PROVN OF TWO WHEELER PARKING FOR 60 X VEHICLES WITH COVERED STAND NEAR BLDG NO T 22 AT 62 MED REGT PROVN OF PERKING SHED NEAR OTM T 53 IN RESPECT OF SPORTS MEDICINE CENTRE AND PROVN OF 24 X AC AT MH UNDER GE ROORKEE

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L MS Roof trusses (framed), trussed, purlins, crane gantries, rails, post bolts and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, base plate,nut-bols for base plate etc. complete all as specified and directed.

M&L for cement concrete type B-2 1:2:4 (using 40 mm garded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M & L for preparation of new steel surfaces of any desc over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for hard core of broken stone or boulders of gauge n exc 63 mm , deposited , spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for 75 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded graded stone aggregate) as in sub base to floor complete all as specified and directed.

M & L for 75 mm thick cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate) as in floor finishing surface even and smooth using extra cement laid panels and joints filled with bitumen mastic complete all as specified and directed.

M&L for rendering 15mm thick consist of two coats top layer 5 mm thick in CM 1:4 over 10 mm th in CM 1:6, on fair faces of brick work ( WPC shall be measured & paid seperately) finished even & fair all as specified.

M&L Cement concrete 1:3:6 type C-2 (using 20mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified.

M&L for 60 mm thick Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment complete all as specified and directed (Make:-ECO/NITCO/NTC)

Supply and laying sand (25 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:6) on Brick surfaces, rendering is to be finished even and smooth (without using extra lime or cement) all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified

Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified.

Returning filling in including spreading, levelling watering and well ramming in layers not exceeding 25cm thick each layer complete all as specified and directed.

Removing excavated material soft / loose soil n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified.

M&L for hard core broken stone or boulder of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface compolete all as specified and directed

M& L for PCC 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in foundations, filling and mass-concrete complete all as specified.

M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, (using 40 mm graded stone aggregate) as in plinth protection incl finishing the surface even and smooth without using extra cement complete all as specified and directed.

S&F 20 mm bore galvanised steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors

S&F 15 mm bore galvanised steel tubing medium grade with all fittings and fixed complete to walls and ceiling or laid in floors

S&F solid PVC door frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. Frame for top and bottom rails . M.S. Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, and bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification & drawing

All as per item No 26.00 above but fully glazed i.e Glass panes used instead of 5mm PVC sheet panels as in ventilators, complete all as specified and directed

S&F for extruded aluminium handles fabricated type 150 mm all as specified & directed.

S&F for aluminium anodised barral tower bolt 200 mm long all as specified and directed

S&F for mild steel medium weight cold rolled butt hinges 100 mm long, all as specified & directed.

S&F for mild steel medium weight cold rolled butt hinges 75 mm long, all as specified & directed.

S&F for aluminium anodised barral tower bolt 125 mm long all as specified and directed

S&F for extruded aluminium handles fabricated type 125 mm all as specified & directed.

S&F 15mm bore concealed stop valve long shank and cup cast copper alloy chromiun plated fancy type screwed down high pressure with capstan handle long shank screwed both ends all as specified

S&Fstop valve 15mm cast copper alloy chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F CP brass shower rose 125mm size with shower arm suitable for 15mm bore pipe complete all as specified.

M&L PVC floor trap ,plain with grating including jointing to waste pipe with solvent cement dia of outlet 75mm in repairs complete all as specified and directed.

M&L PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) 75mm thick as as in floor and paving finished even and smooth with out using extra cement complete all as specified.

S&F brass chromium plated bib tap for iron pipe of 15mm bore fancy type with crutch or butterfly handle, screwed down high pressure complete all as specified.(Make : Prayag / Essco of Jaquar)

S&F for steel windows or ventilators fixed type with glazing bars complete all as specified and directed

M&L for jointfree glazed ceremic tiles in vertical surface 300x450 mm 6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for jointfree glazed ceremic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 complete all as specified and directed

M&L for joint free non skid coloured ceremic tiles 7 to 8 m thick (square/ rectangular) area of each tile exc 0.06 and not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints , laid in floors or in trenches or to walls complete all as specified and directed.

S&F PVC (SWR) bends of 110 mm bore of any radius complete all as specified and directed.

S&F for towel rail 600mm long 20mm dia aluminium anodised chromium plated fixed with wooden guities embeded in cement mortar 1:3 with steel screws etc, complete all as specified.

S&F gun metal globe gate valve with iron wheel head screwedof 20 mm bore both ends for iron pipe and fixed complete all as specified and directed.

S&F rortational moulded polythene water storage tanks 500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F 20 mm bore ball valve high pressure of PTMT epoxy coated aluminium rod and high density plastic ball screwed for iron pipe anf fixed complete.

M&L for preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair complete all as specified and directed.

M&L 2 coats of cement base paint on new surface of walls inlcuding preparation of surface and one coat of primer to surface all as specified and directed.

M& L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as as in floor, roof, shelves complete all as specified.

S&F mild steel TMT bars 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified.

Form work to sides and soffits of floor slab,roof, beams, lintel cantilever,shelves and similar work fair finished surface all as spd and directed

S&F vitreous china wash basin size 550x400mm excluding taps,waste, chain and plug incl bracket complete all as specified and directed.

S&F piller taps, cast copper alloy with capstan heads,chromium plated, screwed down high pressure with or with out letteered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed

S&F vitreous China urinals, bowl type(back or corner wall type), complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brackets,flush pipe grating and union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern trap and waste pipe

M&L Salt glazed stoneware gully traps,square or round mouthed type 'P' 150x150 mm incl bedding in 1:5:10 complete all as specified and directed.

M & L for Point wiring concealed with 1.5 Sqmm PVC insulated and PVC unsheathed FRLS, multi stranded, single core copper conductor cable drawn through and including PVC non metallic conduit of 20 mm or more dia, ISI marked with complete accessories, including sunk mild steel 1.6 mm thick terminal boxes with 3 mm thick bakelite sheet top cover ISI marked complete including one run of PVC insulated and unsheathed single core multistranded copper conductor cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth and earth dolly ,making good surface with white wash or any type distemper as per existing colour of building complete all as specified and directed for One light point / fan point controlled by one one way switch. Make of Cable- Havells /policab/Finolex, Make of PVC conduit -Plaza /Kalinga/Polycab

S&F switch piano type 5 Amp SP one way .Make: Anchor(Penta)

S&F ceiling rose surface bakelite 65x25mm 3 terminals complete all as specified and directed. Make: Anchor(Penta)/Havells

S&F Lamp Holder, PVC/Polycarbonate type insulated body with , back plate complete suitable for and including LED lamp of 15 watt complete all as specified and directed. Make: Anchor(Penta)/Havells

S&F SPN DB 4 way double door with 200 Amp bus bar 240 volt Make: Legrand, IP 43 Cat Pt No 507620 or equivalent in ABB/C&S

S&F MCB SP 6-32 Amps AC 230 Volts, 'C' curve series with 10 KA breaking cpacity Make: Legrand/ ABB/C&S

S&F MCB SPN 40 Amps AC 230 Volts, 'C' curve series with 10 KA breaking cpacity Make: Legrand/ABB /C&S

S&F in replacement of LED tube light fitting 1x20 Watt, white powder coated, CRCA box type, LED industrial batten with polycarbonate tube light 20 watt and making connections with the help of three core PVC insulated unsheathed copper conductor mulstistanded wire of suitable length complete all as spcified and directed . Make : C&S Cat Pt No LTIC00120WLED/WD (LTIC1X161820WLED + LT4F20WLEDT8/WDI) or equivalant in Philips / Bajaj

Supply and fix in replacement of LED Street Light Luminaire 25 Watt with pressure die cast housing along with prismatic polycarbonate diffuser and LEDs with secondary optics and IP65 protection including brackets made out of GI pipe light grade of suitable dia or as per manufaturere recommonded, bent to shape incl 02 Nos MS flat bent to shape incl 02 Nos MS flat clamps, nut bolts, termination with the help of 3 core 2.5 Sqmm PVC insulated,unsheathed copper conductor multistranded cable complete all as specified and directed. Make : Bajaj Cat No BCLST 25 W LEDIV2 or equivalant in Bajaj/ C&S

Supply, laying LT cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power couples (heavy duty) with aluminium conductor, 1100 volts grade cross 10 Sqmm 2 core complete all as specified and directed.

M&L earthing complete with galvanized steel plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia size by means of GI bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 20 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6) (chamber size not less than 300x300x300mm interier diamentions), type C-1 for chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified. NOTE: The unit rate includes earth strip and protection pipe upto (maximum 7.5 metre from earth plate) earth point/test point.

S& Laying or fixing on wall GI Pipe Medium grade of size 20 mm dia complete all as specified.

S&F GM Gate valve with iron wheel of size 20mm dia complete all as specified and directed.

S&F Exhaust fan 300 mm Sweep, 240volt, single phase including including making connection cutting holes of suitable dia for exhaust fan in any type of wall including finishing and making good as per existing surrounded wall and also including provision of wire mesh of sutable gauge and size on the outer side of wall fixing with the help of wooden batten to prevent entry of any foreign particales inside the fancomplete all as directed by Engineer - in -Charge. Make : Bajaj/Usha/ Crompton

Supply and fixing House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 900 bends. M.S.hook and stay or guy, iron clamps etc complete all as directed by Engineer-in-Charge

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor , multi stranded served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm dia suspension GI wire, one twin core cable flat or circular of size 6 Sqmm complete all as directed by Engineer-in-Charge.

S& lay in trenches sub class `B’ bricks having compressive strength 75 Kg/ Sqcm for cable protection etc compete all as specified and directed by Engineer-in-Charge.

Suppy and fixing Window type Air Conditioner, 2 Ton Capacity of Hot and Cold (all weather) electric driven single phase complete all as specified and directed. Including One year warranty of AC, and five year warrenty for compressor and revers valve. Note:- 1. The rate quoted shall deem to include the cost of cutting holes in the brick wall/window for installation of A/C and making good the surface to match with adjoining surfaces. Make :- Voltas model No 242DZC or equalent of Carrier/Hitachi/Voltas/Blue Star.

Supply and fixing of Voltage stabilizer for automatic operation , single phase naturally air cooled indoor type & designed for input variation between 130V to 280V with out put voltage between 200-240 V with low / high cut & TDR facility and of capacity 5.0 KVA Make: Luminous/Voltas/V-Guard .

Supply and fixing in Replacement single pole and neutral metal sheet enclosure with a two pin and earth plug and socket complete with one single pole MCB 240V 20 Amps. Make Indo Asian, C&S, legrand.

Material and labour for Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 4.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic conduit of 20mm/ approprite dia with accessories and fittings and one run of 2.5 sq mm single core multi stranded copper conductor cable as earth continuity conductor complete all as specified and directed. Note: Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20 mm or more approprite dia shall be measured as one run length of submain.

S & F Sub main wiring with two runs of single core FRLS PVC insulated and unsheathed multistranded, copper conductor cable of size 6.0 sqmm LT, 1100V grade, down trhough and incl adequate sizes PVC non metallic conduit of 20 mm/approprite dia with accessories and fittings and one run of 2.5 sq mm single core multi stranded copper conductor cable as earth continuity conductor. Note: Two runs of cable one run of earth wire and one run of PVC non metallic conduit of 20 mm or more approprite dia shall be measured as one run length of submain.

S&F SPN DB 12 way double door flush to wall complete all as specified and directed. Make: Legrand, IP 43 Cat Pt No 507621

S&F in SPN DB 8 way double door flush to wall complete all as specified and directed. Make: Legrand/Indo Asian, IP 43 Cat Pt No 507621

S&F in MCB SPN 63 Amps AC 230 Volts, 'C' curve series with 10 KA breaking cpacity including necessary lugs/ thimbles complete all as specified and directed. Make : Legrand/Indo Asian

S&F in MCB SPN 20 Amps AC 230 Volts, 'C' curve series with 10 KA breaking cpacity including necessary lugs/ thimbles complete all as specified and directed. Make : Legrand/Indo Asian

Bhardwaj Construction Co

VERDHMAN ASSOCIATES