Aluva LAC Budget work 2016-17 Resurfacing with BM BC and construction of box culvert in Kuttamassery Chunangamveli road ch 0.000 to 4.000 Balance Work retender

Amount

Resurfacing

Excavation for Structure :- Ordinary Soil - Mechanical Means - Depth upto 3mEarth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressingof sides and bottom and backfilling with approved material. (vide TS estimate item No. 2)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications :- RCC Grade M20 - Using Concrete Mixer (without formwork) (vide TS estimate item No.8)

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications :- RCC Grade M20 - Using Concrete Mixer (vide TS estimate item No.9)

Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications(vide TS estimate item No.10)

Wet Mix MacadamProviding, laying, spreading and compacting graded stone aggregate to wet mix macadam specificationincluding premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.etc complete (vide TS estimate item No. 12)

MORTH Specification clause 503 Tack Coat Providing and applying tack coat with bitumen emulsion (RS) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom> (vide TS estimate item No.18)

Bituminous Macadam :- For Grading II (19 mm nominal size)<br>Providing and laying bituminous macadam with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder(VG 30), transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (vide TS estimate item No. 19)

Bituminous Concrete :- Grading - II (13.2 mm Nominal Size)<br>Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (NRMB) @ 5.2 to 5.6 per cent of mix and filler , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects(vide TS estimate item No. 20)

od29839/2016_2017 Bituminous Concrete :- Grading - II (13.2 mm Nominal Size)&lt;br&gt;Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder (NRMB) @ 5.2 to 5.6 per cent of mix and filler using with 7 % shredded plastic , transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects (vide TS estimate item No. 21)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface<br>Providing and laying retroreflective hot applied thermoplastic compound 2.5 mm thick applied with thermoplastic paint applicator machine including spraying additional glass beads type 2 @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads, all as per clause803.4 and IRC 35.The finished surface to be level, uniform and free from streaks and holes. (vide TS estimate item No. 22)

Painting Two Coats on New Concrete Surfaces , Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces (vide TS estimate item No. 24)

DINU K CHANDRAN

Bidder Name

P A SAJEEV

DINU K CHANDRAN