Renovation/upgradation of existing 300 bedded kitchen block for provision of Shifting main kitchen and STC kitchen area for bakery setup.

Select, Excess (+), Less (-)

Tender Inviting Authority: <Sports Authority of India>

Name of Work: <Repairing/renovation of existing 300 bedded kitchen for shifting main kitchen and STC kitchen for bakery setup at NCOE Sonepat >

Name of the Bidder/ Bidding Firm / Company :

Sl. No. Service Description Item Code / Make Quantity Units Estimated Rate in Rs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder in Rs. P Excise Duty Amount in INR Rs. P GST Amount in INR Rs. P Freight Charges ( Unloading & Stacking) in Rs. P Any Other Taxes in Rs. P Any Other Duties/Levies in Rs. P IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

3 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

3.1 For thickness of tiles 10 mm to 25 mm item1 Sqm Excess(+) Full Conversion INR

4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

4.1 In cement mortar item2 10 Cum Excess(+) Full Conversion INR

5 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

5.1 Of area 3 sq. metres and below item3 8 Each Excess(+) Full Conversion INR

6 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. item4 3 Cum Excess(+) Full Conversion INR

7 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin-charge. item5 15 Sqm Excess(+) Full Conversion INR

8 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

8.1 All kinds of soil item6 75 Cum Excess(+) Full Conversion INR

9 Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. item7 60 Cum Excess(+) Full Conversion INR

10 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

10.1 Cement mortar 1:6 (1 cement : 6 coarse sand) item8 6.5 Cum Excess(+) Full Conversion INR

11 12 mm cement plaster of mix :

11.1 1:6 (1 cement: 6 coarse sand) item9 50 Sqm Excess(+) Full Conversion INR

12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. item10 300 Sqm Excess(+) Full Conversion INR

13 Finishing walls with Acrylic Smooth exterior paint of required shade :

13.1 New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm) item11 50 Sqm Excess(+) Full Conversion INR

14 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

14.1 Two coats item12 250 Sqm Excess(+) Full Conversion INR

15 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

15.1 Two or more coats on new work item13 100 Sqm Excess(+) Full Conversion INR

16 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) item14 100 Kg Excess(+) Full Conversion INR

17 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

17.1 Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm item15 15 Sqm Excess(+) Full Conversion INR

18 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

18.1 25 mm thick item16 100 Sqm Excess(+) Full Conversion INR

19 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. item17 20 Sqm Excess(+) Full Conversion INR

20 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

20.1 20 mm nominal dia Pipes item18 75 Mtr Excess(+) Full Conversion INR

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. item19 300 Sqm Excess(+) Full Conversion INR

22 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. item20 300 Sqm Excess(+) Full Conversion INR

23 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. item21 50 Sqm Excess(+) Full Conversion INR

24 Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc. item22 12 Mtr Excess(+) Full Conversion INR

25 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. item23 850 Kg Excess(+) Full Conversion INR

26 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 600 mm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. item24 300 Kg Excess(+) Full Conversion INR

27 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately).

27.1 Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 item25 98 Sqm Excess(+) Full Conversion INR

28 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

28.1 With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) item26 10 Sqm Excess(+) Full Conversion INR

29 Fixing of existing doors/windows of size 3 sqm or below. item27 8 Each Excess(+) Full Conversion INR

30 Electrical Works

31 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.

31.1 Group B item28 20 Point Excess(+) Full Conversion INR

32 Wiring for light/ power plug with 2X4 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required item29 50 Mtr Excess(+) Full Conversion INR

33 Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

33.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire item30 40 Mtr Excess(+) Full Conversion INR

33.2 2 X 4 sq. mm + 1 X 4 sq. mm earth wire item31 40 Mtr Excess(+) Full Conversion INR

33.3 2 X 6 sq. mm + 1 X 6 sq. mm earth wire item32 40 Mtr Excess(+) Full Conversion INR

33.4 4 X 10 sq. mm + 2 X 6 sq. mm earth wire item33 50 Mtr Excess(+) Full Conversion INR

33.5 4 X 16 sq. mm + 2 X 6 sq. mm earth wire item34 50 Mtr Excess(+) Full Conversion INR

34 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

34.1 25 mm item35 150 Mtr Excess(+) Full Conversion INR

34.2 50 mm item36 120 Mtr Excess(+) Full Conversion INR

35 Supplying and laying DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required

35.1 120 mm dia (OD-120 mm & ID-103 mm nominal) item37 120 Mtr Excess(+) Full Conversion INR

36 Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

36.1 15/16 A switch item38 6 Each Excess(+) Full Conversion INR

36.2 6 pin 15/16 A socket outlet item39 6 Each Excess(+) Full Conversion INR

37 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

37.1 3 Module (100mmX75mm) item40 3 Each Excess(+) Full Conversion INR

37.2 6 Module (200mmX75mm) item41 3 Each Excess(+) Full Conversion INR

38 Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required

38.1 3 Module item42 3 Each Excess(+) Full Conversion INR

38.2 6 Module item43 3 Each Excess(+) Full Conversion INR

39 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required

39.1 Triple pole and neutral item44 5 Each Excess(+) Full Conversion INR

40 Supplying and fixing following rating C curve MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40.1 63Amp TPMCB item45 3 Each Excess(+) Full Conversion INR

40.2 63Amp FPMCB item46 3 Each Excess(+) Full Conversion INR

41 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator).

41.1 4 way (4 + 12), Double door item47 2 Each Excess(+) Full Conversion INR

42 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

42.1 12 way (4 + 36), Double door item48 2 Each Excess(+) Full Conversion INR

43 Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.

43.1 63 A TP&N item49 4 Ecah Excess(+) Full Conversion INR

44 Supplying of ISI marked XLPE insulated and PVC sheathed armoured aluminium conductor power cable of 1.1 KV grade confirming to IS:7098 (Part-1) 1988 of following size etc as reqd.

44.1 3.5 x 95 sq.mm item50 100 Mtr Excess(+) Full Conversion INR

44.2 3.5 x 25 sq.mm item51 25 Mtr Excess(+) Full Conversion INR

45 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

45.1 Upto 35 sq. mm item52 25 Mtr Excess(+) Full Conversion INR

45.2 Above 35 sq. mm and upto 95 sq. mm item53 100 Mtr Excess(+) Full Conversion INR

46 Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.

46.1 510 mm sweep item54 10 Each Excess(+) Full Conversion INR

47 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. item55 10 Each Excess(+) Full Conversion INR

48 LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED

48.1 18 watt item56 10 Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select %

Please Enable Macros to View BoQ information