Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Clearing and grubbing road land including uprooting rank vegetation grass bushes,shrubs,sapling and trees girth up Rupees TwentyEight Thousand

1 0.62 to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable materials (C) By mechanical 28,455.09 Four Hundred FiftyFive Paise Hec

means in area of light jungle Nine Only

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished iron J or L Hooks, Bolts and nuts 8mm

Rupees Seven Hundred

2 143.00 diameter with bitumen and G.I. limpet washer or G.I. limpet washer. filled with white lead complete excluding the 734.19 Sqm

ThirtyFour Paise Nineteen Only

cost of purlins, Rafters and Trusses.(1) 0.80 mm thick sheet.

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off Rupees One Hundred

3 2287.77 the excavated stuff upto 50 Meter lead.(A) Loose or soft soil 122.94 TwentyTwo Paise NinetyFour Cum

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off

Rupees Two Hundred SixtyEight

4 2922.92 the excavated stuff upto 50 Meter lead.(C) Hard Murrum 268.92 Cum

Paise NinetyTwo Only

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and Rupees Two Hundred

5 445.54 disposing off the excavated stuff upto 50 Meter lead. (C) Hard Murrum 287.21 EightySeven Paise TwentyOne Cum

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. In layers not

Rupees One Hundred ThirtySix

6 5656.23 exceeding 20 cm. in depth consolidating each disposited layer by ramming and watering. 136.92 Cum

Paise NinetyTwo Only

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete

Rupees Four Hundred

EightyOne Paise Eighty Only

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering,

Rupees Three Hundred One

8 35670.33 ramming and consolidating etc. complete. 301.78 Cum

Paise SeventyEight Only

Applying general insecticide pest control treatment to floors, cupboards etc including labour materials etc.

complete. Using Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by mass) is recommended

Rupees ThirtyNine Paise Nine

9 1570.79 10.5ml chemical diluted with 5 liters of water application 0.5 litre chemical /Sqm of surface is recommended as 39.09 Sqm

per I.S. (The Product Performance Shall Carry Guarantee for 10 years )

P.C.C : Providing and laying cement concrete 1:2:4 (1-Cement : 2- Coarse sand : 4- graded stone aggregates 20 mm Rupees Three Thousand Nine

10 823.65 nominal size) and curing complete including cost of formwork in (A) Foundation and Plinth 3,979.23 Hundred SeventyNine Paise Cum

TwentyThree Only

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of Rupees Five Thousand One

11 818.11 reinforcement for reinforced concrete work in M250 all RCC element like foundation, 5,128.32 Hundred TwentyEight Paise Cum

(A) Footing, at all floor level from below plinth and above plinth level ThirtyTwo Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Six Thousand Eight

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

12 210.10 6,872.94 Hundred SeventyTwo Paise Cum

reinforcement for reinforced concrete work in M250 all RCC element like,

NinetyFour Only

(B) Walls, from top of foundation level all floor level

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Six Thousand Six

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

13 1372.72 6,672.41 Hundred SeventyTwo Paise Cum

reinforcement for reinforced concrete work in M250 all RCC element lik, © Slabs all floor level.

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Six Thousand Three

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

14 780.31 6,389.10 Hundred EightyNine Paise Ten Cum

reinforcement for reinforced concrete work in M250 all RCC element lik © Beams all floor level.

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

Rupees Seven Thousand Four

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of

15 216.70 7,420.17 Hundred Twenty Paise Cum

reinforcement for reinforced concrete work in M250 all RCC element lik © Landing, Stair case, Lintels and

Copping all floor level.

Providing and laying controlled cement concrete M.250 concrete With all lead, including all transportation,

pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding the cost of Rupees Six Thousand

reinforcement for reinforced concrete work in M250 all RCC element lik (D) Columns, Pillars posts and struts, all FourtyFive Paise Twelve Only

GRADE SLAB (M200) : Providing and laying controlled cement concrete M.200 Concrete with all lead, including all

transportation, pumping, pouring, curing of concrete etc complete including the cost of formwork but excluding Rupees Five Thousand Eight

the cost of reinforcement for reinforced concrete work in M200 Grade Slab Paise SeventySeven Only

Constructing Under Ground water tank with Providing and laying controlled cement concrete M250 mix for R.C.C.

work including reinforcement, boxing, centering, vibrating, curing and mixed with approved water proofing

cement compound or "CEMWET" or "PIDICRETE LW" integral water proofing admixture as water proofing agent to

be mixed with 50 kgs. bags shall be as recommended by the manufacture of the water proofing material, concrete

work for top, bottom slab & side pardi, column, beam for under ground water tank item incl. 300mm Free Board

and Necessary excavation & refilling the available earth, raft thickness 250mm & wall thickness 230mm .,

Sunctipn Pit size 600mmX600mmX600mm water proofing cement plaster 20mm thick Double Coat with smooth Rupees Fifteen Paise SixtyNine

18 200000.00 finishing & Glazes tile Dedo, vata 10cm X 10cm , 50mm thick cement concrete flooring watering etc. Comp. to all 15.69 Litre

face of tank. including locking arrengement outlet, inlet, overflow and washout outlet pipe arrengement as

necessary & C.I. Cover 0.60 x 0.45 weight not less then 35 kg with locking arrengment.C.I. steps etc. and also The

columns of the pump room are also located up to the ground level, which will be considered as per structural

detail drawing Including thermo Mechanically treated bars (TMT BARS) Fe 500/500D as directed by Eng-in-charge.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a

mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in

Rupees Two Thousand Two

uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power

19 542.34 2,299.70 Hundred NinetyNine Paise Cum

roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With

material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a

mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in

uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power Rupees Two Thousand Four

roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With Hundred Sixteen Paise Five Only

material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix

macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying Rupees Two Thousand Four

21 471.60 in uniform layers with mechanical averfinisher in sub- base / base course on well prepared surface and compacting 2,407.33 Hundred Seven Paise Cum

with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and ThirtyThree Only

directions of Engineer-in-Charge.

TRIMIX Road (M200) : Providing & Laying M200 grade controlled cement concrete without fly ash trimix usinng

P21 (water reducing concrete admixture at 100 ml per bag of cement & recon 3 s fiber at 125 gm per bag of

cement including Cutting, Filling, Rolling, consolidating and Shuttering of C channel required to maintain level,

slope and thickness of the concrete road leveling of placed concrete with surface vibrator and finishing with power Rupees Six Thousand Four

22 471.60 floater & trowel light brooming the surface & including Construction joints to be formed at every 5 mt distance by 6,455.60 Hundred FiftyFive Paise Sixty Cum

grooving with mechanical saw within 48 hrs. Groove/sawed joints shall be made of 5 mm width and depth min Only

(1/3 rd depth of the pavement) as shown in the drawing and shall be filled with ready to use PU sealant of UV

gradecutting & filling of expansion joint as directed by Engineer in charge

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position Rupees SeventySeven Paise

complete. TwentyNine Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Rupees Four Thousand Two

24 185.09 foundation and plinth, in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (B) Conventional 4,214.33 Hundred Fourteen Paise Cum

ThirtyThree Only

Brick work using common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in

foundation and plinth, all level in Cement Mortar 1:6 (1- Cement : 6 -fine sand), Extra for brick work in Rupees Four Thousand Five

25 1967.26 superstructure above plinth level upto floor two level & all floor level (B) Conventional 4,538.48 Hundred ThirtyEight Paise Cum

FourtyEight Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Half brick masonary in common burnt clay building bricks having crushing strength not less than 35 kg./Sq.Cm. in Rupees Six Hundred

26 180.00 foundation, plinth and superstructure in Cement Mortar 1:4. (1- Cement : 4 -fine sand) (B) Conventional 629.84 TwentyNine Paise EightyFour Sqm

Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two

level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand), interior plastering above floor Rupees One Hundred

two level for every additional storey height. all type of scaffolding , tools, tackles etc complete. (For all floor) SixtySeven Paise FiftyFour Only

Providing 20 mm thick double coat mala cement plaster on interior and external brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in Rupees Two Hundred

28 5689.54 rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel 283.95 EightyThree Paise NinetyFive Sqm

including all level, scaffolding, curing, tools, tackles etc complete. ( For all floor ) Only

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior

plastering upto floor two level and finished even and smooth in (iii) Cement mortar 1:6 (1-cement:6-sand) interior Rupees One Hundred

29 17755.49 plastering above floor two level for every additional storey height. all type of scaffolding , tools, tackles etc 174.06 Sqm

SeventyFour Paise Six Only

complete. (For all floor)

Providing and applying external finish of average 2 to 2.5mm thick acrylic polymer based texture and pattern with

standard tool and applicator as specified by manufacturer on exterior surfaces at all heights including scaffolding

to give even shades including thoroughly brushing the surfaces free from mortar droping and other foreign matter

and sand paper smoothed etc. complete as per the manufacture specifications and up to the satisfaction of Rupees Three Hundred One

Engineer in-charge/ Architect. The rate includes making of grooves, pattas and finishing as directed by Architect/ Paise NinetyNine Only

EIC. Paint shall be measured and paid in seperate tender item. (Item should be executed by approved applicator

Providing and fixing G.I. hexagonal chickenmesh of size 16 x24 of 22 gauge at junction of concrete and brick work

or between different materials after making "V" grove between two different material surface and filled with rich

cement mortar and @ 100mm on each side of surfaces including necessary "U" nails / screws / washers with Rupees Two Hundred

31 2444.79 cleats for fixing, overlaps, scaffolding at all floors / all levels / all heights / all shapes etc. complete as per drawing 232.79 ThirtyTwo Paise SeventyNine Sqm

/ specifications and direction of Engineer-in-charge. For civil, plumbing, electrical & infrastructure works. Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC

structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water

treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral

crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for

horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The

material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by Rupees Four Hundred Six Paise

more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on FiftyThree Only

negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work

shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product

performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per

Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 mm broken pieces of

glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out

upto surface using white cement including rounding off junctions and extending them upto 15 cm along the Rupees Seven Hundred

wall,clearing with water and oxalic acid etc. as directed. (The Product Performance Shall Carry Guarantee for 5 SeventyNine Paise Seventy Only

Years Against Any Leakage.)

Water proof plaster : Providing 15 mm thick water proof cement plaster in single coat on brick/ block masonry or

RCC wall, at all heights, finished even and smooth in CM 1:3 (1 cement : 3 sand) including providing and mixing

water proofing materials of approved make in recommended proportions by manufacturer and as directed by Rupees Two Hundred Three

Engineer-in-charge and finishing the surface wired finish to receive the tiles/ smooth finish with a floating coat of Paise SeventyTwo Only

neat cement slurry at 2.75 Kg/ sqm etc. complete at floor

RCC precast M.H. Frame & Cover : RCC precast M.H. Frame & Cover Manufacture, supply & Delivery at store or

at site of work precast RCC M.200 Frame & cover suitable to drainage M.H. and as per type design & Drawing Rupees Two Thousand Three

35 8.00 including cost of reinforcement M.S. Angles or Flat, curing mold work etc. (Heavy duty), 1) Frame suitable for 2,316.94 Hundred Sixteen Paise Nos

50cm opening of MH NinetyFour Only

2) Cover suitable for 50cm opening of MH (Rate : 1121 + 1173 = 2294/Nos)

Providing and fixing Cast Iron (C.I.) steps/rungs of approved quality, medium/heavy duty, with a minimum weight

as per approved design, confirming IS code specified including embedded anchor/holdfasts in the Reinforced

Cement Concrete (R.C.C.) wall or brick masonry, complete with necessary fixing and finishing as per standard Rupees One Hundred

36 32.00 design and drawings, Fixing C. I. steps in masonry in C. M. 1:3 & MS Febrication work including necessary C.C. for 128.95 TwentyEight Paise NinetyFive Nos

jointing, welding etc. complete during progress of the work. Dimension C.I. steps 50cm x 15cm. 2.25cm) (Rate : Only

111.02 x 15% Contractor Profit = Rs, 127.67)

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Vitrified Flooring (Type - 01) : P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material Rupees One Thousand Two

37 2585.00 including dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing 1,264.41 Hundred SixtyFour Paise Sqm

& cleaning the surface etc. complete for light shade FourtyOne Only

Vitrified (Type - 01) : Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting risers of steps and Rupees One Thousand One

38 102.87 dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry 1,195.02 Hundred NinetyFive Paise Two Sqm

Flooring (Type-02) : P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including Rupees One Thousand Four

39 1037.92 dismentaling of existing flooring and jointed with color cement slurry including finised with flush pointing & 1,467.72 Hundred SixtySeven Paise Sqm

cleaning the surface etc. complete for antiskit SeventyTwo Only

Providing and laying white glazed tiles 6mm/8mm thick in skrting risers of steps and dedo on 10mm thick cement Rupees Nine Hundred Paise

plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry TwentyNine Only

Vitrified Flooring (Type-03) : Providing and laying Lapato / Glossy/Matt/Rustic finish Vitrified tiles flooring using

minimum 10 mm thick tiles as per approved make list or selected by Architect , tile size (800 mm X 1600mm)

including preparing base for leveling with 20mm thick cement mortar 1:6 (1 cement : 6 coarse sand ) and jointed Rupees One Thousand Six

41 981.52 with 3mm thick laticrete grouting of approved shade and colour in proper line and level as per detailed drawing / 1,615.21 Hundred Fifteen Paise Sqm

instruction and approval by architect.The rate shall be inclusive of protecting the flooring by plaster of Paris and TwentyOne Only

plastic and/or bubble top sheets. (At all floor area)

Tile (Type-03) : Providing and laying Lapato /Glossy finish vitrified tiles in skirting, riser of steps and dedo using

minimum 10 mm thick vitrified tiles of approved make list or as selected by Architect of premium quality fixed in Rupees One Thousand Seven

42 96.83 skirting, etc. on 10 mm thick Cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with 3 mm thick laticrete 1,739.89 Hundred ThirtyNine Paise Sqm

grouting of approved shade and colour in proper line and level for average 125 mm height as per detailed drawing EightyNine Only

/instruction and approval by architect. ( At all floor area)

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement Rupees One Thousand

43 464.78 slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm 1,019.39 Sqm

Nineteen Paise ThirtyNine Only

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to Rupees One Thousand One

match the shade of slab including rubbing and polishing etc. complete. Hundred Nine Paise Seven Only

Providing and laying Granite slab (16 to 18 mm thick) one side polished flooring over 20 mm (average) base of Rupees Two Thousand Three

45 749.87 cement mortar 1:6 ( 1 cement : 6 coarse sand) or L.M. 1:1.5 laid and jointed with grey cement slurry including 2,354.13 Hundred FiftyFour Paise Sqm

rubbing & polishing complete, for all floors. Thirteen Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and laying 16 to18 mm thick polished Granite stone slab machine cut in single piece in risers of

steps, dedo, pillar, sill and jambs or dedo laid on 10 mm thick cement mortar 1 : 3 ( 1 cement : 3 coarse sand )

Rupees Two Thousand Four

laid over and jointed withgrey cement slurry incl. rubbing and polishing etc complete. The rate includes lodding,

46 625.25 2,443.81 Hundred FourtyThree Paise Sqm

unlodding, scaffolding, wastage, making hole, cutting/ chasing, rounding champhering, edge polishing of edges.

The work shall be carried out as per the approval of architect and engineer-in-charge. for all floors

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of

concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 Rupees Seven Hundred Six

: 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per Paise NinetyThree Only

guidlines of IRC : SP 63-2018 etc. Complete.

Kerb Stone : Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm

Rupees Three Hundred

length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for

48 1033.03 374.92 SeventyFour Paise NinetyTwo Rmt

fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Urinal partition : Providing & laying 16 to 18 mm thick both side mirror polished granite of approved shade and

quality, seleted and sorted for uniform color for urinal partition/ division plate as per design and in required sizes

and shapes after chasing /cutting of dado with cutter machine fixing shall be carried out in white cement sand Rupees Two Thousand Five

49 7.81 mortar (1:1) with matching pigment and/ or necessary adhesive. (Only finished granite work shall be measured). 2,590.87 Hundred Ninety Paise Sqm

All expose edges shall be champhered and polished. The rate includes making hole, cutting/ chasing, rounding EightySeven Only

champhering, edge polishing of edges. The work shall be carried out as per the approval of architect and engineer-

Basin Counter/Granite Platform (All Floor : Width - 600 mm ) : Providing and constructing approved shade and

sample of Mirror finish granite platform , 600mm width 25 mm thick Machine polished kotah stone as vertical

supports at sides,including cutting granite & kotah as per required shape , dedo 1'6" ht & size to fit kitchen sink, Rupees Five Thousand Three

50 112.04 moulding, tiles adhesive nosing, chamfered front edges, fixing, disposal of debris etc complete with all labour and 5,369.95 Hundred SixtyNine Paise Sqm

materials and as per detailed drawings / architects instruction and approval by Engineer-in-charge. The sample NinetyFive Only

mock shall be approved from EIC.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

PANTRY BELOW STORAGE 600DX700/750H : Providing, making, fixing as per detail drawing made from 19 mm IS

710 BWP ply structure aand both side 1.5 mm thick laminate finish shall be of approved make & shade and as per

the detail drawing. All the edges of ply shall be covered with 1.5 mm thick laminate finish Rate shall also inclusive

of all necessary brass satin finish nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm tower

bolts, ball catches/Magnet, The rate shall be inclusive of shelf both side 1.5 mm thick laminatefinish and as per

detail drawer unit for kitchen basket as per selction by architect The rate shall be in sqm of elevation area for all

Rupees Four Thousand Nine

floors and at all heights including all costs complete as per the Architectural drawings & instructions.Only the

51 3.50 4,976.19 Hundred SeventySix Paise Sqm

elevation area of the storage unit will be measured and paid for. Item for 1.5 mm thick laminate fixing and

polishing is included in this item. The work shall be measured & paid in sqm The rates shall be inclusive of all

wastages, material, labor, taxes, transportation, loading, unloading, fixing in position, etc. complete to the

satisfaction of the Architect and EIC. The mock-up of 1 unit shall be approved from EIC and Architecture prior to

the final production. (at all floor)

PANTRY ABOVE STORAGE 600DX800 H : Providing, making, fixing as per detail drawing made from 19 mm IS

BWP ply structure aand both side 1.5 mm thick laminate finish shall be of approved make & shade and as per the

detail drawing. All the edges of ply shall be covered with 1.5 mm thick laminate finish Rate shall also inclusive of

all necessary brass satin finish nickel plated/S.S 304 grade hardware like Hinges, locks,6"handle , 75 mm tower

bolts, ball catches/Magnet, The rate shall be in sqm of elevation area for all floors and at all heights including all

costs complete as per the Architectural drawings & instructions.Only the elevation area of the storage unit will be

measured and paid for. Item for 1.5 mm thick laminate fixing and polishing is included in this item. Approval of all

loose material (sample of materials to be used) & raw manufacturing to be got approved in advance from EIC & Rupees Ten Thousand Seven

52 4.00 Architect prior to the final production of the work. Manufacturing shall in parts or as whole as per the 10,741.77 Hundred FourtyOne Paise Sqm

requirements & or assembled at site as per the requirement and directed by EIC & Architect. All material to be SeventySeven Only

used shall be as per the drawings & confirm to the relevant detailed material specifications of this document. The

work shall be measured & paid in sqm The rates shall be inclusive of all wastages, material, labor, taxes,

transportation, loading, unloading, fixing in position, etc. complete to the satisfaction of the Architect and EIC.

The mock-up of 1 unit shall be approved from EIC and Architecture prior to the final production. (at all floor)

Concrete flooring : Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded

Rupees Three Hundred

53 521.71 stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm 339.08 Sqm

ThirtyNine Paise Eight Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Gypsum Ceiling : Providing and fixing single layer water proof gypsum board 12.5 mm thick sections using water

proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm

Rupees Six Hundred Six Paise

54 491.81 x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & 606.95 Sqm

NinetyFive Only

drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on

ceiling incl. making necy. opening for light fitting,diffuser etc. comp. as per detail drawing as directed.

PLY WALL PANELING FINISH WITH VENEER FINISH : Providing & fixing 12mm thick IS 710 MR Grade ply fixed on

frame work. The framework shall be fixed as per drawing vertically & @ 600 mm c/c vertical & 1200 mm c/c

horizontally. The frame work shall be made from Aluminium section make JINDAL/HINDALCO or equivalent

conforming to IS specification In paneling, (intermediate, perimeter ) & (at vertical or horizontal joint of ply & at

turning point ) shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-

shield /Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings

of teak wood /MS washers to ensure right angles and plumb level. All ply/wooden frameworks shall be treated

with anti-termite treatment & hidden The framework shall be covered with approved make plywood(IS 710-

mm ply),adhesive ,tape, headless nails etc ,finished with Veneer ( veneer base 4 mm thick ply) with semiglossy

PU polish & in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as Rupees Three Thousand Five

55 28.52 directed by Employer's representative/ Employer. The rate shall be in Sq.mt of actual paneling work for all floors, 3,502.57 Hundred Two Paise FiftySeven Sqm

at all heights, all shapes .Rate shall inclusive of all material ,labor scaffolding, tools, tackles, for all heights and Only

for all levels, Rates shall also be inclusive of cost of making cut outs/ openings for electrical fixtures, tube

lights /air-conditioners ,grills, diffusers etc & providing additional sections for strengthening around the

openings/cutouts, making grooves between wall & board or as per drawing /instruction of Employer's

representative/ Employer. and no extra payment shall be considered for additional sections provided. All curved

surfaces, recesses, waffles shall be part of the paneling including openable shutter wherever required area and

finish with the same material. Rate shall be inclusive of all item inclusive part of paneling Only the clear elevation

area shall be measured and paid.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

False ceiling : Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge &

15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall be

of approved texture Fine fissured/Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of

hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum)

sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200X600mm and secondary

cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle

of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter Rupees One Thousand Six

56 537.35 wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl 1,674.15 Hundred SeventyFour Paise Sqm

plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Fifteen Only

Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone) in

the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors

etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size

25X35X1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.I. adjustable rods with

galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom

exposed with 24mm of all T-sections shall be prepainted with polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineer-in-charge.Note:- Only calcium silicate false ceiling area will be

measured from wall to wall.

No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium

silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for

Globe, light reflection 85% noncombustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the best thermal Insulation

Flush Door With WPC frame (34 MM) : Providing and fixing in position 35mm thick solid core wooden flush

doors of approved make having fire retardant ply facing on both sides and finished with 1 mm thick laminate as

approved , WPC frame size - 125 X 63 MM Well Quality Hardware system of Hinges , Boxer type door closer , Rupees Six Thousand Five

57 305.98 Door handle , Euro profile , lock ,Door stop . work complete including all type of hardware, fittings , fixtures etc 6,570.17 Hundred Seventy Paise Sqm

complete as per detailed drawings and specifications, sample mock shall be approved from EIC. Seventeen Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Flush Door with frame and finish with 1mm thick Laminate (37MM): Providing and fixing in position 35 mm thick

solid core wooden flush doors of approved make having fire retardant ply facing on both sides and finished with

1mm thick laminate as approved ,Indian Teak Wood Frame size - 125 X 75 MM, Single rebet , Well Quality Rupees Four Thousand Seven

58 382.54 Hardware system of Hinges , Boxer type door closer , Door handle , Euro profile , lock ,Door stop . work 4,750.42 Hundred Fifty Paise FourtyTwo Sqm

complete including all type of hardware, fittings , fixtures etc complete as per detailed drawings and Only

specifications, sample mock shall be approved from EIC.

Double Leaf Flush Door with frame and finish with 1mm thick Laminate (37MM) : Providing and fixing in

position 35 mm thick solid core wooden flush doors of approved make having fire retardant ply facing on both

sides and finished with 1mm thick laminate as approved ,Indian Teak Wood frame size - 250 X 75 MM double Rupees Four Thousand Eight

59 36.80 rebet , Well Quality Hardware system of Hinges , Boxer type door closer , Door handle , Euro profile, lock ,Door 4,899.17 Hundred NinetyNine Paise Sqm

stop. work complete including all type of hardware, fittings , fixtures etc complete as per detailed drawings and Seventeen Only

specifications, sample mock shall be approved from EIC.

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG

G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for

mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm Rupees Two Thousand

60 82.80 (minimum) alround the frame and fixing with dash fastener (including) of approved size and make, including 2,079.59 SeventyNine Paise FiftyNine Mtr

applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge. Only

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614

(Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door

frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG Rupees Eight Thousand Nine

61 27.60 G.I.sheet (zinc coating not less than 120 gm/m2), Including pannelingduly, filled FR insulation material and fixing 8,909.21 Hundred Nine Paise TwentyOne Sqm

with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire Only

resistant primer etc. all complete as per direction of Engineer-in-charge

Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of Rupees Nine Thousand Eight

62 2.40 the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. 9,815.18 Hundred Fifteen Paise Eighteen Each

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing factory made upvc fenesta wooden colour sliding glazed window with Mosquito net and

Approved sample by Architect/Client/EIC. all height dimension comprising of upvc multi chambered frame with in

built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanizd mild steel section

made from roll forming process of required lenght ( shape & size according to upvc profile ), appropriate

dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket,wool pile,zinc alloy (white

powder coated) touch locks with hook,zinc alloy body with single nylon rollers (weight bearing capacity to be

kg),g.i. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile

of frame & sash shall be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware's Rupees Twelve Thousand Four

and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with Paise Ten Only

weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per

approved drawing & direction of engineer-in-charg. two track two panels sliding window of 5 mm thick toughen

glass and series 2000 frame 65 x 58 mm & sash 45 x 90 mm both having wall thickness of 1.9+ 0.2 mm and single

glazing bead of appropriate dimension.

Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x 1.2mm (Jindal

Rupees One Thousand One

Section:2434, @ Wt. 0.643 Kg/mt) with colour Powder Coated alluminium frame for ventilation with 5mm thick

64 19.80 1,175.56 Hundred SeventyFive Paise Sqm

frosted glass as details etc complete for Ventilation. All Level

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required

Rupees One Hundred Six Paise

65 4981.60 spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. 106.23 Kg

TwentyThree Only

Glass Partition With Aluminium Frame : Providing and fixing in position Full height 10mm thick toughened clear

glass partition (as per approved sample) using Saint Gobain or equivalent glass to false ceiling height ply boxing to

hold glass at top & Aluminum Profile(section as per design) at Four side (Periphery) & horizontal & Vertical

section of approved make, sample as per architect's instruction and as per detail drawing. Fixed panels of 10mm

thick customized clear toughened glass, edge polished fixing with necessary cutting of glass as per drawing &

specifications including providing and fixing EPDM quality rubber for aluminum sections / filling transparent

neutral cure glazed & metal silicon sealant of approved make on the periphery of the glass & wood etc Each glass Rupees Two Thousand Two

66 50.13 panel secured to the ply box at top and Aluminium Profile .Item includes all necessary fitting / fixing etc. complete 2,279.63 Hundred SeventyNine Paise Sqm

as per drawing, approval and instructions of the Architect. NOTE: Partition ht will be measured from finish floor to SixtyThree Only

false ceiling level only. The rate shall be in sq.mt for all floors and at all heights including all costs. The rates are

also inclusive of necessary scaffolding, ply box beam, tools, tackles, scaffolding etc complete. Glass width size

shall be as per sugestion by Employer's representative/ Employer. including cost for wooden beam for supprot for

glass partition

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Glass Door with Aluminium Frame corner hinge system with pivot door : Providing and fixing in position full

height 10 mm thick toughened clear glass door with all necessary Geze , Dorma hardware accessories as per

approved selection by Architect. 10mm thick Saint Gobain or equivalent make customized clear toughened glass,

edge polished prepared with stainless steel patch fittings with locking arrangement / fixing Each glass panel

secured to the floor by stainless steel patch fitting item includes all necessary fitting / fixing, fixtures- like Geze / Rupees Fifteen Thousand Three

67 9.20 Kich/Dorma or equivalent Hardware system like ( Corner hinges with pivot Glasklar Lock - , Door Handle Keys 15,308.13 Hundred Eight Paise Thirteen Sqm

,round shape lock with alluminium cover - ,Door Stop complete as per specification drawing approval and Only

instructions of the Architect. Rate shall be inclusive of all material loading unloading at all height and all

floor.sample mock shall be approved from Employer's representative/ Employer.

Wall Mirror with wooden frame : Providing and fixing 6 mm thick mirror of Saint Gobain/ASAHI INDIA SAFETY/

MODIGUARD or other approved make shall be fixed on 12mm thick IS 710 ply and 6mm thick MDF with

necessary adhesive, double side tape, screw etc. First class Battens patti framing with water base PU polish shall Rupees Four Thousand One

68 34.65 be fixed at periphery of mirror with Stud 25x50 mm Stainless Steel. Provision shall be made for conceallled light 4,160.20 Hundred Sixty Paise Twenty Sqm

work as per detailed drawing / instruction of architect complete. Rate shall be inclusive of all material loading Only

unloading at all height and all floor. sample mock shall be approved from Employer's representative/ Employer.

Collapsible Door : Providing and fixing in position collapsible steel shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size with top and bottom rails of T_rin 40x 40 x 6 mm with 38mm dia, Rupees Six Thousand One

69 6.91 steel pulleys complete with bolts, nuts, locking arrangements, stoppers handles including applying a priming coat 6,116.59 Hundred Sixteen Paise FiftyNine Qui.

of red lead paint. Only

Providing and fixing S.S. bird net jali - using wire gauge with average width of aperture 1.4 mm in both directions

with wire of dia. 0.50 mm all complete With Aluminium equal angle frame or 12 mm mild steel U beading work at

required opening and at any height with all labour & material etc. complete. and fitting with necessary nuts, bolts, Rupees One Thousand Three

70 2147.28 machine screws etc fixing i/c fixing with necessory accessories and dash / Anchor fasteners of required size. on 1,303.60 Sqm

Hundred Three Paise Sixty Only

the top of floors, concretes, wood, walls, sides of slab with suitable arrangements. etc complete for all floors and

Wall Punning : Providing and applying Plasto XP Gypsum plaster ( USG Boral) or equivalent make , minimum

mm thick in Wall and minimum 6 mm thick in ceiling , including all labors, tools, tackles, scaffolding, surface

preparation, mixing of material, transportation (lead & lift) applying in position, Levelling, finishing, cleaning etc.

complete to satisfaction of Employer's representative/ Employer. The rate also include making of grooves above Rupees Three Hundred

skirting, Dedo tiles and around window and door jambs etc. (cost of Bonding agent to the ceiling or RCC surfaces is SixtyFive Paise SixtyTwo Only

to be included in the item).item shall be used as per instruction of EIC.

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to

Rupees Fourty Paise FiftyNine

72 24447.88 give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter 40.59 Sqm

and sand papered smooth.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall

Rupees EightyTwo Paise

73 24447.88 surface to give an even shade including throughly brushing the surface free from mortar droppings and other 82.85 Sqm

EightyFive Only

foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape

Rupees One Hundred Twenty

74 3413.72 even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. etc 120.26 Sqm

Paise TwentySix Only

Applying priming coat over new steel and other metel surface after and including preparing the surface by

Rupees ThirtySix Paise

75 365.36 throughly cleaning, oil, grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers 36.74 Sqm

SeventyFour Only

and sand paper with ready mixed priming paint brushing red lead.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel Paint, brushing,

Rupees NinetyTwo Paise

76 365.36 interior to give an even shade including cleaning the surface an even shade including cleanicn the surface of all 92.20 Sqm

dirt, dust and other foreign matter.

Texture paint ( Insider and outside) :Wall painting two coats with low VOC Jotashield Tex Ultra of Jotun or

equivalent approved brand in any shades and colour as directed on wall surface to give an even shade including

applying of a one coat of Penetrating prmer or equivalent and two coats of paint, scaffolding to at any height with

all labour and material thoroughly brushing the surface free from mortar droppings and other foreign matter and

sand prepared smooth etc. complete. The substrate must be sound, clean, dry, free from dust, oil, grease and

laitance etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must

be removed by stiff bristle brushing. The primer / paint application is to be done with the rollers. rate shall be

Rupees Six Hundred

including crack filling and levelling as per manufacturers specfication. Top coat should have.

77 39.31 687.38 EightySeven Paise ThirtyEight Sqm

1) Low VOC content.

2) Crack Bridging ability upto 2.6 mm.

3) 100% pure acrylic emulsion

4) Anti-Carbonation concrete protection

5) Very Low Flame spread

6) Superior Washability. ( At all floor)

Steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a

Rupees Nine Thousand One

priming coat of red lead paint. (A)In beams and joists, channels angles Tees, flats, with connecting plates or angle

78 17.77 9,108.48 Hundred Eight Paise FourtyEight Qui.

cleats as in main and cross beams. Hip and jack rafters, purlins conneted to common rafters and the like

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing, fabricating, assembling, hoisting/ erecting and fixing in position MS Rolled Steel Sections, ISMB, ISMC,

Hollow sections, Tubular Sections, MS Plates, Chequered Plates, MS Pipes, Perforated Sheet, deep threaded MS

bolts, threaded J bolts, insert plate, support plate etc at all heights/ all levels/ all floors/ all shapes & sizes with all

leads & lifts as per drawing and direction of engineer incharge. all confirming to latest relevant IS codes for the

workmanship of steel structures like staircases, railings, handrail, jali, gates, grills, bracings, platforms, brackets,

monkey ladder, cattle trap, false ceiling frame work etc. the Rate is including cutting, bending, bolting and welding

Rupees One Hundred

the members all as per structural drawings and as per detailed specifications (for materials & workmanship)

79 5031.18 121.96 TwentyOne Paise NinetySix Kg

including necessary scaffolding/ staging etc. complete in the situations described hereinafter. The rate shall

include dry sanding, degreasing (wet cleaning) & preparation of rustfree surface manually or mechanically, metal

putty to make the surface even and smooth, 2 coat zinc chromate yellow oxide primer and 2 coat of enamel

paint of approved shade of paint over all the surfaces of the steel sections or as specified in the drawing.

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of the

Rupees NinetyOne Paise

80 14.40 pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of removal of 91.70 Rmt

sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 50mm Diameter

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of the Rupees One Hundred SixtyTwo

81 14.40 pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of removal of 162.53 Rmt

Paise FiftyThree Only

sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 75mm Diameter

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of the Rupees Three Hundred Eight

82 14.40 pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of removal of 308.70 Rmt

Paise Seventy Only

sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 110mm Diameter

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing in position PVC pipe sleeves of 6Kg/cm2 and length as per design for following diameters for services

wherever pipes pass through walls/ slabs/ beam in mtrs length. All pipes shall be accurately cut to the required

sizes, laid as per drawing, kept in the position while concreting, and burrs removed before laying. Open ends of the Rupees Eight Hundred FiftyFour

83 14.40 pipe shall be closed as the pipe is installed to avoid clogging while concreting. Rate shall be inclusive of removal of 854.86 Rmt

Paise EightySix Only

sleeves before water proofing or grouting. For all floors / all levels / all heights. (a) 160mm Diameter

Core cutting : Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam

or any other RCC member without vibration by core cutting (diamond drilling) machine including scafolding,

safety majors, disposing the debris, cleaning for all levels/ all height as per structural consultant's drawing, after Rupees One Thousand One

84 112.00 approval of engineer in charge etc compete. Rate shall be inclusive of filling the hole with non shrink 1,126.66 Hundred TwentySix Paise Nos

grout/Chemical Anchoring in good manner. Measurement shall be taken for the depth of holes in running meter SixtySix Only

for specified diameter. Holes shall made by authorised approved agency. (a) holes from 100 dia.

Core cutting : Providing and wet drilling accurate and clean holes of specified diameter in RCC walls, slabs, beam

or any other RCC member without vibration by core cutting (diamond drilling) machine including scafolding,

safety majors, disposing the debris, cleaning for all levels/ all height as per structural consultant's drawing, after Rupees One Thousand Four

85 92.00 approval of engineer in charge etc compete. Rate shall be inclusive of filling the hole with non shrink 1,463.49 Hundred SixtyThree Paise Nos

grout//Chemical Anchoring in good manner. Measurement shall be taken for the depth of holes in running meter FourtyNine Only

for specified diameter. Holes shall made by authorised approved agency. (b) holes from 150 dia.

Providing and fixing anchor fastener system chemical based of Hilti or equivalent make for connections in

concrete as per design and drawings and/or as directed by engineer in charge. (Rate shall include cost of bolts,

labour, all material including chemical cartridge (wherever required). T & P for power drilling, cleaning the drilled

holes of loose dust by blowing air, insertion of chemical from cartridge with plastic nozzles as may be required, Rupees One Hundred

86 20.00 placing internally threaded sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, fastening 197.46 NinetySeven Paise FourtySix Nos

screw and tightening with nuts and check nuts etc may be required.Work complete including all type of tools , Only

tackles, scaffolding etc complete at any level and height. work complete as per the instruction of

EIC/Client/Architect.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing anchor fastener system chemical based of Hilti or equivalent make for connections in

concrete as per design and drawings and/or as directed by engineer in charge. (Rate shall include cost of bolts,

labour, all material including chemical cartridge (wherever required). T & P for power drilling, cleaning the drilled

holes of loose dust by blowing air, insertion of chemical from cartridge with plastic nozzles as may be required, Rupees Four Hundred

87 20.00 placing internally threaded sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, fastening 441.37 FourtyOne Paise ThirtySeven Nos

screw and tightening with nuts and check nuts etc may be required.Work complete including all type of tools , Only

tackles, scaffolding etc complete at any level and height. work complete as per the instruction of

EIC/Client/Architect.

Providing and fixing anchor fastener system chemical based of Hilti or equivalent make for connections in

concrete as per design and drawings and/or as directed by engineer in charge. (Rate shall include cost of bolts,

labour, all material including chemical cartridge (wherever required). T & P for power drilling, cleaning the drilled

holes of loose dust by blowing air, insertion of chemical from cartridge with plastic nozzles as may be required,

placing internally threaded sleeve, driving of bolts, 2 nos-4 mm thick (hot dip galvanized coated) washer, fastening Rupees Eight Hundred Thirty

screw and tightening with nuts and check nuts etc may be required.Work complete including all type of tools , Paise FourtySeven Only

tackles, scaffolding etc complete at any level and height. work complete as per the instruction of

EIC/Client/Architect.

SS RAILING : Providing and fixing stainless steel railing 50mm dia.(16 gauge-Grade 304) Top RAIL with Vertical and

Horizontal support Member 32mm dia and 16mm dia.(16 gauge-Grade 304), as per drawing, references image &

sample, mock up approved by Architect/EIC. Railing made of Hollow tubes, solid bar, channels, plates etc.,

including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with

necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel Rupees Two Thousand Nine

89 490.96 dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with 2,960.95 Hundred Sixty Paise NinetyFive Rmt

suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel Only

members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.). Contractor shall

prepare shop drawing based on design, and get approved. Sample/ mockup shall be approved by Architect.

Ply with Laminate finish frame work : Providing and fixing 12 mm thick IS 710 ply with 1mm Laminate finish

Rupees One Thousand Seventy

90 51.46 including all type of fixing,fittings, polishing etc complete as per suggestion of Architect. ( At all floor) 1,070.95 Sqm

Paise NinetyFive Only

CRCA Shutter : Providing and fixing of cupboard shutters made from prime quality CRCA MS sheet (Cold Rolled

Mild Steel sheet), conforming to IS 513 (part-1):2016 standards, of [0.8 mm to 1.0 mm] thickness. The complete

M.S. material of the shutter should be pre-treated (degreased, zinc phosphate,etc..) and epoxy powder coated for Rupees One Thousand Five

91 760.73 corrosion resistance, with a finish thickness of approximately 45-50 microns, in an approved shade/color. Includes 1,576.00 Sqm

Hundred SeventySix Only

all necessary fittings such as stainless steel butt hinges, lock, handle, and other accessories, complete as per the

direction of the engineer-in-charge. at All Floor Level

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Duct Door finish with cement sheet & frame : Providing and fixing in position 12mm thik ply all proof shutter &

Indian Teak Wood Frame of approved make having fire retadant ply facing on one sides and finished with 12mm

thick cement fiber board with interior Paint and inner side oil paint as approved , shutter fixed with floor of Rupees Two Thousand Six

92 46.08 approved make , lock & handle etc fixtures of approved make list with all necessary fittings etc. The rate 2,659.04 Hundred FiftyNine Paise Four Sqm

including of Aluminium frame of base (support) work complete as per detailed drawings and specifications. Only

sample mock shall be approved from Architect/EIC.

Providing & Fixing of new 10mm Multiwall Polycarbonate Sheets ( Lexan / Makrolon or equivalent ) over Vault

shaped Skylight Roof. The job includes sheets , Anodised aluminium sections like HEST1 & HESB1 containing EPDM

gaskets on both sides and all typs of fabrication alluminium section etc.. The sheet to be fixed as sandwiched

between HEST1 &HESB1 using Self Drilling & Self Tapping Screws ( Hilti /Corroshield or equivalent ). Edges / End Rupees One Thousand Seven

conditions of the sheets must be clamped with structure using anodized aluminium angles / ridges and SDScrews. Hundred Ninety Paise Five Only

Joineries of the sheets and screws must be filled with neutral cure silicon sealant etc complete as per directions of

EIC / Architect. (All Level)

Woodlot Paneling : Woodlot Premium NRC 0.88 with GI Studs. Supplying & Installation of WoodLot Premium FR

Grades 2430x131x16mm made of exterior grade MDF backed with acoustical Fleece providing sound absorption

of 0.88 NRC as per ISO 354.To be installed with 15mm Aluminium profile conforms to Aluminium Alloy 6063-T

6.Temper As per BS:1474-1987 and G.I Lock in clips on the back of tongue and Groove system. The density per

panel is 750-800 kg/m3.The panels come with tongue & groove for seamless patterns,4-28mm Groove and visible

panel. These slats are made from acoustical fibreboard with linear perforations for excellent uniformity. The Rupees Ten Thousand Three

94 248.74 perpendicular holes are available on the back of panel which are covered by black acoustical fleece. Achieves 10,373.12 Hundred SeventyThree Paise Sqm

sound reduction of 0.88 NRC. To be installed on Wooden Studs with a backing. 50mm thick,1000 GSM absorb Twelve Only

wool tested as per Fire Retardant ASTMD 635-1991/Insulation and IS 15061-2002 for excellent results. Ceiling

Level - Absorb Wool : 50mm thick,1000 GSM absorb wool tested as per Fire Retardant ASTMD 635-

1991/Insulation and IS 15061-2002 for excellent results.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Blackout curtains + Shear (manual) + Roller blind fabric with cover : should be made up of 30-35% Fiberglass,

65-70% Vinyl on Fiberglass, it should have specific low emissivity treatment and Lead free with Greenguard Gold

certification. Fabric approved by Melanoma International Foundation (MIF), it should cut UV rays with 97%

approximately and antimicrobial properties as per ASTM E 2180, ASTM G21, AATCC30 Part 3, ASTM D

GREENGUARD Gold and Bacteria Standard ASTM 6329; includes Microban antimicrobial additives. It should have

3% openness, fabric thickness should be 0.50-0.55 mm, fabric weight should be 478 grams per square meter, The

fabirc should be Flame retardant as per California U.S. Title 19 (small scale), NFPA 701 TM#1 (small scale), NFPA Rupees Three Thousand Six

95 408.78 101 (Class A Rating), IBC Section 803.1.1 (Class A Rating), BS 5867 Part 2 Type B Performance, NFPA 701 TM#2 3,658.73 Hundred FiftyEight Paise Sqm

(large scale), CAN/ULC-S 109 (large and small scale), CAN/CGSB2-4.162-M80 with 10 years of warranty against SeventyThree Only

any distortion in fabric due to any reason. Roller blind tube should be made of Aluminium with a diameter of

38mm, bottom rod should be powder coated and should come with the end cap to support the fabric, aluminium

brackets and a ball chain or any other sturdy fixing arrangement as per manufacturer specification all complete as

per direction of Engineer in charge.

White washing with lime on wall surface (three coats) to give an even shade incl. thoroughly brooming the surface

to remove all dirt, dust, mortar drops and extra subsequent coat of white washing with lime on wall surface. Rupees Eighteen Paise FiftyFive

Soft Board : Providing and fixing on wall 12mm thick approved quality soft board with cotton cloth/fabric of

approved make and shade on 12mm thick IS 710 MR Grade ply with 19mm x 25 mm thick Ghana teak wood

beading all around including semi glossy PU polish, as approved sample and as directed by Architect. The work Rupees Two Thousand Seven

97 6.00 shall be measured & paid in Sqm. for all floors, all level and at all heights including all costs, The rate shall be 2,710.01 Sqm

Hundred Ten Paise One Only

inclusive of lacquer polish to all the exposed wooden members. Only the clear elevation area of the cloth/fabric

shall be measured and paid.

Frosted sparkling glass film : Providing and fixing 3M Scotchcal Frosted Crystal or equivalent approved

Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass

with customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed by

manufacturer. Rate shall be inclusive plotter cutting design as per architect suggestion. Contractor shall provide Rupees Two Thousand Four

98 35.33 shop drawing for approval of Architect.work complete incuding all type of tools, tackles, scaffolding etc complete 2,474.00 Sqm

Hundred SeventyFour Only

as per suggestion of Architect/ EIC. If in case any application finishing will not as per satisfaction contractor shall

remove all film at their cost. Contractor shall do a sample mock of 5 Sqm minimum of glass film) ,shall be

approved from EIC.( At all floor)

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and applying Lacquer polish of approved make and finish on new wood and wood based surface to give

an even surface, including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of

wood file after completion of job etc. to the satisfaction of architects / EIC. (Mode of measurements: Only the

polished area shall be measured & paid for the items in which polishing is not inclusive in item description) work Rupees Three Hundred

99 20.00 shall be carried out as per the manufacture's specification & sample approved..(Exposed wooden surface at all 377.49 SeventySeven Paise FourtyNine Sqm

floor) (Mode of Measurements: Only the polished area shall be measured & paid for the items in which polishing Only

is not inclusive in item description)

ACP sheet Paneling : Providing & laying in line and level minimum 3-4 mm thick ACP sheet (selected and sorted

for its uniform colour and thickness) premium ACP sheet cladding of approved shade and quality & using Special

Aluminium Profile Appropriate to resist wind load & dead load with main frame & sub frame with aluminum

bracket & anchor fastner of hilti or other eqivalent brand each & every stone will be individualy fitted so that any

stone can be removed & replaced as & when require. ACP sheet should be continiously supported in full length at

top & bottom.Internal wired finished or mala finished plastered surfaces or required fabrication up to 300 mm ( in

scope of contractor) , as per drawing and suggestion of Architect/EIC The rate shall also include for necessary IS

grade approved ACP sheet façade HC-SF-R SS clamp of 304 hybrid grade.The clamp weight shall be minimum

250gms. Clamp body shall be of 304 grade wherein pin, externally threaded rod, internally threaded tube shall be

of 316 grade. The clamp body shall be of minimum 5mm thickness and shall be able to carry a dead load of

kgs at minimum offset.The clamp shall be available with variable offset lengths from 50-65mm and 80-120mm.

Test certificate shall be submitted by the manufacturer, The rate shall be inclusive fixing anchors HRD HR2 of

Rupees Two Thousand Nine

mm dia. (100 mm long). anchors (Nut Version) HSA of size M10 (90 mm long) of HILTI India Pvt Ltd. medium duty

100 20.00 2,923.01 Hundred TwentyThree Paise Sqm

Hybrid injection adhesive of Methacrylate resin which should be styrene free and used for Anchor fixing in Dry

conditions with HY 70 + HAS E rods of dia. M6 / M16of HILTI India Pvt Ltd The quoted rate are also including

cleaning, polishing, and scaffolding etc complete at all heights, all places, and all shapes as per drawings and

including laying in desired design and pattern and as per approved drawing or as directed by the EIC/Architec Rate

to be inclusive of water based Silicone paint of Downcorning , Kerakoll as per approved make list on stone surface

as per approved sample by Architect/Client. Rate to be inclusive of all material, wastage, necessary tools tackles

etc for fixing at all heights and for all floors. Clear laid area shall be measured & paid in sqm.grid size will be of

cutting,polishing & grooving will be in contractors scope vertical groove will be of 6mm beetween two sheet to be

kept open for rain scren principle & or may be sealed by dow corning appropriate grade silicon

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

FULL HT STORAGE(CARPENTORY WORK): Providing, making and fixing storage units in position as per reference

drawings. Storage made from IS 710 MR Grade 19 mm thick and 12 mm ply , finish with laminate both side as per

approved make and shade Solid Shutter: shall be made from IS 710 MR Grade 19 mm thick ply with both side

laminate finish with approved locking arrangment system. Ply shutter with refrences image, sample, Detail

Drawings and as per architect / EIC instruction. made from aluminium SS finish profile (olive or eqvilant approved Rupees Seven Thousand

make) with require all necessary accessories And locking arrangment system Shelf: as instruction of Employer's Nineteen Paise Sixty Only

representative/ Employer making and fixing shelf from IS 710 MR Grade ply finish with both side approved

Laminate. The rate shall be in sqm of elevation area

TV UNIT (+300mm Depth) : Providing & fixing projector drawer unit As per detail drawing and reference image

and detail shape & size with require accessories.

Top 35 MM th made from 12 mm th IS 303 ply & Laminate finish Storage body is made of 19mm 303 MR Grade

ply with 1.00 mm laminate finish and inner side 1 mm thick laminate finish including require nos of drawer with

all type of fittings ,cutout for air cerculation , require fixtures, hardware Hettich/Haffle make etc complete .SS

304 grade conceal handle shall be provide as per approved selection &detailed drawing and instruction of Rupees Fifteen Thousand Six

102 5.39 Employer's representative/ Employer.Rate shall incusive require fabrication work considering load capasity of AV 15,651.02 Hundred FiftyOne Paise Two Sqm

equipment.The work shall be done as per the approved specifications, sample approved and as directed by the Only

Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages,

necessary tools & tackles, adhesives consumable hardware & required SS 304 grade hardware/accessories of

approved make. The rate shall be in sqm of elevation area.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Exterior Aluminium Jali With Aluminium Frame work : Providing & fixing Aluminium Jali With Aluminium Frame

work equivalent make, design, sample and Approved by Architect/Employer's representative/ Employer. in

required shape, size & thickness all as per manufacturers specifications, such as all Exterior Alu.jali with frame

should be made by using Alu. frameing and Pure Polyester Powder Coating for External Applications, Metallic Or

Antique Look Finishes, using Aluminium jali. The frame work shall be made from Aluminium section make JINDAL/

HINDALCO/ DOMAL/ SAPA or equivalent make as per approved by Architect/EIC conforming to IS specification In

framing, shall be fixed to the wall/floor & ceiling with Sheet metal screws/Nylon grip screws of Corro-shield

/Fischer and shall be supported by filling required size wedges /washers/ MS wall connectors or packings / MS

washers to ensure right angles and plumb level. with as per approved drawings and reference images. Jali

elements thickness shall be 2 mm. fixing edges will be 4O TO 50 MM Frame shall be fixed on RCC Structure/Brick Rupees Four Thousand Seven

103 549.75 Work/ Primary Steel Structure (MS with protective coat of Red oxide/Zinc Primer Shall be Used). Hilti make GI 4,773.03 Hundred SeventyThree Paise Sqm

Screw Fastners or equvalent, GI Thread Rods and MS cleats shall be used for fixing of Alu.jali elements on RCC/MS Three Only

Primary fabricated structure. Joints shall be filled with base material of Alu. jali as and where required. The quote

rate shall be inclusive of all design, & shop drawing and sample mock of all elements approval from Architect &

consultant. The quote rate shall including necessary scaffoldings for all heights, all Taxes, duties, statutory

obligations and safety code compliance as per client. Rate shall be inclusive of all required fabrication work for

fixing only primary strcure shall be provided as base structre only as per requirement. Mode and method of

measurement shall be in accordance with IS: 1200.a )

Lawn plantation : 1) Supplying and filling with good quality garden soil obtained from outside, including watering,

ramming well, consolidating, compacting and dressing etc. complete, as directed. 2) Supply and spreading of FYM

shall be done in proper slope including watering and fine dressing. Termite treatment to be done before laying of

FYM. 3) Providing and laying lawn with earth 50mm to 60mm thickness on prepared ground with proper level and

ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen Rupees Six Hundred FiftySix

and light watering with sprinkler and maintenance more till the grass establish properly, as per direction of Paise Twenty Only

Engineer in charge. All steps have to followed by contractor as specified for proper establishment of lawn. Cost

shall be for surface preparation to after lawn establishment, all steps inclusive in this item.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Convex Mirror is a curved mirror : Providing and supplying Convex Mirror as per references image, detail and

approved sample by Architect/EIC. The Convex Safety Mirror is structured with a polycarbonated front and acrylic

back which makes it lighter and easy to place on any exterior. It also looks like a bubble mirror that has a

curvature of the 130-degree view. The Convex Mirror comes with a protective film coating that makes the traffic

mirror scratch-resistant, break-resistant, and tear-proof.The Polycarbonate Lens reflects a crystal clear and bright

image of the view which can be seen from a long distance. It also magnifies the opposite fronts that help the Rupees Two Thousand Nine

105 2.00 drivers to locate small things clearly. The contractor shall Convex Mirror with Installation Kit, Nuts & Bolts 2,903.75 Hundred Three Paise Each

Included support, Location, any Height and all complet installation work as per site condition. This Item includes SeventyFive Only

cost of all labour, transfort etc. as required for completing the work in all respects. All works are carried as per

approval and instructions of the architect. Rate shall inclusive of sample, all materials, loading, unloading, all

taxes, transportation, placing at all floors and for all leads,all accessories as described in item description.

Road Marking with hot applied thermoplastic paints with reflectorising glass beads on bitumen/RCC surface

providing and laying a hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads

@250gms/m2 area , thickness of 2.5mm is excluding of surface applied glass beads as per IRC: 35-2015. The

finished surface to be levelled, uniform and free from streaks and holes. Thermoplastic paint shall be used for

Zebra Patta, Bump Patta lane, edge line, cut patta, arrows for direction, letter or number writing etc. The white Rupees Three Hundred

106 18.00 colour marking should provide liminance co-efficient on cement road shall be min 130 mcd/m2/lux and Asphalt 367.72 SixtySeven Paise SeventyTwo Sqm

road shall be min 100 mcd/m2/lux during the service life during the day time the marking should make the Only

performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-

of IRC: 35-2015. Warranty for retro reflectivity shall be 2(Two) years.

Providing and fixing of Corner Guard for Various Flashing in 100mm x 100mm size in Equal Shape with 5mm edge

lipping on both side . The Angle Flashing shall be made out of 8 to 10 mm thick, The corner guard shall have plastic Rupees Three Hundred

107 24.00 protective guard film of minimum 25 microns to avoid scratches during transportation. The U track shall be fixed 372.84 SeventyTwo Paise EightyFour Nos

with suitable POP rivet with wall and roof panels with minimum spacing of 450 mm c/c. size of guard 1000mm Only

Providing and fixing Rumblers strips of required size with any design suggested by Architectect/ EIC like bottom

design, chequered design, anti skid pattern specially designed for road grip as per drawing & sample approved by Rupees One Thousand Seven

108 36.00 Architect which is covered with premix bituminous carpet at 1m centre to centre at approved locations to control 1,788.71 Hundred EightyEight Paise Rmt

speed marked with white strips of road marking paint etc complete as directed by Engineer in charge. SeventyOne Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Cat Eye/Road Stud/RPM : Supplying of Molded TwinShanks Raised Pavement Markers made of polycarbonate

and ABS moulded body and reflective panel swith micro prismatic lens capable of providing total internal

reflection of the lightenteringthe lens face and shall support a loadof 13635kgs. tested in accordance to

ASTMD4280Type Handcomplying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 DO

III Dt 11.06. 1997. The height, width and length shall not exceed 20mm, 130mm and 130mm and with minimum

Rupees Three Hundred

reflective area of 13Sq cmon each side and thes lope to the base shall be 35+/-5 degree.The strength of

109 60.00 326.23 TwentySix Paise TwentyThree Each

detachment of the integrated cylindrical shanks, (of diameter not less than19+/-2mm and height not less than

30+/2mm) from the body is to be a minimum value of 500Kgf. Fixing will be by drilling holes on the road for the

shanks togo inside, without nails and using epoxy resin based adhesive as per manufacturers recommendation and

The color of the marker should be as per the IRC 35-2015 and as directed by Engineer-in-charge.

Kota Stone SHELF : (350 - 500 D) : Providing, making, fixing as per detail drawing and required length and depth

shelf made from 25 mm Kota Stone (1-Cement: 4- fine sand ) with one side finish polished, round edge and

providing lighting arrangement cutout and fixing as per detail drawing and instruction of EIC.Rate shall inclusive all

Rupees Four Hundred Thirty

110 784.00 necessary hardware and fitting.The work shall be done as per the specifications, sample approved and as directed 430.20 Rmt

Paise Twenty Only

by the Architect and Engineer-in-charge. .Rate shall inclusive of providing mock up sample for approval of

Direct Bought Out Item : Providing and placing in position SS brush finish (12 LTS PEDAL BIN/ STEP BIN -) of Kich , Rupees One Thousand One

111 113.00 Dorma ,etc Square Pedal bin 10x15 Stainless Steel Dustbin or Equivalent as per images and as selected by the 1,184.73 Hundred EightyFour Paise Nos

Architect. SeventyThree Only

Artificial Plant : Providing and supplying planters with plant as per selection of Architect. Item includes cost of all

labour, transfort etc. as required for completing the work in all respects. All works are carried as per approval and Rupees Three Thousand One

112 30.00 instructions of the architect. Rate shall inclusive of sample, all materials, loading, unloading, all taxes, 3,153.47 Hundred FiftyThree Paise Nos

transportation, placing at all floors and for all leads. FourtySeven Only

Providing and fixing Sainless steel signage plate of 1.5mm thick with laser print/ etching and filled with duco paint Rupees Seven Thousand Two

113 2.34 of approved make including fixing to the wall or door with required acessories and as specified type including 7,285.33 Hundred EightyFive Paise Sqm

fixing etc complete as directed by engineer in charge ThirtyThree Only

DOOR MAT : 3M Nomad - Wiping technology - Heavy Duty 7150 - or eqvivalant approved make Grey Colour: Open

Contruction Loop Matting with Crush Resilient Vinyl with backing. Matting Should be durabe shouldn't Flatten ove Rupees One Thousand Two

114 69.60 time. Thickness Should be 13mm Min.Suitable for heavy traffic areas, where traffic is upto 4 lakh people per year. 1,261.39 Hundred SixtyOne Paise Sqm

work complete as per approved sample. ThirtyNine Only

Providing & placing in position DIGITAL CLOCK - WALL MOUNTED as per architect selection Ajanta Digital Wall

Rupees Two Thousand

115 90.00 Clock(Brown, Black, With Glass) 2,079.09 Nos

SeventyNine Paise Nine Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Signages : Providing and fixing of the following signages using make of cosign or equivalent approved make by

architect.All the detailed work out as per the detailed drawing and instruction of EIC., specifications and drawings

as indicated there in to all heights and elevation including necessary scaffoldings / supports /permanant fixing

with cement mortor if fixed to ground etc complete in all respects.The Signage cost should be inclusive of Rupees One Thousand Eight

116 52.00 panels,hanging system,bridges,primary & secondary fixings,vinyl,painting,powder coating self glowing mateial as 1,888.60 Hundred EightyEight Paise Sixty Nos

directed etc.All shop drawings and coordination with other services is in scopeof contractor.( At all floor) Size (150 Only

x 600mm) - FACE /WALL MOUNTED NAME PLATES/SIGNAGES/INFORMATION SIGNAGES (with back lit)

Providing, supplying and placing World Globe - as per sample approved by architect Rupees Seven Hundred

117 2.00 749.17 FourtyNine Paise Seventeen Nos

Wall Painting (Canvas painting) : Providing & fixing painting made from canvas painting Canvas –suitable for oil

and acrylic paints. The 100% cotton plain-woven canvas 1.5 mm thick laminatewith UV protection, abrasion &

chemical resistance.with require stretching and/or framing.work approved by Architect. The art work shall be

hanged on the wall using heavy duty approved key-hole chaplas The concept of the painting work will be

Rupees Fourteen Thousand

sugeested by architect and interior designer and based on that offers from the artists to be invited for design and

118 23.04 14,518.75 Five Hundred Eighteen Paise Sqm

execution of the painting. The selection of the artist is to be done by architect and interior designer only. Main

SeventyFive Only

contractor is bind to follow the methodology suggested by architect and interior designer to be followed for

development of commissioned art work.Rate are inclusive of artist appointing by main contractor. ( Paintings

Natural Plant : Providing and supplying planters as per site requirement. The contractor shall cater for planter

with plant as per selection made by Architect. The Architect shall recommend worth Rs. 4000/-piece maximum

or as requirement. The contractor shall be paid 15 % of the incurred cost on producing the bills / vouchers for the

same. Item includes cost of all labour, transfort etc. as required for completing the work in all respects. All works Rupees Four Thousand

are carried as per approval and instructions of the architect. Rate shall inclusive of sample, all materials, loading, SixtyFive Paise TwentyFive Only

unloading, all taxes, transportation, placing at all floors and for all leads,all accessories as described in item

description.As approval of architect.

Inauguration Plate : Providing & fixing inauguration plate (Takhti) made from +18 mm thick Granite with

embossed/engraved text letters made from SS 304 grade of various sizes 1. The fonts and letters shall be as per

the reference drawing made from SS 304 with national Emblem Logo The work shall be done as per the approved

shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Rupees Six Thousand Nine

120 2.16 Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools 6,936.30 Hundred ThirtySix Paise Thirty Sqm

& tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all Only

the needful and shall fulfill Architect's design intent. No additional claims will be entertained for this.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Expansion Joint Edge Reparing Treatment : Repairing and profiling of the existing joints line with help of

polymer modified mortar to be fixed in alignment and straight line as per the joint design width and joint design Rupees Four Hundred Six Paise

complete . FiftyThree Only

Providing and fixing of 1.2mm thick EPDM/PVC waterbarrier membrane over the joint profile with help of special

adhesive and necessary loop throughout the joint profile before fixing of the joint system to ensure water tight Rupees One Thousand Eight

122 108.48 joints,complete. 1,835.17 Hundred ThirtyFive Paise Rmt

Horizontal Internal : Floor to Floor & wall to floor FF & WF : The work shall consist supply and installation of 3R

joints and seals -expansion/seismic joint sysytem model 3R MSDSZJ /3R MSD -QZJ or as approved by client or

equivalent in accordance with the contract drawings and requireements of the specifications below. The joints are

proprietary design utilizing extruded aluminum base members ,self aligning / centering arrangement and support

plates. The material shall be such that it provides wateright flat joint cover expansion control sysytem that is

capable of accommodating multidirectional seismic movement without stress to its components.System shall

consisit of metal profile that incorporates a universal aluminum base member designed to accommodate various

project conditions and floor/roof treatments. The cover plate shall be designed of width and thickness requried to

satisfy projects movement and loading requirements and secured to base members by utilizing manufacturer's pre-

engineered self-centering arrangement that freely rotates / moves in all directions. The self - centering

Rupees Six Thousand Two

arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion

123 76.08 6,272.10 Hundred SeventyTwo Paise Ten Rmt

cavity to allow freedom of movement and flexure in all directions including vertical displacement . The joint

sysytem shall resist damage or deterioration from the impact of falling ice, exposure to UV,airborne contaminants

and occasional foot traffic from maintenance personnel.Provision of Moisture Barrier Membrane in th Joint

System to have watertight joint is mandatory requirement. Material to confirm to properties of ASTM

6063.movement design for system shall be heavy duty loading as per the DIN 1055 load rated and material

conforming to ASTM T6063 standards and cover concealment having floor finish and seismic movement

including preparing of necessary block out in PCC or nonshrink grout over the joint profile as per the joint

manufacturer speciation and the joint design and drawing ,complete

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

External - vertical : The work shall consist supply and installation of 3R Joints and seals - expansion/seismic joint

sysytem model 3R MSNGZ/3REM or equivalent as approved in accordance with the contract drawings and

requirements of the specificatios below. The joints are proprietary design utillizing extruded elastomeric seals and

aluminum base members. The material shall be such that it provides an Expansion Joints System suitable for

Vertical wall to wall flat application,both new and existing construction in structure & complexes with no slipping

down tendency amongst the components of the Joint Sysytem. the Joint sysytem shall utilize lightweight

aluminum profiles exhibiting required exposed aluminum surface mechanically snap locking to facilitate joint Rupees Four Thousand Eight

124 32.40 movement throughout the normal movement cycle,the sysytem shall demonstrate the movement ability to 4,878.30 Hundred SeventyEight Paise Rmt

remain flat at all times and provide a flush transition to maintain the asthetic look between opposing and Thirty Only

adjacent finish construction. Providing and fixing of 3R EM / 3R MSNG system designed for exterior wall finishes

with expansion movement of +/- 25mm design for external application on wall to wall /wall to corner where

exposed metal plate is desired as per the joint design and design width over the joint profile as per the joint

manufacturer speciation and the joint design and drawing ,complete.

Internal - vertical : The work shall consist supply and installation of 3R Joints and seals - expansion/seismic joint

sysytem model 3R MSNSK /QSK or equivalent as approved in accordance with the contract drawings and

requirements of the specificatios below. The joints are proprietary design utillizing extruded elastomeric seals and

aluminum base members. The material shall be such that it provides an Expansion Joints System suitable for

Vertical wall to wall flat application,both new and existing construction in structure & complexes with no slipping

down tendency amongst the components of the Joint Sysytem. the Joint sysytem shall utilize lightweight

aluminum profiles exhibiting required exposed aluminum surface mechanically snap locking to facilitate joint Rupees Five Thousand One

125 32.40 movement throughout the normal movement cycle,the sysytem shall demonstrate the movement ability to 5,110.60 Rmt

Hundred Ten Paise Sixty Only

remain flat at all times and provide a flush transition to maintain the asthetic look between opposing and

adjacent finish construction. Providing and fixing of 3R MSNSK/ 3R IL2 system designed for interior wall finishes

with expansion movement of design for internal application on wall to wall /wall to corner where concealed

/flush metal plate is desired as per the joint design and design width over the joint profile as per the joint

manufacturer speciation and the joint design and drawing ,complete

S.S. 304 Letters : Providing and Fixing the S.S. 304 Letters with back light of given size as per Architect's drawings

and approved sample or make (Approx Height of each letter 18 to 36 inches) along with all necessary hardwares,

scaffolding, Alu/MS Back support, hanging support and accessories, The rate shall be for complete item inclusive Rupees TwentyTwo Thousand

126 42.00 of all material, labour, wastages, necessary tools & tackles, for all floors, all heights, all levels and all places within 22,649.25 Six Hundred FourtyNine Paise Each

campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be TwentyFive Only

entertained for this.

(Consider Letter : BOYS HOSTEL / GIRLS HOSTEL)

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

SS LOGO : Providing and Fixing Logo including the design, fabrication, supply, and installation of stainless steel

(SS) backlit Logo for signage with SS plate. Letters shall be made from high-grade SS 304 with a brushed or mirror

finish and sample approved as directed by the Architect and Engineer-in-charge.. logo made SS plate any shape

with backlit of given size & shape as per Architect's drawings and approved sample or make (Approx Height of logo

18 to 36 inches) along with all necessary hardwares, CNC cutting, scaffolding, Alu/MS Back support, hanging Rupees Eleven Thousand

127 4.00 support , accessories, and vinyl,painting,powder coating self glowing mateial as directed etc. The rate shall be for 11,034.25 ThirtyFour Paise TwentyFive Nos

complete item inclusive of all material, labour, wastages, necessary tools & tackles, for all floors, all heights, all Only

levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No

additional claims will be entertained for this.

Charcoal fluted panel PANELING With Polish/PU Finish : Providing & fixing 12mm thick Fluted Panel fixed on

12mm plywood & frame work. The frame work shall be made from PLY Equivalent make approved by

Architect/EIC conforming to IS specification and vertical grooves that add texture and depth to interior or specified

interior walls. The panels are designed with interlocking edges for a seamless finish. The installation includes Rupees Two Thousand Two

128 420.00 necessary surface preparation and attachment using adhesive and/or mechanical fasteners as per manufacturer. 2,217.47 Hundred Seventeen Paise Sqm

All frameworks shall be treated with anti-termite treatment & hidden The framework shall be covered as per FourtySeven Only

instructed by EIC. Approved make Fluted panel,adhesive ,tape, headless nails etc ,finished with Polish/PU paint

& in pattern as shown in the drawing. Rate shall be inclusiveg grooves etc complete as per drawing or as directed

by EIC/ Architect.

Providing and fixing 'Y' shaped barbed wire fencing on compound wall top with vertical angle of 50x50x6mmx0.50

mt. height, two cross angle 50x50x6mmx0.45mt. Length, having 3 horizontal and two diagonal rows of barbed

wire (9.38 kg/100 rmt) on vertical angle and three horizontal and two diagonal barbed wire rows on each cross Rupees Five Hundred

129 1200.00 angle incl. cost of barbed wire, necessary GI stapplings, fixing on top of compound wall, painting angle with one 537.93 ThirtySeven Paise NinetyThree Rmt

coat of anticorrosive primer and two coats of enamel paint of approved qaulity, necessary scaffolding etc. Only

complete as per the direction of the Engineer in charge.

Providing and fixing (Chainlink Fencing) with fabrication of M.S. Angle vertical support of size 75x75x6 mm and

horizontal support of 50x50x6 mm on top, centre and bottom with galvanize chain link 50x50 10 guage jali fitted

with 40x6 mm M.S. flat including welding and erecting the same in position incement concrete (1:2:4) foundation

blocks including excavation of size 600 × 600 × 900 mm, placing concrete, setting posts in line and level, and Rupees One Thousand Four

130 1260.00 refilling around the foundation complete. Posts shall be provided at 3.00 m centre to centre spacing. with 1,407.74 Hundred Seven Paise Sqm

necessory excavation including two coats of oil Painting over single coat of primer etc complete as directed & SeventyFour Only

inclurling one open able gate 3' ft wide and 7 ft in ht. including of two coats of oil paint on M.S. Structure as per

drawing & directed by Engineer in charge

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Decorative Handle(pair) : Providing & fixing CNC cutting and design on MDF/veneer fxed on ply with necessary

accessories etc with complete on glass/flush door finish with veneer. The work shall be done as per the approved

shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the

Architect/EIC. Provding and fixing/placing custom made decorative handle as per detail drawing/ref.image.The

work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, mock up Rupees TwentyTwo Thousand

131 2.00 sample approved and as directed by the Architect/EIC. The rate shall be for complete item inclusive of all material, 22,591.68 Five Hundred NinetyOne Paise Pair

labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within SixtyEight Only

campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be

entertained for this. The unit shall be manufactured in parts and these parts shall be assembled at site.

PLUMBING FIXTURE : Providing, fixing, jointing and testing in position of various Bathroom C.P. Fixtures with Rupees One Thousand Four

132 38.00 hydraulic testing complete as per design, drawing and instruction of site incharge. 25mm Dia Control Valve 1,451.88 Hundred FiftyOne Paise Nos

EightyEight Only

Providing and fixing screw down bib taps of following size. (B) Brass chromium plated screws down Bib Tap. (i)

15mm dia. Rupees Two Thousand Paise

Providing and fixing health faucet with 1 m PVC tube and swivel hook including all fittings complete. Rupees One Thousand Five

134 61.00 1,585.45 Hundred EightyFive Paise Nos

FourtyFive Only

Providing, fixing, jointing and testing in position of various Bathroom C.P. Fixtures (Angle Cock) with hydraulic Rupees Two Thousand Two

135 74.00 testing complete as per design, drawing and instruction of site incharge. Urinal stop cock. 2,268.41 Hundred SixtyEight Paise Nos

Providing and fixing white glazed vitreous china wall mounting type (European type) water closet with C.P. bolts,

nuts, C.I. Chair or other hanging arrangement, white solid plastic seat with lid, C.P. brass hinges and rubber

buffers, Metropole flush valve reguler 40mm size (concealed body) with exposed shut off provision , C.P. brass Rupees Seventeen Thousand

136 53.00 screws and washers complete, including cutting and making good the walls floors where required. Wall hung EWC 17,968.41 Nine Hundred SixtyEight Paise Nos

& Concealed Flush Valve Complete) matching white plastic seat with lid & CP brass hinges & CP push plate. FourtyOne Only

Providing and fixing White glazed vitreous Wash Basin Over-Counter, with supporting in stone flooring, 1 no,

Rupees Five Thousand Eight

mm CP Bottle trap with extension piece to wall flange with rubber adopter for waste connection,1.2m Flexible

137 47.00 5,819.81 Hundred Nineteen Paise Nos

Pipe [1No] and waste coupling. Etc complete. Wash Basin Table Top - 420x420x155 mm

Providing & fixing in position 15 mm C.P. brass angle cock of best quality with 1.2 Rmt Long pvc Tube and Rupees Two Thousand Paise

138 172.00 accessories with necessary fittings etc. complete. 2,000.10 Nos

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing & fixing in position 15 mm C.P. brass pillar cock of best quality with necessary fittings etc. complete.

Rupees One Thousand Seven

139 40.00 1,751.75 Hundred FiftyOne Paise Nos

SeventyFive Only

Providing and fixing TOWEL RING SQUARE , as approved by the architect. Work complete including all type of

fittings, etc complete as per suggestion of Architect/EIC. Rupees Nine Hundred

SeventyFour Paise One Only

Providing and fixing SOAP DISH HOLDER as approved by the architect. Work complete including all type of fittings

Rupees One Thousand Three

etc complete as per suggestion of Architect/EIC.

141 49.00 1,344.74 Hundred FourtyFour Paise Nos

SeventyFour Only

Supply, Installation, Testing & Commissioning vitreous matrix set (For Handicap) including matrix EWC (European

type water closet) with cistern, wall hung matrix wash basin, lever arm faucet for ease of operation, centre pre- Rupees FiftyThree Thousand

142 2.00 punched tap hole, grab bar with slightly lower height for added convenience & fixed to wall with brackets including 53,924.73 Nine Hundred TwentyFour Paise Nos

cutting and making good the wall and floors as required. Colour Star White. SeventyThree Only

Providing and fixing Urinal of approved quality including connection with trap and with integral longitudinal flush

Rupees One Thousand Six

pipe. (A) Squating plate pattern white earthenware 550mm x 300mm.

143 9.00 1,631.88 Hundred ThirtyOne Paise Nos

EightyEight Only

Providing and fixing Kitchen sink with C.I. Or M.S. brackets, painted white including cutting holes in walls and Rupees Two Thousand Three

144 11.00 making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size 2,326.66 Hundred TwentySix Paise Nos

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or

plywood sheet and fixing to wooden pluge with C.P. brass screws and washers. Rupees Eight Hundred

FiftyNine Paise FourtyOne Only

Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each

Rupees Two Hundred

EightyTwo Paise Sixteen Only

Drilling 300mm dia.pilot hole hydrolic drilling machine & drilling trully vertically (testing by vertically test) bore

hole in alluvial strata,any kind of soil incl.sand,murrum,hard murrum,soft rock,hard rock incl.cost of bentonite Rupees One Thousand Six

147 300.00 powder done by mud flushed rottary equipment bore hole should stand at least for 27hrs.incl.lowering the pipes 1,634.20 Hundred ThirtyFour Paise Rmt

in position as directed and incl.supplying and packing gravel of 4mm to 6 mm size etc. comp. as directed. Twenty Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE

410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270, of reputed

& approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand Rupees Three Thousand Six

148 300.00 and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as 3,616.81 Hundred Sixteen Paise Mtr

per direction of Engineer-in-charge. EightyOne Only

(B) 200 mm nominal 6 mm thick

Development of hole by air compressor having capacity 400 cfm/100 psi till sand free discharge of water Rupees TwentyOne Thousand

149 1.00 incl.testing of water supply flow etc. comp. as directed. 21,806.68 Eight Hundred Six Paise Job

SixtyEight Only

Providing & laying approved make ISI marked HDPE 6Kg / cm2 (Class-3) as per IS:4984:1995 PE-80 to be

Rupees One Hundred

150 250.00 erected at road crossing on or floor as directed for laying of cable. The pipes as following size of dia & weight per 6 163.62 LS

SixtyThree Paise SixtyTwo Only

mtr (B) 50 mm inner Dia.

Supplying & Fixing 50 mm dia heavy top bottom piece,G.I.Bend,Coupling,sand guard MS clamp with Nut Bolt Rupees Five Thousand Nine

151 1.00 etc.complete as directed by EIC. 5,968.60 Hundred SixtyEight Paise Sixty Mtr

Water Analysis test in Govt.approved laboratory incl. all water testing etc. comp. as directed Rupees Three Thousand Three

152 1.00 3,361.15 Hundred SixtyOne Paise Fifteen slots

Providing water harvesting pit of 5.50 m Dia well and 2.46 mt x 2.46mt x 4.00 mt size brick masonary well for

water logging with excavation in any strata upto four meter depth, filling the pit with B.T. Metal 40 mm in 0.80 Rupees One Lakh FourtyEight

mt. depth with 25-40mm kapachi, 0.80 mt. depth and 0.50 mt. depth with coarse sand & charcoal in layers Thousand Three Hundred

153 1.00 including making P.V.C. line for water inlet etc. as directed with 300mm dia bore 40 mt. depth and 200mm dia 1,48,396.83 Pair

NinetySix Paise EightyThree

UPVC CM type casing pipe as slott 1.5 to 2.0 mm size and ordinary pipe with gravel packing or as directed. Only

Providing and constructing filter chamber of size 1.50 x 1.50 x 1.50 mt. as directed including connection rainwater

pipes as per detailed as directed by Engineer in charge including cost of labour and material Rupees TwentyOne Thousand

154 1.00 21,721.55 Seven Hundred TwentyOne Nos

Paise FiftyFive Only

RCC Hume Pipe : Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road

crossing or on floor with necessary material in an approved manner and making the ground as per original.(C) 300 Rupees Three Hundred

mm dia FourtyThree Paise Fourty Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Three seater sofa Modular (Type-01) : Providing and Supplying Cushion three seater sofa SIDE FRAME

ASSEMBLY: The side frame assembly should be fitted to the two ends of the connecting beam assembly to form

the leg-cum-armrest assembly. It should be made of 03.81 ± 0.03cm. x 0.2 ±0.016cm thick cmx0.16cnn and

black powder coated (DFT 40- 60microns). The ends should be fitted with ABS moulded end caps.TIE MEMBER: It

should be the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members should

be used to connect the side frames The tie-member should be of 0 3.81 ±0.03cm. x 0.2 ±0.016cm. thick em x

0.16cm and black powder coated ( DFT 40-60 microns ). The seat/back assemblies should be mounted on one of

the tie-member which has 5.0 ±0.1em x 5.0 ±0.1 em x 0.5 ±0.1em. thk 5 5 ±0.1em Long MS. Std. angles welded to

mount the seat and back. SEATREST ASSEMBLY: The seat rest assembly consshould be ts of a fabricated inner-

frame assembly insitu-moulded High Resilience (HR) Polyurethane foam having density Equal45 +1- 2 Kg/m3

with Hardness load 25 ± 2 kgf for 25 Percent compression of the foam. The complete moulded seat rest assembly

Rupees TwentyThree Thousand

should be covered with a replaceable fabric upholstery cover SEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. (T)

156 2.00 23,869.33 Eight Hundred SixtyNine Paise Nos

BACKREST ASSEMBLY: The backrest assembly should be flexing type and consshould bets of a fabricated inner-

ThirtyThree Only

frame assembly insitu-moulded with High Resilience (HR) Polyurethane foam having density Equal45 +1-

Kg/m3 with Hardness load 14 ± 2 kgf for 25 Percent compression of the foam. The complete moulded backrest

assembly should be covered with a replaceable fabric upholstery cover. BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X

6.0cm (T).ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon and fitted to the front end of

side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface.

Overall Dimensions of Chair- Seat Height- 43.5 cm. Height- 78.5cm.Width and Depth of Chair as - Width-164.0cm

and Depth-70.0 cm. The rate shall include all materials. hardware, and labour etc. complete as per instruction of

engineer-in charge.

Three Seater sofa-Custom Made Sofa (Type-02) : 2100mm (L) x 715 mm (B) x 800 mm (H) The seat shall 150 mm

th 40 density & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image

and instruction from EIC/Architect all external & internal exposed woodwork to be finished in PU matt finish

polish. .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications,

sample approved and as directed by the EIC/Architect . The rate shall be for complete item inclusive of all Rupees FiftyFour Thousand

157 8.00 material, labour, wastages, necessary tools & tackles, approved make for all floors, all heights, all levels and all 54,381.37 Three Hundred EightyOne Paise Nos

places within campus. Contractor shall do all the needful and shall fulfill EIC/Architect's design intent. No ThirtySeven Only

additional claims will be entertained for this. Rate shall inclusive of shop drawing, mock up sample, all materials,

loading, unloading, all taxes, transportation, placing at all floors and for all leads, all accessories as described in

item description. As approval of EIC/Architect.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

2 Seater sofa - Modular (Type-01) : Providing anci Supplying Cushion two seater sofa. SUE FRAME ASSEMBLY:

The side frame assembly should be fitted to the two ends of the connecting beam ass mbly to form the leg-cum-

armrest assembly. It should be made of 0 3 81 10.03cm. x 0.2 +0.016cm. thick crnxÜ 16cnn and black powder

coated (DFT 40- 60micror.s). The ends should be fitted with ABS moulc!ed encl caps TIE MEMBER: It should be

the connecting beam assy. 'vhich hoids the two side frames to each other. 2 nos tie members should be used to

connect the side frames. The tie-member should be of C 3.8 +0.03cm. x 0.2 +0.016cm. thick cm x 0.16cm and

Dleck po'wder coated ( DFT 40-60 microns ) The seat/back assemblies should be mounted on one of the tie-

member which has 5.0 +0.1cm x 5.0 +0.1 cm x 0.5 +0.1cm. thk 5.5 +0.1cm Long MS. Std angles welded to mount

the seat and back.SEATREST ASSEMBLY:The seat rest assembly consshould be ts of a fabricated inner-frame

assembly insitu-moulded High Resilience (HR) Polyurethane foam having density Eoual 45 +1- 2 Kg/m3 with

Hardness loed 25 + 2 kgf foi 25 Percent compression of the foam. The complete moulded seat rest assembly Rupees Seventeen Thousand

158 4.00 should be covered with a replaceable fabric upholstery coverSEAT SIZE: 52.0cm. (W) X 50.0cm. (D) X 6.0cm. 17,190.20 One Hundred Ninety Paise Nos

(T)BACKREST ASSEMBLY:The backrest assembly should be flexing type and consshould be ts of a fabricated inner- Twenty Only

frame assem.bly insitu-moulded with High Resilience (HR) Polyurethane foam having density Equal 45 +1-

Kg/m3 with Hardness load 1 4 + 2 kgf for 25 Percent compression of the foam. The complete moulded backrest

assembly should be covered with a replaceable fabric upholstery cover.BACK SIZE: 52.0cm. (W) X 59.0cm. (H) X

6.0cm. (T).ADJ. GLIDES: The adj. glide should be injection moulded in black Nylon and fitted to the front end of

side frame assembly along with ABS moulded adj. Glide base to take cshould be or unleveled floor surface.Overall

Dimensions of Chair- Seat Height - d3.5 cm. Height - 78.5cm.Width and Depth of Chair as - Width-113.0cm and

Depth-70.0 cm.The rate shall include all materials, hardware, and labour etc. complete as per instruction of

engineer-in charge.

2 Seater sofa - Custom Made Sofa (Type-02) : 1500(L) x 700 (W)X 700(H) made up of Solid teak wood frame PU

semi gloss finished polish. The seat & back shall be in high density foam & finished in Approved fabric upholstery

& back - back side finish with ply 303 & febric finish as per the drawing/image and instruction from Architect/EIC

all external & internal exposed woodwork to be finished in PU semi gloss finish polish. The work shall be done as

per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by

the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, Rupees FourtyEight Thousand

159 4.00 wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within 48,227.70 Two Hundred TwentySeven Nos

campus. Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be Paise Seventy Only

entertained for this. Rate shall inclusive of shop drawing ,mock up sample, all materials, loading, unloading, all

taxes, transportation, placing at all floors and for all leads,all accessories as described in item description.As

approval of architect.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

OFFICE TABLE (Type-01) : Providing and Placing Table: The main desk shall be of dimension 1500 x 750 x 740 mm

additional side runner of 1050 x 450 x 705 mm. The table top and side panel of the main and side table to be

made out of 25 mm thk plain particle board (PPB) cladded with 0.6mm thk post formed laminate and 1mm thk Rupees ThirtySix Thousand

160 2.00 backing laminate (BDL). The modelsty shall of 18 mm PPB cladded with 1mm thk decorative laminate (DL) on both 36,774.10 Seven Hundred SeventyFour Nos

sides and edges to be selaed with 2mm thk PVC beading. A mobile pedestal of size 646H X 390WX 435D shall be Paise Ten Only

SIDE TABLE (CORNER TABLE) : Providing and Placing The side table GLASS should be 60 cm(W) x 60(D) x

35.1cm(H), 12+/-0.33 mm thick black tinted Toughened Glass UV glued with bushes made in SS 202 grade for Rupees Four Thousand Two

161 8.00 fixing with understructure. The SIDE TABLE UNDERSTRUCTURE is a welded Assembly made in SS202 grade having 4,221.80 Hundred TwentyOne Paise Nos

Dia 12+/-0.04 as per IS:1762 Eighty Only

Center Table : Providing and Placing The side table GLASS should be 112 cm(W) x 60(D) x 35.1cm(H), 12+/-0.33

mm thick black tinted Toughened Glass UV glued with bushes made in SS 202 grade for fixing with Rupees Five Thousand Six

162 10.00 understructure.The SIDE TABLE UNDERSTRUCTURE is a welded Assembly made in SS202 grade having Dia 5,615.60 Hundred Fifteen Paise Sixty Nos

12+/-0.04 as per IS:1762 Only

KING SIZE BED : Providing and Placing King Bed made of 18mm thick Prelam MDf back rest ,foot rest both sides

with 2mm thick pvc edge bidding.Mattress board made of Consist of Pro-Lift Bed Fitting Easy Fit Extended Arm,

Frame with wooden slat and mounting brackets (in flat pack condition)Bed top size of – & 1830 x 2000mm.

Double & triple row of 53 x 8.5mm slats for strength, stability & comfort.30° opening angle allows easy Rupees FiftyFour Thousand

163 12.00 access.Ideal for storage under the bed. Hydraulic Ideal for storage under bed. Special Heavyduty gas springs 54,822.80 Eight Hundred TwentyTwo Nos

available in two loads. 30° opening angle allows easy access. Easy to lift (with the weight of top board) with Paise Eighty Only

minimum force. Easy access as the gas lift keeps the bed top stay. Easy to fit. Long brackets provided for better

support to the bed platform, Finish : Anthracite. Bed Size - 1866x2036x900

SIDE TABLE : Providing and Supplying bed side table Overall Size :Width 61cm Depth : 45.5cm Height : 50.35cm

Material : Drawer Made of 19/18 ply all proof (IS 710) mm and Drawer fronts of ply+ laminate finish and drawer

panels are made of 19/18 mm thick ply (IS 710). All the exposed edges are edge banded with 1 mm thick laminate.

Hardware . The high quality hardware useci Iike Roller Slides , Hinges minifix, dowels is of make Hettich.Packets Rupees Seven Thousand Four

164 24.00 .The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample 7,401.28 Hundred One Paise TwentyEight Nos

approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of Only

all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all

places within campus.

Providing and Placing Double Bed Mattress ,Two pillow,bedsheet with pillow cover - 1800x1950x150mm -

goldline plus pu form 40 density 300 gsm cottan satin quilt cover.Mattress back putti made of 12mm thick prelam Rupees TwentyTwo Thousand

165 12.00 mdf bothside white finish.Kurlon dew pillow 600x400 Fill: Polyester Fibre Quality of shell fabric: 110 GSM cotton 22,202.83 Two Hundred Two Paise Set

satin patti Outer Shell Layer: Cotton Fill Weight (in gms): 650.Bedsheet with pillow 100% cotton of bombay dyeing EightyThree Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

DINING TABLE (TYPE-01) : 1500 L X 800 D X 750 HT - Providing and supply Table top made of 25mm thick Prelam Rupees Fifteen Thousand Three

166 4.00 Particle with 2mm thick pvc edge bidding finish. Under strucuture made of 40x40x1.6mm thick ms sq pipe powder 15,331.80 Hundred ThirtyOne Paise Eighty Nos

coated epoxy finish.Shoe cap covered pipe at bottom. Only

DINING TABLE (Type 02) : 2150 L X 800 W X 750HT - Providing and supply Table top made of 25mm thick Prelam

Rupees TwentyOne Thousand

Particle with 2mm thick pvc edge bidding finish.Under strucuture made of 65x65x2.0mm thick ms sq pipe powder

167 14.00 21,487.75 Four Hundred EightySeven Paise Nos

coated epoxy finish.Shoe cap covered pipe at bottom.

SeventyFive Only

CHAIR FOR DINING : Providing and supply MS Pipe 12 Mm Dia Rod Frame,PP Shell Made Of Virgin Polypropylene

Rupees Two Thousand Four

+ Glass Filled, . Recyclable - Nylon Shoes At Frame Bottom & Chrome Plates With Anty Rust Treatment, Stackable.

168 100.00 2,497.73 Hundred NinetySeven Paise Nos

COLORS : RED,GREEN,YELLOW,WHITE,BLACK,GREY.

SeventyThree Only

Single Bed : Providing and Placing Single Bed – 2050mm L X 973mm W X 720mm H1 * 412 H2 mm with

headboard with combination of Tubular Steel, Particle Board and slatted mattress base with headboard. Material:

Headboard panels are made of 18 mm thick Pre laminated Particle board. All the exposed edges should be edge

banded with 2 mm thick PVC edge banding. Bed Leg Frame Structure consists of metal frames made of M.S. 50 x

25 mm box section in 1.2 thicknesses. Internal pipes are made of 19 x 19 mm box section in 0.9 mm thickness. Rupees Eight Thousand Four

169 210.00 Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 8,421.38 Hundred TwentyOne Paise Nos

mm CRCA SHEET Hardware: The High quality hardware should are used. Construction: Knock down construction ThirtyEight Only

Finish: 18 mm thick pre laminated particle board, Bed leg frame structure is powder coated in shade To thickness

of 50 microns (+/- 10) Rest all metals are powder coated in shade to thickness of 50 microns (+/-10) The rate shall

include all materials, hardware and labour etc. complete.

SIDE UNIT : Providing & Placing side Table-440W*418D*503H mm – Storage unit of table should be made of CRCA

steel of 0.6 mm thickness. Above Stand for Bed Side Table should be of M.S. Pipe in 1.2 mm Thickness. The Glass Rupees Six Thousand Six

170 280.00 Top should be Plain Glass in 5.0 mm Thickness. Finish : Epoxy powder coated to the thickness of 50 microns (+- 6,672.06 Hundred SeventyTwo Paise Six Nos

Providing and Placing Single Bed Mattress ,pillow,bedsheet with pillow cover ,with 12mm thick prelam mdf

back- 900x1950x100mm - goldline plus pu form 40 density 300 gsm cottan satin quilt cover.Mattress back putti Rupees Eleven Thousand One

171 210.00 made of 12mm thick prelam mdf bothside white finish.Kurlon dew pillow 600x400 Fill: Polyester Fibre Quality of 11,101.92 Hundred One Paise NinetyTwo Set

shell fabric: 110 GSM cotton satin patti Outer Shell Layer: Cotton Fill Weight (in gms): 650.Bedsheet with pillow Only

100% cotton of bombay dyeing or eq.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

STUDY TABLE : Providing and Supplying study table with 25mm thik Kota Ston Top with, base 19mm Thik

Plywood all proof ( IS 710 ), Overall Size: Width- 900.0 mm Depth- 600 mm Height- +750.0 mm with Drawer as per

Approved sample and Mock up. Materiai: 25mm thik kota stone with polish finish and 19/18 mm plywood base fix

adishive, All the exposed edges are edge banded with 1 mm thick laminate edgefinish with . The high quality

hardware useci Iike Roller Slides (Drawer Channel, Soft Close Drawer Channel, Length - 20-inch, 35kg Capacity,

100% Extension, Strong and Smooth Operation), Hinges minifix, dowels is of make Hettich, if required under

Structure consist of metal frames made of M.S. 25 mm Square Pipes in 0.9 mm Thickness. Drawer assembly Rupees Seven Thousand

172 210.00 consists of drawer made of 19/18mm ply with 1.00 mm Laminate finish, The work shall be done as per the 7,055.85 Nos

FiftyFive Paise EightyFive Only

approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the

Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages,

necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus.

Contractor shall do all the needful and shall fulfill Architect's design intent. No additional claims will be

entertained for this.

STUDY CHAIR : Providing and Placing Unwind chair of 525mm W x 558mm D x 845mm H. The Seat and Back are

made up of injection mouleded high impact strength polypropylene polymer compound with indoor grade UV

resistence. Seat Size 525mmW X 532mmD and Back Size 516mm W X 405mm H. Understructure is made of Rupees Three Thousand

173 210.00 tubular welded frame made from dia 2.2cm ±0.03cm X 0.12cm ±0.0128cm thick and 3.5+/-0.03 cm x 1.5 ± 0.03 3,019.90 Nos

Nineteen Paise Ninety Only

cm x 0.12 ± 0.0128 cm Stainless Steel grade 202 Tube. Tubes are buff polished to give shiny polish.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

CABIN MAIN CHAIR :- Providing and Supplyins High Back Chair. SEAT/BACK A SSEMBLV: The seat is made up of

1.2 + 0.1cm thk. hot pressed plywood measured.The Back is made up of :•nject!or mou1ded glass filled nylon and

upholstered using Mesh fabric wiih high tenacity yarn. * SEAT SIZE : 47 0 cm. (W) x 51 5 cm (D)* BACK SIZE :

cm. (\‘V) x 65.3 cm. (H) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR po!vurethare seat foam is

moulded with density 45+/-2 kg/m° and hardness 16 + 2 kgf as per IS:7888 foi 25 . ercent comorssion.ARMRESTS :

The adjustable armrest is designeo with the following features : • Up-Down adjustment- 8 steps (8 0+0.Scm

range)• Height adjustabie armre°t structure which is Powder Coated and fitted with an armrest top. • Fixed

Armrest Top is PU moulded over metal insert.LUMBAR SiJPPORT ASSEMBLY: The Lumbar suppo consists of

polypropylene pad with moulded polyurethane foam and covered with polyester fabric.The Height of Lumbar pad

can be adjusted through two projecting knobs provided on the rear side of the pa6. Lumbar pad has an adjustment

of 8.0 + 0.5 cm in height. FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is designed Rupees Fourteen Thousand

174 2.00 with the following features. • 360” revolving type.• Single point control.• Front-pivot for tilt with feet resting on 14,136.97 One Hundred ThirtySix Paise Nos

ground ensuring more comfon • Tilt tension adjustment. • 4- position locking with anti-shock feature.• Seat/back NinetySeven Only

tilting ratio of 1:2.PNEUfiJATIC HEiGHT ADJUSTMENT The pneumatic height adjustment has an adjustment stroke

o! 0.0 + 0.* cn° Pedestal Assembly : the pedestal is injection moulded in black 30 Percent glass filled nylon end

f:‹tt c! with 5 ncs. twin wheel castors. The pedestal pitch center dia is 66.1+ 0.5 cm.TWIN WHEEL CASTORS. The

twin wheel castors are injection moulded in black Nylon.NECKREST : The Neckrest assembly consist of

polypropylene pad w'th moulded polyurethane foam and covered with polyester fabric Neckrest is fixed to Back

Assembly through Necki-est connector Neckrest assembly has height adjusti ent of4.2 + 0.5 cm and rotation

aajustment of overall-76’ + 2°. The complete neckrest assembly is retro fit tcv the main chair.The rate shali include

all materials. hardware, and labour etc complete as per instruction of engineer-in charge.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

CABIN CHAIR (FOR VISITOR): Providin.g and Supplyin .Mid Back Chair. SEAT.*B,4CK .6 SITE11BLY: The seat is

made up of 1.2 + 0 1cm thk. hot pressed p!ywood measured.The Back is made up of injection mou1ded glass filled

nylon and upholstered using Mesh fabric with high tenacity yarn * SEAT S!ZE 47 0 cm. (W) x 51 5 cm (D) ” BACK

SIZE 45 0 cm (V'v') x 65.3 cm (H)HTGH RESILIENCE ti-iR) POLYURETHANE FOAM The HR polyurethane seat

foam is moulded with aensity 45+/-2 kg/m° and hardness 6 + 2 kgf as per IS:7888 for 25 Percent compress:

'on.ARMRESTS . The adjustable armrest is designed with the following features • Up-Down adjustment- 8 steps (8

010.Scm range)• Height adjustable armrest structure which is Powder Coated and fitted with an armrest top. •

Fixed Armrest Top is PU moulded over metal insert. LUMBAR SUPPORT ASSEMBLY: The Lumbar support consists

of polypropylene pad with moulded polyurethane foam and covered with polyester fabric.The Height of Lumbar

pad can be adjusted through two proiecting knobs provided on the rear side of the pa6. Lumbar pad has an Rupees Thirteen Thousand Fifty

175 6.00 adjustment of 8.0 + 0.5 cm in hei9ht FRONT PIVOT SYNCHRO MECHANISM: The adjustable tilting mechanism is 13,050.21 Nos

Paise TwentyOne Only

designedwith the following features. 360° revolving type.• Single point control. • Front-pivot for tilt with feet

resting on grouna ensuring more comfort.• Tilt tension adjustment • 4- position lock.ng with anti-shock feature.

Seat/back tilting ratio of 1:2. PNEUMATIC HEiGHT ADJUSTMENT. The pneumatic height adjustment has an

adjustment stroke oi 10.0 z 0.3 cn°.PedestaI Assembly the pedestal is injection moulded in black 30 Percent glass

filled nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch center dia is 66.1+ 0.5 cm.TV'EIN V'EHEEL

CASTORS: The twin wheel castors are injection moulded in black Nylon.The rate shall include all materials,

hardware, and labour etc. complete as per instruction of engineer-in charge.

Providing and Placing Desk let Chair – The seat back Shell is made of 1.2 +/- 0.1 cm, thick hot pressed plywood and

laminated with natural Veneer. Back Size – 42.0 cm (W) X 45.0 cm (H) and Seat Size – 44.0 cm (W) X 40.0 cm (D).

Wooden Arm rest made from laminated veneered Plywood with melamine finish. Tubular understructure made of

MS Tube 1.9+/- .02 cm X 0.16 cm +/- 0.0128 cm thk. And black powder coated DFT 40-60 microns. The desklet to Rupees Five Thousand Two

176 234.00 be fixed to a retractable type mechanism and made of 1.8 +/- 0.05 cm thk medium density fiberboard and 5,226.75 Hundred TwentySix Paise Nos

membrane formed with back 0.04 cm thk. PVC film. The bottom side is provided with balck backing lam. Desklet SeventyFive Only

size; 34.5 +/- 0.1 cm (W) X 26.5 +/- 0.1 cm (D). The below should have paper tray made of 0.4 +/- 0.005 cm MS

wire spot welded to form a mesh.

Gang Chair ( 3 Seater) : Providing and Fixing 3 Seater (moulded foam seat and back In PU upholstery ) Pero Cross

Beam made of powder coated regular MS ERW tube having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/- 0.014 cm size.

Legs to be chrom plated made of rolled steel with 0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated

Rupees Eighteen Thousand

177 4.00 made from cold rolled M.S. Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is 18,003.25 Nos

Three Paise TwentyFive Only

made of chrome Plate solid steel 3.0 cm +/- 0.03cm x 1.2 cm +/- 0.03 cm with fluting and plastic inserts. The Shell

to be assembled on the cross beam with help of M8 Bolts.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Magazine Rack / New paper stand : 900(L) x350 (D) x 1200 (H) : Providing and fixing Magazine rack as per

drawing and ref image made from IS 710 ply with 1.00 mm thik laminate including all type of hardware , fittings

fixtures, as per detailed drawing and instruction of Architect/EIC. Provding and fixing/placing Magazine Rack /

New paper stand as per detail drawing/ref.image.The work shall be done as per the approved shop drawing (to be

prepared by contractor), specifications, mock up sample approved and as directed by the Architect/EIC. The rate Rupees Seven Thousand Four

178 2.00 shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for 7,491.27 Hundred NinetyOne Paise Nos

all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill TwentySeven Only

Architect's design intent. No additional claims will be entertained for this. The unit shall be manufactured in parts

and these parts shall be assembled at site.

KITCHEN EQUIPMENT

Providing and Fixing Clean Dish Landing Table with Angle of Storage for Dishwasher rack Rupees FiftyEight Thousand

(850mmX900mmX850mm) as per Detail specifications,make and approved by Engineer In-charge SeventyFive Only

Providing and Fixing S.S Exhaust Hood With SS Oil Filter (S.S Exhaust Hood S.S 304 , 18 SGW S.S, Oil Filter S.S 304 , Rupees One Lakh Ten

180 2.00 18 SGW S.S ) OF SIZE 3600x900x600 mm as per Detail specifications, make and approved by Engineer In-charge 1,10,342.50 Thousand Three Hundred Rmt

FourtyTwo Paise Fifty Only

Providing and Fixing Exhusht Blower 3 HP 3 Phase ( Motor Kilosker & Crompton ) Heavy duty centrifugal fan for

blower , fabricated from heavy M.S. sheets/channel thickness 5 mm and plates reinforced with angle iron 50 x 50 Rupees EightySeven Thousand

181 2.00 x 5 mm thickness for sturdy and smooth performance dynamically balance impeller fan size 525 mm plate 87,112.50 One Hundred Twelve Paise Fifty Rmt

thickness 5 mm capacity 8000 CFM , pressure 40 mm water gauge , motor 3 HP 960 RPM , 2.25 KW three phase Only

as per Detail specifications,make and approved by Engineer In-charge

Providing and Fixing G.I Ducting 20 SGW, Chimny 15"x15" as per Detail specifications, make and approved by

Rupees Three Thousand Five

182 40.00 Engineer In-charge 3,535.00 Rmt

Hundred ThirtyFive Only

Providing and Fixing Two Burner Gas Range with 1 u/s of size 1200x600x800 mm as per Detail specifications, make

Rupees FourtyFour Thousand

and approved by Engineer In-charge.

183 2.00 44,717.75 Seven Hundred Seventeen Paise Rmt

SeventyFive Only

Providing and Fixing Chapati Plate with Puffer of size 1000x600x800 mm as per Detail specifications, make and

Rupees ThirtyFour Thousand

184 2.00 approved by Engineer In-charge. 34,845.00 Rmt

Eight Hundred FourtyFive Only

Providing and Fixing Dough kneader with Capacity : 10 Kgs , Elt. Motor : 1 H.P of size 38"x19"x35" inches as per Rupees FiftyEight Thousand

185 2.00 Detail specifications, make and approved by Engineer In- charge. 58,075.00 Rmt

SeventyFive Only

Providing and Fixing Pulveriser with Capacity : 25 Kgs , Elt. Motor : 1 H.P, 1 phase RPM-2800 of size 19"x17"x24"

Rupees FourtyTwo Thousand

inches as per Detail specifications, make and approved by Engineer In-charge.

186 2.00 42,975.50 Nine Hundred SeventyFive Paise Rmt

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and Fixing Stock Pot Range with 1 u/s of size 600x600x700 mm as per Detail specifications, make and

Rupees TwentySix Thousand

approved by Engineer In-charge.

187 2.00 26,133.75 One Hundred ThirtyThree Paise Rmt

SeventyFive Only

Providing and Fixing Counter Top with 1 u/s of size 47"x25"x34" inches as per Detail specifications, make and Rupees Twenty Thousand

188 2.00 approved by Engineer In-charge. 20,326.25 Three Hundred TwentySix Paise Rmt

TwentyFive Only

Providing SS 304 Grade Utensil Storage Rack in Store of 2000mm W X 2250mm H X 900mm D size as approved b y

Rupees TwentySix Thousand

Engineer In Charge

189 4.00 26,133.75 One Hundred ThirtyThree Paise Rmt

SeventyFive Only

Bain Marie Rupees FourtyEight Thousand

190 2.00 Providing and Fixing Bain Marie 6+1 Bowl (06 round bowl,+ 01 Rectangular Bowl total 07 bowl) of size 47” X 25” X 48,202.25 Two Hundred Two Paise Rmt

34” As per Specifications. TwentyFive Only

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two Rupees SeventyTwo Paise

metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and SixtyFive Only

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two

Rupees NinetyOne Paise

192 420.00 metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and 91.84 Rmt

EightyFour Only

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two

Rupees One Hundred Nineteen

193 92.00 metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and 119.15 Rmt

Paise Fifteen Only

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two Rupees One Hundred

194 351.00 metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and 148.12 Rmt

FourtyEight Paise Twelve Only

fixing the same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two Rupees One Hundred

195 288.00 metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and 195.67 NinetyFive Paise SixtySeven Rmt

fixing the same with adhesive solvent, including cost of all materials. Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing laying and jointing in true line and level 65mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp at every two Rupees Six Hundred Seventy

196 74.00 metre C/C or shall be concealed as directed including necessary fittings etc. including testing of pipe and joints and 670.64 Rmt

Paise SixtyFour Only

fixing the same with adhesive solvent, including cost of all materials.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making Rupees Two Hundred Eight

good the wall, ceiling and floor etc. complete. [B]20mm. Paise Eighty Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of

approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Rupees Nine Hundred Nine

Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 15 mm Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of

approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Rupees One Thousand Eight

199 7.00 Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 25 mm 1,818.00 Nos

Hundred Eighteen Only

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of

Rupees Two Thousand Seven

approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and

200 3.00 2,777.50 Hundred SeventySeven Paise Nos

Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 32 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of

approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and Rupees Three Thousand Five

201 39.00 Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 40 mm 3,595.60 Hundred NinetyFive Paise Sixty Nos

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of

Rupees Four Thousand Eight

approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and

202 32.00 4,898.50 Hundred NinetyEight Paise Fifty Nos

Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 50 mm

Providing, fixing, jointing and testing, heavy quality cast bronze / brass BALL VALVE / OR WHEEL valves of Rupees Six Thousand Five

203 4.00 approved make, including flanges / unions, nuts, bolts, washers, etc. complete, as approved by the Architect and 6,560.96 Hundred Sixty Paise NinetySix Nos

Engineer-in-charge for water supply lines of the following Nominal bore (NB) size: 65 mm Only

Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non return valve confirming to IS

with screwed / flanged ends, 20 Kg/m2 of approved make, on water supply lines of the following Nominal bore Rupees Two Thousand Five

(NB) size: 50 MM Hundred TwentyFive Only

Providing, fixing, jointing and testing, heavy Quality Gun metal or brass Non return valve confirming to IS

with screwed / flanged ends, 20 Kg/m2 of approved make, on water supply lines of the following Nominal bore Rupees Two Thousand One

(NB) size: 40 MM Hundred TwentyOne Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

INTERNAL DRAINAGE

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed

Rupees Eight Hundred

206 953.00 on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm 876.90 Rmt

SeventySix Paise Ninety Only

center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.(Soil + Waste + Rain Water)

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following

outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making Rupees Two Hundred Eighty

good the wall ceiling and floor. (F) 75mm - Balcony + Standing Balcony + AC Drain Paise Three Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following Rupees One Hundred

208 109.00 outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making 173.71 SeventyThree Paise SeventyOne Rmt

good the wall ceiling and floor. (E) 50mm for waste water Only

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following

outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making Rupees One Hundred

good the wall ceiling and floor.(D) 40mm for waste water for Sink ThirtyOne Paise NinetySix Only

Providing, fixing, jointing and testing IS 14735 for Drain PVC SWR 'P' - traps of self cleansing design with water

seal not less than 50 mm., with or without vent, cutting chases / hole in floors / slabs and bringing the same in

210 150.00 proper condition and shape after placing the trap in right position in case of suspended / open plumbing or setting 606.00 Rupees Six Hundred Six Only Nos

the trap in 1:2:4 CC in case of concealed plumbing , etc. complete, as required. The trap shall be 'P' type, of

following sizes: 110 x 110 mm OD inlet / outlet

Providing and fixing Heavy class S.S. grating with Mosquito proof S.S. strainer of Chilly or equivalent make, as

approved, (cockroach trap) including setting in floor with cement mortor to match with floor finish as per Rupees Four Hundred Nineteen

architect requirements. Paise Fifteen Only

Providing and fixing in position cowel went to pipes.(C) 100mm dia Rupees Five Hundred Five Paise

Providing and fixing in position cowel went to pipes.(B) 75mm dia.

Rupees Three Hundred

NinetyThree Paise Four Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain-100mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or hinge dgrating including the cost of cutting and making Rupees Five Hundred EightySix

good the walls. Paise TwentySeven Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

EXTERNAL DRAINAGE

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of Rupees Three Hundred

the following internal diameter with collars and butt ends prepared for collar joints including testing of joints FiftyNine Paise EightyFour Only

complete.(C) 250mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty non-pressure pipes I.S. class NP2 of

Rupees Two Hundred Fifty

216 11.00 the following internal diameter with collars and butt ends prepared for collar joints including testing of joints 250.54 Rmt

Paise FiftyFour Only

complete.(B) 150mm

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame Rupees One Thousand Two

217 29.00 of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 1,292.19 Hundred NinetyTwo Paise Each

Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard pattern) te weight of Rupees Four Hundred

218 29.00 cover to be not less 4.53 Kg.) 497.14 NinetySeven Paise Fourteen Each

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

Rupees Two Thousand Nine

) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

219 3.00 2,932.93 Hundred ThirtyTwo Paise Each

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

NinetyThree Only

cement on walls and bed concrete etc. complete.(i) Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line.

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having

crushing strength not less than 35Kg/ Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg.

Rupees Seven Thousand One

) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

220 14.00 7,180.44 Hundred Eighty Paise Each

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

FourtyFour Only

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x 850 mm and 450mm deep for

pipe lines with three or more inlets.

Extra over items 24.44 for every additional depth of 0.1M. Of part thereof beyond 450mm depth for Brick

Rupees Three Hundred

221 21.00 masonry chamber.(iii) for 600mm x 850mm size. 325.59 Each

TwentyFive Paise FiftyNine Only

C.I. Cover without frame 455mm x 610mm

Rupees Nine Hundred SixtyFive

Paise FourtyNine Only

C.I. Cover without frame 600mm x 850mm Rupees Four Thousand Three

223 14.00 4,331.02 Hundred ThirtyOne Paise Two Each

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- cement :2-coarse sand : 4-graded stone aggregate

20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size)

inside plastering 15mm thick with Cement Mortar 1:3 (1-Cement : 3-coarse sand) finished with a floating coat of

neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2- Coarse sand :4-stone aggregate

20mm nominal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and Rupees Eleven Thousand

224 2.00 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be not less 11,042.74 FourtyTwo Paise SeventyFour Each

than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using brick Only

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A type

depth 0.90 Metre for 150mm diameter sewer.

(I) Extra rate for constructing B.B. masonry for every additional depth of 0.1M. or Part thereof over item No.24.27 Rupees Five Hundred

225 5.00 (I) for depth from 0.9M to 1.5M. 522.96 TwentyTwo Paise NinetySix Each

Installing, testing and commissioing of Pump system comprising of horizontal Submersible Pumps with SS casing,

SS impeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ., motor running at 2900 rpm speed and shall be

supplied with all accessories viz., base plate, coupling, motor, VFD based control panel, dry run & overload

Rupees Fifty Thousand Five

226 4.00 protection, cabling up to panel, earthing, GI medium duty suction, delivery & header pipes, pressure gauge, 50,500.00 Set

pressure switches, pressure transmitter, suction ball valves & delivery ball valves & check valves etc., complete.

200 lpm., @ 40mtr. HEAD , (To GROUND FLOOR TO TERRACE TANK) FOR DOMESTIC WATER

Rupees EightySeven Thousand

Providing, Testing & Installation of Submerrsible pressure system for Garden & Site plan area 100 lpm., @ 30mtr.

227 1.00 87,112.50 One Hundred Twelve Paise Fifty Set

Supply, installation, testing & commissioning of Water level controller for the OH tanks with switches, hardwares, Rupees Ten Thousand One

interlocking with panel, etc. For Under Ground tank & OH Tank Hundred Only

Constructing masonry Soak well with mesonery work bottom side 6'' PCC work, with minimum 9'' thik brick wall

Rupees One Lakh FourtyFive

with 30% opening in wall area, with Top side 6'' RCC Slab, 400x400 Inspection chamber, top side with FRP cover

229 2.00 1,45,187.50 Thousand One Hundred Set

fitting, 110mm Air vent line. Dia 3.0 Meter x 6 meter Depth

EightySeven Paise Fifty Only

S.I.T.C. submersible pump set for bore of 200 mm. dia. or more having 3 phase motor capacity about 50-55 H.P

Rupees One Lakh Seventeen

discharge capacity having . Lifting and Lowering taken extra. (A) ( 13 Stage) 100 to 400 L.P.M. discharge at the

230 1.00 1,17,502.39 Thousand Five Hundred Two Each

head 182 to 265 mtrs. suitable for 80 mm dia. Delivery pipe Cat.III

Paise ThirtyNine Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Electric Motor Driven Hydrant Pump

Supplying,Installing, testing and commissioning of Fire authority approved Electrical driven fire pump suitable for

automatic/ manual operation consisting of the following-Rates for erection of pump only Horizontal split casing,

high pressure, single/ multistage centrifugal type fire pump having cast iron body, bronze impeller,stainless steel

shaft & capable of delivering 1680 LPM against a total head of 60 Mtr while running at 2900 RPM complete with

proper connection to suction and delivery line, and including bypass arrangement for testing of pumps as per the

requirement. Suitable mechanical seal with mounting aggangement shall be included, having a name plate

indicating suction, delivery, head, discharge, stages, RPM and direction of rotation. Y Stainers at pump input shall

be provided as per manufacturer requirements. Pump shall be capable of furnishing not less than 150% of rated

capacity at a head not less than 65 % of rated head. The shut off head shall not exceed 120% of rated head.

Rupees One Lakh EightyOne

231 1.00 Squirrel cage, induction motor, TEFC type suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply, of suitable HP rating 1,81,800.00 Set

Thousand Eight Hundred Only

for the above pump with synchronous speed of 2900 RPM conforming to IP 55 protection & class 'F' insulation.

The motor shall conform to IS 325 1978 (up to date) with flexible coupling and coupling guard . With Pressure

Guage and Pressure switch. Factory Fabricated Common base plate for mounting pump and motor fabricated of

mild steel channel as per manufacturer's recommendation with heavy duty Anti Vibration pads (4 Nos., heavy

duty). Grouting bolts to be provided and installed by vendor at his cost Flexible Coupling and coupling guard for

direct coupling of pump and motor. Drain Pipe with Valve Main Fire Pump Discharge : 1680 LPM, Pumping Head

: 60 M, Pump Size : 40 HP Rate should included interconnection cables and Cable box if reqd for cable conn. to

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Electrical Motor Driven Jockey Pump For Hydrant System Location - Plant Room-Rates for erection of pump only

Supplying,Installing, testing & commissioning of fire authority approved electrically driven Jockey pump suitable

for automatic/manual operation consisting of the following: Horizontal / Vertical mounted multistage jockey

pump having cast iron body, S.S. impeller, stainless shaft with mechanical seal capable of delivering 600 LPM

against total head of 60Mtr while running at 2900 RPM complete. The system shall be complete with necessary

pressure gauge with gun metal shut off cock on delivery side including bypass arrangement for testing of working

of the pumping set as required. The pump should meet the requirement of IS 15105:2002 and must be approved

by the local fire authority. Y-Stainers at pump input shall be provided as per manufacturer requirements. Squirrel

cage induction motor suitable for 415 + 10%V, 3 phase, 50 Hz, AC supply of suitable HP rating for the above pump

Rupees SeventyTwo Thousand

232 1.00 with synchronous speed of 2900 RPM T.E.F.C type connected to pump with flexible coupling and coupling guard . 72,720.00 Set

Seven Hundred Twenty Only

With Pressure Guage and Pressure switch. Factory fabricated Common base plate for mounting pump and motor

fabricated of mild steel channel as per manufacturer's recommendation with heavy duty 4 Nos. Anti Vibration

pads.(Cushy foot) . grouting bolts to be provided and installed by the vendor at his cost Suitable reinforced

cement concrete pump foundations as per manufacturer's design including foundation bolts, washers as

required.Drain pipe with valve (25 mm dia) Jockey Pump :-Discharge : 600 LPM Pumping Head : 60 MTR Pump

Size : 10 HP Rate shall include inter connecting cables and cable box if reqd for cable conn to motor

Supplying, Installation, Testing and commissioning of Diesel engine driven fire pump suitable for automatic

operation and consisting of following: Horizontal type, centrifugal End Suction pump of cast iron body & bronze

impeller , mechanical seal to ensure a minimum pressure of 3.5 kg / sq.cm. at highest and farthest outlet at Rupees Three Lakh FourtyEight

233 1.00 specified flow of 1680 LPM@ 60M. head conforming to IS 1520. with M.S.fabricated common base plate, coupling, 3,48,450.00 Thousand Four Hundred Fifty Set

coupling guard, foundation bolts etc . as required Diesel Fire Pump Discharge : 1680 LPM (30 LPS) / 108 m3/hr Only

Pumping Head : 60 M Pump Size : 40 HP

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Fire pump panel (Combined for All Pumps) and electrical works - Starter panel with star delta or as per CFO

approved starters rated to suite pump HP with necessary protection feautres like SPP / ELR / OL / SC / phase and

on off indicating lamps. The busbars shall be of Al - 0.8 A / sq mm size. Panel shall be fabricated from 14G sheet

steel with seven tank process powder coated and shall be min IP 52. Panel shall have Ammeter / Voltmeter and

KWh meter. Cabling / earthing from panel to pump shall be scope of vendor without any extra cost. Cabling -

supply / laying and terminating, shall be Al XLPE armoured / Cu XLPE armoured / as per manufacturers

specifications with necessary terminal box to terminate the cables. Panel shall be rated min for 25KA fault level. Rupees Two Lakh TwentyTwo

Cable trays - hot dip GI ladder type 16 gauge with required supports shall be used for cabling. Panel shall have one Thousand Two Hundred Only

incomer MCCB / ACB of required rating where by incoming supply and earthing shall be terminated by electrical

contractor.Starters shall be suitable for respective motors.panel to take inputs from pressure switch/on-off switch

. Flow switch wiring shall be in suitable mms pvc consuits. Panel should be manufactured by CPRI approved panel

Supply, Installation, testing and commissioning of CAST IRON Y-TYPE STRAINER (flanged) PN-1.6 ; body - C.I., Rupees Fifteen Thousand Three

235 1.00 Screen stainless steel a.150 mm dia 15,326.75 Hundred TwentySix Paise Each

SeventyFive Only

Supplying,Installing, testing & commissioning of dial type Pressure Guage having 100 mm dial & range of 0-15 Rupees Two Thousand One

236 3.00 Kg/cm2 with syphon and cock. 2,151.30 Hundred FiftyOne Paise Thirty Each

Supplying,Installing, testing & commissioning of Pressure Switch required accessories Rupees Two Thousand Twenty

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete

Rupees Four Thousand Eight

238 2.00 with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required.a.150 mm dia 4,848.00 Each

Hundred FourtyEight Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete

Rupees Four Thousand Four

239 8.00 with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required.b.100 mm dia 4,444.00 Each

Hundred FourtyFour Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete

Rupees Three Thousand Eight

240 1.00 with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required.c.80 mm dia 3,838.00 Each

Hundred ThirtyEight Only

Supply, installation, testing and commissioning of butterfly valve PN 1.6, with s.s seat duly lSI marked complete

Rupees Three Thousand Eight

241 1.00 with Nuts, Bolts, washers, gaskets, confirming to IS 13095, of following sizes as required.d.50 mm dia 3,838.00 Each

Hundred ThirtyEight Only

Supplying,Installing, testing & commissioning of CI dual plate non-return valve of following sizes conforming to IS:

5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required.a.150 mm dia. Rupees Five Thousand Two

Hundred FiftyTwo Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying,Installing, testing & commissioning of CI dual plate non-return valve of following sizes conforming to IS:

5312 complete with rubber gasket, GI bolts, nuts, washers etc. as required. b.65 mm dia Rupees Four Thousand One

Hundred FourtyOne Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees One Thousand Four

244 347.00 painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and 1,428.14 Hundred TwentyEight Paise Mtr

testing after Installation etc. as per specifications complete as required. a.150 mm Fourteen Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees One Thousand Two

245 84.00 painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and 1,232.20 Hundred ThirtyTwo Paise Mtr

testing after Installation etc. as per specifications complete as required. b.100 mm Twenty Only

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Nine Hundred

246 158.00 painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and 949.40 Mtr

FourtyNine Paise Fourty Only

testing after Installation etc. as per specifications complete as required. c.80 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Seven Hundred

247 126.00 painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and 717.10 Mtr

Seventeen Paise Ten Only

testing after Installation etc. as per specifications complete as required. d.65 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Five Hundred

248 126.00 painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and 585.80 Mtr

EightyFive Paise Eighty Only

testing after Installation etc. as per specifications complete as required. e.50 mm

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Four Hundred

249 84.00 painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and 494.90 Mtr

NinetyFour Paise Ninety Only

testing after Installation etc. as per specifications complete as required. f.40 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

Rupees Four Hundred

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including

250 410.00 449.45 FourtyNine Paise FourtyFive Mtr

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and

testing after Installation etc. as per specifications complete as required. g.32 mm

Supply, Installation, Testing and Commissioning of the following sizes of flange jointed / screwed / welded, M.S.

Pipes of Class C (Medium class) ISI marked including accessories such as MS bracket, U clamps with Anchor

fasteners, tees / elbows / reducers / couplings / unions / bends / flanges etc., and laying on the surface including Rupees Two Hundred FiftyTwo

painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and Paise Fifty Only

testing after Installation etc. as per specifications complete as required. h.25 mm

Supplying,Installing, testing & commissioning of Weather proof standard fire hose cabinet (750 mm x 600 mm x

300 mm deep) made out of 16 SWG powder coated M.S. sheet having single or double opening glazed (4.0 mm

thick glass) shutter including necessary locking arrangement by allen key, stove enamelled Fire red finish (as per IS Rupees Five Thousand One

: 5, shade no. 536) with " Fire Hose" marked on front, suitable for housing 2 nos. 15m long 63 mm dia Hose pipe, 1 Hundred FiftyOne Only

No. branch pipe & nozzle spanner. (For External Hydrant)

Supply, Installation, Testing and Commissioning of Weather proof Standard Fire Hose Cabinet wall mounting type

(450 mm x 600 mm x 250 mm deep) having single or double opening with necessary locking arrangement by allan Rupees One Thousand Eight

key suitable for housing 1 nos. hose pipe, 1 no. Branch pipe & nozzle spanner. Hundred Eighteen Only

Supply ,installation, testing and commissioning S.S. Single Headed Fire Hydrant Valve with 80mm N.B. flanged

inlet, 63 mm dia female instantaneous outlet type. S.S. coupling, blankcap, chain, twist release type lug & all Rupees Three Thousand Thirty

254 8.00 accessories Conforming to IS:5290. Including fixing with supports, flanged tapping from wet riser,orifice plate 3,030.00 Each

complete as required by the Local Fire Authority.

Supply, installation, testing and commissioning non-percolating rubber reinforced lined fire Hose pipe (as per Rupees Three Thousand Two

255 8.00 IS:903) of 63 mm dia and 15 mtrs long. 3,232.00 Each

Hundred ThirtyTwo Only

Supply, Installation, Testing and commissioning of 63 mm dia instantaneous pattern aluminium short branch pipe Rupees Eight Hundred Eight

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Supply, installation, testing and commissioning of First Aid Hose Reel equipment conforming to IS:884 comprising

of hose reel drum, 8 mm shut off nozzle, Rubber hose reel tubing as per IS: 444 of 25 mm dia x 45 mtr. long, Rupees Four Thousand One

painting, Manual fix type with fixing bracket, anchor fastener, bolts & nuts etc. complete as required by Local Fire Hundred FourtyOne Only

Supply, installation, testing and commissioning of SS Ball Valve. Rupees Eight Hundred Eight

(a) 25mm dia Only

Supply, installation, testing and commissioning of Cast lron Four Way Fire Brigade Inlet as per IS:904 having

Rupees Four Thousand Eight

259 1.00 mm dia inlet with blank cap and chain with necessary fittings, flanges, nut bolts etc. complete as required. 4,848.00 Each

Hundred FourtyEight Only

Supply, Installation, Testing and Commissioning of Gun Metal Air Release Valve with necessary fittings. Size:

Rupees Three Thousand Five

260 2.00 mm (For Riser) 3,535.00 Each

Hundred ThirtyFive Only

Supply, Installation, Testing and commissioning of Quartzoid Bulb type Sprinkler Heads. Rupees Three Hundred

(a) Pendent Sprinkler 57°C - standard response FiftyThree Paise Fifty Only

Supply, installation, testing and commissioning of ABC type Fire Extinguisher of 6.0 kg confirm to IS:15683, with Rupees One Thousand Four

262 8.00 ISI marked / TAC approved fitted with required accessories including wall suspension brackets. 1,424.10 Hundred TwentyFour Paise Ten Each

Supply, installation, testing and commissioning of Carbon Dioxide (Co2) type Fire Extinguisher of 4.5 kg confirm

Rupees Three Thousand Eight

263 8.00 to IS:15683, with ISI marked / TAC approved fitted with required accessories including wall suspension brackets. 3,838.00 Each

Hundred ThirtyEight Only

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and

264 8.00 606.00 Rupees Six Hundred Six Only Each

specification consisting of following items. a.Manual call point:

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and Rupees Seven Hundred

specification consisting of following items. b.Hooters: FiftySeven Paise Fifty Only

Supplying,Installing, testing & commissioning of fire alarm and pump trigger system as per requirement and Rupees Three Hundred

specification consisting of following items. C. Pump On / Off switch: FiftyThree Paise Fifty Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

Rupees Ninety Paise Ninety

267 105.00 PVC insulated stranded wire of green colour for earth continuity of following size. (fire alarm and pump trigger 90.90 Mtr

system) (A) With medium class Rigid PVC pipe and accessories (e) 4 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

Rupees SixtyTwo Paise

268 105.00 PVC insulated stranded wire of green colour for earth continuity of following size. (fire alarm and pump trigger 62.62 Mtr

system) (A) With medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly Rupees SeventySeven Paise

painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary SeventySeven Only

grouting, cementing, plastering & finishing complete.

Painting of above ground lines with two coats of red oxide primer and two coat of sinthetic enamal paint (PO.Red)

Rupees One Hundred

EightyTwo Paise Twenty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: a."Fire Hydrant": 4" X 12" Rupees Two Hundred FiftyTwo

Paise Fifty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: b."DCP" Extinguisher: 8" X 4" Rupees One Hundred FiftyOne

Paise Fifty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: c."CO2" Extinguisher: 8" x 4" Rupees One Hundred FiftyOne

Paise Fifty Only

Supplying of AUTOGLOW Signages in Block / Small Letters of Specified Sizes: d."In case of Fire, do not use lift, use Rupees Three Hundred

staircase": 8" x 8" FiftyThree Paise Fifty Only

Coating & Wrapping for underground pipe Wrapping Tape(150mm wide x 4mm thick) bitumen-based polymeric Rupees Seven Hundred Seven

tape (like IWL Pypkote or Clexo) is ideal. Only

Getting Approval NOC of Fire protection system from local fire authority and any other relevant statutory Rupees One Lakh FourtyFour

authority at initial and various other stages of work including preperation of report / drawings as per fire Thousand Eight Hundred

authority. SeventyFive Paise NinetyNine

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate modules Rupees Four Hundred

erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as EightyFive Paise EightyOne Only

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat.

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected complete

with earth continuity and necessary connection with primary light with accessories erected on Metal / PVC / Rupees One Hundred

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open / concealed wiring. with SixtySeven Paise SixtySix Only

necessary Lamp holder / ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan regulator mounted and accessories with earth continuity Rupees Six Hundred

278 216.00 of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with 674.68 SeventyFour Paise SixtyEight Point

textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary Only

ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 Rupees Five Hundred Ten Paise

a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with medium class Rigid PVC Five Only

pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate Rupees Eight Hundred

280 121.00 modules erected on / in wall / ceiling as per pipe erected with following type of accessories [III] For 16A Plug and 871.63 SeventyOne Paise SixtyThree Point

16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board. (f) with Only

medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules Rupees Two Hundred

erected on / in wall / ceiling with following type accessories. Cat-III FiftySeven Paise FiftyFive Only

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe Rupees Six Hundred Three

erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (f) with medium class Paise NinetyEight Only

Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat-III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front plate , modules erected with necessary connections as Rupees TwentyFive Paise

per site situation directed by Engineer In charge. Blank Plate Single cat III TwentyFive Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall

or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with Rupees ThirtyThree Paise

following dia of pipes, in approved manner as directed. (B)25 MM ThirtyThree Only

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees SixtyTwo Paise

285 5489.00 PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC 62.62 Mtr

pipe and accessories (a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS Rupees EightyTwo Paise

286 534.00 PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC 82.82 Mtr

pipe and accessories (b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in

following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated Rupees One Hundred Twelve

287 966.00 stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and 112.11 Mtr

Paise Eleven Only

accessories (a) 2 wire 4 sq. mm

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed

Rupees One Thousand One

1 no. 6A/16A universal plug-switch combined.

288 2.00 1,133.22 Hundred ThirtyThree Paise Each

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III

Lighting Fixtures ,Fan & other items

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in aluminium casted

body with company mark/name 160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt , Rupees Two Hundred Twenty

LED driver efficiency > 85 % Paise Eighteen Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20

(i) 5-9 watts,Surge-2 KVcat-III

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Rupees Five Hundred

290 1404.00 Luminaire efficacy> 85 lumens/watt , 589.84 EightyNine Paise EightyFour Each

LED driver efficiency > 85 % Only

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips

complete.IP20 (iii) 16-20 watts, Surge-2 KV cat-III

Supplying and erecting LED tube light/ Ultra slim 4 ft aluminium batten Rupees Nine Hundred FiftyNine

a) 40w e26 LED tube light Paise Fifty Only

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Rupees Five Hundred ThirtyFive

292 31.00 Luminaire efficacy> 85 lumens/watt ,LED 535.30 Each

Paise Thirty Only

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Tube Light

with integral driver (v) 36-40 Watts, Surge-2 KV, IP-20, conventional 4 feet

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> Rupees Seven Thousand Two

293 9.00 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 7,266.95 Hundred SixtySix Paise Each

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage NinetyFive Only

capacity between the ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must

have 440VAC line supply with over-voltage protection. (v) above 90-120 Watt

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick

box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per

requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on Rupees Five Hundred Fifteen

pole with cable clamps& earth bolt of following size of box. Paise Ten Only

(B) 250mm x 200mm x 100mm [deep]

Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-2019), THD <

Rupees Two Thousand Eight

10%, with remote unit for Speed Control and all remaining accessories including safety pin, nut bolts, washers,

295 216.00 2,885.57 Hundred EightyFive Paise Each

temperature rise = 75 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit with surge, over

FiftySeven Only

current and overload protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as required.[ Make shall

be approved by Engineer in Charge] (B) 1200 mm Sweep (48")

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan Rupees One Hundred Eight

complete with proper insulation without leakage and earthing. Paise Seven Only

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up to 50mm length each

Rupees One Hundred Eight

297 216.00 side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with 108.07 Each

Paise Seven Only

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Rupees Eighteen Paise Eighteen

Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt Rupees One Thousand Seven

299 46.00 lowers & square frame.For 200mm with 1350 RPM cat-ii 1,703.87 Hundred Three Paise Each

EightySeven Only

Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and

above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> Rupees Five Thousand Nine

300 48.00 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80 certificates)(NOTE: Below 5,976.17 Hundred SeventySix Paise Each

description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage Seventeen Only

capacity between the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection. iii) 60 - 90 watts Cat-lll

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Street Light poles & other items

Supplying & erecting Galvanized M.S pipe post “B” class 88.9 mm O.D 4 mtr. Long duly painted with two coats of Rupees Three Thousand Two

301 48.00 aluminium paint complete with metallic base plate of 300 mm x 300 mm x 4mm thick for using as a compound 3,225.94 Hundred TwentyFive Paise Each

light pole with approx. weight 32 Kg. NinetyFour Only

Supplying and erecting Pole base suitable for following size of pole fabricated from 4 mm. Thick M.S. sheet with

M.S.door having two hinges welded on M.S. flat 25 x 3 mm which is fitted on M.S..base by bolts welded inside the Rupees Two Thousand Two

302 48.00 pole base erected with one coat of Red oxide and two coats of Aluminium paint. Outside dimension as per SOR. 2,269.47 Hundred SixtyNine Paise Each

drawing. (A) Suitable for 90 mm.dia base of pole FourtySeven Only

Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick

box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors as per

requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on Rupees Eight Hundred

pole with cable clamps& earth bolt of following size of box. NinetyEight Paise Ninety Only

(A) 300mm x 200mm x 100mm [deep]

Providing and erecting street light pole bracket comprising main B Class GI pipe of 4.2 cm/require outside dia.

complete with suitable B Class G.I sleeve tubing of approx. 45cms.length and suitable for 76.5 mm / 80mm. /

require size pole top having sufficient fasteners for fixing the brackets and having spread of 1 mtr. length with Rupees Six Hundred Fourteen

304 48.00 suitable rise as per site condition & suitable welded stiffener reducer and nipple with check nut complete painted 614.08 Each

Paise Eight Only

with one coat of Red oxide / PU base primer and two coats of Aluminium / PU paint. paint with following nos of

arms. [a] Single Arm bracket 1 Mtr

Supplying & erecting approved make Digital time switch having lithium cell 6 years operative and operate battery

backup 1 channel day clock with 14 memory programme, suitable to operate on 240V + 5%, 16A with, floating

Rupees Three Thousand One

contacts Minimum switching setup time 1 minimum & LCD display. Also comprised permanent ON/OFF switching.

305 1.00 3,168.37 Hundred SixtyEight Paise Each

Programming switches & housed in fire proof thermoplastic enclosure & transparent cover erected as required

ThirtySeven Only

with necessary connection erected as directed.

Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per direction Cat III (D) 4 Rupees Two Thousand Seven

306 1.00 pole 440V 40 Amp. 2,782.55 Hundred EightyTwo Paise Each

Panel & Switchgear

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 Rupees Six Thousand One

307 12.00 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to 6,173.12 Hundred SeventyThree Paise Each

work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 Twelve Only

G.M.S. housing. ICS=100% of ICU only Cat III

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

35 KA. at 415 V. having Normal current rating 200A.with variable Thermal & magnetic release suitable to work on Rupees Sixteen Thousand Two

308 4.00 A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 16,221.61 Hundred TwentyOne Paise Each

G.M.S.housing. ICS=100% of ICU only Cat III SixtyOne Only

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

KA. and above at 415 V . having normal current rating 250A. with variable thermal & magnetic release suitable to Rupees Twenty Thousand Nine

309 4.00 work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 20,946.39 Hundred FourtySix Paise Each

G.M.S. housing. ThirtyNine Only

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of

Rupees TwentyFive Thousand

KA and above at 415 V having Normal current rating 400A. with variable Thermal & magnetic release suitable to

310 2.00 25,228.79 Two Hundred TwentyEight Each

work on A.C.supply 50 c/s. With all internal connections, spreader tinned copper & complete erected in existing

Paise SeventyNine Only

G.M.S. housing.

Supply of Approved make Iron Clad or metal clad four pole change over switch 415V. confirming to IS of Rupees TwentySix Thousand

311 1.00 following capacity (B) 400 A Cat-lll 26,106.48 One Hundred Six Paise Each

FourtyEight Only

PANEL MOUNTING BUSBARS

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos.

of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped Rupees Two Thousand Two

312 10.00 with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus 2,204.83 Hundred Four Paise EightyThree Rmt

bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary Only

connections. (D) Suitable for 400 Amp. capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos.

of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped

Rupees One Thousand Four

with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus

313 20.00 1,469.55 Hundred SixtyNine Paise Rmt

bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary

connections. (C) Suitable for 300 Amp. capacity

Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos.

of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped

Rupees One Thousand

with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus

314 30.00 1,037.27 ThirtySeven Paise TwentySeven Rmt

bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting Approved make Earth fault Relay suitable to mount with inter connection suitable to

following size of moulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip Rupees Five Thousand Four

315 1.00 220V AC. with all internal connections & complete erected in existing M.S.housing.. 5,415.62 Hundred Fifteen Paise SixtyTwo Each

(3) 250 A -400 A , CT Ratio 1/400 Only

Providing & erecting 415 V MCB Four pole switch for motor & Inductive Load (C curve) having 10 KA breaking

Rupees Seven Hundred

316 22.00 capacity & confirms to IS : 8828 in existing M.S box having following capacity: (c) 63 Amp. Cat- III 737.30 Each

ThirtySeven Paise Thirty Only

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking Rupees Two Hundred

317 101.00 capacity & confirms to IS : 8828 in existing box having following capacity. (A) 6-32 Amp. CAT-iii 299.97 NinetyNine Paise NinetySeven Each

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking

Rupees Three Hundred Thirty

318 3.00 capacity & confirms to IS : 8828 in existing box having following capacity. (B) 40 Amp. CAT-iii 330.27 Each

Paise TwentySeven Only

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of Rupees Two Thousand Two

319 20.00 quick action & tripping with all advance feature & do not incorporate any electronic component. for following 2,235.13 Hundred ThirtyFive Paise Each

Max. rating erected as directed. (ii) 40Amps. DP Cat. III Thirteen Only

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of Rupees Two Thousand Six

320 7.00 quick action & tripping with all advance feature & do not incorporate any electronic component. for following 2,654.28 Hundred FiftyFour Paise Each

Max. rating erected as directed. (iii) 63 Amps. DP Cat. III TwentyEight Only

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system

Rupees One Hundred Twelve

321 647.00 and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark .Cat.III 112.11 Each

Paise Eleven Only

(3 ph DB + LDB) Cat. III

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house Rupees Eight Hundred

322 85.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single 885.77 EightyFive Paise SeventySeven Each

phase incoming and horizontal single phase outgoing. (b) sheet steel double door (IP43) (ii)6- way Only

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

Rupees One Thousand One

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single

323 7.00 1,152.41 Hundred FiftyTwo Paise Each

phase incoming and horizontal single phase outgoing.( b) sheet steel double door (IP43) (iii)8 way

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house Rupees Two Thousand Nine

324 1.00 appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three 2,913.85 Hundred Thirteen Paise Each

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel EightyFive Only

double door (ii)6 way

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

Rupees Three Thousand Eight

appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three

325 9.00 3,874.36 Hundred SeventyFour Paise Each

phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel

double door (iv)12 way

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears,

Rupees Fourteen Thousand

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib,

326 15.00 14,902.55 Nine Hundred Two Paise Sqm

bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. (B) The standard companies switch gear shall be used and only manufacturers at CPRI

approved factory (i) with 350mm depth

Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor type cubical panel

board necessary IP-42 and above protection as per approval from engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears,

BUSBARS, suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, Rupees Fourty Thousand Nine

327 3.00 bakelite control fuses/MCB for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base 40,999.94 Hundred NinetyNine Paise Sqm

Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end NinetyFour Only

terminal connection,danger notice board,necessary ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. (B) The standard companies switch gear shall be used and only manufacturers at

CPRI approved factory (iv) with 1000 mm. depthh

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly Rupees SeventySeven Paise

painted with one coat of red oxide with erection on site as per direction of engineer in charge with necessary SeventySeven Only

grouting, cementing, plastering & finishing complete.

Lightning Arrester

SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm long. Air Termination Base Rupees Nine Thousand Four

329 2.00 tested for conditioning, Ageing Test & Lightning impulse current withstand test: 100 kA of 10/350µs waveform in 9,416.23 Hundred Sixteen Paise Each

an accredited Third party laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 TwentyThree Only

mm long- Cold Galvanized

SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and use exclusively for

lightning protection (Vertical Riser/Down Conductor which shall be concealed in Column OR Flushed on) to meet

the requirement of IS IEC 62305 With Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm dia

tail connector used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For

Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross Connector to connect Earth fixing

Rupees Seven Hundred

point to vertical raiser/Down conductor, SS Straight Splicer at every 4 Mtr to connect MS conductor in column,

330 100.00 728.21 TwentyEight Paise TwentyOne Mtr

Bonding /Rebar Clamp at every 3 mtr suitable for interconnecting round conductor with reinforcement inside the

concrete for structural earthing system, SS connector -To connect external conductor 8- 10 mm with earth fixing

point. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for conditioning & Ageing Test & 6.4 for

Lightning impulse current withstand test: 100 kA of 10/350µs waveform(Ageing & Electrical test )

SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 micron copper bonding

& 1 bag of Carbon fill Based environment friendly backfill tested as per IEC 62561-7 in NABL accredited Rupees Five Thousand Nine

331 4.00 Laboratory and suitable stainless Steel double sided clamp. Eco Friendly rust proof heavy duty weather proof 5,992.33 Hundred NinetyTwo Paise Per set

Polyethylene Earth Pit Chamber with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm ThirtyThree Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising,

connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for following type of applications with chamber and heavy duty cover

(A)(approved make OEM has to submit test certificate including value of earth resistance of installation duly

Rupees Ten Thousand Five

stamped and signed by agency and officer Incharge has to ensure the value of earthing resistane mentioned in test

332 10.00 10,593.89 Hundred NinetyThree Paise Each

Certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter

EightyNine Only

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must

be submitted by Agency. (c) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing,

A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in normal soil. Length of

Pipe : 3.00 mtrs Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be Rupees Two Hundred Twenty

laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 35 Sq. Paise Eighteen Only

mm ( 16 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to

Rupees Three Hundred

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

334 105.00 378.75 SeventyEight Paise SeventyFive Mtr

(D) 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Rupees Five Hundred Fourty

(F) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) Paise ThirtyFive Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to

Rupees One Thousand One

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

336 143.00 1,168.57 Hundred SixtyEight Paise Mtr

(I) 3 1/2 core 240 Sq. mm( 120 Sq. mm 1/2 core)

FiftySeven Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Copper conductor for 1.1 KV. to be Rupees Two Hundred

337 2468.00 laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cable. 287.85 EightySeven Paise EightyFive Mtr

(B) 3 core 4 Sq. mm Only

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV.

Rupees Three Hundred

338 55.00 to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of 364.61 Mtr

SixtyFour Paise SixtyOne Only

cables. (B) 4 core 4 Sq. mm

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand / Solid Copper conductor for 1.1 KV.

Rupees Five Hundred Ten Paise

339 110.00 to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of 510.05 Mtr

cables. (C) 4 core 6 Sq. mm

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Rupees One Hundred

(A) 4 core 16 Sq. mm FiftyThree Paise FiftyTwo Only

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables Rupees One Hundred Ninety

(B) 4 core 25 Sq. mm Paise EightyNine Only

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees ThirtyThree Paise

342 12.00 complete with out going tails, insulating tape etc for following size of cables. 33.33 Each

ThirtyThree Only

(A) 2 to 4 core 2.5 / 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees ThirtyEight Paise

343 10.00 complete with out going tails, insulating tape etc for following size of cables. 38.38 Each

ThirtyEight Only

(B) 2 to 4 core 6 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable

Rupees FourtySeven Paise

344 16.00 complete with out going tails, insulating tape etc for following size of cables. 47.47 Each

FourtySeven Only

(D) 2 to 4 core 16 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees SixtySix Paise SixtySix

345 10.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (A) 3 & 1/2 66.66 Each

/ 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees SeventyFive Paise

346 10.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 75.75 Each

SeventyFive Only

core 35/50 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees One Hundred Three

347 6.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (C) 3 & 1/2 103.02 Each

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees One Hundred Fourty

348 4.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 3 & 1/2 140.39 Each

Paise ThirtyNine Only

core 120 Sq. mm

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC

Rupees Two Hundred

349 4.00 insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (G) 3 & 1/2 238.36 Each

ThirtyEight Paise ThirtySix Only

core 185 Sq. mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

350 24.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 6.06 Rupees Six Paise Six Only Each

manner. (A) 1.5/ 2.5/4/6 Sq.mm

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees Fifteen Paise Fifteen

351 52.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 15.15 Each

manner. (C) 16/25 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees Twenty Paise Twenty

352 20.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 20.20 Each

manner. (D) 35/50 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees TwentyFive Paise

353 12.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 25.25 Each

TwentyFive Only

manner. (E) 70 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

Rupees FourtyFive Paise

354 12.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 45.45 Each

FourtyFive Only

manner. (G) 120 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with

355 8.00 high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved 80.80 Rupees Eighty Paise Eighty Only Each

manner. ( I ) 185 Sq.mm.

Providing and fixing approved make Perforated C type cable tray. Made from sheet steel. The cable tray should

be single or double bended as per required and as per IS 2062/1079 and shall be coated with hot dip galvanizing

as per IS 2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI hardware like nut - bolt Rupees Six Hundred

and washers etc. erection with necessary support( included) as per Specification and as per instruction of TwentyTwo Paise Sixteen Only

engineer in charge. (5) 300 X 50 X 2.0 mm Thick

Danger Sign boards

Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for Rupees SixtyNine Paise

MEDIUM VOLTAGE installation to be erected as per IS-2551. SixtyNine Only

Providing & erecting Medium Voltage Danger Notice Board sticker as per language suggested by engineer Rupees TwentySix Paise

incharge of standard size as per IS-2551 TwentySix Only

HUME & DWC PIPE

Rupees Three Hundred

359 75.00 Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor 343.40 Mtr

FourtyThree Paise Fourty Only

with necessary material in an approved manner and making the ground as per original. (C) 300 mm dia

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS

14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying Rupees NinetyFive Paise

360 500.00 of cable. below ground / road surface for enclosing cable 95.95 Mtr

NinetyFive Only

(C))90 mm outer dia

Making trench in all soil of suitable width of 90 cm deep for laying cable or locating the fault all over the run and Rupees FiftyFive Paise FiftyFive

back filling the same and making the surface as normal ground. Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for Rupees One Hundred Thirty

treatment of person suffering from Electric shock with minimum 50" diagonally size. Paise TwentyNine Only

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.

Rupees Two Hundred Fourteen

Paise Twelve Only

Supplying rubber matting of following thickness as per IS:15652/IEC 61111 Rupees One Thousand

364 20.00 (b)4mm 1,027.17 TwentySeven Paise Seventeen Sqm

Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge

Rupees Two Hundred

bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic

365 2.00 299.97 NinetyNine Paise NinetySeven Each

solution (Savlon or similar) etc. (All above contents shall be of standard makes)

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at

bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand Rupees Two Hundred Fourteen

provided or hung on wall hook. Paise Twelve Only

Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a

367 4.00 60.60 Rupees Sixty Paise Sixty Only Each

depth of minimum 15 cms.

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

(a) General Features & Special Features of the all lift items shall be taken as below.

(b) for Handicap Lifts, Minimum 10 Passengers Lift Capacity shall be considered.same is to be informed to

architect /civil authority to keep necessary size of lift well. (c) The lifts of 15/ 16 and above passenger capacity

shall be taken for Hospital Lifts; Where in Description “ Stretcher Lifts” shall be mentioned. (d) The Rates of the

following items are for the lift of Machine room less. For Machine room Lifts, rate for Rs. 1,50,000/- shall be

deducted in Total Cost for the Lifts from 4 to 13 Passenger Lift. Rs. 2,00,000/- shall be deducted in Total Cost for

the Lifts 15 and above passenger capacity as extra cost. (e) Add Rs. 80,000/- for the DUPLEX control for the lifts up

to 10 floors and add Rs. 10,000/- for additional each floor above 10 floors. (A) GENERAL DESCRIPTION OF LIFTS.

[1] GEAR LESS LIFT DRIVE (MRL) comprising of High Starting torque Lift 3 phase 440 V A. C. Permanent Magnet

Synchronous motor of proper rating with high efficiency shall be used.[2] Micro processor based / PLC, ACVVVF,

vector control drive with encoder feedback closed loop system shall be used for lift car and door operation which

shall be full collective selective operation hall call demand response, UP/DOWN hall stops, Main, Up/ Down

Contactor with overload and phase reversal relay and safety controls.[3] Car with M S platform with bracings of

adequate size and to sustain the impact load cabin + passenger with safety factor of fire for steel and side panels

of Stainless steel of sheet of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED

ceiling lights. Car flooring shall be of s/s 304 chaker plate design sugeested of engineer in charge. of engineer in

charge. Car doors shall be of stainless steel grade 304, hairline finish with centre opening / telescopic automatic

doors. Car panel will also be S.S. 304 finished with emergency stop device, mechanical door safety device, facility

of auto/ attended mode. All car panel buttons and all floor switches must be with brail language as per lift act.[4]

All landing doors must be fire rated for 2 hour shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking facility from outside[5]

Appropriate battery operated emergency light in the car along with alarm

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

switch shall be provided. Also, Emergency Light & Fan should start immediately without any Time Delay as soon as

power fails. [15] Lift machine hoisting arrangement in the lift machine room and monkey ladder for lift pit should

be provided by the lift agency, along with the other steel structure works, foundations for the machine etc… [16]

In the hoist way fascia plate shall be provided without any extra cost, where ever required as / if directed by

engineer in charge. [17] Permanent wiring with necessary safety devices like RCCB in all circuit, Over Voltage

Under Voltage protection and THD eliminator in circuit for lift machine room and lift well with proper numbers of

light points, with fixtures, exhaust fan and plug points shall be provided by the agency. Only 3 phase Power Supply

shall be made available by department in lift machine room. Necessary Earthing as per Lift Act/Rules shall be

arranged by Lift Agency. [18] Any civil/ electrical works for additional and alteration in lift shaft and machine room

related to erection of lift shall be made by lift agency without any extra cost. (granite/marble fixing around all

landing door openings are not in lift agency’s scope.) [19] Agency has to provide all working drawings and

documents and liaison services for obtaining all necessary permission from lift inspector and other authorities.

[20] acrylic transparent licence/display A4 size holder in lift car [20A] As per statutory requirement of Govt. Of

Gujarat lift & escalator act 2000, lift agency has to provide 1. Car top safety barricade 2. Push & talk

communication system. 3. Fireman's switch operation at Ground Floor. 4.carrying out third party lift inspection

during/after lift erection and provide report by third party authorized by concern licensing authority 5.agency

has to provide third party insurance upto completion of free maintenance period and submit the document for the

same.[21] Car Panel Operating Buttons with floor position indicator/buttons must be of Auto Glow type clearly

visible when view from inside cabin.[22] For Physically Handicapped person Full Length Handrails of hairline finish

steel grade of 304 should be provided at appropriate height on the Rear & Side Wall Panels in Lift Car. [23] With

Necessary KVA rating voltage controlled Stabilizer suitable for your controller, drive and all equipments of lift. [24]

Necessary rating of DP Elcb and FP Elcb required for lift is in scope of work which rating is sugested by CEICED

Department (electrical Inspector)

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

(B) SPECIAL FEATURES DESCRIPTION OF LIFTS for PREMIUM category

1. Advanced control system dual 64 bit embedded microprocessor with CANBUS Serial Communication mode

including Regenerative power efficient operation,on site programming facility, Anti nuisance, Pte-opening,

BMS/RMS with necessary online real time monitoring system having necessary connectivity for remote monitoring

& other suitable supporting hardware & software devices to fulfil the purpose.2. Floor Indication LCD Display with

call registration & brail mark with arrival gong and hall lantern & TFT Screen in the car with MP3 Voice

Announcer.3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line / Honeycomb for car and all Rupees Eighteen Lakh Fifteen

368 2.00 Doors, All landing doors must have fire rating up to 2 hours and car door must have multi-level crisscross beam 18,15,111.40 Thousand One Hundred Eleven Each

door protection. 4. To & fro communication system & wiring (i.e. car , control room & guard room ) and Each Paise Fourty Only

elevator are equipped with remote monitoring system.agency has to provide mobile app and user id and

password for monitoring Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift having

following main features: 13 Passengers, Ground plus 3 upper floors with Rated Speed of 1.0 m/sec., ((C) With

General PLUS ADDITIONAL SPECIAL FEATURES attached herewith. Cat.III.

Providing & erecting approved make overload non-start feature & overload warning Indicator system in the lift

with making use of sound isolated floating platform & micro switches on SI frame to get sensation of live load

inside lift cage at any given moment, with provides new fixtures of overload warning inside lift cage with new relay Rupees ThirtyTwo Thousand

369 2.00 in the existing control panel to activate ‘Overload Non-Start Function with carrying out additional wiring including 32,527.05 Five Hundred TwentySeven Each

laying of new travelling cable, include minor civil work & without changing the existing capacity speed stops, travel Paise Five Only

& operation of the desired lift

Meters & Panel Accessories

Rupees One Thousand Two

Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 digits LED display, 0 to

370 28.00 1,275.63 Hundred SeventyFive Paise Each

AC Volts range erected on existing panel board with all connection, wiring etc .with manufacturers calibration

SixtyThree Only

Supplying and erecting approved make panel mounting type Digital Ammeter having 3 digits LED display,

Rupees One Thousand Five

external CT operated, calibrated for 0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing panel

371 28.00 1,558.43 Hundred FiftyEight Paise Each

board with all connection, wiring etc .with manufacturers calibration certificate.

FourtyThree Only

Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V on existing panel

Rupees Three Hundred

372 56.00 board with necessary connections. 317.14 Each

Seventeen Paise Fourteen Only

Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in Rupees Two Hundred

373 28.00 existing CRCA box duly secured with insulating materials connected to the meter 274.72 SeventyFour Paise SeventyTwo Each

Supplying and erecting approved make set of indicator lamps of LED type lamp, lens cover, Bakelite holder Rupees FourtyThree Paise

complete erected with necessary connections. FourtyThree Only

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost

charger with IGBT base rectifier & Inverter & sealed maintenance free SMF batteries. The charger having

Rupees One Lakh Thirty

operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor

375 1.00 1,30,103.15 Thousand One Hundred Three Each

with battery, over/under voltage output with over load & short circuit protection equipment. The system housed

Paise Fifteen Only

in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10%

Overload capacity for momentary load. (D) 5 KVA with 1Hr Backup

Solar PV System

Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with Solar Panels

(ALMM approved): Frame Material : Anodized Aluminum alloy Frame With Twin Wall Profile, Front Cover : High

Transmission Low-Iron Tempered Glass (AR Coated), High efficency and positive power tolerance Pmax: 0/+5,

Module Efficiency should be approx. 18%-21%, Normal operating temperature 45'C, Junction Box with

Waterproof IP67 & MC4 Compatible and Enclosed with Bypass diodes, 100% Electroluminescence test to ensure

error free Modules, Thep. temp. co-efficient of the PV module shall equal or better than -0.45%/degree C. Solar PV

modules of minimum fill factor 75% to be used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg) With

year Product warranty and 25 year Linear Power Warranty., Solar Inverter: MPPT Range: 80-1000 V, Max

efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) ≤4000, O/p Power Factor: ~1, O/P

THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding Protection:

Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor Detection Integrated, Residual Current

Monitoring Unit Integrated, Output Over Current Protection Integrated, Output Short Circuit Protection Rupees ThirtyNine Thousand

376 100.00 Integrated, Output Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD & 39,802.08 Eight Hundred Two Paise Eight PER KW

APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: Seamless Box Pipe / 'C' Channel of Only

suitable size for rooftop solar installations with good stability agaist wind & weight load., Hot Dipped Galvanized

steel coils. suitable arrangement for base plate for foundation , solar panel mounting, the structure should be

suitable for carry the load of solar panel,wiring, sprinkler system etc. with necessary foundation work/wall mount,

j bolt, anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304) quality. and Balane of

System with necessary Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting wiring,

earthing system, lightining arrester system, all liasoning work with various gov. dipartment like state nodal

agency,DISCOM & CEIG is included in agency scope (Excluding GEDA Application fees, Solar connectivity Charges,

Meter connectivity Charges, Meter testing Charges.) (F) Grid Tied Solar Power System: 101 - 250 kW (3 - phase)

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Diesel Generating Set

Supplying and erecting, commissioning and testing of Diesel Generating set confirming to IS: 4722:1968 &

BS:5514 having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacity at

1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil

cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure

gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to cover,

joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment complete with

standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy

duty Residential type exhaust silencer (With DEF System) and vertical hot air duct both logged with asbestos rope,

save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping

and drip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of

delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming Rupees Ten Lakh TwentyNine

377 1.00 to IS-4722- 1968 with voltage regulation +/- 5% of rated voltage from no load to full load. Both the engine and 10,29,194.04 Thousand One Hundred Each

alternator fitted on a common fabricated steel base plate with antivibration mounting engine and alternator NinetyFour Paise Four Only

both connected to each other by flexible flange coupling and with floor/wall mounted control panel box

comprising of voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, indicator lamps

duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity

armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound

absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at

least 40 mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes,

sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms.DG set should have in built fuel tank

capacity of minimum 8 hrs of continous running capacity on full load . Erection, commissioning and satisfactory

testing as per requirement with first filling of fuel

(minimum up to the 80% of fuel tank capacity), oil, etc. with guarantee / Warrantee of complete system for Two

years. & with obtaining all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are

as below. (As per new CPCB4+ Emission norms Engine With - Turbo Charger, EGR (Exhaust Gas Recirculation),

CRS (Common Rail Fuel System), DOC (Diesel Oxidation Catalyst), SCR (Selective Catalytic Reduction), Integrated

wiring harness connected to ECU .) (M) Continuous rating of 125 KVA ,BHP not less than 154 BHP

Name of Work : Construction of Sports Hostel at Lalavadar District Sports Complex Dist. Amreli

Estimated Rates

but may Item of Work Unit

be more In Words

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with

variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly

Rupees FiftySix Thousand Three