TOKEN No GE-K-10-2024-25 - REPAIR AND REPLACEMENT OF FLOORING WALL PANELLING FALSE CEILING JOINERY PLUMBING AND MISC EM WORKS IN VARIOUS UNITS AT KAKSAR CHHANIGUND HARDAS AND APATI UNDER GE KARGIL

Amount

Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.

M & L for 75mm thick, plain cement concrete, type D-2 1:3:6 (using 40mm graded stone aggregate) as in sub base flooring, surface finished even and rough to receive floor topping, complete all as specified and directed by Engr-in-Charge.

M & L for 25 mm thick plain cement concrete type B-0 (12.5mm graded stone aggregate) 1:2:4 as in floor, complete all as specified and directed.

M & L for Joint free Non-skid coloured ceramic tiles, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:4, complete all as specified.

M & L for endura tiles, heavy duty type of size 300mmx300mm, 10mm thick, non skid, acid and scratch resistance laid over 15mm thick screed bed in CM 1:4 as in floor, jointed in neat cement slurry and pointed with white cement and pigment to match the shade completed all as specified and as per direction of manufacturer instuctions/ Engr-in-Charge.

M & L for Coloured Glazed ceramic tiles of size 300x450x7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over and including 10 mm thick rendering in CM (1:3), complete all as specified and directed.

M & L for chequered cement concrete tiles 300mm x 300mm x 25mm thick with grey cement and pigment and set jointed and pointed in neat cement slurry as in floor over 20 mm thick sreed bed or bedding layer in CM 1:4, complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge.

M & L for granite work (table rubbed, polished and moulded) 18-20 mm thick as in steps,jambs, pillars, plateforms and like machine cut bedded and jointed & pointed with white cement and pigment to match the shade of granite stone incl grinding and polishing over 20 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed

Taking up or down steel water tubing of 20mm dia bore and connection incl cleaning for refixing or removal to stores, complete all as specified and as directed

Taking up or down steel water tubing of 25mm dia bore and connection incl cleaning for refixing or removal to stores, complete all as specified and as directed

M&L for 20mm 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

M&L for 25mm 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

Supply & fixing in repair 10 ltr PVC valveless,syphonic action type, flushing cistern and flushing pipe, low level with inlet, ball valve, float and handle incl brackets complete all as specified.

Supply & fixing in repair 15mm Stop valve/angle cock, cast copper alloy fancy type chromium plated high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed.

Supply & fixing in repair 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed.

Supply & fixing in repair 15mm bore Pillar taps cast copper ally, with capstain head, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed

Supply & fixing in repair 450 mm long PVC connection 15mm bore with PTMT nuts complete all as specified.

Dismantling water storage tanks of capacity exc 250 & n.exc 500 ltrs and removing to store complete all as specified and as directed.

Dismantling water storage tanks of capacity exc 500 & n.exc 1000 ltrs and removing to store complete all as specified and directed.

Supply and fixing rotational moulded polyehtylene water storage tank of 500 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I

Supply and fixing rotational moulded polyehtylene water storage tank of 1000 ltrs capacity (Cylindrical vertical with closed top) in position all as specified in SSR Part-I.

Supply & fixing in repair Vitreous china squatting pan, Orissa Pattern size 580mm x 440mm white with integral foot rest but excluding flushing cistern and flush pipe, placing in position including provision of lime concrete bedding, complete all as specified

Supply & fixing in repair vitreous china wash hand basin white counter type 570mmx450mm fixed on granite slab incl waste pipe and CP waste coupling, cutting for erecting granite slab, complete all as specified.

Supply & fixing in repair one piece EWC chinaware with soft closet cover and mounted flushing cistern of size 620x370x670mm white in colour complete all as specified by Engr-in-Charge

Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) and incliding white plastic water closet seat cover with mild steel CP or aluminisied hinging device complete all as specified and as directed by Engr-in-Charge

Taking down shutters of any description exc 1 Sqm but n.exc 2 Sqm m each.

Supply & fixing 35mm thick second class soft wood (KAIL) plain, framed, panelled shutters (any number of panels), 35 mm thick with panels of 9mm ply BWP commercial type or 12 mm thich of veneered particle board with commercial veneering both faces as in doors, complete all as specified and directed by Engr-in-Charge.

Supply & fixing 35mm thick second class soft wood (KAIL) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares with plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, complete all as speicified and directed by Engr-in-Charge.

M&L preparation of wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

Supply & fixing in repair butt hinges medium weight cold rolled mild steel of 100mm long.

Supply & fixing in repair aluminium alloy, anodised sliding door bolt with hasp staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long.

Supply & fixing in repair Aluminum Anodised barrel tower bolts of extruded section, 150mm long.

Supply & fixing in repair anodised aluminium handle, cast type anodised section 150mm size.

Supply & fixing in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples including etc, complete all as specified.

Supply & fixing in repair curtain rails anodised aluminium alloy chromium plated with fixing brackets, stops, rollers etc., complete all as specified.

Supply & fixing in repairs 300 mm long brass body ordinary rat tail rod pattern springs including roller and roller plate complete complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L rendering 15mm thick cement plaster in cement mortar (1:4) finished even & fair without using extra cement on brick/concrete surfaces.

M&L rendering 15mm thick cement plaster in cement mortar (1:6) finished even & smooth without using extra cement on brick/concrete surfaces.

M&L for two coats of oil bound distemper on newly plastered surfaces of walls including preparation of surfaces.

M&L for two coats of cement based paint on newly plastered surfaces of walls including preparation of surfaces.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as directed.

Dismantling of timber scantling fillets, rails, posts rafters, purlins etc under 40 Sqcm, in any position as in unframed work, complete all as specified and directed by Engr-in-Charge.

Supply & fixing second clas soft wood fillets square or rectangular in section sectional area exceeding 13 sq cm and n exc 25 sq cm as in scantling secured with nails or brads complete all as specified and directed.

Supply & fixing 9 mm thick Prelaminated particle board, interior grade, prelaminated both sides with one side with decorative choice lamination & other side balancing fixed with nails to timber frame work on wall/ceiling complete all as specified and directed.

Supply & fixing 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work as in wall/ceiling, complete all as specified and directed by Engr-in-Charge

M&L for 2nd class softwood Moulding as in cornices, picture rails and the like n.exc 6 Sqcm, complete all as specified and directed.

Supply & fixing 25 mm thick second class teak wood beading rectangular/square /rocked in shape weight finished of size not exc 3 sqcm fixed with nails frenched polished (two coats), complete all as specified and directed.

M&L laminated wooden flooring 8mm thick size 193mm x 1214mm of High density hard wood fibre board (HDF) with highly anti abrasive protective overlay and melamine impregnated decorative film with interlocking system, laid over 2mm thick foam with suitable arrangement including dismantling of existing old one, complete all as specified and as directed

Taking down carefully copper or aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.

M&L for Point wiring for light/fan/bell with FRLS cable of 1.5 Sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5 Sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS/GI sunken box with 3mm thick pre laminated hylum sheet/PVC box with back plate,flush/surface type for mounting fittings such as switches, socket and regulator, complete all as specified and directed for one light point or bell/buzzer point controlled by one switch.

All as per Srl item No 54.00 here in before but for one 3 pin 5 Amps switch socket on same board.

All as per Srl item No 54.00 here in before but using cable size 2.5 Sqmm and earth conductor 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board.

All as per Srl item No 54.00 here in before but using cable size 2.5 Sqmm and earth conductor 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.

Supply & fixing Switch piano flush type 5 Amps, single pole one way.

Supply & fixing Switch socket combination 2 in 1, and 3 and 2 pin, 5 Amps flush type.

Supply & fixing switch socket combination 2 in 1, 5 and 15 Amps flush type.

Supply and fixing socket Outlet 2 in 1, 6 Amp flush type

Supply & fixing ceiling rose on PVC square block surface bakelite 65mmx50mm, two to three terminals.

Supply & fixing in replacement Sheet metal enclosure for DB's Double door, single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required, complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing, complete all as specified and directed.

Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing, complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing LED 1x18/20 Watt, 220 V, AC decorative box type fitting with driver, holder including LED tube ligh having lumen out put 100lm/wattt, CCT:6500K, PF>0.9, and connecting up with two core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed.

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.

Note : Deduction for amount of Rs 43,640.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.

M/S BHAT ENGINEERS

M/S TRADE LINK

JP AND CO.

KASHMIR FAIR DEAL SERVICES

M/S MOHD KHAN

M/S Ghulam Mustafa