E.T.No.-EDC(USN)41/2025-26

Amount

Annexure-A (LABOUR CHARGES)

Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and connecting the earth electrod with the help of G.I. wire as per construction manual.

Fabrication of MS Channel angle iron etc in required sizes with drilling of holes upto good finish for top channel ,bracing and spec ial type bracket etc. as per RESPO schedule and local approced drawing.

Construction of Metering room for Metering Cubical at S/s end Including cost of building / material and it also include the cost of gate etc. of 10 feet height.

Excavation of earth for stay pit of size 0.6x0.6x1.2 mtr in all types of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in LT line

Fixing, tightening and nozzling of stay with pole and stay rod on required tension as per drawing/manual in 11 KV Line

Grouting of Stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block includ ing cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO Manual.

Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all types of soil including prop er dressing of sides and ramming of bottom including etting out the excavated soil and disposal of surplus excavated soil as directed complete work.

Erection of PCC single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual

Erection of SP-23 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual

Erection of SP-33 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual

Erection of SP-55 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual

Erection of SP-72 single support pole in proper level and alignment along with fixing of all accessories like top channel,& clamps as per RESPO manual

Erection of PCC double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual

Erection of SP-23 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual

Erection of SP-33 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings& clamps as per RESPO manual

Erection of SP-55 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual

Erection of SP-72 double support pole in proper level and alignment along with fixing of all accessories like top channel, X bracings & clamps as per RESPO manual

Muffing of poles size 0.45x0.60 cm radius with 1:3:6(1 cement:3 coarse sand :graded stone 10 mm nominal size) block size 45 cm height from ground level including cost of cement,stone and sand etc.

Dismantling of Transformers from double pole /plinth including opening of all connections, circuts & earthing strip etc. (25 KVA)

Dismantling of Transformers from double pole /plinth including opening of all connections, circuts & earthing strip etc. (63 KVA)

Dismantling of Transformers from double pole /plinth including opening of all connections, circuts & earthing strip etc. (100 KVA)

Installation of 33/11 KV Metering cubical in the Metering room with grouting and making all connection.

Loading, unloading & carriage of LT PRMC from Store to pit site & Installation on the double pole with the help of Nut Bolt & Clamp and making to pass LT cable from T/F to PRMC.

Installation / mounting of new 100 KVA Tranformer on pole structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its complete commissioning.

Installation / mounting of new 63 KVA Tranformer on pole structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its complete commissioning.

Installation / mounting of new 25 KVA Tranformer on pole structure and fixing of channel / angle etc. and making all connections of Ht and LT side and its complete commissioning.

Mounting & Fixing of Fuse sets on double pole structures including making of connections complete work

Fixing of triangular type bracket on 11 KV line

Laying, Spreading, Stringing and sagging of 11 KV / 33 KV line in 3 phase (3 Phase 3 wire) of ACSR Weasel as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart.

Laying, Spreading, Stringing and sagging of 11 KV / 33 KV line in 3 phase (3 Phase 3 wire) of ACSR Rabbit as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and profile and sagging chart.

Laying, Spreading, Stringing and sagging of 11 KV / 33 KV line in 3 phase (3 Phase 3 wire) of ACSR Dog as phase wire with G.I. earth wire complete including fixing of all accessories in 3 Nos. conductor in parallel with binding and jumpering as per profile and pro file and sagging chart.

Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(3 phase 4 wire) with G.I. earth wire complete wi th binding and jumpering as per RESSPO Specn

Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(2 phase 3 wire) with G.I. earth wire complete wi th binding and jumpering as per RESSPO Specn

Laying, Spreading, Stringing and sagging of L.T. Lines of ACSR Weasel as phase wire(1 phase 2 wire) with G.I. earth wire complete wi th binding and jumpering as per RESSPO Specn

Guarding of LT/11 KV Line over (Telephone / Road / L.T. line crossing as per drawing with 6/8 SWG G.I. wire including fixing of guarding channel/ angle as per RESSPO manual.

Route cleareance by cutting of tree branches / proning, loping and chopping of trees for L.T., 11 & 33 KV line.

T-off Connection Complete 11 KV line

Making of section pole for existing LT/HT/33KV line complete in all respect.

Jointing and fixing of cable jointing kit indoor/outdoor 11 KV XLPE heat shrinkable cable boxes

Cartage of PCC Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21- 50 Km)

Cartage of ST pole SP-21/23 Poles from store centre to construction site with loading, unloading at both points and proper stacking. (Distance 21-50 Km)

Cartage of ST pole SP-33 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of ST pole SP-55 Poles from store centre to construction site with loading, unloading at both points and proper stacking.(Distance 21-50 Km)

Cartage of ST pole SP-72 Poles from store centre to construction site with loading, unloading at both points and proper stacking. (Distance 21-50 Km)

Cartage of other material (other than poles) by vehicle from Store Center to nearest construction site Store including loading and unloading at both ends (distance 21-50 Km)

Cartage of the 16/25 KVA transformer from store center to construction site with loading and unloading at both points. (Distance 21-50 Km)

Cartage of the 63 KVA transformer from store center to construction site with loading and unloading at both points. (Distance 21-50 K m)

Cartage of the 100 KVA transformer from store center to construction site with loading and unloading at both points. (Distance 21-50 Km)

Cartage of the 33 KV VCB,feeder panels(O/D),T/F Control panel from store center to construction site with loading and unloading at both points. (Distance 21-50 Km)

Headload cartage of PCC Pole from road to site (distance 0-1 Km)

Headload cartage of SP-21/23 Pole from road to site (distance 1-3 Km)

Headload cartage of SP-33 Pole from road to site (distance 0-1 Km)

Headload cartage of SP-55 Pole from road to site (distance 0-1 Km)

Headload cartage of SP-72 Pole from road to site (distance 0-1 Km)

Head load cartage of small material(distance 0-1 Km)

Headload cartage of 63 KVA transformer from road to site(distance 0-1 Km)

Headload cartage of 100 KVA transformer from road to site(distance 0-1 Km)

Mannual shifting /Pulling of Control Relay Panel for Single T/F / Single Feeder from existing site to plinth/ nearby place distance upto 200 mtrs.

Erection of 11 KV VCB ( O/G or B/C or I/C ) Panel in all respect, making connection, testing etc in all respect at erection site

DIGGING OF PIT FOR MAKING TRENCH 0.6X0.15X1.5 MTR FT DEPTH, INCLUDING BRICK AND SAND WORK INCLUDING BACK FILLING AS PER RESPO

Laying Sagging of LT XLPE AB CABLE 3X70+1X50 SQMM

Laying Sagging of LT XLPE AB CABLE 3X120+1X95+1X16 Sq.mm

Laying Sagging of LT XLPE AB CABLE 3X25+25 Sq.mm

Digging of Pit through Hammer at CC, DAMAR Road

Laying,Sagging & binding of AB cable of size 120 sqmm.(Only for cable,additional provisions to be made for matching accessories installation, case of any network modification i.e additionalpole etc. and for actual connection,disonnection as per site condition.

Laying ACSR Weasel Conductor for providing Neutral conductor on L.T. Line.

Laying G.S. Earth wire 7/16 SWG for providing Earth Wire on 11 KV Line.

Cartage OF 11 KV VCB I/C.

Laying of 11 KV Cable as per Direction of Engineer in Charge.

Annexure-B (SUPPLY ITEMS) (As per UPCL Specifications)

Supply of MS Nut & Bolt off size

Supply of F CLAMP

Supply of X-ARM CLAMP FOR PCC POLE WITH N/B

Supply of X-ARM CLAMP FOR ST POLE SP-55 WITH N/B

Supply of E-Clamp for SP-33

Supply of LT CLAMP FOR PCC POLE WITH N&B

Supply of LT CLAMP WITH N&B ST POLE SP-55

Supply of STAY CLAMP FOR ST POLE WITH NUT BOLT

Supply of DOUBLE POLE CLAMPS WITH N/B FOR PCC POLE

Supply of DOUBLE POLE CLAMPS WITH N/B FOR SP-55

Supply of STAY CLAMP WITH N&B PCC POLE 8.5 MTR

Supply of STAY INSULATOR 75x90 MM

Supply of SHACKLE INSULATOR 75X90 MM WITH NUT BOLT

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 120 Sqmm TYCO/RPG/3M Make.

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 95 Sqmm TYCO/RPG/3M Make.

Supply of Earth Clamp off size.

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer (Sintex/RMC make or other ISO reputed company) with Panel Lock with key)

Supply of Crimping type Al. Lug (25-100) SQ.MM

Supply of MS Flat 40x6 MM

MANRAJ ELECTRICAL & INFRASTRUCTURE (BID ID -408481)

M/S J K ELECTRICALS (BID ID -408645)