SITC OF 8 METER MINIMAST LIGHT AT VARIOUS 9 LOCATIONS IN ARANMULA LAC

CIVIL WORKS

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns . etc for mass concrete

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo - Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) ) d reinforcement - All work up ed stone aggregate 20 mm nominal size derived frorn natural sources

Filling available excaxated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Supply and installation of Name Board of suitable size near the High Mast made of Granite comprising of all required details like Total Cost, Commencement, Completion and Inauguration Dates with all necessary civil works etc. complete as required

Supply and installation of Name Board of suitable size made of Acrylic/ACP Sheet on all 4 sides of the Mini Mast using already fabricated and duly painted existing MS Structural supports with Stainless Steel anchor fasteners, bolts, nuts, round and spring washers or screws etc. complete as required

ELECTRIFICATION WORKS

Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. l30mm bottom diameter thickness 3mm base plate dimensions of 200x200x l6mm suitable for windspeed as per IS 875 Part Ill fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters

Installation, testing and commissioning of 150W LED Flood Light with 3 Years Onsite Warranty having output greater than 105 lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled,Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 kV and Aluminium pressure diecast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 240V AC dupply. Driver compartment shall be separately accessible for maintenance (LM 79 and 80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

Supply and laying of XLPE insulated and PVC sheathed armoured Aluminium power cable of 1.1 kV grade of the following sizes in the existing excavated trenches, built up trenches and pulling through existing pipes including all minor civil works etc. complet as required. 2 Core 10 Sq.mm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages . colour washing etc. as required.2 Core 10 sq mm with factory made clamp

Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 10 sq. mm (19mm)

Supply and providing gland earthing using Gland Earthing Clips / Clamps for following size of PVC insulated and PVC sheathed / XLPE Aluminium conductor cable of 1.1 kV grade etc. complete as required 2 X 10 Sq.mm

Excavation of all types of soils for the laying of PVC insulated and PVC sheathed/XLPE Aluminium or Copper conductor cable, GI / DWC HDPE / RCC / PVC /Conduit Pipes, Earthing conductors to the required width and depth up to and including 1.2m and back filling etc. complete as required. (The trench dimensions and specifications shall conform to CPWD / PWD, Electrical Inspectorate and KSEBL Standards)

Earthing with ISI Marked Nickel Sealed Copper Bonded 20mm dia, 3.0m long Rod with T clamp having 250 microns coating thickness tested as per IEC 62561-2 and providing Masonry Enclosure with Concreate Slab Cover or Heavy Duty FRP Enclosure with Cover Plate having 5000kg load bearing capacity including suificient earthing compound etc. complete as required

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 4.06 mm GI conductor (8 SWG)

Supply and installation of 10 kg/cm2 PVC Pipes of the following sizes with all necessary accessories and laying in existing excavated trenches, built up trenches, clamping in built up trenches / walls / MS supports using Stainless Steel saddles and screws of which spacing between 30cm to 60cm including all minor civil works etc. complete as required Up to and including 40mm

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench 50/38 mm or nearest size

Supply, fabrication and installation of Outdoor Floor / Wall Mounting Cubical Type KSEBL Metering Panel / PVC Pipe / Cable supports / Name Board supports etc. using MS Angles, Flats, C Channels and Square Tubes of adequate size painted a two coats of epoxy primer and two coats of black / grey / other approved shade epoxy paint. The scope also the includes the supply and installation of necessaiy rectangular / square plates, anchor fasteners, bolts, nuts, round and spring washers or screws etc. complete as required

Preparation and submission of application for Single Phase Connection along with drawings, detailed load schedule etc. and co-ordination with KSEBL for energization etc. complete as required. (*All Statutory fees for getting connection shall also come within the scope of the Contractor)

EXCLUSIVE OF GST