ADDITION ALTERATION IN TOILET AND BATHROOM OF CERTAIN BLOCKS ALONGWITH PROVISION OF ALUMINIUM PARTITION AND 01 SPLIT AC (HOT AND COLD) IN MH AMBALA UNDER GE (SOUTH) AMBALA CANTT

Amount

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed

Supply & fixing Steel water tubing of 15 mm bore, medium grade galvanized, with all fittings laids in floor with wall and on ceiling, complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed

Supply & fixing Steel water tubing of 20 mm bore, medium grade galvanized, with all fittings laids in floor with wall , complete all as specified and directed .

Material and labour for cutting chases for concealed water tubing and making good, (cutting not exceeding 10 cm girth) (brick walls) in cement mortar (1:3) and making good complete all as specified and directed

Material and labour for PVC water storage tank 500 Litre capacity HDPE triple layer fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, complete all as specified. including dismantling of old tanks of of any description complete all as specified.

Material and labour for PVC water storage tank 1000 Litre capacity HDPE triple layer fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, complete all as specified. including dismantling of old tanks of of any description complete all as specified.

Supply and fixing (in repair) 15mm fancy type, chromium plated, angle cock,/ stop cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified.(Note : Weight of stop cock shall not be less than 0.575 Kg)

Supply and fixing ( in repair) CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated` with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg)

Supply and fixing Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repairs Chromium plated shower roses 125 size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

Supply and fixing Chromium plated (CP) grating round 100/125 mm size as in repairs all as directed

Supply and fixing in repair toilet paper holder choromium plated all as specified and directed

Supply and fixing in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

Supply and fixing SS grab bar 692mm long for disabled persons complete all as specified and directed

supply and fixing liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden /plastic cleats (mim weight 105 gms), complete all as specified.

Supply and fixed CP Health faucet shower including 1.50 meter long flexible tube. complete all as specified.

Supply and fixing in repair 10 litre capacity Flush polypropylene cistern, , white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified.

Supply and Fixed (in repair) for vitreous china squatting pan of orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified.

Supply and fixing (in repair) vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges jointed with pipe complete all as specified.

Supply and fixing in repairs vitreous China bowl urinal Half stall type of size 465x355x265mm (minimum), white, with grating and union for discharge pipe, including providing fixing plugs, bvitreous China bowl urinal flat back half stall of size 465x355x265mm (minimum), white, with grating and union for discharge pipe, including providing fixing plugs, brackets, grating, union and connections to flushing pipe, bedding urinal against wall in CM 1:2, securing bowl with plugs and 60mm long brass screws, pointing around urinal bowl in white cement (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed

Supply and fixing (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified.

Supply and fixing in repair vitreous china, white coloured, counter top wash hand basin, oval type, including cutting for and pinning in, but excluding waste pipe complete all as directed

Demolition and breaking up drain pipes100/75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all asspecified.

Supply and fixing PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall / floors or in gtrenches etc complete as specified and directed by Engr in charge.

Supply and fixing PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall / floor or in trenches complete as specified and directed by Engr in charge.

Supply and fixing PVC (SWR) bends 110 mm bore complete as specified and directed by Engr in charge.

Supply and fixing of PVC (SWR) bends of 75mm radius complete as specified and directed by Engr in charge.

Material and labour PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outter diameter outlet of 75mm as in repairs complete as specified and directed by Engr in charge.

Supply and fixing 110mm dia PVC (SWR) junction single, (Single T) equal or unequal of with access door complete as specified and directed by Engr in charge.

Supply and fixing 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door, complete as specified and directed by Engr in charge.

Supply and fixing 75mm dia PVC (SWR) vent cowl of complete as specified and directed by Engr in charge.

Demolition of brick work built in cement mortar including all quoins pillars etc complete all as specified .

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6), with necessary scaffolding etc complete all as specified and directed.

Taking down cement plaster from brick or concrete surfaces including raking out joints,hacking keys, scrubbing down with water etc. complete all as specified and as directed.

Material and labour for rough cast plaster with and including 15mm thick rendering in CM 1:3 on brick wall or concrete surface as specified in clause 14.22 of SSR Part-I complete all as specified and directed by Engineer-in-Charge. Note:-(i) After applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel aggregate (which is generally of size between 6 to 12 mm depending on the texture required) mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even. (ii) The mix of cement and sand shall be made slightly loose/wetter than normal for rendering to ensure that larger aggregates are thoroughly covered. (iii) Contractor's quoted rate shall include all above provisions and no extra shall be admissible on this account.

Material and labour for 15mm thick rendering on fair faces of brick or concrete surfaces in Cement Mortar 1:6 finished even and smooth without using extra cement complete all as specified.

Material and labour for 15 mm thick rendering on brick or concrete surfaces in cement mortar 1:4 with , finishing the surface even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

Material and labour for rendering 5mm thick in CM (1:3) on ceiling surfces finished even and smooth without using extra cement.complete all as specified and directed.

Material and labour for Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)and applying 3mm thick (Minimum) white cement based wall care putty, finished even and smoot complete all as specified.

Material and labour for two coats of oil bound distemper over a coat of primer incl preparation of new plastered surfaces of walls and applying 3mm thick (Minimum) white cement based wall care putty in two coats, finished even and smoot complete all as specified.

Material and labour for two coats of oil bound distemper incl preparation of new surfaces of ceiling complete all as specified and directed.

Material and labour for complete removal of existing treatment on walls, chajjas facias and efflorescent salts and treating oil and greasy spots washing down with water and two coat of oil bound distemper of old decorated plastered or unplastered surfaces of walls, over a coat of alkaline resistant primer and applying 3mm thick (Minimum) white cement based wall care putty, finished even and smoot complete all as specified.

Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over OLD surface complete all as specified and directed.

Material and labour for two coats of oil bound distemper on ceiling of old decorated plastered or unplastered surfaces of ceiling etc complete all as specified and directed..

Material and labour for one coat of synthetic enamel paint incl preparing old decorated wooden surfaces of any description not otherwise described over 10 cm width or girth complete all as specified and directed.

Material and labour for one coat of synthetic enamel paint incl prepering old painted steel surfaces of any description not otherwise described over 10 cm width or girth complete all as speciied and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete all as specified and directed.

Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified.

Material and labour for coloured glazed ceramic tiles of size 300mm x 450mmx 7mm thick in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed.

Material and labour 20 mm thick black granite stone slab of any type with table rubbed and polished , set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

Material and labour for MS bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipscomplete all as specified and directed by Engr-in-charge.

Material and labour for Reinforced cement concrete (nominal mix), :2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in balcony, chajjas/selfs and similar work complete all as specified and directed.

Material and labour for Formwork to chullah hoods, chajjas, selfs,troughs and similar items including edges, complete all as specified and directed.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongry hold fasts etc., complete all as specified.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified and directed.

Supply & fixing factory made PVC door frame of wall thickness of 5 mm made out of extended 5 mm rigid PVC plain sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member), complete all as specified.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 with particle board core raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed

supply and fixing Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) .with powder coating of any colour (Thickness or powder coating notless than 50 micron). complete all as specified and directed

Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised .complete as specified and directed .

Supply and fixing 200mm long aluminium anodised barrel tower bolts of extruded section .complete as specified and directed .

Supply and fixing butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100 mm long complete all as specified and directed

Supply and fixing Figured glass 3mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, including hacking out the same complete all as specified.

Supply and fixing in repair Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18mm as in gauze door /window/ventilators shutters complete all as specified and directed

Demolition of cement concrete(un-reinforced) of any descriptions, in ground floors not exc 150mm thick, above or below ground level complete all as specified and directed.

Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applying of the following specifications complete all as specified. (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material, dirt, dust etc. (ii) Applying cement slurry mixed with acrylic based polymer moodified cementitous composite compound coating. (iii) First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. (iv) Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126 Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. (v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. Note- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. complete all as directed.

Material and labour for plain cement concrete 1:5:10 type E-2 (using 40mm graded mechanically crushed aggregate) as in foundation/ sub base of floor complete all as specified and as directed by Engr in Charge.

Material and labour for 25 mm thick plain cement concrete 1:2:4 type B-0, (using 12.5 mm mechanically graded crushed aggregate) as in levelling course complete all as specified and as directed.

Material and labour for brick work with sub class-"B" Bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) Completed as specified and directed.

Supply and fixing 3 mm thick sheet glass ordinary quality n.exc 0.50 sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

Material and Labour for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified.

Supply and fixing of anodized aluminium door made out of hollow extruded aluminium sections each door having 2Nos. disc or D type handles, 2Nos aluminium tower bolts 200mm size, one brass mortice lock of six levers with key in duplicate to be fixed with aluminum hinges to the chowkhat shutter to be partly glazed with 5mm thick tinted glass and partly paneled with 12mm thick pre-laminated particle board fixed with glazing clips, rubber beading/gasket, anodized aluminium beading screws, etc. complete all as specified and as directed Notes: (i) Drawings shall be referred at GE (S) Ambala (ii) Minimum thickness of anodisation shall be 15microns (min) (iii) Details of members: Chowkhat frame - 101.6x44.45x1.5mm thick Shutter vertical/style - 83.5x44.45x1.5mm thick Shutter middle rail - 83.5x44.45x1.5mm thick

Supply and fixing aluminium partition wall, 60micron powder coated sections, (minimum thickness of powder coating shall be 50microns) fabricated, size of members 100x44x1.6mm, including making provision for opening, etc. and all necessary cleats, panel inserts not more than 1.44sqm and arrangement to receive and including 5.5mm thick glass and 19mm thick pre-laminated particle board with aluminium beading, glazing cleats, and stainless steel screws, rubber gaskets, beading, etc. complete all as specified and as directed

[E&M PORTION] Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc, complete all as specified and directed.

Material and labour for taking down Exhaust fan of any size/ sweep after disconnecting the wire from existing ceiling rose deposited to store for repair all as specified and directed.

Taking down old Water Heater (Geyser) any type/Size/Capacity with all accessories after removing of all incoming/outgoing pipe line connection and deposited to MES Store Yard for repair complete all as specified and directed.

Taking down old unserviceable VPTN MCCB DB/MCB SPN 8way any of size/capacity complete all as specified and directed.

Taking down old unserviceable MCB SPN/MCB SP of any size/capacity complete all as specified and directed.

Material and labour for point wiring in conduit using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH PVC insulated and unsheathed stranded cable drawn through and including PVC non metallic/mettalic heavy duty concealed/Surface conduit and including replacement of its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes with GI sunken boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paint over a coat of red oxide primer internally and externally including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over sunken box for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan/Fxhaust fan point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan Point controlled by one switch complete all as specified and as directed. NOTES : - 1. Switch, socket and fan regulators to be measured and paid for separately. 2. All chases will be cut by chase cutter only.

Description all as per item No 82.00 here in before but for socket out let point 5 Amps on same board, complete all as specified and directed.

Description all as per item No 82 here in before but for socket out let point 5 Amps on independent board, complete all as specified and directed.

All as per srl item No 82 here in before but point wiring for one socket out let 15 & 5 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor, complete all as specified and directed.

Supply and fix in repair modular switch 1 way 6A, 1 module , 230 volt , AC supply, , complete all as specified and directed.

Supply and fix in repair modular switch 1 way, 16A,1 module, 230 volt , AC supply, , complete all as specified and directed.

Supply and fix in repair modular socket outlet 6A-2/3 Pin combined 2 module, 230 volts ,, complete all as specified and directed.

Supply and fix in repair modular socket outlet 6/16-2/3 pin combined 2 modules, 230 volts ,, complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified.

Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings,complete all as specified.

Supply and fixing of LED light fitting 1x20W , 220V,not less than 100 lumen per watt, AC batten type with driver , holder including 20W LED tube light for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specifid and directed. Note: LED cool white/warm white must get approved from engineer-in-charge.

Supply and fix batten type with surface mounted LED tube light fitting with high efficient diffuser mirror light, polycarbonate housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed.Note: LED cool white/warm white must get approved from engineer-in-charge.

Supply and fixing in repair sheet metal enclosure SP with two pin and earth plug and socket with one single pole, MCB 20 Amps, 'C' curve, 240 volts complete all as specified and directed.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 2.5 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.5 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed.NOTE:-3 run of 2.5 sqmm cable with concealed conduit shall be measured as 1 unit.

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 4.0 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 4.0 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed..NOTE:-3 run of 4.0 sqmm cable with concealed conduit shall be measured as 1 unit.

Supply , insatallation, testing of SPN distibution board 8 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles.Note: (i)Painting shall be done with powder coated finish.(ii)PU(polyurethene) gasket shall be used in DB, complete all as specified and directed.

Supply , insatallation, testing of SPN distibution board 4 way,double door , IP 43 , as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles.Note: (i)Painting shall be done with powder coated finish.(ii)PU(polyurethene) gasket shall be used in DB, complete all as specified and directed.

Supply and fixing MCB SP single pole, 240 volts, 50 Hz, breaking capacity ,6 to 32 Amps, , complete all as specified.

Supply and fixing MCB SPN 16 -32 Amps rating ,240 volts, 50 Hz, breaking capacity 10 KA complete all as specified and directed.

Supply, installation and testing of storage type heater (Geyser) of 25 Litres Capacity, vertical type to sustain high pressure upto 8 bars with fixing bolts / fastener, necessary PCC/cement work and making good the disturbed surfaces to match with existing surface giving electric and water connection, with temperature resistent SS braided pipe suitable to sustaine pressure up to 8 bar not less than 60 Cm long suitable for incoming / out going water connections and testing after installation to entire satisfaction of the Engineer-in-Charge complete with following specifications : - (a) 5 Star rated (Vertical type) Necessary BEE cerificate from OEM shall be produced by the contractor at the time of sample approval. (b) Metal Body, (c) Glass line coated tank (Ferro-glass technology) / Polymer coated. (d) Incoloy glass coated heating element. (e) Adjustable thermostat. (f) Temperature indicator dial/digital type. (g) Multiple Heating Option. (h) Multiple Functional Safety Valve. (j) Thermal Cutout Capillary Type. (k) In built protection for overheating/over pressure. NOTE : - Warranty certificate to be produced by the contractor from OEM for the following components before processing the bill. (a) For product - 02 Years Warrenty (b) For metal tank 07 years Warrenty.

Supply and fixing exhaust fan,Steel body, AC singal phase, 240 volts of size upto 300 mm ,with four blades,frame and louvers and cutting & making hole in wall of suitable size in round/square shape for fixing exhaust fan of size upto 300mm sweep and making good with plaster/matching with existing surface complete all as specified and directed.Note: The rate of making hole (square/round) in wall if required is deemed to be included in unit rate quoted.

Re-fixing Exhaust fan of any size/make after minor repair, servicing and greasing including painting complete all as specified and directed by Engineer-in-Charge.

Re-fixing Geyser of any capacity and make for servicing and replacement of defective parts including painting two coats of white duco paint on same or other location after making & functional and making water connection of inlet/out pipe complete all as specified and directed

Supply and fixing automatic touch free infrared hand dryer(stainless steel body) not less than 1000 watts rated power and carbon brush motor,wall mounted ,230 V,50 Hz ,single phase AC,quick response with sensing distance 15-20 cm,air speed 60 m/sec complete accessories all as specified and directed.Note:Make-Jaquar/hindware or equivalent as approved by GE.

Supply and fixing automatic Soap dispenser,aluminium/ABS finish,wall mounted 0.8 L capacity,1.0 to 2.0 ml dispensed per pulsation,sensor based(control circuit with infrared detectors) with complete accessories and powered by 6 Pcs of alkaline AA(1.5V) batteries all as specified and directed.Make-Jaquar/Hindware or equivalent as approved by GE.

Supply , install, testing & commisioning complete wall mounted split type air conditioner electric driven 2 TR capacity ,5 Star rated with cooling and heating (hot and cold) type suitable to operate ,230 volts,50 HZ single Ph including all necessary connections incoming & out going drain pipes & 3 core flexible cable connections with mounting stand indoor& outdoor complete as directed.

Supply and fix voltage stabiliser for automatic operation,single phase naturally air cooled type and designed for input variation between 170 volt to 270 volts with accuracy of 2.5% and of capacity 5.0 KVA complete all as specified and directed.

NOTE:- Amount of credit of Rs. 62,123.00 for retrieved materials is mentioned in Schedule of Credit Page No 21.00 & 22.00 of tender documents in pdf form which will be deducted offline while acceptance of tender.

Swastik Builders (BID ID -3490174)

Ashwani Kumar (BID ID -3490732)