Special repairs to Building No P-08 at Dholewal under GE Ludhiana

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified.

Demolition of cement concrete (reinforced)of any description and in any position not otherwise specified provided for in ground floors and pavings n.exc 15cm thickness ( below or above ground level) complete all as specified.

Dismantling brick tiles or terracing tiles, single layers including any treatment on roof complete all as specified.

Demolition mud phuska in roofs any thickness incl plastering and leeping(whether full thickness removed or only a part thereof) complete all as specified.

M&L for priming surfaces and applying normal treatment (for moderate conditions) using bitumen primer @.30 Kg/Sqm applied hot complete all as specified

M&L applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm incl cleaning surfaces complete all as specified.

M&L rendering 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).

M&L providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) laid on primed surfaces by torched application APP based polymeric membrance complete all as specified and directed by Engineer-in-Charge.

M&L for Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate average thickness 50mm as in roof padding incl mixing water proofing compound complete all as specified and as directed. Note. water proofing compound shall be measured and paid seperately)

M & L 40 mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement on cement mortar complete all as specifed and directed.

M & L 40 mm thick brick tiles laid on cement mortar and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement on cement mortar complete all as specified and directed but except tile (Old tiles shall be re-used)

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified

Supply only Integral water proofing compound (ISI marked) complete all as specified

M&L PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregates) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specfied and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified & directed by Engineer-in- charge.

M&L formwork to edges of concrete flats as in roof slabs exc 10 but n exc 20 cm wide suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified.

M&L formwork to soffits of suspended slabs n exc 200mm thick for rough finished surfaces of concrete flat complete all as specified.

M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified.

M&L for RCC (Nominal Mix, 1:2:4, (20mm graded stone aggregates) as in slabs supported on walls complete all as specified (Reinforcement and formwork shall be measured and paid separately)

M&L, Granite slab 20 mm thick (table rubbed and polished) as in steps, jambs,pillars, window-cill, cooking platform over and including 15mm thick bedding layer in cement mortar (1:4) and pointed with white or colour cement (1:2) using marble dust with admixture to match the shade of granite complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing, serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding layer in cement mortar (1:6) complete all as specified.

All as per Item no 22 but on vertical Surface as in Skirting including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

M&L Non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm, in neat cement slurry and pointed in white or coloured cement with pigment to match over and including15mm thick screed bed in cement mortar (1:6) all as specified and directed.

M&L glazed ceramic coloured tiles 450mm x 300mm x 6 to 7mm thick on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick bedding layer in cement mortar (1:3) including necessary cutting as per site requirement complete all as specified and directed by Engineer-in-Charge.

All as per item 24 above but in riser of steps, skirting & dado laid over and including 10mm thick cement screed in CM 1:4 complete all as specified.

Demolition of brickwork built in cement or cement lime mortar incl all quoins, arches, pillars, etc but excl ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 all as specified and directed.

Taking down chowkats or frames(without taking off shutters from the frame) area n.exc 1.5 Sqm each complete all as specified.

Taking down chowkats or frames exc 1.5 Sqm but n.exc 4.0 Sqm with shutters (without taking off shutters from the frame) complete all as specified.

Dismantling boarding any description , fixed in any position with nails complete all as specified.

S&F in Pre-laminated particle board 18/19mm thick, interior grade, pre laminated one side decorative choice lamination and side balancing white,fixed in frame, complete all as specified and as directed by Engineer –In -Charge.

S&F anodised aluminium frame of .55 kg/m for door, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F three track powder coated aluminium sliding type window with frame without shash bars,aluminium section weighing not less than 0.55kg/RM including necessary jointing cleats,glazing clips,rubber packing anodised aluminium snap beading screws,etc,Two shutter to be fitted with 5 to 6 mm thick tinted glass & one shutter to be fitted with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aprture 1040mm guide channel at top and bottom with suitable roller including necessary aluminium builders hardware( locking arrangement), Complete all as specified and directed by Engineer-In- Charge.

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet reinforced with MS square tube suppling & fixing in opening as per specification and drawing.

S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.

M&L for Box type steel made out of 1.25mm thick sheet window/ventilator made of ERW tube P-section of size 60 mm x 25 mm single rebated outer frame, comprises glazed skelton of ERW tube P-Section size 50mm x 20mm with one/two Nos open able leaf consisting of two Nos Sach bar of T-section 20x3 mm welded to frame with one or no vertical mullion of ERW box type T Section of size 60mm x 25mm and F1 2mm thick welded/screwed to frame for fixing of glass incuding fittings and fixtures like handle, Tower bolt, stopper, Cleat, Pintal Hinges, holdfasts etc complete including cutting holes, making good dismantled portion in PCC 1:2:4 type B-1, all as specified and directed. (a) Holdfast 150mm long of 12mm x 3mm MS flat-04 Nos per window. (b) Handle of Z section 20mm x 25mm, 100mm long-01 Nos per leaf. (c) Z Section stopper 20mm x 25mm, 100mm long-01 Nos per leaf. (d) Cleat 55mm long of hollow square 15mm x 12mm- 02 Nos per leaf. (e) MS pintol hinges size 75mm x 12mm -02 Nos per leaf. Note:- MS guard bars, sheet glass, and painting shall be measured and paid seperately.

All as per item no 38 but fixing with wire mesh.

S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified.

M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete fixed in repair all as specified and directed by Engineer-in-Charge.

S&F Sheet 3.0 mm thick frosted glass, squares nexc 0.5 sq. m each pane complete all as specified.

S&F Sheet glass 5.5mm , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified & directed by Engineer-in- charge.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge.

S&F in Aluminium handles, cast type, anodised 150mm long complete all as specified and directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed by Engineer-in-Charge.

S&F 150mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & directed by Engr-in-charge.

S&F Floor door stopper of aluminium alloy body and tongue, 140mm size ,anodised, with hard drawn steel spring complete all as specified and directed by Engineer-in-Charge.

S&F door closer aluminium (Die cast) body hydraulically regulated designation No. 2 universal type, suitable for door shutters of 36 to 60 Kg (Cast iron body) etc complete all as specified and directed.

M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Taking down eaves gutters and rain water pipes including all fittings and size and pattern complete all as specified & directed by Engineer-in- charge.

Supply & fixing 75mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints,laid in trenches or in floors complete all as specified & directed by Engineer-in- charge.

Supply & fixing 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints, jointed with solvent fixed to walls complete all as specified & directed by Engineer-in- charge.

Supply & fixing PVC (SWR) bend 75mm bore of any radius complete all as specified & directed by Engineer-in- charge.

Supply & fixing PVC (SWR) bend 110mm bore of any radius complete all as specified & directed by Engineer-in- charge.

M&L, 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement and fixed with cement concrete type B-1 (1:2:4) complete all as specified

S&F PVC 110mm P Trap complete all as specified and directed .

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified & directed by Engineer-in-charge.

M&L for Dubbing out in cement plaster (1:4) of average 10mm thick on irregular face of walls/chajja/facia complete all as specified & directed by Engineer-in-charge

M&L rendering 12mm thick on brick work or concrete surface in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge.

M&L rendering 15mm thick on brick work or concrete surface in cement mortar (1:4) and finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge

M&L rendering 5mm thick in cement mortar (1:3) on ceiling/ soffit of slabs finished even and smooth without using extra cement complete all as specified & directed by Engineer-in- charge.

M&L One coat of white wash on wall surfaces including preparation of Old plastered surfaces complete all as specified.

M&L preparing newly plastered or pointed surface of ceiling and applying two coats of white wash complete all as specified & directed by Engineer-in-charge.

M&L One coat of white wash on ceiling undecorated surfaces including prepration surface, plastered or un plastered of Old undecorated surfaces complete all as specified.

M&L prepration of newly plastered or pointed surface of walls and applying two coats of cement base paint complete all as specified & directed by Engineer-in- charge.

M&L one coat of cement base paint to old surfaces of walls including preparation of surface complete all as specified.

M&L on newly plastered surface of walls preparatory by applying 3 mm wall care putty for distempering and applied two coats of oil bound distemper of any colour as directed by Engineer in charge

M&L for complete removal of existing treatment and applying two coats of oil bound distemper on walls over 3mm thick wall care putty including preparation of surfaces of walls complete all as specified.

S&F in repairs vitreous china wash down water closet pedestal pattern pan white with trap including connection to existing out joint pipe, flushing pipe or Cistern, antisyphonage pipe, including making, etc complete including making goood to floor etc complete all as specified and as directed.

S&F in repair plastic water closet seat cover of White colour closed pattern with flat bottom and cover with mild steel chromium plated hinging device etc complete as specified and directed.

S & F in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe 1.25 metre long flexible tube and ABS wall hook including making connections and fixed to in position etc complete all as specified and directed.

S&F in repair PVC low level flushing cistern syphonic action type white with inlet ball valve, handle including brackets 10 ltrs capacity including flush pipe etc complete all as specified and directed .

S&F in repair vitreous china wash hand basin white flat, bracket size 580mm x 450mm, including waste coupling and waste pipe complete all as specified and directed .

S&F in repair stainless steel sinks 1mm thick sheet with over all size 495mm x 420mm and bowl size 410mmx330x160mm for kitchen or laboratory with plug washers and waste, including bedding in cement mortar on to dwarf walls or including fixing centilever bracket and connecting uinon to waste pipe, including waste couling and waste pipe complete all as specified.

S & F in repairs PVC connections 15mm size with PTMT nuts and bolts of length 450mm etc complete all as specified and directed.

S&F in repair pillar tap, cast copper alloy fency type chromium plated screwed down high, pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed to 15mm bore of pipeetc all as specified and directed.

S&F in repairs Bib taps, chromium plated cast copper alloy with crutch or butterfly handle fency type, screwed down , screwed for iron pipe or for brass ferrule and fixed in iron pipe of 15 mm complete all as specified and directed.

S&F in repair stop valves/angle valve 15mm bore , cast copper alloy fency type, chromium plated ,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed.

S&F in repair stop valves/angle valve 15mm bore , cast copper alloy fency type, chromium plated ,screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed concealed type etc complete all as specified and directed.

Dismantling water tanks exc 250 & nexc 500 ltr complete all as specified and directed.

Dismantling water tanks exc 500 & nexc 1000 ltr complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks triple layered of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position including nipple suitable for water tank complete all as specified.

S & F rotational moulded polyethylene water storage tanks triple layered of capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position including nipple suitable for water tank complete all as specified.

S&F stop valves 20mm bore cast copper alloy, screwed down, high pressure with crutch or butterfly handle etc complete fixed in repairs complete all as specified.

S & F in repairs ball valves high pressure of PTMT with epoxy coated aluminium rod and high- density plastic ball screwed for iron pipe fixed 20mm dia minimum weight 210 gms etc complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified.

All as per above item No 88 but 20mm bore complete all as specified.

S&F 15mm bore GI tubes, medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

All as per item No 90 above but 20mm bore.

S&F in repairs harrision rails, mild steel , chromium plated with fixing bracket, stops, rollers etc complete all as specified and directed.

M&L PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base, floors and pavings all as specified.

M&L Machine pressed precast concrete interlocking paver block with grey cement and pigment, any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade laid over and including 25mm thick sand layer, including necessary cutting and waste as per site requirement complete all as specified and directed by Engineer-in-Charge.

M&L chequered cement concrete tiles 30cm x30cm x 25 mm thick, set, jointed and pointed in neat cement slury with grey cement no pigment in floors and including 15 mm thick screed bed in cm (1:6) all as specified & directed.

M&L for providing, cement concrete, (Type B0, 1:2:4, 12.50 mm graded stone aggregate) along with interlocking/chequered tiles, rounded or chamfered on edges as directed complete all as specified and directed by Engineer-in-Charge.

M & L 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing surface even and fair without using extra cement all as specified and directed.

S&F in repairs brass chromium plated tubular towel rail, 20mm dia D-type, 60cm long between flange complete all as specified.

Taking down copper/aluminium point wiring (light, fan, socket or power, bell point ) complete, including fixture and fittings such as switches, bell push,ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit and making good disturbed surfaces of walls, floors, etc

M& L for concealed point wiring for one light point/bell point controlled by one switch complete with 1.5 sq mm FRLS PVC insulated multi-stranded copper conductor in and including 20mm dia heavy duty rigid PVC conduit (ISI marked) including fittings & accessories inlcuding suitable size module type boxes for housing of modular type switches/sockets etc including 1.5 sq mm FRLS PVC copper conductor multistranded as earth wire connected to the common earth dolly complete all as specified and as directed. Note:- Rates shall be included in quoted rate for Making good of disturbed surfaces of walls, floor,roof etc & match with existing surface by using putty and distemper, complete all as specified and as directed..

All as per ser item No 100 here-in-before but One celing fan /Exhaust fan point controlled by one 6 Amps one-way switch and regulator complete all as specified.

All as per ser item No 100 here-in-before but One 5 pin 6 Amps switch socket outlet point on independent board complete all as specified.

All as per ser item No 100 here-in-before but One 5 pin 6 Amps switch socket outlet point on same board complete all as specified.

All as per ser item No 100 here in before but 4 Sqmm copper conductor wiring with 4.0 Sqmm copper conductor as earth continuity for 15/16 Amps socket outlet on independent board complete all as specified.

Supply and fix switch modular type single pole one way 6 Amps complete all as specified and as directed.

Supply and fix switch modular type single pole one way 16 Amps complete all as specified and as directed

Supply and fix socket outlet 5 pin 6 Amp modular type complete all as specified and as directed

Supply and fix socket outlet 6A /16 Amp 6 pin suitable size complete all as specified and as directed

Supply and fixing of Ceiling rose, 3 terminal Polycarbonate isolated body complete all as specified and as directed

S&F white cover plate with frame ,1 module complete all as specified and as directed

S&F white cover plate with frame ,3 module complete all as specified and as directed

S&F white cover plate with frame ,4 module complete all as specified and as directed

S&F white cover plate with frame ,6 module complete all as specified and as directed

S&F white cover plate with frame ,8 module complete all as specified and as directed

M& L Wiring for circuit/submain wiring in PVC Conduit (ISI marked ) 2 x 10.0 Sqmm along with earth wire with 1x 10.0Sqmm as earth wire of FRLS PVC insulated multi-stranded copper conductor multistranded complete all as specified and directed.

M& L Wiring for circuit/submain wiring in PVC Conduit (ISI marked ) 2 x 6.0 Sqmm along with earth wire with 1x 6.0Sqmm as earth wire of FRLS PVC insulated multi-stranded copper conductor multistranded complete all as specified and directed.

M& L Wiring for circuit/submain wiring in PVC Conduit (ISI marked ) 2 x 4.0 Sqmm along with earth wire with 1x 4.0Sqmm as earth wire of FRLS PVC insulated multi-stranded copper conductor multistranded complete all as specified and directed.

M & l for Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm bore with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

Supply and fix LED tube light fittings 1200 mm, 20W, 240V, 50HZ,rated input current- 0.070-0.110, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.

Supply and fix LED tube light fittings 600 mm, 10W, 240V, 50Hz,rated input current- 0.070-0.110, higher energy saving decorative ultra slim square profile LED lighting fixture with extruded polycarbonate enviromental friendly, energy efficient complete all as specified and directed.

S&F building security light fitting LED TYPE 35 watt optic lenses with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 32 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed

S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SPN 12 ways, 240 Volts, ISI marked, enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB with connection testing and commissioning. complete all as specified and directed

Supply and fixing amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of SPN 40 A carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed including taking down existing.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 380 mm sweep with louver complete all as specified and as directed including taking down existing.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed including taking down existing. .

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed including taking down existing. Note :- Old items against srl item No 125 to 128 shall be deposited to MES yard and these items will not be part of credit to contractor .

S & F in repairs sheet metal enclosure for double door DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted VTP & N 4 ways, 415 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCCB and isolators etc including fixing in Wall with Cement mortar complete all as specified and directed

S & F isolator 63 Amps 415 V , 3 Phase 'C' series, 25KA , complete all as specified and directed.

M& L for Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp Single pole 240 V compelte all as specified.

Supply and fixing MCCB 125 Amp rating , 16 KA, 4 pole with sheet metal enclosure , complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor size 50 sq mm 3.5 core complet all as specified (excavation, earthwork , bricks, sand and pipe shall be measured and paid separately.

S&F GI tubing 40 mm bore 'light grade' galvanized, with all fittings jointed and laid in trenches/fix on wall floor, complete all as specified and as directed.

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for laying of pipes as in soft soil and getting out, complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil complete all as specified and directed.

Removal of excavated material to a distance not exc.50 m and depositing where directed at a level not exceeding 1.5 mtr above starting point complete all as specified and directed.

M & L for dry screened river bed sand cushioning 8cm before laying the cable and 15cm after laying the cable and further hand punned to form a uniform layer of 18 cm complete all as directed.

Supply and laying old size sub class 'B' bricks laid flat in trenches over the cable with length of brick perpendicular to the direction of cable , adjucent/abutting each other, complete all as specified and directed .

M&L for Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15 mm bore complete all as specified and directed.

Supply & fixing galvanised iron tubes of size 50mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc complete all as specified & directed

Supply & fixing galvanised iron tubes of size 20 mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed.

Supply & fixing galvanised iron tubes of size 25mm bore (medium grade) with all fittings and laid in trenches, under floor or road including fittings such as socket, bend, elbow, union etc. complete all as specified & directed

S & F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 20 mm bore including connecting materials complete all as specified and as directed.

S & F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 25 mm bore including connecting materials complete all as specified and as directed.

S & F Gun metal gate valve with iron wheel hand ,screwed both ends,complete for size 50 mm bore including connecting materials complete all as specified and as directed.

Material & labour brick masonry valve pit chamber with inner clear dimension 600 x 600 x 600 mm suitable for 50mm Gate Valves with PCC (1:4:8) 150mm thick type D2 for foundation, Brick masonary 230mm wall in CM (1:4), PCC (1:2:4) 75mm type B1 for coping, rendering in CM (1:4) 15mm thick including provisiion of 3 mm thick MS sheet cover and 25 x 25 x 3mm angle frame embeded in coping with two coats of synthetic enamel paint over a coat of red oxide primer with locking arrangements including necessary earth work complete all as specified and directed .

AGNIHOTRI CONSTRUCTIONS

JAI DURGA CONSTRUCTION COMPANY