Electrification of Traffic building Commercial Block at Wharf

Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch modular plate suitable GI box and earthing the point with 1.5sq mm FRLS PVC insulated copper conductor single core cable etc. as required. (NOTE: the total distance from the switch box to the point will not exceed 5mtr, incase if length increase above 5 meters the wiring shall be measured under Sl.No.4)

Group controlled light point with 1.5 sq mm wire-Wiring for Group controlled light point (from one point to another point) with 3 x 1.5sq mm PVC insulated. (FRLS) Copper conductors cable in surface / recessed mounted rigid medium class 20mm PVC conduit with all accessories as required. (NOTE: this item does not include the cost of MCB or 16 amp / 6 amps one way switches the total distance from one point to another point will not exceed 5 meters Incase if the total length increase, the additional length shall be measured under Sl. No. 4 the distance from DB to 1st point will be measured under point circuit wiring)

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, 2 way modular switch modular plate suitable GI BOX AND EARTHING THE POINT WITH 1.5 SQ MM FRLS PVC insulated Copper conductors single core cable etc. as required. (NOTE: the total distance from switch box to the point will not exceed 5 mtrs incase if length increases above 5 meters, the wiring shall be measured under Sl.No. 4)

Circuit wiring - Wiring for circuit/ sub-main wiring along with earth wire with the following 2 x 1.5 sq. mm + 1 x 1.5 sq.mm earth wire sizes of FRLS PVC insulated copper conductors single core cable in surface/ recessed medium.

Circuit wiring -Wiring for circuit/ submain wiring along with earth wire with the following 2 x 2.5 sq. mm + 1 x 2.5 sq.mm earth wire sizes of FRLS PVC insulated copper conductors single core cable in surface/ recessed medium class PVC conduit as required.

Circuit wiring -Wiring for circuit / submain wiring along with earth wire with the following 2 x 4 sq. mm + 1 x 4 sq. mm earth wire sizes of FRLS PVC insulated copper conductors single core cable in surface / recessed medium class PVC conduit as required.

Supply, fabricating and installing MS items such as Tees/ angles / channels etc. on floor / ceiling / wall including necessary civil work such as grouting finishing etc and painting with two coats of primer and two coats of synthetic enamel paint as required.

Supplying and fixing following 6 pin 15 / 16 amp socket outlet with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box, inter connection etc. as required complete.

Supplying and fixing following 15 / 16 amp switch with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box, inter connection etc. as required complete.

Supplying and fixing following Telephone Socket outlet with modular plate & cover on surface or in recess, including providing and fixing suitable size GI box, inter connection etc. as required complete

Supplying and fixing following Bell push with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box, inter connection etc. as required complete.

Supplying and fixing call bell / buzzer suitable for single phase, 230 volts, complete as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 5/6 & 15/16 amps modular switch connection etc. as required.

Supply & fixing Computer points with 3 Nos 3 pin 5/6A socket with 2 Nos 5/6A switch with modular front plate and cover surface/recess including providing and fixing suitable size GI boxes, its interconnections etc. as required complete. (NOTE: 2 Nos 5/6A sockets fixed at 60cm above with 1 No 5/6 A socket at 1m above FFL)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing of following 20 mm sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following 25mm sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following 32 mm sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following 20 mm sizes of medium class PVC conduit along with accessories in surface/ recess making chases in wall including making good by applying Renderoc S2 as per manufacturers specification and finishing with putty, 1 coat primer and 2 coats acrylic emulsion paint to match the surface.

Supplying and fixing of following 25 mm sizes of medium class PVC conduit along with accessories in surface/ recess making chases in wall including making good by applying Renderoc S2 as per manufacturers specification and finishing with putty, 1 coat primer and 2 coats acrylic emulsion paint to match the surface.

Dismantling of following medium class PVC conduit along with wiring accessories in surface making good by applying Renderoc S2 as per manufacturers specification and finishing with putty, 1 coat primer and 2 coats acrylic emulsion paint to match the surface.

Supplying and fixing following 8 way (8 + 18), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volt, on surface/ recess, complete with tinned copper bus bar, common neutral link earth bar din bar powder painted including earthing etc. as required (but without MCB /RCCB/isolator)

Supply and fixing of following 2 pole 25 amps. (415Volt), 30mA sensitivity. rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.

Supply and fixing of following 4 pole 40 amps. (415Volt), 30mA sensitivity rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required.

Supply and fixing of 6A to 32A, SP, D - CURVE following rating, 10 KA, Miniature Circuit Breakers as required.g all the necessary accessories as required complete.

Supply and fixing of 40A to 63A, TP, B/C - CURVE following rating, 10 KA, Miniature Circuit Breakers as required.

Supply of indoor decorative surface mounted LED Batten with Polycarbonate diffuser, along with driver, system wattage of maximum 20 watts lumens output of luminaire greater than 2000, powerfactor > 0.9, rated life of L70 @ 25000 hours, system efficacy > 100 lumens/ watt and including all the necessary accessories as required complete.

Supply of LED recess mounted down light made of die cast aluminium, along with driver, system maximum wattage of 15Watts with lumen output of luminaire greater than or equal to 1500 lumens, power factor> 0.95, THD<10%, rated life of L70 @50000 hours, system efficacy > 90 lumens per watt and including all the necessary accessories as required complete.

Supply of recess mounted LED panel light fixture light made of die cast aluminium with corrosion resistance powder coating and with proper diffusers along with driver, system wattage of 36 watts with lumen output of fixture > or = to 3600 lumens, power factor > 0.95, THD < 10%, rated life of L70 @50000 hours, system efficacy > 100 lumens per watt and including all the necessary accessories as required complete.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 Star rated, ceiling fan with Brush Less direct current (BLDC) motor, class of insulation:B, 3 Nos blades 30cm long down rod 2nos canopies, shackle kit safety rope, copper winding, power factor not less than 0.9, service value (CMM/W) minimum 6.85, air delivery minimum 215 CMM 350 RPM (tolerance as per IS : 374-2019), THD < 10% remote or electronic regulator unit for speed controller and all remaining accessories including safety pin, nut bolts washers temperature rise = 75 degree C (max) insulation resistance more than 2 M ohm suitable for 230 volt 50 Hz single phase AC supply, earthing etc. complete as required.

Supply of 250 mm sweep, 900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting/LED Fitting of all types, complete with all accessories and tube etc directly on ceiling /wall including connections with 1.5 sq mm FRLS PVC insulated copper conductor single core cable and earthing etc as required.

Installation, testing and commissioning of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing & commissioning etc as required.

Installation, testing and commissioning of LED down lighter fitting on false ceiling with all mounting accessories as required complete including inter connections using 3 core 1.5 sq mm FRLS PVC insulated copper conductor single core cable and earthing etc. as required.

Installation, testing and commissioning of LED PANEL type fittings with GI chain and 2x2 adapter - with all accessories etc. on false ceiling including supplying and fixing of GI chain and 2x2 adaptor hook arrangement, up to 60cm length, wiring 3 runs of 1.5sq mm FRLS PVC insulated stranded copper conductor cable as required.

Numbering of ceiling fan / exhaust fan/ fluorescent fitting as required.

Providing and fixing 3.15mm Cu (10 SWG) wire on surface or in recess for connections etc. as required.