Construction of Control Room Building and JE/SBA Quarter at 3.15MVA,33/11KV Receiving Station Makol Sunderbani , District Rajouri on Turn Key basis

Amount

Earth work in excavation by manual means over areas (exceeding 30 cm and upto 1.50 mtr in depth, 1.50 mtr in width as well as 10 sqm on plan) incl. disposal of excavated earth upto 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed. All kinds of soils.

Filling available excavated earth (excluding rock) in trenches, plinth slides of foundations etc in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead up to 50 m and lift up to 1.5 m

Providing and Laying in position cement concrete of specified grade excluding the cost of centring and shuttering-All work up to plinth level 1:4:8(1 cement4 coarse sand:8 graded stone aggregate 40 mm nominal size) crushed. Foundations;

Supplying and filling in plinth with fine sand under floors including watering, ramming, consolidating and dressing complete.

Providing and fixing upto floor five level precast cement concrete cover slabs incl. Hoisting and setting in position with cement mortar 1:3(1 cement:3 coarse sand)cost of required centring, shuttering complete. 1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 12.5 mm nominal size) crushed

Providing and Laying damp proof course 40 mm thick with cement conc. 1:1.5:3(1 cement:1.5 coarse sand:3 graded stone aggregate 12.5 mm nominal size) crushed

Extra for providing and mixing water proofing material in cement conc. Work in doses by weight of cement as per manufacturer’s specifications

Making plinth protection 50 mm thick of cement conc. conc. 1:3:6(1 cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated and grouted with fine sand incl. Finishing the top smooth.

Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of centring and shuttering-All work up to plinth level 1:1.5:3(1 cement;1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) crushed.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string, courses, fillets, columns, pillars, piers, abutments, posts and struts etc up to floor five level excluding cost of centring, shuttering , finishing and reinforcement 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size);

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landings balconies, shelves, chajjas, lintels, bands, plain window skills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size).

Centring and shuttering including strutting , propping etc and removal of forms for Foundations, footings, bases of columns etc. For mass concrete.

Centring and shuttering including strutting, propping etc and removal of forms for Suspended floors, roofs, landings, balconies and access platform.

Centring and shuttering including strutting, propping etc and removal of form for Lintels, Beams, plinth beams, girders, bressumers and cantilevers.

Centring and shuttering including strutting, propping etc and removal of form for Columns, pillars, piers, abutments, posts, and struts.

Centring and shuttering including strutting, propping etc and removal of form for Edges of slabs and breaks in floors under 20 cm wide

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Thermo mechanically treated bars.

Brick work with F.P.S bricks of class designation 75 in foundation and plinth in cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level

Half brick masonry with bricks of class designation 75 in foundations and plinth in cement mortar 1:4 (1 cement: 4 coarse sand)

Extra for brick masonry in superstructure above plinth level upto floor 5th level

Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 of IS: 1285 anodized transparent or dyed to required shade according to ISL 1868 (minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/ neoprene felt etc Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, CP Brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer Incharge ( including glazing panelling and fittings).

Providing and fixing anodized Aluminium grill of approved make conforming to IS 733 of IS: 1285 anodized transparent or dyed to required shade according to ISL 1868 (minimum anodic coating of grade AC 15), fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom Windows:

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resistant mortar beading and joints filled with acid and/or alkali resistant cement as per I.S:4457, complete as per directions of the Engineer-in-charge: i) In flooring over a bed of 10 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand).

ii) In dado/skirting on 12 mm thick mortar 1:4(1 acid proof cement: 4 coarse sand).

Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of 1:4(1 cement:4 coarse sand) 25mm thick

Kota stone slab 25mm thick in risers of steps, skirting, dado and pillars laid on 12mm (average) thick cement mortar 1:3 (cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to march the shade of the slab including rubbing and polishing complete.

Extra for nosing in steps and treads of Kota stone slab

Providing and fixing Ist quality ceramic glazed tiles conforming to IS 13753 of minimum thickness 5mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colour, shades except begundy, bottle green,black of any size as approved by Engineer incharge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand) and jointing with grey cement slurry # 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufactures) of Ist quality conforming of Is: 13755 of NITCO, ORIENT, SOMANY, KAJARIA Or equivalent make incolour such as White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of cement mortar 1:4(1 cement: 4 coarse sand) including pointing the joints with white cement and matching pigment etc complete

Painting top of roof with bitumen of approved quality at 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil, complete. With residual type petroleum of penetration 80/100

Providing 100 mm thick (av.) Mud phaska of damped brick earth on roof laid to slope, consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with flat tile bricks of class designation 100, grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral waterproofing compound by weight of cement and finishing neat.

Providing gola 75x75 mm in cement conc. 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 10 mm and down gauge) incl. Finishing with cement mortar 1:3 (1 cement:3 fine sand) as per standard design in 75x75 mm deep chase

Making khurras 45x45 cm with average thickness of 5 cm. cement conc. 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) over P.V.C. sheet 1m x 1m x 400 microns finished with 10 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised –Rigid PVC rain water pipes conforming to IS 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansion. Single socketed pipes (i) 75mm diameter

(ii) 110mm diameter

Providing and fixing on wall face un-plasticised PVC moulded fittings/ accessories for un-plasticised – Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion.: Coupler 110mm

Single tee with door 110x110x110mm

Bend 87.5*110mm bend

1 Shoe (Plain)00mm shoe

Providing and fixing unplasticised PVC Pipe clips of approved design to unplasticised PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with MS screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc complete. : 110mm

12mm cement plaster of mix 1:6(1 cement:6 fine sand)

15mm cement plaster of mix 1:6(1 cement:6 fine sand)

6mm cement plaster to ceiling of mix 1:3(1cmeent: 3 fine sand)

Distempering with first quality acrylic washable (ready made) of approved manufacture and of required shade/colour complete as per manufacturer’s specifications-two or more coats on new work

Finishing walls with water proofing cement paint of required shade New work (two or more coats applied @ 3.84 kg/10 sqm)

Providing and fixing water closet squatting pan (Indian type WC Pan) with 100mm sand cast iron P or S trap, 10 litre low level white PVC flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parry ware/Hind ware /Seabird/Orient (Coral)/ Hindustan/Cera with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. White vitreous China Orissa Pattern WC pan of size 580x440mm with internal type foot rests

Providing and fixing wash basin with CI/MS brackets 15mm C P Brass pillar taps, 32mm CP Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. Wash basin size 630x450mmwith a single 15mm CP Brass pillars taps

Providing and fixing PVC waste pipe for sink or wash basin including PVC wastefitting complete 32mm dia flexible pipe

Providing and fixing 100mm Stainless Steel grating for gully, floor or Nahani trap

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with CP brass screws and washers complete.

Providing and fixing PVC terminal guard 100 mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet and 100mm outlet

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, wide with a minimum distance of 37mm from wall face with concealed fittings arrangements of approved quality and colour weighing not less than 88 gm

Providing and fixing GI Pipes complete with GI fittings and clamps, including cutting and making good the walls.: 15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing ball valve (brass) of approved quality complete 20mm nominal bore

Providing and fixing un-plasticised PVC connection pipe with brass unions 15mm bore, 45 cm long

Providing and fixing CP brass shower rose with 15 mm inlet 150 mm dia.

Providing and fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore

Providing and fixing CP Stop cock (concealed) of standard design and of approved make conforming to IS: 8931 a)15mm nominal bore

Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved make conforming to IS 8931 a)15mm nominal bore

Providing and fixing C.P brass soap dish

Providing and placing on terrace polyethylene water storage tank ISI:12701 marked indicating the BIS Licence No. With cover and suitable locking arrangements and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank.

Providing, laying and jointing Glazed Stoneware Pipes grade A with stiff mixture of cement mortar in proportion of 1:1 (1 cement: 1 fine sand) incl. testing of joints etc. Complete and Laying in position cement concrete 1:5:10(1 cement:5 coarse sand:10 graded stone aggregate 40 mm nominal size) around pipes incl. Bed conc. As per standard design.-150 mm pipes- 150 mm dia.

Providing and Laying in position cement concrete 1:5:10(1 cement:5 coarse sand:10 graded stone aggregate 40 mm nominal size) around pipes incl. Bed conc. As per standard design.-150 mm pipes

Constructing brick masonry manhole in cement mortar 1:4(1 cement: 4 coarse sand) ) RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement: 4 fine sand: 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3(1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement and making channels in cement conc. 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 40mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 80x90 cm and 45 cm deep incl. C.I cover with frame (Light duty) 455x610mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of and weight of frame 15 kg) With FPS bricks with class designation 75 and with Crushed stone aggregate.

Making Soak Pit 2.50 m dia. 3.00 m deep with 45x45 cm dry honeycomb shaft with bricks of class designation 75 and SW drain pipe 100 mm dia. 1.80 m long complete as per standard design. With FPS bricks with

Providing and installing water lift pump 1HP incl. all accessories

Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc are required. In gratings, frames, guard bar, ladders, railings, brackets, grates and similar works

Providing and fixing gang saw cut mirror polished(pre moulded and pre polished), machine cut for kitchen platform, of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) and joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing , moulding and polishing to edge to give high gloss finish etc. complete at all levels

Providing and fixing Salem Stainless Steel A ISI 304(18/8) kitchen sink as per IS 13983 with CI Brackets, and Stainless Steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required. 600x460mm bowl depth 200 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Internal Electrification

Submission of Complete structural Design including plan elevation etc. Approved from Authorized Competent Authority.(Consultancy Charges)

ZAFFAR JAVAID

Bhat Electrical and Mechanical Works