber support for extra comfort. Armrest are made of black integral skin polyurethane with 75-85 Shore 'A' Hardness and reinforced with MS insert. The size of armrest is 24.0cm (L) x 6.4(W) x 3.3cm(T). Frame shall be CRCA section of 10x25mm & provided with PVC stoppers. Rest all as per drg or as specified.

RECEPTACLE PVC (FD/E6/MAP/13) Size shall be made of thick polymer plastic of 20lit capacity. Reinforced ribs shall be provided for better strength. Shape shall have conical shape & provided with a polymer plastic lid. Two SS handle shall be provided. Color shade shall be got approved. Rest all as specified or as per manufacturers directions and approved by GE.

B.S Constructions

BHARAT BUILDERS

B.S Constructions

BHARAT BUILDERS