Supply Providing Furniture to Adyapaka bhavan building Thrissur

Furniture

Supplying and providing Wooden Cots (Double) of size 90 x 200 cm, legs and frames made with hard wood like pincoda etc and top covered with 9 mm thick plywood 5 ply with Teak ply on both face etc including finishing with melamine polish on exterior surfaces.

Supplying and providing Wooden Cots (Single) of size 80 x 200 cm, legs and frames made with hard wood like pincoda etc and top covered with 9 mm thick plywood 5 ply with Teak ply on both faces etc including finishing with melamine polish on exterior surfaces.

Supplying and providing Bed side table of size 45 x 35 x 30 cm, made with 18 mm thick exterior grade - MDF both side decorative lamination board, liping the edges with 2mm thick PVC edge band etc complete.

Supplying and providing Wardrobe of size 80x 210x 50 cm, made with 18 mm thick exterior grade - 1 MDF both side laminated (Teak veneer) board, edges lipped with 2mm thick PVC edge band, including providing drawer at inside, racks and all fittings like automatic hinges, handles, slider, hanger rod etc.

Supplying and providing TV Stand of size 110x 75x 50 cm, made with 18 mm thick exterior grade plywood both side Teak veneer lamination board, liping the edges with 2 mm thick PVC edge band as per drawing etc complete.

Supplying and providing Wooden Writing Tables of size 70x50x75 cm with single drawer, legs and frames made with hard wood like pincoda etc snd top drawer with 18/9 mm thick exterior grade plywood both side o Teak veneer lamination, 2 mm thick PVC edge band etc as per drawing including finishing with melamine polish on wood surfaces.

Supplying and providing Luggage Rack of size 80x50x45 cm made with 18 mm thick exterior grade plywood both side teak veneer lamination board, liping the edges with 2 mm thick PVC edge band etc complete.

Supplying and providing Main Reception Counter Table of size 180x65x105 cm made with 18 mm thick exterior grade plywood both side Teak veneer lamination board, edges lipped with 2 mm thick PVC edge band including providing drawers at inside, rack as per drawing and all fittings like automatic hinges, handles, slider, etc.

Supplying and providing Back cup board of size 180x40x80 cm at Reception Counter made with 18 mm thick exterior grade 1 MDF both side laminated board, edges lipped with 2 mm thick PVC edge band including providing pull out drawer at inside, racks and all fittings like automatic hinges, handles, slider, hanger rod etc.

Making of Stages in Conference halls as the following specifications. The height of stage is 60 cm from floor with steps on two sides (30 cm tread & 15 cm rise). The supporting frames of stage shall be fabricated with M.S.Tubes as sown in the drawing and painted over with epoxy grey colour primer two coats. The top and exterior sides to be covered with 18 mm thick HDHMR boards (TESA) or equivalent) by means of oxidised mild steel screws 50 mm long over the frame work already done and finally laying with 8mm thick HDF laminate flooring boards (TESA or equivalent) over top and all exposed areas of existing sub strata-HDHMR exposed areas of existing sub strata -HDHMR board. The flooring boards shall be fixed in correct level on lock & seal method with Zero gap joints. (Area of shall be measured at top stages only).

Providing Podium of approved shape for the stage with 18 mm thick exterior grade plywood both side Teak veneer lamination board as per the design and approval of Architect/KTSS.

ARUN BOSE (BID ID -2174336)

PAVAN ENGINEERING WORKS (BID ID -2177533)