Loading…
Loading…
Tender ID
Tender Value
₹1.5 Cr
EMD Value
₹1.5 L
Closing Date
16 Mar 2026, 12:00 pmClosed
Executive Engineer, Electrical (R&B) Division, surat
A & A to Street lights of Unai-Buhari Madhi Mandavi Road, Di-Tapi (102/2 to 128/0)
279929
Online Notice No 29 of 2025-26
Open
Electrical Works
Works
Surat
11 documents required · 11 mandatory
₹3,600
Yes
Executive Engineer Electrical (R&B) Division, Surat
₹1.5 L
Yes
23 Feb 2026
23 Feb 2026
23 Feb 2026
16 Mar 2026
23 Feb 2026
Name of work : A & A to Street lights of Unai-Buhari Madhi Mandavi Road,Di-Tapi (102/2 to 128/0)
DESCRIPTION TENDER RATE
Qnty. Unit Rate in Per Amount
No Rate in Words
1-a 165 Mtr. Providing and erecting Mains with ISI marked, 1.5KV grade 56.56 Rupees Fifty Six Mtr.
electrolyte multi stranded, annealed copper conductor with heat And Paise Fifty
resistant PVC insulated conforms to IS 694, IEC - 227 erected in Six Only
existing pipe of following size (Specifically for control panel,
relays, power switchgears, motor starters & control wiring) with
required size of copper lugs, nuts and bolts if required. (e) One
wire 6.00 sq. mm
1-b 55 Mtr. (g) One wire 16.00 sq. mm 142.41 Rupees One Mtr.
2 8478 Mtr. Supplying and erecting Flexible PVC insulated multistrand 46.46 Rupees Forty Six Mtr.
multicore 1.1 kv grade ISI marked copper wires of following size And Paise Forty
to be erected as directed. e) 1.50 Sq.mm 3 core round PVC Six Only
3 942 Nos Supplying and erecting LED street light / Flood light fittings with 6566.01 Rupees Six Nos
High power White LEDs wattage of 3 Watt and above assembled Thousand Five
on single MCPCB, efficiency more than 130 lm/w and corrosion Hundred Sixty
free High pressure die cast aluminum housing with smooth Six And Paise
finish powder coated and heat sink extruded aluminium with One Only
diffuser and Polycarbonate optics/ lenses, with toughened glass
with company mark/name engraved or embossed 160 to
V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to
5700K,Uniformity ratio >0.45, Luminaire efficacy>
lumens/watt . LED driver efficiency > 85 %.( fittings required
LM-79 & LM-80 certificates)(NOTE: Below description have
shown ranges of Wattage capacity of LED fittings.The Engineer
incharge may select any wattage capacity between the ranges
shown.)(A) Street Light (IP-65), Surge protection -4KV integral
and ,Light must have 440VAC line supply with over-voltage
protection. (g) 110 to 120 watts, Cat III
4 11 Nos. Providing & erecting Approved make Four pole moulded case 6173.12 Rupees Six Ea.
circuit breaker having breaking capacity ICU of 25 KA. at 415 Thousand One
V,having normal current rating up to 25 A to 100A. with Fixed Hundred Seventy
thermal & magnetic release suitable to work on A.C. supply 50 Three And Paise
c/s. with all internal connections & complete erected in existing Twelve Only
16 G.M.S. housing. ICS=100% of ICU only Cat III
5 11 Nos. Providing & erecting Approved make Earth fault Relay suitable 4687.41 Rupees Four Ea.
to mount with inter connection to moulded case circuit breaker Thousand Six
having CT ratio & MCCB rating as following along with shunt Hundred Eighty
trip 220V AC. with all internal connections & complete erected in Seven And Paise
existing M.S.housing.. (1) 15 A -100 A , CT Ratio 1/100 Forty One Only
6 6 Rn.M Supplying and erecting triple pole & neutral 440V / 500V panel 1961.42 Rupees One Rn.Mt
tr mounting Copper Busbars with four equal Nos. of electrolyte bus Thousand Nine r
having current density not more than 1.6 Amp. / sq.mm (Rated Hundred Sixty
current / cross section area) duly wrapped with colour One And Paise
insulating tape for phase sequence of following current carrying Forty Two Only
capacity, erected with necessary bus bar supports /insulators,
main cable socket to each bar, erected in existing cubical panel
with necessary connections. (A) Suitable for 100 Amp. Capacity
7 942 Nos. Providing and erecting Miniature circuit breaker single pole 270.68 Rupees Two Ea.
0.5A to 2A system and having breaking capacity 10 KA to be Hundred Seventy
erected in existing box. confirming to IS 8828/1996 with ISI And Paise Sixty
Mark. Cat.III Eight Only
8 23 Nos. Providing & erecting 415 V MCB Four Pole for Motor & 668.62 Rupees Six Ea.
Inductive Load (C Curve) having 10KA breaking capacity & Hundred Sixty
confirms to IS :8828 in existing box having following capacity Eight And Paise
(b)40 Amp., Cat.III Sixty Two Only
9 275 Kg. Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 794.87 Rupees Seven Kg.
10 446 Nos. Pipe type earthing having 150 cms.long and 2.5 cms. dia. 368.65 Rupees Three Ea.
galvanised iron pipe with coupling and buch buried in specially Hundred Sixty
prepared earth pit complete with necessary 8 SWG earth wire. Eight And Paise
Sixty Five Only
11 446 Nos. For using salt and charcoal / coke as required for pipe type 171.70 Rupees One Ea.
earthing. Hundred Seventy
12 22 Nos. Supplying & erecting earth pit of minimum bore dia.150mm size 4591.46 Rupees Four Ea.
approved make Earthing Electrode consisting Pipe-in-Pipe Thousand Five
Technology as per IS 3043-1987 made of corrosion free G.I.Pipes Hundred Ninety
having Outer pipe dia of 50mm having 80-200 Micron One And Paise
galvanising, Inner pipe dia of 25 mm having 200-250 Micron Forty Six Only
galvanising, connection terminal dia of 12mm with constant
ohmic value surrounded by highly conductive compound with
high charge dissipation suitable for following type of
applications. (a) For Electrical Installation up to 440V in normal
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg
13 11 Sq.M Providing & erecting weather proof, dust & vermin proof, floor 10468.65 Rupees Ten Sq.Mtr
tr mounted front operated indoor type cubical panel board Thousand Four
necessary IP-42 protection & above as per requirement made Hundred Sixty
from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 Eight And Paise
SWG thick CRC M.S.sheet for internal partitions with necessary Sixty Five Only
supporting angles, flats including cutting, bending, drilling,
welding, riveting with internal partitions & cable alley as per
requirements & instruction of engineer-in-charge with erection
of supplied switch gears, BUSBARS, with suitable size of inter
connecting PVC copper wire / copper-aluminium strips, rubber
grommets, rib, bakelite control fuses for measuring instruments,
earth bus & earth bolts, foundation flange - bolts-base Plates,
sufficient nos. of hinged doors, handles with locking
arrangement and rubber gasket,heavy duty end terminal
connection complete. The Panel shall be painted with epoxy
powder coating. (The rates excludes the cost of switchgears, bus
bars, inter connecting mains & Copper Aluminium strips,
meters, Fuses etc. The dimension shall be measured excluding
base beams) The panel shall be supplied with following
approved manufacturers with following size. (A) locally
fabricated panel board (i) with 350mm depth
14 275 Kg. Providing , erecting , fabricating the M.S. structure as per 77.77 Rupees Seventy Kg.
requirement on site incorporating proper size of M.S. angles, Seven And Paise
flats, bars, channels, sections complete with cutting, welding, Seventy Seven
grinding & finishing duly painted with one coat of red oxide Only
with erection on site as per direction of engineer in charge with
necessary grouting, cementing, plastering & finishing complete.
15 12557 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 140.39 Rupees One Mtr.
multistrand / Solid Aluminium conductor for 1.1 KV. to be laid Hundred Forty
on wall with necessary clamps or in existing trench / pipe of And Paise Thirty
following size of cables. (c ) 4 core 10 Sq. mm. Nine Only
16 650 Mtr. Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable 153.52 Rupees One Mtr.
multistrand Aluminium conductor for 1.1 KV. to be laid on wall Hundred Fifty
with necessary clamps or in existing trench / pipe of following Three And Paise
size of cables. (a) 4 core 16 Sq. mm. Fifty Two Only
17 11929 Mtr. Making trench in Hard Murrum / Tar Road of suitable width of 74.74 Rupees Seventy Mtr.
90 cm or required depth for laying any size of cable or locating Four And Paise
the fault all over the run and back filling the same and making Seventy Four
the surface as normal ground. Only
18 11929 Mtr. Providing & laying approved make Double walled corrugated 62.62 Rupees Sixty Mtr.
pipes (DWC) of polyethylene(conforming to IS 14930 II )with Two And Paise
necessary connecting accessories of same material at required Sixty Two Only
depth in existing trench for laying of cable. below ground /
road surface for enclosing cable. (A)50 mm outer dia.
19-a 712 Nos. Providing and, fixing heavy duty flange type brass cable gland 38.38 Rupees Thirty Ea.
with rubber ring for PVC insulated armoured cable complete Eight And Paise
with out going tails, insulating tape etc for following size of Thirty Eight Only
cables. (c) 2 to 4 core 10 Sq. mm.
19-b 44 Nos (e) 2 to 4 core 16 Sq. mm. 47.47 Rupees Forty Ea
Seven And Paise
Forty Seven Only
20-a 2848 Nos Solderless crimping type Aluminium lugs conforming to IS 13.13 Rupees Thirteen Ea
suitable for cable of following size evenly crimped with high And Paise
pressure tool & connected to switchgear terminals with Thirteen Only
brass/cadmium plated nut bolts in an approved manner. (B)
20-b 176 Nos (C) 16 Sq.mm. 15.15 Rupees Fifteen Ea
And Paise Fifteen
21 135 Nos Supplying and erecting approved make Octagonal pole made 14010.72 Rupees Fourteen Ea.
from HR sheet steel. The pole should be made as per IS. and shall Thousand Ten
be coated with hot dip galvanizing as per IS 2629/2633/4759, And Paise
suitable suspend local wind speed with integral Junction box Seventy Two
consist of terminal plate of min 6mm Hylam sheet, standard Only
profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type
terminal and arrangement for cable termination to be erected
on foundation (including) as per details given by manufacturer
considering site requirement. (G) 8 Mtr. Long 70 mm Top X
mm bottom dia, 3 mm thickness with 260mmX260mmX16mm
base plate, 4-M20 Bolts and 600mm long with necessary G.I. J
Bolts Approx Pole weight 84 kg
22-a 90 Nos Providing and erecting Street Light pole bracket comprising 683.77 Rupees Six Ea.
main B Class GI pipe of 4.2 cm/require outside dia. complete Hundred Eighty
with suitable B Class G.I. sleeve tubing of approx. 45cms.length Three And Paise
and suitable for 76.5 mm /80mm / required size of pole top Seventy Seven
having sufficient fasteners for fixing the brackets and having Only
spread of 1.5.mtr. length with 110 deg.with vertical plane &
suitable welded stays, reducer and with check nuts complete
painted with one coat of Red oxide / PU base primer and two
coats of Aluminium / PU paint. paint with following nos of arms.
[A] Single Arm Bracket 1.5 Mtr
22-b 360 Nos. [B] Double Arm Bracket 1.5 Mtr 1002.93 Rupees One Ea.
And Paise Ninety
22-c 32 Nos [C] Three Arm Bracket 1.5 Mtr 1331.18 Rupees One Ea
22-d 9 Nos [D] Four Arm Bracket 1.5 Mtr 1658.42 Rupees One Ea
Eight And Paise
23 275 Mtr. Supplying and erecting B class Galvanized iron pipe having 249.47 Rupees Two Mtr.
smooth finished bore of the pipe on both ends erected nuts and Hundred Forty
bolts along the pole / wall shaping the pipe as per site Nine And Paise
requirement. Pipe dia as following. (c ) 40 mm dia. Forty Seven Only
24 22 Nos. Supplying & erecting approved make Digital time switch having 3168.37 Rupees Three Ea.
lithium cell 6 years operative and operate battery backup 1 Thousand One
channel day clock with 14 memory programme, suitable to Hundred Sixty
operate on 240V + 5%, 16A with, floating contacts Minimum Eight And Paise
switching setup time 1 minimum & LCD display. Also comprised Thirty Seven
permanent ON/OFF switching. Programming switches & housed Only
in fire proof thermoplastic enclosure & transparent cover
erected as required with necessary connection erected as
25 22 Nos. Supplying & erecting power contactor for time switch complete 2782.55 Rupees Two Ea.
erected as per direction Cat III [D] 4 pole 440V 40 Amp. Thousand Seven
Fifty Five Only
26 33 Nos. Supplying and erecting approved make suitable panel indicator 43.43 Rupees Forty Ea.
lamps of LED type lamp, lens cover, Bakelite holder complete Three And Paise
erected with necessary connections. Forty Three Only
27 650 Mtr. Drilling the road without breaking the road surface (Asphalt) for 492.88 Rupees Four Mtr.
laying of cable for feeding power supply by making up to Hundred Ninety
following size of holes at both ends complete. (A) Up to 100 mm Two And Paise
bore dia Eighty Eight Only
28 650 Mtr Providing & laying approved make ISI marked HDPE 6Kg / cm2 732.25 Rupees Seven Mtr.
(Class-3) as per IS:4984:1995 PE-80 to be erected at road Hundred Thirty
crossing on or floor as directed for laying of cable. The pipes as Two And Paise
following size of dia & weight per 6 mtr.(F) 110 mm inner Dia. Twenty Five
Deputy Executive Engineer Executive Engineer
Electrical R & B sub-Division Electrical R & B Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Schedule B.pdf
Prequalification Criteria.pdf
Special Condition.pdf
Make List.pdf
Online Tender Notice No 29 of 2025-26.pdf
FINAL _ SBD (Electrical Work) _ 2024 Tender Booklet.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .