Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.5 LAccepted-AOC HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹54.8 L+₹3.3 L (6.42%)Rejected-Finance G 16 JAY COMPLEX BELOW UMA CO OP BANK NIZAMPURA VADODARA 390 002 | VADODARA | VADODARA | GUJARAT | 390002 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | Rejected-Technical 4 A RUKSHMANI PARK SOCIETY OPP SAMA WATER TANK NEW SAMA ROAD VADODARA 390 008 | VADODARA | VADODARA | GUJARAT | 390008 | - | Rejected-Technical Contractor is two class below the eligible class required for this work class C hence firm do not satisfy eligibility criteria as per NIT Hence rejected |
Tender Value
₹58.2 L
EMD Value
₹1.1 L
Closing Date
28 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) CHILODA
HQ CWE (AF) Chiloda Military Engineer Services P.O CRPF Campus Vayu Shakti Nagar Gandhinagar 382042
RAISING OF PLINTH AT SITE 21 WATER PROOF TREATMENT AT SITE 24 AND OTHER MISCELLANEOUS WORKS AT AF STN BARODA
2023_MES_576400_2
82139/BRD/E8
Open Tender
Civil Works
Item Rate
180 days
Baroda
As per tender document
7 documents required · 7 mandatory
₹1,000
GE (AF) BARODA
₹1.1 L
Yes
22 May 2023
24 Mar 2023
6 May 2023
24 Mar 2023
28 Apr 2023
15 Apr 2023
25 Mar 2023 - 14 Apr 2023
Amount
Demolition of cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing of debris and rubbish to outside of MD land complete all as specified and as directed
Taking down cement plaster any description on brick or stone wall/ celling including raking out joint, hacking for key scrubbing with water etccomplete all as specified and as directed.
M&L Hard core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed by Engr-in-Charge.
M&L Moorum /red bajri filling in floor and paving laid in layers n.exc 15cm thick each layer , spread and levelled and rammed including watering & rolled with hand roller complete all as specified and as directed by Engr-in-Charge.
M & L Precast Cement Concrete block masonry 1:3:6, type C1 using 20mm graded stone aggregate with solid blocks, exc. 10 cm in width built in cement mortar 1:6, complete all as specified and directed by Engr-in Charge.
M&L PCC 1:2:4 Type B-1 using 20mm graded aggregate as in coping ,cover fillet of 75 mm radius at junction of roof slab and parapet wall etc complete all as specified and directed by Engineer-in-Charge.
Supply only integral water proofing compound.
S&F 30mm thick Flush door shutters, solid core construction, with block board core and plywood face panels, and both faces covered with decorative face veneer with lipping/frame to match complete all as specified.
S&F 100 mm long SS butt hinges and fixed to frame/chowkats with screwed or welding complete all s specified..
S&F 150mm long aluminium anodized barrel tower bolts of extruded section and fixed.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified
S&F 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.
S&F 1.00mm Steel rolling shutters, with ball bearing, gear operated type with bevel gear box and crank handles, Safety lever locks mild steel with 4 levers all as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,manual type complete all as specified.
Removing of existing unserviceable water proofing treatment taking down cement plaster,PCC etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish to outside MD land complete all as specified
M&L Applying cold bituminous primer @ 0.30 Ltr / Sqm conforming to IS 3384 laying APP polymer modified membrane 3mm thick 3 Kg/Sqm in weight with non-woven polyester reinforcement with plain finish and sealing all overlaps of 75mm in length side and 75mm on width side of membrane by torching the same as per manufacturer's instruction and all as per particular specification including application of solar reflective aluminium paint all as specified and directed by Engr-in Charge Note:- (a) Necessary guarantee certificate shall be given by the manufacturer for satisfactory performance the material for 10 years from the date of completion of work. (b) APP membrane treatment shall be done firstly at corners and junction of parapet wall 30cm on vertical position and 30cm on horizontal position shall be done with proper attention and work carried out by authorised applicator only. Main portion of roof treatment shall be commenced only on completion of corners/edges/junctions. (c) APP membrane shall be taken upto outside of the parapet wall to an extent of 150mm minimum. (d) Ensure while laying the treatment no bulging on surface/voids shall be found and proper care/attention be given for the treatment. (e) If any work executed at site without any authorised applicator, the same shall be rejected and no payment shall be consider. (f) Contractor shall produce the certificate from the manufacturerer conforming the authority granted to the authorised applicators for execution before commencement of work.
M&L 100mm thick Plain Cement Concrete 1:4:8 ,type D-2 using 40mm graded crushed stone aggregate as in sub base to floor finished rough to receive floor finishes, complete all as specified and as directed by Engr-in-Charge.
M&L 150mm thick Plain Cement Concrete 1:2:4, type B-1 using 20mm graded crushed stone aggregate) as in flooring including mixed with approved metallic floor hardener at the rate of 3.20 Kg/50 kg bag of cement finished surfaces rough , complete all as specified and as directed by Engr-in-Charge. Note : Metallic floor hardener shall be measured and paid separately under respective item
M&L Brushing neat cement slurry with 3.20 kg of cement per SQM over concrete surface complete all as specified and directed by Engr-in-Charge
Supply only metallic floor hardener
M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregates as in plinth protection , finished surfaces even and smooth without using extra cement, complete all as specified.
M&L10mm thick plastring in CM 1:3 mixed with water proofing compound 3% by weight of cement finished even and smooth with out using extra cement as in ceiling complete all as specified
M&L 15mm thick screed bed or bedding layer in CM 1:4 mixed with WPT 3% by weight of cement finished even and smooth with out using extra cement over roof all as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth with out using extra cement as in ceiling complete all as specified
M & L 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 mixed with water proofing compound 3% by weight of cement on faces of brick/block masonry wall, finished even and fair etc complete.
M&L Preaparation of new plastered wall surface and applying three coats of white wash on wall surface complete all as specified and directed
M&L Preaparation of new plastered wall surface and applying three coats of white wash on ceiling surface complete all as specified and directed
M&L Preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint camouflage pattern over alkali resistant priming coat on walls upto 15 mtr high including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed by Engineer-in-Charge.
M&L Complete removal of existing treatment by scraping down completely on brick walls/stone walls/concrete surfaces plastered or un plastered thoroughly, rubbing down, washing with water and applying two coats of Cement Base Paint camouflage pattern (Colour or shade as approved by GE) over alkali resistant priming coat as per manufacturers instruction complete all as specified directed by Engineer-in-Charge
M&L Complete removal of existing treatment by scraping down completely on ceiling surfaces plastered or un plastered thoroughly, rubbing down, washing with water and applying two coats of Cement Base Paint camouflage pattern (Colour or shade as approved by GE) over alkali resistant priming coat as per manufacturers instruction complete all as specified and directed by Engineer-in-Charge
M&L Preparation on the existing surfaces of walls/concrete surfaces as directed and applying two coat white wash on old decorated surface including scraping ,rubbing down with water cleaning the surface up to the entire satisfaction of the Engineer-in-Charge.
M&L Preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.
M&L Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade 'A', complete all as specified and as directed by Engineer-in-Charge.
City Light
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .