ED/IIMC/NIT/1/24-25 /118

Amount

Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.; upto 150 mm. thick.

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.

Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement

Brick work with 1st class bricks in cement mortar (1:4) In superstructure, ground floor

Stripping off worn out plaster and raking out joints of walls, celings etc.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary, with sand and cement mortar 1:4, 20 mm thick plaster.

Applying 2 coats of bonding agent with synthetic multi-functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification

Labour for Chipping of concrete surface etc.

Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable arrangement to hold the stone properly by brass / copper hooks including pointing in cement mortar (1:2) (1 cement : 2 marble dust) with admixture of pigments matching the stone shade, including grinding and polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete. etc.

Rendering the Surface of walls and ceiling with White Cement based wall putty of approved make & brand. (1.5 mm thick)

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly etc. One coat on new surface.

Scraping of moss, blisters etc. thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.

Applying exterior grade Premium quality Acrylic primer having superior alkali and efflorescence resistance specially formulated properties of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of the EIC. One coat

Protective and Decorative Acrylic exterior emulsion paint of approved quality. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer etc. Two coats. Super Protective 100% Acrylic Emulsion

Protective and decorative Textured exterior high class matt finish paint of approved quality, composed of special Thermoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer etc. Two Coats

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. one coat

Painting with best quality synthetic enamel paint of approved quality etc. On steel or other metal surface Two coats (with any shade except white)

Supplying bubble free float glass of approved make and brand etc.including cutting to required sizes and fitted and fixed with nails and putty complete etc. 6 mm thick ; coloured, toughened glass

Welding in M.S. structural work with gas or electric etc. Continuous weld/Tack weld.

Supplying Glazing Silicon of approved make and brand for fixing of Glass on Sub frame on Structural Glazing/Curtain wall etc.

Supplying Weather Silicone sealant of approved make and brand for fixing/filling of grove line between the Glasses or any other material for facial work as per direction of Engineer-incharge. for Structural Glazing/Curtain wall.

SENCO ENTERPRISE (BID ID -3125973)

SHRISTI (BID ID -3125915)

PTS ASSOCIATES (BID ID -3125355)

MRINAL KANTI GHOSH (BID ID -3125893)

MD AZAD ALI CONSTRUCTION (BID ID -3125420)

pioneer coop engineers and construction (BID ID -3125601)

HASANUR GAMAN SEKH (BID ID -3125411)