SPECIAL REPAIR RESTORATION OF FLOOD DAMAGED ROADS AT SEC B (HARNI AREA) EME SCHOOL AND SPECIAL REPAIR OF ROAD FROM GOLDEN JUBILEE CIRCLE TO P-228 AND A STRETCH NEAR JEET DWAR AT EME SCHOOL VADODARA

Amount

Material and Labour for repairs to pot holes not exc 1 Sqm each, incl sweeping free from dust and mud or water scoring sunken surfaces in roads,path etc. cutting around edges to at least 25 mm in depth, making good by filling in screened and graded road metal, watering and well ramming the surface complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces exceeding 50mm deep and not exc. 100 mm deep area not excceding 400 Sqm all as specified and directed.

Material and Labour for soling (or sub grade) 150mm thick spread thickness with broken boulders or quarried stone 63mm nominal size, interstices filled, surface formed and rolled and consolidated with 8 to 12 tonne power to required gradient and camber complete all as specified and directed.

Material and Labour for Laying and compacting 150mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MaRTH specifications for Road and Bridge all as specified and as directed

Material and labour for n exc 75mm thick bituminous, macadam laid/rolled and compacted to by using 8 to 10 tonne power road roller to required camber and gradient required gradient and camber(Consolidated thickness 75mm or less) using Hot mix plant & Mechanical paver with @4.50% (paving bitumen (VG-30) grade) binder content by weight of total mix , rolled and compacted by using 8 to 10 tonne power road roller to required camber and gradient complete all as specified and directed .

Material and Labour for preparing existing unsurfaced WMM/WBM surfaces by brushing with wire brushes for removing cacked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with paving bituminous primer at 80/100(VG-10) grade at 7.5 Kg per 10 Sqm for below BM surfaces complete all as specified and directed.

Material and Labour for preparing the black top bituminous surface by brushing with wire brushes for removing cracked mud, sweeping with brooms and finally fanning the cleaned surfaces with air compressor to remove all loose dirt and applying evenly a priming tack coat with bituminous primer @ 2.50 Kg / 10 Sqm of surface using paving bitumen complete all as specified and directed.

Material and Labour for laying and consolidating bituminous premixed ashphaltic semi-dense concrete 30 mm consolidtaed thickness with 5.5% binder content by weight of total mix by using paving bitumen (VG-30 Grade) any penetration rolled and compacted to required cambder and gradient etc. with mechanical paver and rolled with 8 to 12 Tonne power roller and complete all as specified and directed.

Material and Labour for Marking strips, straight lines, zebra crossing and straight lines not less than 2 to 2.5 mm thick and exc 10 cm width with hot applied thermoplastic road marking paint of approved brand (White or yellow) by using automatic mechanical road painting machine with 8% glass beads (intermixed) all as specified and as directed by Engineer In Charge.

Supply and Fixing metal tubular delineator DA-74 or equivalent ( including dismantling of old delineator),made out of 45mm dia MS pipe of 600mm total height duly powerded coated and made of top quality and durable glass refelactor made of top quality weather resistance plastic material (thermo plastic polyster clastomer) 3 bands of green/red/yellow reflactor of size 25mm wide strips embeded in PCC (1:2:4) 150mmX150mmX300mm size.

Supply and Fixing cat eye ( including dismantling of old cat eye), solar reflective type of metal body alloy of size 100mmX100mmX20mm with PAMA strip lens reflector of Model No DA 972 O od make Dark Eye or Equivalent of 3M fixed with and incl MS stud of suitable size as per manufactures instructions.

Material and Labour for 75mm thick spread thickness moorum red bajri filling as in berm including rolling etc as directed.

Supply and fixing in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) (including dismantling of old delineator) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V/ 0.3 watt one NI-ed rechargeable battery (1.2 V/ 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions complete all as specified and as directed.

Choudhary Traders and Engineers (BID ID -3249727)

Shree Vaishno Enterprises (BID ID -3251452)