Execution of work Museum Upgradation Civil and Electrical to Repair and Development of Existing Sculpture Shed Building to Site Museum at Sun Temple Modhera

Execution of work under following items

Towards the demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer - in- charge. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm. (Including all the materials & labour charges etc. complete as direction by site in charge)

Earth work in excavation by manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and laying in position cement concrete (pcc) of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement: 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platform. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressummers and cantilevers. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level: 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size). (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand). (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse sand) (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the CEMENT PLASTER (IN COARSE SAND) 20 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand) (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the CEMENT PLASTER ((IN COARSE SAND)) 12 mm cement plaster of mix: 1:4 (1 cement: 4 fine sand) (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero-chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double Charge Vitrified floor tiles polished finish of size of Tile 1000 x 1000 mm. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size - 1200mm X 600 mm. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and applying white cement-based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and color : New work (two or more coats) over and including water thinkable priming coat with cement primer having VOC content less than 50 gram/litre. (Including all the materials & labour charges etc. complete as direction by site incharge)

Towards the finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) : Second class teak wood. 35mm thick shutters. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete: 150x125x27x5 mm. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 250x10 mm. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing bright finished brass door latch with necessary screws etc. complete: 300x16x5 mm. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing white vitreous china wall hange type water closet ((490 x 355 x 380mm / 490 x 325 x325 mm) (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing concealed cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 280X335X465 mm size including flush pipe with all fittings, including cutting & making good the walls. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing wash basin counter type with granite slab C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin sizes 500 x 400 x 140mm mm or 450 x 330 x 130mm with a pair of 15 mm C.P. brass pillar taps. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing 2 Way Bib Cock with Wall Flange. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing Health Faucet of approve quality. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing Waste Coupling for wash basin and sink, of approved quality and colour. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 15 mm nominal bore. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing C.P. brass angular cock of approved quality conforming to IS:8931: 15 mm nominal bore. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing of Bottle tap for connection from wash basin and Urinal basin to waste water pipe through the wall all complete as per the direction of engineer-in-charge. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing & Fixing Necessary fittings like Mirror of suitable size, Towel ring, Liquid container, Soap Container, Holder for hand shower, toilet paper holder, hooks, holder etc. as per requirement for bathroom including all charges complete as per direction Details: 1) Towel Rail 600mm Long - 01 no.,2) Towel Ring Round - 01 no.,3) Soap dispenser -01 no. 4) Toilet Paper Holder - 01no. Wash basin mirror - 01 no. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing Push Tap with Wall Flange auto closing system. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and fixing plasticized PVC connection pipe with brass unions: 45 cm length,15 mm nominal bore. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and installing square water tank (1000 litre capacity) above roof upto 4m height. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Including all the materials & labour charges etc. complete as direction by site in-charge) ((a 20 mm Nominal dia Pipes)

Towards providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. (Including all the materials & labour charges etc. complete as direction by site in-charge) (b. 25 mm Nominal dia Pipes)

Towards providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold-water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 50 mm nominal dia Pipes. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipe for soil, waste and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all necessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without door), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/celling/floor level support by hangers etc in concealed/ inside duct/under floor & basement celling / external work etc. including chase cutting as required excavation and back filling in all kind of soil suspended from floor under false celling or embedding the pipes laid under floors / building in 75mm. Around 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of shuttering for proper completion of work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS : 5382. : The pipes will be supported with threaded G.I rods & U clamps with nuts, washers etc on 50x50x5 mm slotted angle. The cost will include all support arrangements. The work include commissioning of all pipe lines as per drawings and specifications and as directed by Engineer-in-charge: 100 mm nominal dia. (Including all the materials & labour charges etc. complete as direction by site in charge)

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing on wall face unplasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing on wall face unplasticized - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing on wall face un plasticised - PVC molded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing on wall face un plasticized - PVC molded fittings/ accessories for un plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm Shoe. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and fixing un plasticized -PVC pipe clips of approved design to un plasticized - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete. 75 mm. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards the dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 meters lead. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards the cheered terrazzo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) Light shade pigment using white cement. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8 mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards providing and laying 60 mm thick factory-made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (Including all the materials & labour charges etc. complete as direction by site in-charge)

Towards the supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (Including all the materials & labour charges etc. complete as direction by site in charge) a. 25 mm

Towards the supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. (Including all the materials & labour charges etc. complete as direction by site in charge) b.32 mm

Towards the supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required. (Including all the materials & labour charges etc. complete as direction by site in charge) ( a. 3 x 1.5 sq.mm )

Towards the supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (b. 4 x 1.5 sq. mm

Towards the supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (c. 5 x 1.5 sq. mm )

Towards the supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (d. 6 x 1.5 sq. mm )

Towards the supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required. (Including all the materials & labour charges etc. complete as direction by site in charge)(e. 3 x 2.5 sq.mm )

Towards the supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required. (Including all the materials & labour charges etc. complete as direction by site in charge)( f. 3 x 4 sq.mm )

Towards the supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface PVC conduct as required. (Including all the materials & labour charges etc. complete as direction by site in charge)(g. 3 x 6 sq.mm )

Towards the supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (a. 1 or 2 Module 75mmX75mm)

Towards the supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (b. 8Module (200mmX75mm)

Towards the supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (c. 12Module (125mmX125mm)

Towards the supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (a. 5/6 amps switch)

Towards the supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge)(b. 3 pin 5/6 A socket outlet)

Towards the supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6- & 15/16-amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 16-way, Double door. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4+36), Double door. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 Amp, 36 KA, FPMCCB. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (a. single pole)

Towards the supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) ( b. double pole )

Towards the supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Including all the materials & labour charges etc. complete as direction by site in charge) ( c. Triple pole)

Towards the supply, installation, testing and commissioning of LED mossensecener ceiling mount light, system wattage not less than 9W along with all accessories, connection and to be fitted on wall/ down rod/ chain etc complete as required. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the supplying & fixing of 400 mm Wall fan along with all accessories including connection, testing commissioning etc complete as required. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the supplying & fixing of 300 mm Exhaust fan along with all accessories including connection, testing commissioning etc complete as required. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes [KG]. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the supplying and fixing Cultural Notice Board (CNB) made of yellowish Jodhpur sandstone, comprising a plaque of size 1.10m x 0.75m x 0.10m, fixed in an inclined manner on a stone pedestal of 1.86m height. The pedestal shall be embedded 0.60m below ground using 1:4:8 cement concrete, including necessary earthwork. The plaque shall have trilingual engraving (Gujarati, Hindi & English) as per approved design. including chamfering and moulding the edges of pedestal, plaque etc complete in all respects including material, labour, transportation, and finishing. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and fixing Jodhpur Yellow stone tri-lingual cultural Small Direction board in English, Hindi and Gujrati of size (0.4m x 0.75m x 0.1m) in between Jodhpur Yellow stone base (0.4m x 0.75m) and height 0.15m o Write up should be engraved (Avg.500 characters) on Jodhpur Yellow stone surface with all graphic work as required including moulding work, earth work, cement concrete etc all as per instruction of EIC . (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards the supplying and fixing Brail Cultural Notice Board (CNB) made of yellowish Jodhpur sandstone, comprising a plaque of size 1.10m x 0.75m x 0.10m, fixed in an inclined manner on a stone pedestal of 1.86m height. The pedestal shall be embedded 0.60m below ground using 1:4:8 cement concrete, including necessary earthwork. They shall be fixed as per approved design. including chamfering and moulding the edges of pedestal, plaque etc complete in all respects including material, labour, transportation, and finishing. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and constructing a decorative stone fountain of approved design as per architectural drawing, including circular base, central pedestal, and ornamental bowl with carved detailing; complete with proper alignment, finishing, and necessary plumbing arrangements for water circulation. The work includes dressing, rubbing, and finishing of stone surfaces, fixing in position with cement mortar with matching pigment, curing, and making good all joints, complete as per drawing, specification, and direction of the Engineer-in-Charge. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supply and installation of Letter signages made in brass (in good quality as approved by department) installing at site up to 4 metre height including all material and labour charges as per the direction of site in charge (Payment will be made per letter and writeup will be provided by department). (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supply, Installation, Testing & Commissioning of Network Full HD 1/2.7” 8MP (3840 × 2160) @20fps PS CMOS Image Sens Dual Bullet Camera, 3.6mm fixed Lens, IR Range 60Mtr. IP67, 1/2.7” 8MP PS CMOS Image Sensor (0.9407 centimeters). (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supply, Installation, Testing & Commissioning of Network Full HD 1/2.8” 2MP Full HD Network IR Bullet Camera, 3.6mm fixed Lens, IR Range 100Mtr. IP67, Max. 25/30fps@1080P, 1/2.7” 2MP CMOS Image Sensor (0.9407 centimeters), Up to 300 presets, auto scan, 8 tour, 5 pattern, auto pan, Powerful 25x Optical and 16x Digital zoom. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supply, Installation, Testing & Commissioning of 16 Port PoE Network Manage Switch 10/100/1000, having 370W PoE capacity including connection interconnection complete as reqd. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supply, Installation, Testing & Commissioning of NVR, 16-Channel IP UHD NVR (Network Video Recorder) Up to 16 Channel IP Camera input, Interstream, H.265, H.264+, H.264, MJPEG, AI by Recorder: Support 4 channel SMD,AI by Camera: Support perimeter protection and SMD,Max. 144/144/72 Mbps incoming/recording/outgoing bandwidth Support 2 SATA HDDs up to 20TB, 2 USB ports(2.0), HDMI / VGA simultaneous video output, Mobile Software: iCMOB, gCMOB, CMS Software: KVMS Pro Lite. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supplying, Installation testing and commissioning of following equipment and accessories complete with all including connection interconnection etc as reqd. (Including all the materials & labour charges etc. complete as direction by site in charge) ( 9U rack for PoE switch )

Towards supply, installation and testing commissioning 32" LED TV suitable for operation of display HDMI Cable. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required. (Including all the materials & labour charges etc. complete as direction by site in charge) (1 run of Cable)

Towards provision for temporary covering the Sculptures by 19mm ISO 303 plywood and 50X 50 X 5 mm MS structure including packing the inside by using thermocol sheet, bubble sheet and tarpaulin all complete as per the direction of site in charge. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supplying, designing and fixing tensile fabric of weight not less than 950 GSM. It has tensile strength (warp/weft) 420/400 daN/5cm & tensile resistance (warp/weft) 55 /50 daN. This should also include cutting, welding and cables, plates and necessary hardware for fixing the fabric as approved shape as per drawing, membrane shall be cut and manufactured with high frequency PVC welding machine over steel frames with all fittings and fixtures such as Swage End, Fork, Membrane Plates, GI Flat Bar etc. with necessary tensioning material etc complete. Job includes: (i) All fittings & fixtures such as Swage End & Fork are in SS 304 grade. (ii) All fittings & fixtures such as membrane plates, flat bar’s & cables are galvanized. (iii) All patterns should be cut from single sheet of fabric. (iv) Min. 40 mm width welding on high frequency machines. (v) All patterns should be single laid. (vi) All panels should be cleaned & marked before packing. (vii) Details of seams on the membrane. (viii) Details of tensioning & clamping of the membrane. (ix) Standard reducing warranty should not be less than 18 years by manufacturer. [Preferable brands - SERGE FERRARI, SIOEN, SATTLER, MEHLER, SAULEDA] (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards provision for existing solar panel uninstallation before execution of civil work at roof and re installation after completion of work including all complete as per the direction of site. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supply, installation, testing and commissioning of brillante Linear wall washer out door light, system wattage not less than 9W Crafted from Aluminum Die Cast with Bi-Directional Beam. Its integrated LED ensures long-lasting and energy-efficient with IP65 Protected. along with all accessories, connection and to be fitted on wall/ down rod/ chain etc complete as required. (Including all the materials & labour charges etc. complete as direction by site in charge)

Towards supply, installation, testing and commissioning of Flexion Led AC Rope or Strip out door light, system wattage not less than 9WHigh brightness IP65 LED rope with uniformity of light required for perfect outdoor application along with all accessories, connection and to be fitted on wall etc complete as required. (Including all the materials & labour charges etc. complete as direction by site in charge)

Please Enable Macros to View BoQ information