Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.0 LAccepted-AOC | L1 | Accepted-AOC Accepted Lowest amount | |
| 2 | L2₹6.9 L+₹94,464 (15.8%)Rejected-AOC | L2 | Rejected-AOC Rejected higher amount | |
| 3 | L3₹7.0 L+₹1.1 L (17.9%)Rejected-AOC | L3 | Rejected-AOC Rejected higher amount |
Tender Value
₹6.3 L
EMD Value
₹15,706
Closing Date
27 Dec 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rijesh A
Assistant Executive Engineer Irrigation-Mechanical Subdivision perumbavoor
GENERAL-Cheerakkuzhi -CSM-2022-23 Urgent repair work of damaged shutter and shutter frame work of surplus escape near chainage 28/500km 33/400km and 36/650km. including pynkulam and panjal branch canal shutters.-General Mechanical Work
2022_Irrig_537895_1
IRR/MH/TR/5239/2022_16_1_1/1
Open Tender
Repair and Maintenance Works
Item Rate
180 days
Cheerakkuzhy
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,385
Yes
₹15,706
Yes
20 Jan 2023
9 Dec 2022
31 Dec 2022
9 Dec 2022
27 Dec 2022
9 Dec 2022
9 Dec 2022 - 27 Dec 2022
Amount
DEMOLISHING AND CONCRETING - chainage 28/500km 33/400km and 36/650km
15.3:Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars and disposal of unserviceable material with in 50 metres lead as per direction of Engineer -in-Charge.
4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns
4.1.2:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:1/2:3 (cement : 11/2 coarse sand : 3 graded stone aggregate 20 mm nominal size)
SUPPLY FABRICATION AND ERECTION OF EMBEDDED PARTS- chainage 28/500km, 33/400km and 36/650km
OD10467/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance<br>charges
OD10466/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including<br>cost of conveyance charges
OD10465/2022-2023:Supply of MS round bar including cost of conveyance charges
OD10503/2022-2023:Fabrication and erection of Embeded parts for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied
SUPPLY FABRICATION AND ERECTION OF SHUTTER
OD10484/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance<br>charges
OD10483/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including<br>cost of conveyance charges
OD10505/2022-2023:Fabrication and supply of Struchural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge/ Platform and accessories etc. For the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied<br>
85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
OD10508/2022-2023:Erection of the Canal Shutter (Up to 2 Tonne weight) /Hoisting Bridge/ Platform including hand rails, ladders etc for the same including. alignment correcting and setting complete including cost of labour, machinery, incidential and conveyance, lead and lift charges charges etc complete but excluding cost of material already supplied<br> Rate Analysis for 10qtl erection
SUPPLY FABRICATION AND ERECTION OF HOISTING BRIDGE and HOISTING MECHANISM
OD10487/2022-2023:Supply of MS plates confirming to IS 2062GrB including cost of conveyance<br>charges
OD10486/2022-2023:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including<br>cost of conveyance charges
OD10485/2022-2023:Supply of MS round bar including cost of conveyance charges
OD10509/2022-2023:Fabrication and supply of Struchural steel canal shutters ( Up to 2 tonne weight ) /Hoisting Bridge/ Platform and accessories etc. For the same as per approved specifications, drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied<br>
85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site
OD10511/2022-2023:Providing EN-8 screw rod 7.5 tonne capacity 4 m lift screw hoist having one number of EN-8 screw shaft having a lifting speed of around 5 cm/min for 24rpm of hand operation including cost of all materials, labour, hire charges and conveyance. 1 m screw rod dia. 67 mm with single start square thread with head pitch of 12.7 mm. root dia. 62.3 mm. and EN-8 shaft
OD12077/2022-2023:Providing of worm and pinion having a lifting speed of around 5.00 cm/min of hand operation including cost of all materials, labour, hire charges and conveyance.
OD12708/2022-2023:Providing base and nut arrangement for hoisting the shutter including cost of material, labour etc for casting, machining and assembling including cost of all materials, labour etc. Complete
OD10512/2022-2023:Erection of the Canal Shutter (Up to 2 Tonne weight) /Hoisting Bridge/ Platform including hand rails, ladders etc for the same including. alignment correcting and setting complete including cost of labour, machinery, incidential and conveyance, lead and lift charges charges etc complete but excluding cost of material already supplied<br> Rate Analysis for 10qtl erection
MOHAMMED MUSTHAFA V
ASHIFUL HAK.C
Bidder Name
MOHAMMED MUSTHAFA V
ASHIFUL HAK.C
Fabtech Engineers and Contractors
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_782363.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .