MATERIALS SUPPLY FOR PLACHIKADU ANGANWADI CONSTRUCTION

Amount

Supplying variuos materials

Stone Aggregate(single size) : 40mm nominal size

Stone Aggregate(single size) : 20mm nominal size

Coarse sand (Zone lll)

Portland cement

Hire charges of concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type40mm)

Stone for masonry work

Wall form panel 1250x500mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (Bridge clip)

Single clip

M.S tube 40 mm dia

Stone Aggregate (Single size): 10 mm nominal size

Solid blocks of size 30x20x20cm

Solid blocks of size 40x20x15cm

Structural steel such as tees, angles, channels and R.S joists

Red oxide Zinc chromate primer

Adjustable telescope prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Second class kail wood in planks

Second class kail wood in scantling

Hollock ballies 125mm diameter

Safeda ballies 125mm diameter

Adjustable span ESO+ SI (2.35-3.4)

Twisted steel/deformed bars

Fine sand (zone IV)

Vitrified floor tile 60x60 cm

Ceramic Glazed Tiles 1st Quality 300x300 mm in all shades and designs of white ,lvory ,grey,Fume Red brown etc…

Ceramic Glazed Tiles 1st Quality minimum thickness 5 mm in all colours shades and designs except burgundy ,bottle green black

Mild steel tubes electrc resistant or induction buit welded

Mild steel round bar 12 mm dia and below

Flats up to 10 mm in thickness

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Factory made glass reinforced plastic door frame 90x45 mm i/c carrige

30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage

Powder coated M.S butt hinges 100 mm x58 mmx1.9 mm

Bright finished or black enameled mild steel screws40mm

Bright finished or black enameled mild steel screws 20 mm

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm

Welding by eletric plant

Mild steel plates

G.I pipes 40 mm dia

Mild steel round bar above 12 mm dia

Stainless steel (Grade -304)hollow section round /square tubes

Stainless steel bolts /square bar and plates

Multi surface paint

Special primer (C.W)

Synthetic enamel paint in black or chocolate shade

Black plastic seat (solid) with lid C.P brass hinges and rubber buffers

Vitreous china pedestral type wate closet

Flushing Cistern P.VC 10lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous china flat back wash basin 630x450 mm

15 mm C.P brass tap

C.P brass waste 32 mm

C.I bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings

Polyethylene water storage tank with cover and suitable locking arrangement

PVC pipe 15 mm outer dia 10kgf/cm2

PVC pipe 20 mm outer dia 10kgf/cm3

PVC pipe 32 mm outer dia 10kgf/cm4

PVC pipe 40 mm outer dia 10kgf/cm5

PVC pipe 63 mm outer dia 6kgf/cm6

PVC pipe 110 mm outer dia 6kgf/cm7

C Jayanarayanan