GENERAL-Meenkara Dam-Dam safety- Providing reduction gear box and EM Brake for the 2 Nos of Spillway shutters at Meenkara Dam-General Mechanical Work

DISMANTLING, MACHINING, CONVEYANCE, SUPPLY, FABRICATION, PAINTING AND ERECTION of HOISTING MECHANISM of SPILLWAY SHUTTER

OD13706/2025-2026:CUTTING, DISMANTLING, LOWERING, LEADING and STACKING at a convenient place of existing chequered plate, motor cover, motor with brake, gear wheel and pinion, plummer blocks, line shafts and flange coupling including cost of material, labour, energy charges, tools and plants.(#)

OD32432/2025-2026:HIRE CHARGE of light goods carrier for the CONVEYANCE. (existing line shaft for machining to the workshop and return to the site.) (#)

OD32431/2025-2026:MACHINING of existing line shaft to required dimensions to suit the new reduction gear box excluding conveyance charge.

OD13712/2025-2026:SUPPLY of ELECTRO MAGNETIC THRUSTER BRAKE.

OD32426/2025-2026:SUPPLY of MANUAL OPERATING MECHANISM comprising Chain, Sprocket, Shaft, Plummer blocks, Three jaw coupling, Engaging/Dis engaging lever and connecting rod and Operating handle etc.

OD13715/2025-2026:Supply of bolt and nut up to 300 mm length including cost of conveyance.(#)

OD13774/2025-2026:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges(#)

OD13773/2025-2026:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges.(#)

OD13778/2025-2026:Supply of MS round bar including cost of conveyance charges. (#)

OD13775/2025-2026:[85-110] Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.(#)

OD13784/2025-2026:PAINTING with 2 coats of ALUMINIUM PAINT over 1 coat of ZINCHROMATE PRIMER as per IS1477:1994 after HAND and POWER TOOL cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site.(#)

85.111:Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

OD13782/2025-2026:SUPPLY of REDUCTION GEAR BOX (Foot mounted worm reduction gear box suitable for 7.5HP, Model FU4 Ratio 5:1 @ 1500 RPM, Rating 19HP with double output shaft)

OD13783/2025-2026:SUPPLY of SNA 511 PLUMMER BLOCK with BEARING 2211K and H3311 SLEEVE suitable for 2'' shaft

OD13942/2025-2026:INSTALLATION of Reduction gear box, Motor, EM brake, Manual operating mechanism, Line shaft, Plummer block and flange coupling in proper position and correct alignment.

OD13944/2025-2026:Hire Charges of diesel generator set at site

OD13943/2025-2026:CONDUCTING TRIAL RUN of spill way shutters after completion of work

OD30136/2025-2026:SUPPLY of OPERATING HANDLE for SPILLWAY/SLUICE/EMERGENCY SHUTTER.

OVERHAULING of MOTOR and EM BRAKE of SLUICE and EMERGENCY SHUTTER

OD14030/2025-2026:DISMANTLING, OVERHAULING, REWINDING, INSTALLATION and TRIAL RUN of 12 HP( Hoist duty type) induction motor

OD14032/2025-2026:DISMANTLING, OVERHAULING, REWINDING, INSTALLATION and TRIAL RUN of 10 HP( Hoist duty type) induction motor

OD13995/2025-2026:SUPPLY of ELECTRO MAGNETIC THRUSTER BRAKE.

OD14037/2025-2026:DISMANTLING of unserviceable EM brake and INSTALLATION with new one.

OD14168/2025-2026:SUPPLYING and FIXING of individual starter board including cost of all labour, materials, incidental charges etc

OD14183/2025-2026:SUPPLY of 4.0 sq mm 3 core copper conductor cable ELECTRICAL CABLE

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD32760/2025-2026:SUPPLYING, STACKING and REEVING of DIA 8mm MS CHAIN.(#)

85.103:Supply of MS checquered plates including cost of conveyance charges

OD32777/2025-2026:[85-110] Fabrication and supply of Structural steel wheel gate and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.(#)

OD32778/2025-2026:DISMANTLING of old corroded EXTENSION CHANNEL, SLUICE WELL PLATFORM and LADDER- LIFTING and LEADING and STACKING the SCRAP MATERIALS. including cost of all materials, labour charges, hire charges, energy charges, conveyance, all leads and lifts etc. complete.(#)

85.111:Erection of the gates safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc complete as per direction of departmental officer at site

Please Enable Macros to View BoQ information