Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance S O SH BHAWANI SINGH VPO BHRAIN TEHSIL BHUNTAR DISTT KULLU HP PIN 175125 | KULLU | HIMACHAL PRADESH | 175125 | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance VILLAGE P O SALGRAN TEHSIL UDAIPUR DISTRICT LAHAUL SPITI H P | Admitted-Finance |
Tender Value
₹25.7 L
EMD Value
₹51,400
Closing Date
13 Feb 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Xen RDD and PR Mandi
Old Zila Parishad Bhawan Jail Road Mandi HP
Construction of Atal Gyan Kender on first floor of existing Gramin Hut at Patlikuhal District Kullu HP SubHead Construction of Library Hall, Librarian room, toilets and stair case including WS and SI complete
2023_DRDPR_67906_6
4
Open Tender
Civil Works - Buildings
Item Rate
270 days
Patlikuhal
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,500
xen rdd
₹51,400
Yes
23 Jan 2025
6 Feb 2023
14 Feb 2023
6 Feb 2023
13 Feb 2023
6 Feb 2023
Amount
Providing and laying cement concrete 1 : 4 : 8 (one cement : four sand : eight graded stone aggregate 40 mm (Forty millimetre) nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge.
Providing and laying M- 25 (twenty-five) grade reinfoced cement concrete work mechanically mixed and vibrated with minimum cement contents of 400 Kg. (four hundred Kilogram) per cubic metrewith 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced cement concrete work in:- Columns, pillars, piers, abutments, posts and struts etc. and mass concrete including carriage of materials with in all leads, lifts and other incidentals .
Providing and laying M- 25 (twenty-five) grade reinfoced cement concrete work mechanically mixed and vibrated with minimum cement contents of 400 Kg. (four hundred Kilogram) per cubic metre with graded crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete work in in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand) : 3 graded stone aggregate 20 mm nominal size).including carriage of materials with in all leads, lifts and other incidentals .
Providing Tor steel reinforcement TMT bar Fe 500 (Five Hundred) ISI make high yield strength for reinforced cement concrete work including bending, binding and placing in position cost of binding wire complete upto floor all level including carriage of materials with in all leads, lifts and other incidentals complete in all respect as per as direction and to the entire satisfaction of Engineer -in -Charge.
Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty millimetre X Thirty millimetre X Five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge in:- Lintels, beams, plinth beams, girders, bressumers and cantilevers - Above plinth level
Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty millimetre x Thirty millimetre x five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge in:-Columns, Pillars, Piers, Abutments, Posts and Struts etc.complete
Providing form work with steel plates 3.15mm (three point fifteen millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty millimetre x Thirty millimetre x five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies in any height of propping and centering below supporting floor to ceiling upto floor all level and removal of the same for in-situ reinforced concrete and plain concrete work including carriage of materials with in all leads, lifts and other incidentals or as per direction of Engineer-in-charge in:- Suspended floors, roofs, landings, balconies and access platform
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor alllevel in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand ) including carriage of materials with in all leads, lifts and other incidentals.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floorin all level.Cement mortar 1:4 (1 cement :4 coarse sand) including carriage of materials with in all leads, lifts and other incidentals.
15mm (Fifteen millimeter) cement plaster in single coat on the rough/fair side of brick/concrete /stone walls for interior & Exterior walls plastering up to all floor level including arises, internal rounded angles, chamfers and /or rounded angles not exceeding 80mm (Eighty millimeter) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) upto all floor level including carriage of materials with in all leads, lifts and other incidentals.
6mm(six millimeter)thick cement plaster to ceiling in cement mortar 1:3 (one cement :three sand as per direction of engineer-in- charge including carriage of material with In all leads , lifts in all floors and other incidentals completes
Distempering (two coats) with oil bound washable distemper of approved brand and manufacture nerolac/Asian paint and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth upto all floor level all complete.including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm (Twenty x Ten x Two) millimetre and braced with flat iron diagonals 20x5 mm (Twenty x Five)millimetre size, with top and bottom rail of iron diagonals 20x5 mm (Twenty x Five )millimetre size, with top and bottom rail of T-iron 40x40x6 mm(Forty x Forty x Six )millimetre, with 40 mm (Forty millimetre) dia steel pulleys,complete with bolts, nuts, locking arrangement,stoppers, handles, including applying a priming coat of approved steel primer, including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing M.S. grill of required pattern in wooden/steel frames of windows etc. with M.S. flat square or round bars with round headed bolts and nuts or by screws plain grill including carriage of materials with in all leads, lifts and other incidentals.
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm Zero point Nine/(Ten square millimetre) over an under coat of primer applied @ 0.80 ltr/10 sqm Zero point Eight /(Ten square millimetre) of approved brand and manufacture including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. MS Tube including carriage of materials with in all leads, lifts and other incidentals.
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) - For fixed portionwith all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE "JINDAL/HINDALCO OR EQUIVALENT
Providing and fixing aluminium work for Power coated sliding door, with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc.made of 100x44 mm rectangluar box section ,85x44mm door vertical section,95x44mm door top and middle section and finished with 12mm prelaminated partical board ,glazing clips , etc complete. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) - For fixed portionwith all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE "JINDAL/HINDALCO OR EQUIVALENT
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): etc.: -With float glass panes of 4.0 mm thickness weight not less than 10.00 kg / sqm with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE "JINDAL/HINDALCO OR EQUIVALENT
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE "JINDAL/HINDALCO OR EQUIVALENT
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) - Powder coated aluminium (minimum thickness of powder coating 50 micron)with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE "JINDAL/HINDALCO OR EQUIVALENT
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment).with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE "JINDAL/HINDALCO OR EQUIVALENT
Providing and fixing 100mm (One Hundred) mm brass mortice latch & locks with 6 livers (Six )without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing aluminium round shape handle of outer dia 100 mm (One Hundred) mm with SS screws etc. complete as per direction of Engineer-in-charge. Powder coated minimum thickness 50 micron (Fifty micron) aluminium including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. All accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals :125 x 65 x 2.12 mm ( one twenty five into sixty five into two point one two millimetre)
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete All accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals :75 x 47 x 1.70 mm( one Seventy five into forty seven into one seventye into one point seventy millimetre)
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm (Three Hundred x Sixteen) millimetre including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :300x10 mm (Three Hundred x Ten ) millimetre including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200x10 mm (Two Hundred x Ten)mm including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing 12 mm (Twelve millimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. - Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including carriage of materials with in all leads, lifts and other incidentals.
Kota stone slab flooring over 20 millimetre (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25mm thick with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.- Flooring
Kota stone slabs 20 mm twenty millimetre thick in risers of steps, skirting, dado and pillars laid on 12 mm millimetre (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing completewith all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals..
Providing and laying anti skid Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. make Kajaria,simplo, johns,Nitco
Providing and fixing Digital ceramic glazed wall tiles 30x45 cmconforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.. make Kajaria, simplo, johns,Nitco
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing 0.60mm (Zero point sixty millimetre) thick preprinted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns primer coating including fixing with screws preprinted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia metre with preprinted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.. Internal work -Exposed on wall MAKE - Astral,Aashivad,Finolex
CPVC Pipes 15 mm dia (Fifteen milimetre)
CPVC Pipes 20 mm dia (Twenty milimetre)
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.20 mm nominal bore (Medium)with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.Make -Jindal, Aggrwal Industries
GI Pipes 20 mm dia (Twenty milimetre)
Providing and fixing P.V.C. waste pipe (Flexible type) for sink or wash basin including P.V.C. waste fittings complete.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.Make: Finolex, Aashirvad, Astral
Providing and fixing 100mm (one hundred millimetre) sand cast iron grating for gully floor or Nahni trap including carriage of materials with in all leads, lifts and other incidentals.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. cast iron gratings at floor
Providing and fixing water closet with 10 liter flushing cistern squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. Make :CERA,Parryware,Hindware,Somany
Providing and fixing white vitreous china pedestal type water closet with 10 litre flushing cistern (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. Make :CERA,Parryware,Hindware,Somany
Providing and fixing 8 mm (eight millimetre ) dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing White Vitreous China Wash basin size 630x450 mm (Six hundred Thirty x four hundred fifty millimetre) with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. Make cera, Parryware, Hindware, Somany
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. Make : CERA, Parryware, Hindware, Somany
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour.Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gmswith all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. Brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.Make :CERA,Parryware,Hindware
Providing and fixing Division plate for urinal 600x300mm (six hundred into three hundred millimeter) vitreous china Division plates complete as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.Make :CERA,Parryware,Hindware
Providing and fixing C.P. brass angle valve /angle cock for basin mixer /others locations of approved quality conforming to IS:8931with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. - 15mm nominal bore
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing Rectangular shape 453x357 mm( four hundred fifty three into thre hundred fifty seven millimetre) mirror of superior glass mounted on 6mm (six millimetre) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials with in all leads , lifts and other incidentals.
Providing and fixing 20 mm (twenty millimetre )nominal bore, 120 mm (one hundred twenty millimetre) long, weighing not less than 198 gms PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and fixing C.P. brass long nose bib cock for water of approved quality conforming to IS standards and weighing not less than 810 gms.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.
Providing and placing PVC Water Tank of 1000 Litre Capacity on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. MAKE :Sintax, Plasto,Vectus OR Equivalent
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE :Supereme Industries,Finolex,Aashirvad pipe ltd.
75 mm (seventy five millimetre )dia PVC Pipe
110 mm (one hundred ten millimetre ) dia PVC Pipe including roof drain
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. - Coupler MAKE :Supereme Industries,Finolex,Aashirvad pipe ltd.
75 mm (seventy five millimetre ) dia Coupler
110 mm (one hundred ten millimetre ) mm dia Coupler
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. - 87.5 degre bend MAKE :Supereme Industries,Finolex,Aashirvad pipe ltd.
75 mm (seventy five millimetre ) dia Bend
110 mm (one hundred ten millimetre ) mm dia bend
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals. - Shoes MAKE :Supereme Industries,Finolex,Aashirvad pipe ltd.
75 mm (seventy five millimetre )dia Shoe (Plain)
110 mm (one hundred ten millimetre )dia Shoe (Plain)
Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50( fifity into fifty into fifty )millimetre hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE :Supereme Industries, Finolex, Aashirvad pipe ltd.
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.MAKE :K.M ENTERPRISES,Parasnath Buildwell Pvt. Ltd
ISHANT AZAD CONTRACTOR
RANDHIR JAMWAL
rumal singh
MAYA RAM
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .