REPLACEMENT OF OLD HT PILC CABLE WITH XLPE CABLE FROM SS-6 TO C1 SUB STATION INSIDE FACTORY AT AFK

Amount

Excavation in trenches n.exc 1.5m wide and n exc 1.5 m in depth for underground cable/foundation etc. and getting out in Hard / dense soil.

Excavation in trenches n.exc 1.5m wide and n exc 1.5 m in depth for underground cable/foundation etc. and getting out in soft / disintegrated rock.

Excavation in trenches n.exc 1.5m wide and n exc 1.5 m in depth for underground cable/foundation etc. and getting out in hard rock. (Hard Rock Blasting Prohibited) contactor may use breakers for execution of work.

M & L Sand filling under floors or in foundations including watering and consolidation or trench for cushioning of the underground cable.

Supply and laying of HT, XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty ) with aluminium conductor, 11000 Volts, 3-Core, Cross sectional area of 185 Sq.mm as per IS: 7089 ( Part-2) 1985. Make:- CCI, Polycab, KEI, Havells only .

Supply and fixing cable jointing kit for 11KV grade cable for indoor termination HT, heat shrinkable type, complete with jointing material and accessories suitable for 3-core, XLPE, armoured, aluminium conductor cable of size 185 Sq. mm. Make-Raychem, Mahindra only.

Supply and laying of galvanized steel tubes, medium grade, 150 mm bore of pipe, include for one plain socket to each length of pipe. Make:- Tata, JSPL only.

Supply and laying of un-reinforced precast concrete cable cover class HV, Type-1, flat, size 300mm X 180mm X 40mm.

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm above ground level in hard / dense soil.

Matrial & Labour cement conccrete in mass concrete ( Type C2 1:3:6 40mm graded aggregate) (For PCC)

Matrial & Labour Laying of Screen bed or bedding layer of mortar 15 mm thick 1:6 for laying floor finishes (for refixing of Paving Block).

Fixing only of Machine pressed precast concrete interlocking paver block, any shape and size confirming to IS:15658-2006 of 60 mm thickness. M-35 grade except tiles.

Removing of excavated material (soil) exc. 1.5 KM but n. exc. 5 KM and depositing where directing where directed.

Supply and fixing of Rolled mild steel angle fixed independently, without connecting plates, etc. of size 25x25x5 mm, including GI nut bolts and washers. Fe 410-W (Gde-E-250) Quality- A, (for fixing HT Route Marker.)

Supply and fixing of HT MS Cable Root Marker of size 4 inch diaeter, minimum 6mm thickness, embarrassed with HT cable of 2 Nos of Holes align vertically. with Ms angle 500 mm long grouted stand duly coated with red oxide & then black painted.

ELECTRICALS C E A C