Remaining work of Construction of Psq Cat B-16 (G+3) unit at Sukhsar Dist Dahod (Inc. Ele) [1st Attempt]

NAME OF WORK : Remaining work of PSQ Cat. B-16 (G+3) at sukhsar, Dist. Dahod (Incl. Elec.)

Statement showing the approximate quantities for the items of the above work to be carried out and

approximate cost put to tender for RS.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

1 Excavation for foundation in Dense or Hard soil upto 1.5mt depth including 183.00 Cum. 159.30 Rs. One Hundred Fifty Nine &

sorting out and stacking of useful materials and disposing of the excavated Paise Thirty Only

stuff upto Any Lead.

2 Filling avaliable excavated earth ( excluding rock). In trenches, plinth 7.00 Cum. 136.11 Rs. One Hundred Thirty Six &

sides of foundations etc. in layers NOt exceeding 20 cms. In depth Paise Eleven Only

consolidation each deposited layer by ramming and watering.

3 FILLING in plinth with SAND under floors including watering, raming 1.00 Cum. 415.66 Rs. Four Hundred Fifteen &

consolidating and dressing etc. complete. Paise Sixty Six Only

4 Providing & laying Cement Concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 5.50 Cum. 3617.44 Rs. Three Thousand Six

graded M\C stone aggrigates of 40 mm nominal size) curing complete Hundred Seventeen & Paise

excluding cost of formwork in FOUNDATION AND PLINTH. Forty Four Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

5 Providing & laying Cement Concrete 1:4:8 ( 1 cement : 4 coarse sand : 8 76.00 Cum. 2653.39 Rs. Two Thousand Six Hundred

graded M\C stone aggrigates of 40 mm nominal size) curing complete Fifty Three & Paise Thirty Nine

including cost of formwork in FOUNDATION AND PLINTH. Only

6 Providing & laying Cement Concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 0.50 Cum. 2492.22 Rs. Two Thousand Four

graded stone aggrigates of 40 mm nominal size) and curing complete Hundred Ninety Two & Paise

excluding cost of formwork in FOUNDATION AND PLINTH. Twenty Two Only

7 Providing and laying controlled cement concrete M - 200 and finishing 3.00 Cum. 5980.99 Rs. Five Thousand Nine

smooth with curing etc. complete Including the cost of form work of Hundred Eighty & Paise Ninety

Plywood only with fair finish & Proping must be of steel only so as to give a Nine Only

fair finish but excluding the cost of reinforcement for R.C.C. work in

coping for any cross sectional area. Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design.

8 Providing and laying controlled cement concrete M - 150 and finishing 2.00 Cum. 3875.02 Rs. Three Thousand Eight

smooth with curing etc. complete excluding the cost of form work and Hundred Seventy Five & Paise

reinforcement for R.C.C. work in foundation and plinth. Rate are also Two Only

inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

9 Providing and laying controlled cement concrete M - 200 and finishing 2.70 Cum. 7627.60 Rs. Seven Thousand Six

smooth with curing etc. complete Including the cost of form work of Hundred Twenty Seven & Paise

Plywood only with fair finish & Proping must be of steel only so as to give a Sixty Only

fair finish but excluding the cost of reinforcement for R.C.C. work in SLAB

having thickness of 13 cm and upto 15 cm thickness for GROUND floor.

Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

10 Providing TMT, Fe-500/500D bar reinforcement of RCC Work including 540.00 Kgs 76.52 Rs. Seventy Six & Paise Fifty

cutting, bending, binding and placing in position etc.complete for all Two Only

floor.( Brand as approved by GSPHC)

11 BRICK WORK using common burnt clay building bricks having crushing 7.00 Cum. 4100.65 Rs. Four Thousand One

strength not less than 35 Kg./Sq cm. In super structure above plinth level Hundred & Paise Sixty Five

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 cement Only

: 6 coarse sand) for GROUND FLOOR.

12 BRICK WORK using common burnt clay building bricks having crushing 2.00 Cum. 4138.78 Rs. Four Thousand One

strength not less than 35 Kg./Sq cm. In super structure above plinth level Hundred Thirty Eight & Paise

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 cement Seventy Eight Only

: 6 coarse sand) for 1st FLOOR.

13 BRICK WORK using common burnt clay building bricks having crushing 3.00 Cum. 4176.91 Rs. Four Thousand One

strength not less than 35 Kg./Sq cm. In super structure above plinth level Hundred Seventy Six & Paise

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 cement Ninety One Only

: 6 coarse sand) for 2nd FLOOR.

14 BRICK WORK using common burnt clay building bricks having crushing 4.00 Cum. 4215.04 Rs. Four Thousand Two

strength not less than 35 Kg./Sq cm. In super structure above plinth level Hundred Fifteen & Paise Four

upto floor two level. Conventional bricks in cement moratar 1 : 6 ( 1 cement Only

: 6 coarse sand) for 3rd FLOOR.

15 Providing 10 mm thick Cement PLASTER in Single Coat on Ceilings for 18.00 Sqm 226.90 Rs. Two Hundred Twenty Six &

Interior Plastering and Finished Even & Smooth in C.M. 1: 3 ( 1 cement : 3 Paise Ninety Only

sand ) Including Finishing with a Floating Coat of Cement and Fine Sand

Mortar of Proportion 1:1 (1.5mm thick About) at GROUND FLOOR.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

16 Provinding 15 mm thick Cement PLASTER in Single Coat on Brick or 183.00 Sqm 229.09 Rs. Two Hundred Twenty Nine

Concrete Wall for Interior Plastering and Finished Even and Smooth in & Paise Nine Only

C.M. 1:4 ( 1 cement : 4 sand ) Including Finishing with a Floating Coat of

Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at

17 Provinding 20 mm thick SAND FACED cement PLASTER on walls above 153.00 Sqm 350.48 Rs. Three Hundred Fifty &

ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 Paise Forty Eight Only

sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc.

Complete for any height.

18 providing 8 mm thick sand face plaster in CM(1:1)(1 cement:1 41.00 Sqm 143.81 Rs. One Hundred Forty Three

sand)finishing coat over existing 12 mm thick backing coat on walls above & Paise Eighty One Only

ground level etc.complete for any height.

19 Provinding 10 mm thick cement PLASTER in single coat of interior 94.00 Sqm 266.59 Rs. Two Hundred Sixty Six &

plastering and finished even and smooth in cement mortar 1:3 ( 1 cement Paise Fifty Nine Only

: 3 sand ) and finishing with floating coat of neat cement slurry including

providing and mixing with WATER PROFFING material For ALL

20 Providing & laying acrylic base ( zycosil or equivalent ) Water proofing 24.00 Sqm 110.70 Rs. One Hundred Ten & Paise

paint treatment in two coats to vertical and horizontal surface of depressed Seventy Only

prortion of Bath / WC as directed by Engineer in charge.This treatment

shall be carried out over and above water proofing cement plaster.

21 Provinding CEMENT VATA (10cm x 10cm) size quarter round in cement 108.00 Rmt 24.04 Rs. Twenty Four & Paise Four

mortar (1 : 1) including neat cement finishing, watering etc. Complete. Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

22 Providing & laying ordinary CEMENT CONCRETE 1:2:4 ( 1 cement : 2 48.00 Sqm 352.17 Rs. Three Hundred Fifty Two &

coarse sand : 4 graded machine broken stone aggregate 10 mm nominal Paise Seventeen Only

size ) for flooring Laid in one layer finished with floating coat of neat cement

(A) 50 mm Thick for All floors

23 Finishing wall with weather proof exterior emulsion paint on wall surface 825.00 Sqm 155.21 Rs. One Hundred Fifty Five &

(two coats) over and above applying One Coat Of Primer to give an Paise Twenty One Only

required shape even shade after thoroughly brushing the surface to remove

all dirt, and remains of loose powdered materials.etc complete.

primer,Exterior Emulsion Paint Shall be used as per approved material list

by GSPHCL. (For any Height)

24 Finishing wall with weather proof exterior emulsion paint on wall surface 1600.00 Sqm 136.40 Rs. One Hundred Thirty Six &

(two coats) over One Coat Of Primer to give an required shape even shade Paise Forty Only

Exterior Emulsion Paint Shall be used as per approved material list by

GSPHCL. (For All Floor)

25 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on 262.00 Sqm 192.51 Rs. One Hundred Ninety Two &

Ceilling/Slop Surface (two coats) to give an required shap even shade after Paise Fifty One Only

throughly brushing the surface to remove all dirt and remains of loose

poweder material etc. complete. Rate are inclusive of applying two coat of

lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to give

and even shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth. Fine Putty,

primer, plastic Emulsion Paint Shall be used as per approved material list

by GSPHCL. (For All Floor)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

26 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on 1280.00 Sqm 171.53 Rs. One Hundred Seventy One

Ceilling/Slop Surface (two coats) to give an required shap even shade after & Paise Fifty Three Only

throughly brushing the surface to remove all dirt and remains of loose

poweder material etc. complete. Rate are inclusive of applying one coat of

lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to give

and even shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered smooth. Fine Putty,

primer, plastic Emulsion Paint Shall be used as per approved material list

by GSPHCL. (For All Floor)

27 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to 474.00 Sqm 181.57 Rs. One Hundred Eighty One &

give an required shap even shade after throughly brushing the surface to Paise Fifty Seven Only

remove all dirt and remains of loose poweder material etc. complete. Rate

are inclusive of applying two coat of lapy (Putty) and one coat of primer on

new wall surface to give and even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth. Fine Putty, primer, plastic Emulsion Paint Shall be used as

per approved material list by GSPHCL. (For All Floor)

28 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to 3680.00 Sqm 160.89 Rs. One Hundred Sixty & Paise

give an required shap even shade after throughly brushing the surface to Eighty Nine Only

remove all dirt and remains of loose poweder material etc. complete. Rate

are inclusive of applying one coat of lapy (Putty) and one coat of primer

on new wall surface to give and even shade including thoroughly brushing

the surface free from mortar dropping and other foreign matter and sand

papered smooth. Fine Putty, primer, plastic Emulsion Paint Shall be used as

per approved material list by GSPHCL. (For All Floor)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

29 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door 173.00 Sqm 4183.38 Rs. Four Thousand One

Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Hundred Eighty Three & Paise

Construction of Flush Door is with Pine or southern Yellow Pine Filler and Thirty Eight Only

2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with

Lock rail on Center. Flush Door Provide with Teak wood beading patti

(32mm X 12mm) on Peripheries of Flush Door Including Paint Matching with

Laminates. Frame & Flush door shutter having 5 year warranty against

attack of biological agent like termite, borers, decay, fungi and harmful

insects also warranty against seasoning related issues like crack, bending,

twisting, warping. Laminates on shutter shall be press by cold press

method. Shutter shall be brought to site in packed PVC bags & pvc coating

shall be removed on completion of work in such a way that shutter & Frame

is free from nail mark & any damages etc. Rates are also Inclusive of all

Labors & Proviging 4 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm

thick, required Screw & Nails per Frame and Fixing following S.S. Fixtures

30 Providing and Fixing Door Eye Glass Ultra Clear 180 degree finish with 16.00 Nos. 248.31 Rs. Two Hundred Forty Eight &

brass as per detail drawing and as directed by Engineer In Charge. Rate Paise Thirty One Only

are inclusive of all material, labour, texes.

31 Providing & Fixing Teak Wood Door Frame Patti 40mm x 10 mm thick as 440.00 Rmt 71.01 Rs. Seventy One & Paise One

per detail drawing and as directed by Engineer In charge.Rate are Only

inclusive of all material , Labour, Taxes.

32 Providing & Fixing WPC Door Patti 26 mm x 6 mm thick as per detail 170.00 Rmt 57.02 Rs. Fifty Seven & Paise Two

drawing and as directed by Engineer In charge. Rate are inclusive of all Only

material , Labour, Taxes.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

33 Providing and fixing 24 mm thick THREE LAYER RIGID PVC PLAIN 58.00 Sqm 3272.78 Rs. Three Thousand Two

DOOR shutter made from co-extruded three- layer rigid PVC foam sheet Hundred Seventy Two & Paise

(single Extruded) with density not less than 600 kg/cbm outer layer 1 mm Seventy Eight Only

thick should be of rigid PVC with density of not less than 1400 kg/cbm

manufactured by an ISO 9001-2015 certified company. Complete as per

direction of Engineer-in-charge, manufacturer’s specification & drawing.

34 Providing and fixing standard extruded of alluminium section of size 63 * 12.00 Sqm 1163.92 Rs. One Thousand One

38.10 * 1.2 mm ( Jindal section NO:2434,@Wt 0.643 Kg/RMT )with colour Hundred Sixty Three & Paise

anodized alluminium frame for ventilation with 5 mm thick frosted glass as Ninety Two Only

details etc complete for ventilation.

35 Providing and fixing Alluminium section window having extruded 52.00 Sqm 1902.50 Rs. One Thousand Nine

Aluminum Colour anodized section frame main outer size 95mm x 24mm x Hundred Two & Paise Fifty

1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three Only

track member size 92mm x 31.75mm x 1.30mm (of Jindal Section

no:8688,@ Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x

1.50mm (of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters

of horizontal member size 40 mmx18mm x1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm x

mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details including one mosquitoe jali shutter With Both Side Locking

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

36 Providing and fixing extruded Alluminium Section Windows having 139.00 Sqm 2436.01 Rs. Two Thousand Four

extruded aluminum Colour anodized section frame main outer size 127mm Hundred Thirty Six & Paise

x 38.10mm x 1.35mm (of Jindal Section no:2443,@ Wt.1.384 One Only

Kg/mt),horizontal Four track member size 122.20mm x 31.75mm x

1.10mm (of Jindal Section no:8787,@ Wt. 1.205 Kg/mt), Vertical member of

size 122.20mm x 31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt.

Kg/mt) with sliding shutters of horizontal member size 40mm x 18mm x

1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical member of

size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of

0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass fixing to frame as per details

etc complete for window including Two Nos of Mosquitoe Jali Shutter of

Size 1750mm X 850mm with Locking Arrangment.

37 Constructing of cooking platform ( sandwich type ) 68cm width and 84cm 61.00 Rmt 3757.28 Rs. Three Thousand Seven

high resting on sandwiched polish Granite Slab in C.M 1:3. With providing Hundred Fifty Seven & Paise

and fixing 25 mm thick single side polished kota stone at bottom(Polish side Twenty Eight Only

shall be laid at bottom and rough side shall be at top) and 18 to 20mm thick

Polish Granite stone ( single piece / telephonic Black or color as directed)

on top. Vertical polished granite stone (single piece) shall be fixed at the

end of platform as per drawing. Half rounded moulded facia patti of 25mm

width shall be fixed at the front edge on top of platform as per drawing.

With necessary cutting of stones for fixing of Sink & making hole for gas

line, providing & fixing PVC bend of 25mm dia. as directed. The numbers

of vertical support/ partition either single or sandwich type of polished kota

stone (Polished on exposed sides) shall be provided as per detailed

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

38 Providing and fixing stainless steel ( 304 Grade ) 1mm thick Matt / Satin 16.00 Nos. 4269.00 Rs. Four Thousand Two

Finish Kitchen sink of over all Minimum size 533mmx 457mm X 203mm Hundred Sixty Nine Only

deep having bowl Minimum size 470mm x 395mm x 203mm with cement

mortar 1:3 etc.complete.Rate including of 32mm dia.C.P.brass waste

coupling and 32mm dia.rigid PVC waste pipe upto N.T.S.S.Kitchen Sink

Shall be of Nirali, Navkar, Carysil, Krishna make Only

39 Providing and Fixing Granite Telephonic Black Colour 18 mm thick for 10.00 Sqm 2427.83 Rs. Two Thousand Four

jambs and sills of doors & windows using neat cement slurry laid over 20 Hundred Twenty Seven & Paise

mm average base of cement mortar 1:1(1 cement:1 Coarse Sand) and Eighty Three Only

jointed with grey cement slurry including racking(Tancha Work) rubbing

and polishing,scaffoldings,tools and tackles,scaffolding etc. complete(with

base of neat cement) as per direction of Engineer in charge including full

rounding the exposed edges as directed.

40 Providing and laying 25mm thick Double Pre Polished (Dimond 183.00 Sqm 1108.30 Rs. One Thousand One

Polished) Kota Stone Flooring over average 20mm thick base of cement Hundred Eight & Paise Thirty

mortar 1:6 (1 Cement : 6 Coarse sand) and jointed with gray cement slurry Only

including rubbing and polishing etc. complete. All kotah stone edges shall

be hand cut, Machine cut shall not be allowed.

41 Providing and Laying 25mm thick Mirror Polished (Dimond Cut) Kota 37.00 Sqm 1292.70 Rs. One Thousand Two

Stone in risers of steps,skirting Dedo and pillars laid on 10mm thick Hundred Ninety Two & Paise

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement Seventy Only

slury mixed with pigment to match the shade of slab including rubbing and

polishing etc. complete as Directed By Engineer In Charge for all Floors.

42 MOULDING OF KOTA STONE/GRANITE STAIR TRADE COMPLETE AS PER 358.00 Rmt 129.95 Rs. One Hundred Twenty Nine

DIRECTION OF ENGINEER IN CHARGE. & Paise Ninety Five Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

43 PRO. 3 NOS GROOVE IN TOTAL LENGTH OF STAIRCASE TREAD OF SIZE 185.00 Rmt 82.80 Rs. Eighty Two & Paise Eighty

10MM*10MM FINISHED SMOOTH IN PARALLEL LINE , EQUALLY SPACED Only

AS PER DIRECTION OF ENGINEER IN-CHARGE IN ALL TYPE OF FLOORING

, ETC. COMPLETE.

44 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick 344.00 Sqm 1682.60 Rs. One Thousand Six Hundred

tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 Eighty Two & Paise Sixty Only

coarse sand) on new surface or fixing on existing flooring by adhesive

including dismentaling of existing flooring and material jointed with color

cement slurry including finished with flush pointing & cleaning the surface

etc. complete. Size & Shade of tiles shall be as per Approved Architecture

drawing & as per direction of Engineer in charge.

45 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick 42.00 Sqm 1445.20 Rs. One Thousand Four

tile for skirting,risers of steps and dedo over10 mm (average) base of Hundred Forty Five & Paise

cement mortar 1:3 ( 1 cement: 3 coarse sand) on new surface orfixing on Twenty Only

existing flooring by adhesive including dismentaling of existing flooring

and material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete. Size & Shade of tiles shall be

as per Approved Architecture drawing & as per direction of Engineer in

46 Providing & Laying 24" x 24" Antiskid Vitrified 8 mm thick tile flooring 23.00 Sqm 1458.33 Rs. One Thousand Four

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) Hundred Fifty Eight & Paise

on new surface or fixing on existing flooring by adhesive including Thirty Three Only

dismentaling of existing flooring and material jointed with color cement

slurry including finished with flush pointing & cleaning the surface etc.

complete. Size & Shade of tiles shall be as per Approved Architecture

drawing & as per direction of Engineer in charge.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

47 Provinding & laying Printed / Coloured Glazed 8mm thick TILES in 429.00 Sqm 1508.58 Rs. One Thousand Five

skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 ( 1 Hundred Eight & Paise Fifty

cement : 3 coarse sand ) & jointed with white cement slurry. ( Size of Tiles Eight Only

shall be 600 mm x 300mm ). Size & Shade of tiles shall be as per Approved

Architecture drawing & as per direction of Engineer in charge.

48 Providing and fixing both side polished machine cut KOTA STONE 68.00 Sqm 589.50 Rs. Five Hundred Eighty Nine

shelve/ partition 20mm to 25mm thick embaded in to wall at support & Paise Fifty Only

including racking and finishing smooth the surface including cutting the

stone as and where required etc. complete including rounding of exposed

edges etc. complete.

49 Providing and fixing Telephonic Black Colour Granite shelve/ partition 5.00 Sqm 3322.50 Rs. Three Thousand Three

18 mm thick embaded in to wall at support including racking and finishing Hundred Twenty Two & Paise

smooth the surface including cutting the stone as and where required etc. Fifty Only

complete including rounding of exposed edges etc. complete.

50 Providing and Fixing of stainless steel 304 grade pipe (hand rail) railing. 97.00 Rmt 911.03 Rs. Nine Hundred Eleven &

top pipe of 2" dia , vertical support 1.0 " x1.0" at every max. 0.9 mt c/c, Paise Three Only

fixed with stone/concrete or brickwork &finishing the said as directed by

engineer in charge. Rate are inclusive of all

material,labour,taxes&polishing.

51 Providing and fixing concealed or open center point to wall ceiling & floor 218.00 Rmt 449.39 Rs. Four Hundred Forty Nine &

CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for Paise Thirty Nine Only

potable water of following dia. nominal bore tube fittingswith Z patti

(Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for

Vertical water supply pipe. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of GSPHCL make

list . 40mm Dia

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

52 Providing & fixing Concealed Center Point to wall celing & floor CPVC 24.00 Rmt 251.31 Rs. Two Hundred Fifty One &

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Paise Thirty One Only

Portable Water of 25 mm. dia. nominal bor tube fitting and clamps

including making good the wall, ceiling and floor etc. Complete.

53 Providing & fixing Concealed Center Point to wall celing & floor CPVC 24.00 Rmt 206.73 Rs. Two Hundred Six & Paise

(SDR-13.5) PIPE having National Sanitation Foundation (NSF) seal For Seventy Three Only

Portable Water of 20 mm. dia. nominal bor tube fitting and clamps

including making good the wall, ceiling and floor etc. Complete.

54 Provinding and fixing gun metal check or non return full way WHEEL / 12.00 Nos. 656.86 Rs. Six Hundred Fifty Six &

HANDLE VALVE 40 mm dia.(Zoloto make only). Paise Eighty Six Only

55 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are inclusive 32.00 Nos. 1309.39 Rs. One Thousand Three

of all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Hundred Nine & Paise Thirty

Drawings, Specifications and as per the Instruction of Engineer In charge. Nine Only

Materials used for the above items Must be list approved by

G.S.P.H.C.L.15mm Dia.

56 Providing & Fixing Angle Cock with Wall Flange. Rate are inclusive of all 64.00 Nos. 665.51 Rs. Six Hundred Sixty Five &

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Paise Fifty One Only

Drawings, Specifications and as per the Instruction of Engineer In charge.

The model & make of Angle cock shall be as per approved make list of

57 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Sout & 16.00 Nos. 1330.32 Rs. One Thousand Three

Wall Flange. Rate are inclusive of all matreials, Labour & Necessary Fittings Hundred Thirty & Paise Thirty

etc. Complet as per Detailed Drawings, Specifications and as per the Two Only

Instruction of Engineer In charge. The model & make of Angle cock shall be

as per approved make list of G.S.P.H.C.L.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

58 Providing & fixing in position ISI marked Rotational moulded Polyethylene 8000.00 Ltr. 3.91 Rs. Three & Paise Ninety One

double layer cylindrical vertical storage Tank (IS : 12701) water tank size Only

inlcuding making inlet and outlet. Over flow and washout arrangement with

G.I. connection inlcuding using necessary M.H. for connection etc.

complete with closed cover including applying two coats of oil painting

outside the tank etc.complete.

59 P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 142.00 Rmt 323.15 Rs. Three Hundred Twenty

90mm Dia Complete with Special flings, Compressor type Fittings, Pipe Three & Paise Fifteen Only

fixing with Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with

washer for Vertical Rain water pipe, Including making good the ceiling and

floor on terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe

and vertical pipe and 90mm bend at the end near by Ground level rate are

Inclusive of all Necessary Fittings required.

60 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste 8.00 Rmt 264.97 Rs. Two Hundred Sixty Four &

pipe with "O" ring of ISI13592/92-2013 (Reaffirmed 2018) or its relevant & Paise Ninety Seven Only

latest edition &, Pipe fixing with Z patti (Minimum 1.6mm thick) with

6mm Dia U Clamp with washer for Vertical Drain pipe, etc.complete and

making good the wall ceiling and floor. (A) 75mm dia

61 Providing and fixing to wall, ceiling and floor U.PVC SWR soil waste pipe 8.00 Rmt 495.91 Rs. Four Hundred Ninety Five

with ' O ' Ring 110 mm dia. of ISI13592/92-2013 (Reaffirmed 2018) or its & Paise Ninety One Only

relevant & latest edition & Pipe fixing with Z patti (Minimum 1.6mm

thick) with 6mm Dia U Clamp with washer for Vertical Drain pipe,

etc.complete and making good the wall ceiling and floor. (B) 110mm dia

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

62 Providing and laying G.I.RAIN WATER SPOUT of 50 mm dia and 0.30 m 5.00 Nos. 100.90 Rs. One Hundred & Paise

length. Ninety Only

63 Providing & Fixing SWR/UPVC Multi Nahni Trap(IS14735) of following 4.00 Nos. 508.29 Rs. Five Hundred Eight & Paise

Nominal Dia. Self Cleaning design with top tiles and making good the walls Twenty Nine Only

and floors 100mm inlet and 50mm outlet including 150 X 150 mm stainless

steel with grating.

64 Provinding and fixing in position SWR/UPVC COWEL VENT to pipe 75 4.00 Nos. 16.47 Rs. Sixteen & Paise Forty Seven

mm dia directed. Only

65 Provinding and fixing in position SWR/UPVC COWEL VENT to pipe 110 4.00 Nos. 28.16 Rs. Twenty Eight & Paise

mm dia directed. Sixteen Only

66 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & 32.00 Nos. 5470.90 Rs. Five Thousand Four

intergal "P" or "S" Trap including Jointing the Trap with Pan and Soil pipe. Hundred Seventy & Paise

Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm dia, Ninety Only

165mm length using Plastic sleeve Make by Using Drill Bitt Only. Rate are

inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per

Detailed Drawings, Specifications and as per the Instruction of Engineer In

charge. Materials used for the above items Must be list approved by

67 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all 32.00 Nos. 565.51 Rs. Five Hundred Sixty Five &

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Paise Fifty One Only

Drawings, Specifications and as per the Instruction of Engineer In charge.

Materials used for the above items Must be list approved by G.S.P.H.C.L.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

68 Providing & Fixing Single Hole Wash Basin with C.I or M.S. brackete & M. 48.00 Nos. 3935.33 Rs. Three Thousand Nine

I . fisher union, P.V.C water pipe with Connection from Stop Cock to Pillar Hundred Thirty Five & Paise

Tap, 32mm dia. C.P. brassa waste coupling with Connection 32mm dia Thirty Three Only

waste Pipe up to N.T etc. Complete. Rate are inclusive of all matreials,

Labour & Necessary Fittings etc. Complet as per Detailed Drawings,

Specifications and as per the Instruction of Engineer In charge. Materials

used for the above items Must be list approved by G.S.P.H.C.L. Rate also

inclusive of pvc bottle trap of Approved make by GSPHCL

69 providing and fixing PVC bottle trap model no.ALD-701017 POLYMER 16.00 Nos. 948.75 Rs. Nine Hundred Forty Eight

MAKE WATERTEC ,with necessary coupling of approved quality for wash & Paise Seventy Five Only

70 Provinding and fixing 600mm x 450mm bevelled edge MIRROR of 48.00 Nos. 850.90 Rs. Eight Hundred Fifty & Paise

superior glass mounted on 6mm thick A.C. sheet or plywood sheet fixed to Ninety Only

wooden plugs with C.P. brass screws & washers.

71 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, Labour & 32.00 Nos. 1078.70 Rs. One Thousand Seventy

Necessary Fittings etc. Complet as per Detailed Drawings, Specifications Eight & Paise Seventy Only

and as per the Instruction of Engineer In charge. Materials used for the

above items Must be list approved by G.S.P.H.C.L.

72 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & 48.00 Nos. 909.08 Rs. Nine Hundred Nine & Paise

Necessary Fittings etc. Complet as per Detailed Drawings, Specifications Eight Only

and as per the Instruction of Engineer In charge. Materials used for the

above items Must be list approved by G.S.P.H.C.L.

73 Providing a I.S.I. mark 7 levers three key brass pad lock of NAVATAL 18.00 Nos. 243.64 Rs. Two Hundred Forty Three

(Godrej) make 65mm dia on completion of project. & Paise Sixty Four Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

74 Provinding and laying inegrated cement based proofing treatment of 565.00 Sqm 920.61 Rs. Nine Hundred Twenty &

required thickness over the roof including 10mm thick waterproofing Paise Sixty One Only

cement plaster in cement plaster in cement mortar1:3 and chaina mosaic

fitting and finally finishing the surfase with white cement slurry and

slopping out taerrace slabs with following specification laid to required

slope not flatter than 1:80 ( the thickness of water proofing treatment near

rainwater outlet or the lowest point of the finishedslope shall not be less

then 45mm, including treating the vertical surfaseof the parapet wall up to

20cms . height above finished level of terracing including finishing the top

with joint less water proofing plaster , curing , testing etc. complete. Rate is

including ten years performance of guarantee bond to be given on stamp

paper. (No extra shall be paid for increase in thickness for proper slope).

(A) Applying and grouting a slurry coat of neat cemnt using 2.75 kg/sqm. of

cement admixed with properly water proofing compound conforming to IS -

2645 and 10 mm thick water proofing cement plaster in Cement mortar 1:3

over the R.C.C.slab incl. cleaning the surface before treatment.

(B) Layign cement corcretre using broken brick bats 25mm to 40mm size

with 50% of cement mortar 1:4 (1cement :4 coarse sand ) over 10mm thick

water proofing cement plaster in cement mortar 1:3 (1 cement ,3 coarse

sand) admixed with proprietary water proofing compound conforming to IS

2645 to required slope and treating similarly the adjoining walls up to

200mm height incl. rouding of junction of walls.

(C) After Two Days of proper curing applying a second floor of cement

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

(D) Finishing the surface with china mosaic pieces laid on 10mm thick joint

less cement plaster of mix 1:3(1 cement :3 coarse sand )admixed with

proprietary water proofing compound conforming to IS :2645 and finally

finishing the surface with trowel with neat cement slurry.

(E) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curring for final taste .

All above operation to be done in order and as directed and specified by

the Engineer In Charge.

75 Constructing brick masonry chamber for under ground C.I. inspection 32.00 Nos. 3793.18 Rs. Three Thousand Seven

chamber and bends with brick having crushing strength not less than 35 Hundred Ninety Three & Paise

kg./cm2 in C.M. 1.5 precast R.C.C. cover 1:1.5:3 of size 455 x 610 mm Eighteen Only

internal dimenslons. R.C.C. top slab with C.C. 1:1.5:3 mix (1 Cement :

coarse sand :3 graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cment walls & bed connect etc. complete rate

inclusive of outside plaster of 15mm thick in cm 1:3 form top of chamber

and all side up to 15 cm deep below ground level. rate also inclusive of

providing and fixing precast cover of size .455m x 0.61 x .07 m with 2 no of

m.s. flat handle in cement concrete 1:1.5:3. including angle frame of section

40x40x5mm section etc complete.(i) Inside Diamensions 455mm x

610mm and 450mm deep for single/ Multiple pipe line.

76 Extra over above Item for additional depth 0.1 mt. or part thereof beyond 71.00 Nos. 239.99 Rs. Two Hundred Thirty Nine &

450mm depth for brick masonary chamber for 455mm x610mm size. Paise Ninety Nine Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

77 Constructing brick masonry chamber for under ground C.I. inspection 7.00 Nos. 5476.93 Rs. Five Thousand Four

chamber and bends with brick having crushing strength not less than 35 Hundred Seventy Six & Paise

kg./cm2 in C.M. 1.5 precast R.C.C. cover 1:1.5:3 of size 600 x 850 mm Ninety Three Only

internal dimenslons. R.C.C. top slab with C.C. 1:1.5:3 mix (1 Cement :

coarse sand :3 graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cment walls & bed connect etc. complete rate

inclusive of outside plaster of 15mm thick in cm 1:3 form top of chamber

and all side up to 15 cm deep below ground level. rate also inclusive of

providing and fixing precast cover of size 0.7 m x 0.6 x .07 m with 2 no of

m.s. flat handle in cement concrete 1:1.5:3. including angle frame of section

40x40x3mm section etc complete.(i) Inside Diamensions 600mm x

850mm and 450mm deep for single/ Multiple pipe line.

78 Extra over above Item for additional depth 0.1 mt. or part thereof beyond 20.00 Nos. 322.37 Rs. Three Hundred Twenty

450mm depth for brick masonary chamber for 600mm x850mm size. Two & Paise Thirty Seven Only

79 Provinding and fixing SW gully trap with out CI grating brick masonary 12.00 Nos. 1176.94 Rs. One Thousand One

chamber and with water tight Pre cast RCC cover with frame of 300*300mm Hundred Seventy Six & Paise

size inside with standard weight (I) Square mouth traps ©150*100mm Ninety Four Only

size P or R type.

80 Providing, Fabricating and fixing M.S. GRILL/GATE of approved pattern 7690.00 Kgs 75.41 Rs. Seventy Five & Paise Forty

fabricated from M.S. flat, square bars, round bars, c-channel, Square/round One Only

box pipe as per detail Drawings. Rate is inclusive of welding with grinding

smooth wirh two coats of Oil paint and one coat of yellow Zinc chromate

primer coat of approved brand only. Oil paint shall be used as per

approved material list of GSPHCL. Steel must be of ISI mark only.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

81 Providing and fixing MS Letter Box of size of 330x280x75 mm made from 16.00 Nos. 612.95 Rs. Six Hundred Twelve &

24 guage MS sheet with high quality textured Red & Ivory painted as per Paise Ninety Five Only

instruction of engineer in charges.

82 Providing & Fixing 3mm thick acrylic sheet with vinyl letter colour-2073- 1.00 Sqm 7193.88 Rs. Seven Thousand One

dark grey for back ground and colour -2190-white letter with required Hundred Ninety Three & Paise

screws etc as per required sizes complete etc as per specification & Eighty Eight Only

instruction of engineer in charge..

83 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are 96.00 Nos. 990.61 Rs. Nine Hundred Ninety &

inclusive of all matreials, Labour & Necessary Fittings etc. Complet as per Paise Sixty One Only

Detailed Drawings, Specifications and as per the Instruction of Engineer In

charge. Materials used for the above items Must be list approved by

84 SS Railing Providing and fixing of stainless steel 304 grade pipe railing 49.00 Rmt 3507.90 Rs. Three Thousand Five

1.05 mt. height or as specified in detail drawing or as directed. Top round Hundred Seven & Paise Ninety

pipe (Baluster) shall be of 2" dia. Vertical balustar 1.5" x 1.5" at every Only

maximum 0.90m c/c or as specified in detail drawing or as directed and

intermediate 3 nos. runners pipe mid rail of 1" dia. and S.S. katori shall be

minimum 50mm x 50mm. All S. S. Pipe and S. S. katori must be 16 gauge.

The railing system shall be floor mounted with anchor fastener completed

as per detailed drawing & as directed by engineer in charge. Rate are

inclusive of all material, labour, taxes & polishing.all materials shall be of

approved make list of GSPHCL only.

85 Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, 32.00 Nos. 931.79 Rs. Nine Hundred Thirty One &

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Paise Seventy Nine Only

Specifications and as per the Instruction of Engineer In charge. Materials

used for the above items Must be list approved by G.S.P.H.C.L.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

86 Providing and Fixing S.S. Cloth Hanger (5 Hook) as per detail drawing and 64.00 Nos. 249.85 Rs. Two Hundred Forty Nine &

as directed by Engineer In Charge. Rate are inclusive of all material, Paise Eighty Five Only

labour, texes. Samrat Brand as Approved.

87 providing and fixing 9 nos. curtain 3" M-hook (stainless steel)at drawing 16.00 Nos. 175.78 Rs. One Hundred Seventy Five

room balcony with all labour and material and fitting etc completed as per & Paise Seventy Eight Only

direction of engineer in charge (for one unit)

88 Providing and laying Plantations including providing and fixing tree 44.00 Nos. 600.00 Rs. Six Hundred Only

guard.. Rates are also inclusive of maintaining the plants in live condition at

the time of the execution of the building. i.e. Initial starting time. [The tree

shall be planted].

89 Providing & laying lawn (Green grass ) for land Scapping including 600.00 Sqm 150.00 Rs. One Hundred Fifty Only

watering & all labours.

90 Providing and fixing Pre-Cast Rubber Dye/steel Dye inter locking 684.00 Sqm 695.07 Rs. Six Hundred Ninety Five &

concrete block 60mm thick with grade of concrete M300 pnumatic Paise Seven Only

compressed/vibrated mechanically and as per approved design

confirming to IS 15658:2006 including 35mm Sand layer for levelling and

filling the joint with sand in proper line and level as per guidlines of IRC :

SP 63-2018 etc complete.

91 Providing and fixing Pre-Cast Concrete Kerb stone of gray cement based 255.00 Rmt 371.21 Rs. Three Hundred Seventy

concrete block 30cm length,30cm height and 15cm thick of M250 grade One & Paise Twenty One Only

concret as per approved design and including excavation for fixing in

proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

92 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class 175.00 Rmt 396.00 Rs. Three Hundred Ninety Six

SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline Only

coupler and elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to the departmental

stores etc. complete. (150mm ID Dia) Including Lowering, laying and

jointing of class SN 8 structured wall ( External Annular Corrugated &

Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the trench, laying on

the lower bedding (constructed at bottom of trenches) at prescribed

gradient,depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc. complete as

per drawing,specifications & detailed engineering, including carriage of

pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

93 Providing, supplying and Fixing Corrugated DWC HDPE Pipes of Class 164.00 Rmt 229.00 Rs. Two Hundred Twenty Nine

SN8 Structured Wall polyethelene Piping systems (Pipe with online/offline Only

coupler and elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per EN:13476-3

including all local and central taxes, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to the departmental

stores etc. complete. (100mm ID Dia) Including Lowering, laying and

jointing of class SN 8 structured wall ( External Annular Corrugated &

Smooth Internal surface) Polyethylene Piping and fittings with the help of

coupler ( on line / off line ) attached with one end of pipes, sliding over the

elastomeric sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the trench, laying on

the lower bedding (constructed at bottom of trenches) at prescribed

gradient,depth & alignment ,testing the water tightness of the joints,

ensuring the continuity tests of specified pipe segments etc. complete as

per drawing,specifications & detailed engineering, including carriage of

pipes & fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge.

94 Provinding and fixing Precast R.C.C cover including angle freme of 4.00 Nos. 1932.00 Rs. One Thousand Nine

40mmx 40mmx3mm section and C.C 1:1.5:3 precast R.C.C cover for I.C and Hundred Thirty Two Only

M.H chamber etc. including 8mm HYSD steel at 15mm c/c both way and oil

painting of angle frame and finishing of concrete with CM 1:3 etc. complete

finished dimension of concrete cover shall be 0.60 x 0.60 x 0.07 mt size.

Rates are inclusive of cost of angle frame, reinforcement, concrete, finishing

work and two pieces of MS flat 25 x 3 mm size as a angle.

95 Providing and Filling Brick Bats in soak well as per drawing and 13.00 Cum. 469.90 Rs. Four Hundred Sixty Nine &

specification etc complete. Paise Ninety Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

96 suppllying and filling cinder in sunk portion for all lead and lift tec 2.40 Cum. 791.68 Rs. Seven Hundred Ninety One

complete. & Paise Sixty Eight Only

97 Box cutting the road surface to proper slope and camber for making a base 23.00 Cum. 110.91 Rs. One Hundred Ten & Paise

for road work including removing the excavated stuff and disposing on the Ninety One Only

road side slope as directed up to 50 m lead.

98 Construction of Granular Sub base by Providing Couarse graded material 10.00 Cum. 1095.21 Rs. One Thousand Ninety Five

Spreading in uniform Layers With motor grader on prepared surface & Paise Twenty One Only

mixing by mix in place method with rotavator at OMC and Compacting with

Vibratory roller to achieve the desired density complete as per table 400-2.

99 Supplying of graded stone aggregate of following sizes (for W.B.M. Road) 8.00 Cum. 826.93 Rs. Eight Hundred Twenty Six

(3) Crushed Stone aggregate for Hard Quality up to 63mm size. & Paise Ninety Three Only

100 Spreading the stone aggregate for soling and W.B.M incl. filling the 8.00 Cum. 265.83 Rs. Two Hundred Sixty Five &

interstics forming the surface to required camber and gradient (ii)40 mm to Paise Eighty Three Only

63 mm .Size aggregate M/c.

101 Supplying of murum on W.B.M surface etc. complete. 25.00 Cum. 278.73 Rs. Two Hundred Seventy

Eight & Paise Seventy Three

102 Spreding blidage or road crust filling the gaps in metal and leveling to 25.00 Cum. 156.96 Rs. One Hundred Fifty Six &

cambert and gradient as directed .(i)Murrum. Paise Ninety Six Only

103 Rolling & consolidation water bound macadam (except laterite and kankar) 396.00 Sqm 34.05 Rs. Thirty Four & Paise Five

including watering not exceeding 150mm thk. (Main layer incl. binding Only

materials) includining filling in depression which occurs during the

process. (B)with Power roller exceeding 8 tonne and not exceeding

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

104 Construction Of Concrete Road Using Trimix System Having of any 18.00 Cum. 4504.29 Rs. Four Thousand Five

Thickness M-300 Concrete Mix With Providing And Fixing & Removing Of Hundred Four & Paise Twenty

"C" Channel Having Size 75Mm. X75Mm As Per Required Level Slope And Nine Only

Thickness Of Concrete Road Floor Levelling Of Place Concrete With

Surface Vibrator Machine,Dewatering System Device Finishing With Power

Floater Machine And Trowel Light Brooming On The Surface As Directed

With Providing Expansion Joint Size 20 X 190Mm. Using Of Concrete Cutter

Machine Including Curing Etc. Complete.

105 Providing and lixing CAPCELL HD 100 pre- moulded compressible filler 1.00 Sqm 795.27 Rs. Seven Hundred Ninety Five

board in black colour confirming to MORT&H Specifications (Clause 1015). & Paise Twenty Seven Only

having minimum density 95kg/cum.metre, non-staining with less than 1%

water absorption & compression recovery of 93% minimum as per

specification for 20 mm wide expansion joint including cutting to required

size and shape at all levels etc. complete as directed.

106 Providing and fixing 25 mm diameter backup rod having minimum density 7.00 Rmt 17.62 Rs. Seventeen & Paise Sixty

22 kg per cum (ASTMD - 3575) & compression strength of 0.40 kg per sqm Two Only

(ASTM 5249) and finishing with polysulphide sealant etc. complete. For

mm wide expansion joint.

107 Providing Groove cutting in C.C. Road incluing cleaning etc.complete as 23.00 Rmt 36.80 Rs. Thirty Six & Paise Eighty

per direction of Engineer incharge Only

108 Providing promoulded bituminous filler joints as per drawings (A)12mm etc 3.00 Sqm 548.31 Rs. Five Hundred Forty Eight &

complete as per direction of Engineer incharge. Paise Thirty One Only

109 Providing and filling 4 mm to 7 mm size graded stone vadagam gravel 11.00 Cum. 720.48 Rs. Seven Hundred Twenty &

reverse filter in F & P as directed by engineer in charge. Paise Forty Eight Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

110 Material charge used for the bore including labour and materials pvc bed 1.00 Nos. 150.00 Rs. One Hundred Fifty Only

plug having length of 0.45 mt. As isi 150 mm dia pipe.

111 Providing, Laying, Testing & Commissioning of 'C' Class Heavy Duty MS 60.00 Rmt 2240.48 Rs. Two Thousand Two

Pipe Confirming to IS 3589/IS 1239 including Welding, fitting like Elbows, Hundred Forty & Paise Forty

Tees, Flanges, Tapers, Nuts Bolts, Gaskets etc. and fixing the pipe on the Eight Only

wall/ceiling with suitable clamps/support frame and paining with two or

more coat of Synthetic Enamel Paint of required shade complete as

required. (A) 100 mm dia

112 Providing, Laying, Testing & Commissioning of 'C' Class Heavy Duty MS 20.00 Rmt 1652.39 Rs. One Thousand Six Hundred

Pipe Confirming to IS 3589/IS 1239 including Welding, fitting like Elbows, Fifty Two & Paise Thirty Nine

Tees, Flanges, Tapers, Nuts Bolts, Gaskets etc. and fixing the pipe on the Only

wall/ceiling with suitable clamps/support frame and paining with two or

more coat of Synthetic Enamel Paint of required shade complete as

required. (B) 80 mm dia

113 Providing and fixing of CI Butterflay valve ISI marked with 1.00 Set 5845.97 Rs. Five Thousand Eight

gunmetalworking parts with stainless steel spindel with necessary jointinh Hundred Forty Five & Paise

materials filing etc. complete as directed. (A) 100mm dia Ninety Seven Only

114 Providing and fixing of CI Butterflay valve ISI marked with 1.00 Set 4368.46 Rs. Four Thousand Three

gunmetalworking parts with stainless steel spindel with necessary jointinh Hundred Sixty Eight & Paise

materials filing etc. complete as directed. (B) 80mm dia Forty Six Only

115 Providing, fixing, testing and commissioning of non-return valve of 1.00 Set 9688.87 Rs. Nine Thousand Six

following sizes conforming to IS: 5312 complete with rubber gasket, GI Hundred Eighty Eight & Paise

bolts, nuts, washers etc. as required. (A) 100mm dia Eighty Seven Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

116 Providing, fixing, testing and commissioning of non-return valve of 1.00 Set 6743.74 Rs. Six Thousand Seven

following sizes conforming to IS: 5312 complete with rubber gasket, GI Hundred Forty Three & Paise

bolts, nuts, washers etc. as required. (B) 80mm dia Seventy Four Only

117 Supplying and fixing single headed internal Hydrant valve with 5.00 Set 5382.66 Rs. Five Thousand Three

instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron Hundred Eighty Two & Paise

wheel ISI marked conforming to IS:5290(Type-A) with blank Gunmetal/ Sixty Six Only

Stainless Steel cap and chain as required.

Single headed stainless Steel

118 Supplying and fixing first-aid Hose Reel with MS construction spray painted 5.00 Set 7606.61 Rs. Seven Thousand Six

in post office red, conforming to IS 884 complete with the following as Hundred Six & Paise Sixty One

required. 20 mm nominal internal dia water hose thermoplastic (Textile Only

reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal

globe valve & nozzel Drum and brackets for fixing the equipmets on wall.

Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe

and socket. 30 m

119 Providing, fixing, testing and commissioning of Weather proof standard fire 5.00 Nos. 3154.48 Rs. Three Thousand One

hose cabinet having single opening with M.S. Fabricated Stand, necessary Hundred Fifty Four & Paise

locking arrangement by allan key suitable for housing 1 no. hose pipe, 1 Forty Eight Only

no. Branch pipe & nozzle spaner.

120 Supplying & fooing 63 mm dia gun metal short Branch pipe with 25 mm 5.00 Nos. 1457.27 Rs. One Thousand Four

nominal internal diameter size nozzle conforming to IS 903 suitable for Hundred Fifty Seven & Paise

instantaneous connection to interconnect hose pipe coupling as required Twenty Seven Only

Stainless Steel (Grade 304)

121 Supplying and fixing 63 mm dia, 15 m long RRL Hose pipe with 63 mm dia 5.00 Set 3899.90 Rs. Three Thousand Eight

male and female couplings duly bound with GI wire, rivets etc. conforming Hundred Ninety Nine & Paise

to IS 636 (type-A) as required : Stainless Steel (Grade 304) Ninety Only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

122 Supplying and fixing 4 way Fire Brigade service inlet connection of CI body 2.00 Nos. 12252.93 Rs. Twelve Thousand Two

with gun metal instantanoeus male inlet coupling complete with chain & cap Hundred Fifty Two & Paise

as required for suitable MS pipe (150 mm) connection conforming to IS 904 Ninety Three Only

123 Getting provisional NOC and Final NOC and Renewal of NOC (During 1.00 Job 16950.00 Rs. Sixteen Thousand Nine

Defect Liability Period) for Fire Hydrant,Sprinkler system, Fire Hundred Fifty Only

Extinguisher, Fire alarm system etc. from local fire authority or any other

relevant statutory authority at initial stage and required various other stages

of construction work, including preparation of reports / drawings as per fire

authority requirement. Rate also includes renewal of Fire NOC during

defect liability period as per requirement. Main agency has to give

demonstration of all fire system to fire officer police / concern beneficiaries

& GSPHCL. Agencyhas to submit FDR of approved bank as per clause 2.0,

section 3, of Rs 20000.00 Or Quoted rate which ever is higher to GSPHCL for

minimum maturitperiod of Four yearsin favour of GSPHC, which will be

released after Successful Submitting of All Fire NOC at the completion of

defect liability period. Renewal Fire N.O.C. shall be submitted final

S.D.proposal. Agency has to borne charges like preparing and submission

of all the documents, Photographs, CD/DVD required togetthe N.O.C. from

concern fire department and also liaisoning work with concern

departments. Main civil agency has to get the pre-NOC from fire &

emergency department well before starting civil & the fire hydrant work

including sump & pump room work. For that professional & experience fire

agency has to prepare drawing of fire hydrant system, sprinkler system,

fire alarm system, DG set etc.as pertenderitem and making floor layout of

all fire pump panel, cable earthing etc in pump room. If any changes

required in drawings of sump & pump room.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Main agency has to inform in written before excavation of pump & sump

room. Agency has to calculate the total head & discharge required as per

NBC / local fire office requirement and as per site situation and submit fire

pump OEM specification curve foundation detail etc & get approval of

cable, panel drawings & specification. After completion of fire hydraunt

related work as per pre-NOC, tender specification & drawing approved by

fire department, agency has to do site visit with fire department & give the

testing & demonstration to fire officer & get the final NOC before handing

over of the building. Agency has to give live testing & demonstration of all

system to GSPHCL & police department jointly. For fire NOC fee separate

item is taken in tender. Agency has to quote the rate as per latest Gazettein

respective tender item.

Total Civil.Amount (Rs.)

Electrical Item Discription

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

124A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. 10.00 Point 461.00 RS: Four Hundred Sixty

mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC One only

insulated FRLS wire for earth continuity in FIA approved ISI mark medium

class white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected in Brick Wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner zari for

PVC pipe and (75mm depth GI boxfor Light point) boxes shall be filled with

cement mortar and finishing the surface to match the wall / ceiling

complete with approved make 5/6 Amp. ISI make modular type switch and

accessories mounted in 20 G. G.I. company fabricated metallic box

covered with appropriate front plate modules erected flushed with wall /

ceiling with necessary modular lamp holder / modular ceiling rose / HD

Connector ( make & model approved by EIC and matching colur with

switches accessories) as directed for concealed wiring. Light point.

Cat.-II.(Conductor resistance should be as per IS:8130/1984 )

Necessary sheet must be erected on all box to prevent mortar going into the

box.& for ceiling light Point & Junction box use deep Junction box of same

PVC Pipe make . Length of point wiring must not increase than 10 mtr. For

that necessary switch boards and their locations must be finalised before

execution by agency otherwise payment will not be done for extra long

point. (For future extention, if required, agency has to erect one higher size

metal box and modular plate as per instruction of EIC. Cost of blank plate

shall be paid as per tender item) [Wire must be having box packing][This

item include cleaning(inside/outside) of all GI switch boards,electric point

box,fan box,MCBDB & box cutting plaster finishing for modular plate

without any gap]

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

124B For loop on switch board ( with 3/5 pin socket and switch 6 Amp both 190.00 Point 234.00 RS: Two Hundred Thirty

having ISI Make) Cat-II Four only

124C For Secondary Light Point Cat-II 4.00 Point 166.00 RS: One Hundred Sixty Six

125A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. 330.00 Point 374.00 RS: Three Hundred

mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper PVC Seventy Four only

insulated FRLS wire for earth continuity in existing FIA approved ISI mark

medium class white colour 20/25 mm dia. embossed rigid PVC pipe

with PVC fitting fixed with adhesive solution erected on/in Brick Wall

/ slab along with continuous G.I. fish wire to draw wires and laid in

approved manner zari for PVC pipe and (75mm depth GI box for light

point) boxes shall be filled with cement mortar and finishing the surface

to match the wall / ceiling complete with approved make 5/6 Amp. ISI

make modular type switch and accessories mounted in 20 G. G.I.

company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall / ceiling with necessary modular

lamp holder / modular ceiling rose / HD Connector ( make & model

approved by EIC and matching colur with switches accessories) as

directed for concealed wiring. Light point-In Existing Pipe. Cat.-

II.(Conductor resistance should be as per IS:8130/1984 )

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Necessary sheet must be erected on all box to prevent mortar going into the

box. Length of point wiring must not increase than 10 mtr. For that

necessary switch boards and their locations must be finalised before

execution by agency otherwise payment will not be done for extra long

point. (For future extention, if required, agency has to erect one higher size

metal box and modular plate as per instruction of EIC. Cost of blank plate

shall be paid as per tender item) [Wire must be having box packing][This

item include cleaning(inside/outside) of all GI switch boards,electric point

box,fan box,MCBDB & box cutting plaster finishing for modular plate

without any gap]

125B For Two Way Controlled Light Point Cat-II-In Existing Pipe. 32.00 Point 479.00 RS: Four Hundred Seventy

125C For Bell Point Cat-II-In Existing Pipe. 16.00 Point 374.00 RS: Three Hundred

Seventy Four only

125D For Fan Point.(with 6A Modular type switch and Two Module hum free 5/6 50.00 Point 536.00 RS: Five Hundred Thirty

step EME step type Electronic fan regulator both having ISI Make ) Cat-II- Six only

In Existing Pipe

125E For Two Way Controlled Fan Point with with Hume free module type Eme 32.00 Point 641.00 RS: Six Hundred Forty One

5/6 step type electronic Fan with two module regulator Cat-II-In Existing only

125F For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI 50.00 Point 405.00 RS: Four Hundred Five

Make) Cat-II -In Existing Pipe. only

126A Providing and erecting Medium Class FIA approved and ISI mark white 300.00 Mtr. 24.00 RS: Twenty Four only

colour (embossed) RIGID PVC PIPES of following size complete erected

with necessary PVC fittings & Junction boxes fixed with adhesive solution &

clamps on / in wall / ceiling along with continuous fish wire to draw mains

with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

126B 25mm dia. 200.00 Mtr. 33.00 RS: Thirty Three only

127A Providing & erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 50.00 Mtr. 62.00 RS: Sixty Two only

KV grade with FIA approved ISI mark medium class 20/25/32 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution to

be erected on/in brick wall / slab along with continuous G. I. fish wire to

draw mains laid in approved manner with plastering by cement mortar &

finishing the surface to match the wall / ceiling complete with FRLS PVC

insulated wire for earth continuity. (Approved ISI make only) [a] 2 x

sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard colour code.

(with 20 mm dia. PVC pipe) (for point wiring and Lighting SB mains) [Wire

must be having box packing.] (Conductor resistance should be as per

127B For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 50.00 Mtr. 146.00 RS: One Hundred Forty Six

sq.mm. FRLS copper multi stranded conductor for earthing as per standard only

colour code. (with 25 mm dia. PVC pipe) (for MCBDB mains) [Wire must be

having box packing] (Conductor resistance should be as per IS:8130/1984

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

128A Providing & erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 1300.00 Mtr. 46.00 RS: Forty Six only

KV grade in existing rigid PVC pipe with PVC fitting fixed with

adhesive solution to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner with

plastering by cement mortar & finishing the surface to match the wall /

ceiling complete with FRLS PVC insulated wire for earth continuity.

(Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi

stranded conductor mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (with 20 mm dia.

PVC pipe) (for point wiring and Lighting SB mains) [Wire must be

having box packing.] (Conductor resistance should be as per

IS:8130/1984 ) In Existing Pipe.

128B For 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 900.00 Mtr. 120.00 RS: One Hundred Twenty

sq.mm. FRLS copper multi stranded conductor for earthing as per standard only

colour code.-In Existing Pipe (with 25 mm dia. PVC pipe) [Wire must

be having box packing] (Conductor resistance should be as per

129 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe 50.00 Mtr. 37.00 RS: Thirty Seven only

with necessary socket, PVC bushes saddle, Check-nuts etc. complete of

following sizes.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

130 Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked 96.00 Point 535.00 RS: Five Hundred Thirty

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 Five only

sq.mm (green) copper PVC insulated FRLS wire for earth continuity in

existing FIA approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution

erected in brick wall/slab along with continuous G. I. fish wire to draw

wires and laid in approved manner zari for PVC pipe & boxes shall be

filled with cement mortar & finishing the surface to match the wall / ceiling

complete with 16 Amp Modular type Swich and accessories mounted in

G. GI company fabricated metallic box covered with appropriate front plate

modules erected flushed with wall. (a) 16 Amp Indicator switch & 1 No. 6/16

A universal socket white colour suitable for 3 pin top duly both having ISI

mark. (Necessary Sheet Must Be Erected On All Box To Prevent Mortor

Going In To The Box) Cat.-II. ----In Existing Pipe(Conductor resistance

should be as per IS:8130/1984 )

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

131 Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv 32.00 Each 676.00 RS: Six Hundred Seventy

grade 2 x 4.0 sq.mm copper PVC insulated FRLS wire with 2.5 sq.mm Six only

(green) copper PVC insulated FRLS wire for earth continuity in existing FIA

approved ISI mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe with PVC fitting fixed with adhesive solution erected in

brick wall / slab along with continuous G.I. fish wire to draw wires and laid

in approved manner zari for PVC pipe & boxes shall be filled with cement

mortar & finishing the surface to match the wall / ceiling complete with

approved make 16 Amp. Modular type switch and accessories mounted in

20 SWG GI company fabricated metallic box covered with appropriate

front plate modules erected flushed with wall / ceiling. (a) 16 Amp Indicator

switch & 1 No. 6/16 A universal socket white colour suitable for 3 pin top

duly both having ISI mark. (A.C POINT ONLY) (Necessary Sheet Must Be

Erected On All Box To Prevent Mortor Going Into The Box) Cat.-II.---In

132A Providing & erecting Modular type accessories mounted on 20G. company 16.00 Each 139.00 RS: One Hundred Thirty

Fabricated Galvanised Metal box covered with appropriate front plate Nine only

modules erected flushed with wall / ceiling with : Cat-II TV Co-axial Socket

132B Blank plate single Cat-II 350.00 Each 16.00 RS: Sixteen only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

133 Providing ad erecting approved make single phase Single Door metal clad 16.00 Each 4901.00 RS: Four Thousand Nine

D.B. as per relevant indian standards ammended upto date. Hundred One only

Supplying and fixing following way single phase MCB distrubution board of

company fabricated with sheet box with powder coated inside and outside

after apply seven tank chemical process of MCBDB Door, back Side & Body

must be made of 1.2 mm thick CRCA sheet cover complete with suitable

integral single piece construction tinned copper busbar and link with all

necessary interconnection and with necessary size MS frame for mounting

MCBDB. Manufacturer must be provided (1) IP 43 and as per IS:8623-1 &

IEC 61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating

Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete with

loose wire box, terminal connectors for all incoming and outgoing circuits,

with suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no. tinned

copper neutral link, tinned copper earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

For 16 Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to

IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating 6 to

Amp. with NL suitable to operate on 240 Volt A.C. power. (6 Amp to 32Amp

SP MCB:-12 Nos as per site requirement & Instruction of EIC)

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP) should

be used as same as MCBDB) [Including Necessary numbering / marking on

box done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site as

per requirement

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

134 Providing & Erecting 2.0 mtr long Earthing system by making minimum 4.00 Each 7025.00 RS: Seven Thousand

bore of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology Twenty Five only

earthing. Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A) Earthing Electrode: outer pipe :- 88mm minimum O.D ,ISI 'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI

mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal

Should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal. The hot deep galvanising must

be done after above process. Galvanised thickness must be minimum

micron any where. SS Nut bolt:- 2 no. with washer suitable for 14mm dia.

hole must be provided at terminal. total minimum Weight(approx.) of earth

electrode with inside conductive material minimum should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%

(C) Back fill Compound :- Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 50 Kg. Necessary

test report must be submitted.

(D) Chamber and cover :- Earthing chamber should be size of

400mmX400mmX400mm depth and Cover should be heavy duty cast iron

with required size of 300mmX300mmX4mm thick.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Approved Make:- Sulah safe solution, Ashlok, Galexy, Indelec, Yansi

earthlid} (Strictly subject to item specification only) OEM has to submit all

detail & sample for approved before supplying

Water must be poured in bore before starting earthing. Earthing value

must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing upto

volt. Agency has to maintain earthing & its value for one year. If required.

Earthing must be done in the presence of A.E (GSPHCL)

135 For Above Earthing Additional charges for boring in hard rock soil (By 4.00 Each 276.00 RS: Two Hundred Seventy

Breaker) & filling soft soil in earth pit. (Certificate for soil have to given by Six only

DEE/AE along with Photographs).

136A Supplying and erecting 8W led lamps with following wattage capacity of 165.00 Each 111.00 RS: One Hundred Eleven

220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge only

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser suitable

136B Supplying and Erecting 3 W LED Lamps with following wattage capacity of 32.00 Each 69.00 RS: Sixty Nine only

220 to 240 voltage, minimum 15000 burning hours life, 500v in built- surge

protection, Polycarbonate diffuser , mounting suitable for E14 / E27 / B22

lamp holders, P.F >=0.5 (A) LED lamps integral type with pc diffuser

suitable LAMP holder.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

137 providing and erecting Polycarbonate body surface mounting LED Bulk 4.00 Each 780.00 RS: Seven Hundred Eighty

head type 9 watt Lighting Fitting with electronic driver having THD<15% only

,CRI>80,P.F.>0.95 And lumen output from luminaire 800lm , input voltage

range 90-300VAC , 50Hz cool white(3000 to 6500k), inbuilt driver having

THD > 80lm/w., -20degC to +60degC working temperature, AL frame with

Beam Angle 120deg.

138 Supplying and Erecting LED indoor fitting of approximately 4feet long with 100.00 Each 370.00 RS: Three Hundred

LED of wattage 0.2W to 0.5W assemble on single MCPCB with housing use Seventy only

as a heat sink shall be made from Aluminum extrusion having enough

strength (sample must be approved by EIC) with polycarbonate diffuser

with following specification:

(A) Company mark/name on the fitting.(B) Rated input voltage and

frequency: 220V to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D)

Rated input current : 0.2 Amp(E) Power Factor : Min. 0.90(F) ATHD : Max.

15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT: 6500K(I) CRI: Min.

80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @

L70(L) Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M)

Surge protection : Min. 2KV(N) IP rating: IP 20(O) IK rating : IK 02(P) Short

circuit , Open circuit & Reverse Polarity Protection must be provided(Q)

Fixing clamp design & strength should be sufficient to hold the fitting

erected on wall or ceiling.(R) 3 core copper wire of appropriate size with

earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer

has to submit 5 yrs free replacement Guarantee for complete Fixture)

[Approval will be given strictly subject to item specification]

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

139 Providing and erecting 10 watt LED battern mirror light(1 feet/2 feet as per 64.00 Each 164.00 RS: One Hundred Sixty

Mirror size ) having main housing aluminium extruded & front cover of Four only

polycarbonate . Electrically & photomatry parameters are as under : 240 V,

50 Hz, sysem voltage : 10w+10% ,PF 20.95 system Lumens min.1000 CCT

:3000K to 6500K ,CRI >80,THD<15 % ,Delivery Efficiency > 85 % LM

80Certified LED, 30,000 hrs@L70, Elecronic CC driver , insulated copper

wire for internal wiring ,IP20, Operating voltage :160 to 270 V, Surge -2KV

length og this fitting decided by EIC

140 Supply, Installation, Testing and Commissioning of suitable sweep, BEE 5 82.00 Each 2289.00 RS: Two Thousand Two

Star rated, Ceiling fan with Brush Less Direct Current (BLDC) permanent Hundred Eighty Nine only

ferrite magnet Motor, class of insulation: B, Rust free 3 nos.Aluminium

blades, 2 nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W) minimum 6.85,

Air delivery minimum 215 CMM, 350 RPM,230v (tolerance as per IS : 374-

2019), THD < 10%, compitible with electronic regulator unit for Speed

Control and all remaining accessories including safety pin, nut bolts,

washers, temperature rise = 75 degree C (Max.), suitable for 140 to

Voltage and rectifier circuit with surge, over current and overload

protection , 50 Hz, Single phase AC Supply, earthing etc. Complete as

required.[ Make shall be approved by Engineer in Charge] (A) 1200 mm

Sweep (48")(model & make approved by engineer in charge subject to

above specifications)

141 Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt 16.00 Each 169.00 RS: One Hundred Sixty

complete erected on existing polished wooden block or in M.S. box with Nine only

3mm thick white ISI mark laminated sheet.(Anchor-Chime

model,Rider,Vision make)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

142 Supplying & erecting 12 mm thick backelite sheet of approved make and 5.00 Sq.Mt 2289.00 RS: Two Thousand Two

grade on25x25x3mm red oxide painted angle iron frame suitable for r. Hundred Eighty Nine only

fixing ICDP SWITCH and energy meter (contractor shall make approved

drawing of Bakelite sheet To arrange required NO of Energy meter&

ICDPswitch -busbar etc as per Actual space available in electrical room at

143 Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with 300.00 Sq.In 5.81 RS: Five and Paise

red oxide be concealed in wall with necessary plastering & finishing ch Eighty One only

covered with 3mm thick Laminated sheet with grooving as directed of

following depth. 3" Depth

144 Providing and erecting metallic vitrified danger notice board as per 2.00 Each 69.00 RS: Sixty Nine only

language suggested by engineer incharge for MEDIUM VOLTAGE

installation to be erected as per IS-2551.

145 Providing and erecting required size Copper strip for earthing of H.T. OCB 20.00 kg 787.00 RS: Seven Hundred Eighty

/ ACB/ Transformer, LT panel board, Motors etc. using copper clamp.With Seven only

min 80 micron as per IS.Test Certificate must be submitted by agency.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

146A Supplying and erecting approved make GRP/FRP Perforated type Cable 20.00 Rmt 526.00 RS: Five Hundred Twenty

Tray Material – Corrosion Resistant Polyester Flame Retardant U.V. Six only

Stabilized Resin System - Manufactured from Pultruded Sections- Polyester

Resin System, Glass Content : 55 – 60 % - - Standard Length : 3000mm-

Support Span – 1500mm, Deflection L/200 - Specification NEMA FG1 1993-

UV Resistant - Flame Retardant – IS 6746 - Appendix K/UL 94, Very Low

Flammability - Specification Followed NEMA FG1 1993 Oxygen Index –

Minimum 30% as per ASTM D 2863 - Flame Spread (Extent of Burning) –

20mm as per Standard ASTM D 635 - Tensile Strength – 4000 –

Kg/Cm2 as per Standard ASTM D 638 - Flexural Strength – 2500 –

Kg/Cm2 as per Standard ASTM D 790- Izod Impact Strength – 130 Kg/Cm2

as per Standard ASTM D 256- Compressive Strength – 2500 – 5000 Kg/Cm2

as per Standard ASTM D 695- Barcol Hardness – 50 – 65. For Width -

300mm, Pultruded “C” Channel with 50mm Sides 4mm Thickness,

Loading 30 Kg./Mtr.

146B For Width - 150mm, Pultruded “C” Channel with 30mm Sides 3mm 20.00 Rmt 230.00 RS: Two Hundred Thirty

Thickness, Loading 15 Kg./Mtr. only

147 Providing and Erecting following size of TV Co-axial flexible cable 600.00 Mtr. 39.00 RS: Thirty Nine only

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly – Aluminium film bonded Al. Braids @

coverage of 65% overall sheated with black PVC insulation (FINOLEX/RR

KABLE/POLYCAB)a. RG-6

148 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 25.00 Mtr. 253.00 RS: Two Hundred Fifty

Aluminium conductor cable for 1100 volt to be laid 90 cms. Under ground Three only

or to be laid on wall with suitable G.I. heavy guage 1.6mm thick cable

clamp or in existing DWC pipe underground or road crossing or floor.(a)

For 4 core x 35Sq. mm

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

149 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 500.00 Mtr. 361.00 RS: Three Hundred Sixty

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps 1.6 One only

mm thick or in existing trench / pipe at road crossing or floor of following

size of cables.(A) 4 core 4 Sq. mm

150A Providing & fixing double compressed heavy duty flange type brass 30.00 Each 43.00 RS: Forty Three only

cable gland with rubber ring for P V C insulated armoured cable

complete with outgoing tails, insulating tape etc. For following size

cables. For 2 to 4 core x 4.0 Sq. mm (Sigma, MCI, Comet Make Only)

150B For 2 to 4 core 35.00 Sq. mm (Sigma, MCI, Comet Make Only) 4.00 Each 75.00 RS: Seventy Five only

151 Providing & fixing Solderless crimping type Copper lugs conforming to IS 220.00 Each 8.00 RS: Eight only

suitable for cable of following size evenly crimped with high pressure tool

& connected to switchgear terminals with brass/cadmium plated nut bolts in

an approved manner. For 1.5/2.5 to 6 Sq.mm Cable

152A Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte 160.00 Mtr. 56.00 RS: Fifty Six only

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required.For One wire 6.00 sq.mm. ( For Meter To DP/FP

152B For One Wire 16.00 Sq.mm 80.00 Mtr. 141.00 RS: One Hundred Forty

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

153 Providing & laying HDPE Double walled corrugated pipes (DWC) 350.00 Mtr. 117.00 RS: One Hundred

(conforming to IS: 16205 (part 24) 2018)) with minimum load required of Seventeen only

450N capacity with anti rodent and ultra violet material properties with

necessary connecting accessories of same material at required depth to be

laid 90 cms. under ground for laying of cable below ground / road surface

for enclosing cable and back filling the same to make ground as per

original. (A)For Outer dia.50mm and Inner dia. 38mm (Test

Certificate to be Submitted)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

154A For Wall & Terrace Street light Bracket:Providing and Fixing of wall and terrace 9.00 Each 487.00 RS: Four Hundred Eighty

bracket consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter and length Seven only

suitable for building face for fixing the brackets and having spread of Upto 0.70 mtr.

length with suitable degree angle as per site situation suggested by EIC. vertical plane

and suitable welded stiffner reducer and nipple with check nut complete painted with

one coat of red oxide and two coats of alluminium paint (Zinc Coating before

alluminium Paint is mandatory)with . complete with 150*150*2mm thick G.I plate

with 4no heavy duty galvanized jasti khila of required size or Single arm bracket

(pipe in pipe type) suitable for terrace as per design given by EIC Considering parfait,

height ,width and total height of building and type of led fitting .

For Street light Pole Bracket:Supplying and erecting street light pole bracket bracket

consisting of ISI mark "B" class G.I. Pipe 4.2 cm outside diameter complete with

suitable B class G.I. Sleeve tubing of 2 mm. thick and required size and approx.

Cms length suitable for 76.5 / 80 mm. required size of pole top having nuts and bolts

for fixing the brackets and having spread of Upto 0.70 mtr. length with 110 deg. with

vertical plane and suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of red oxide and two coats of alluminium paint.(Zinc

Coating before alluminium Paint is mandatory) (a) For single arm bracket. (Jindal /

Asian / Tata / Surya Prakash make Only) (Fabricators:- Ambica / Fab / Bajaj /

Impression equipment Only) (Test certificate to be submitted)

(a) For single arm bracket

(Jindal//Asian/Tata/Surya Prakash make Only) Fabricators:- Ambica / Fab / Bajaj /

Impression equipment Only) (Test certificate to be submitted)

154B (b) For Double arm bracket.(If Required) 1.00 Each 616.00 RS: Six Hundred Sixteen

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

155A Supplying & erecting Sintex or approved make SMC press moulded 1.00 Each 472.00 RS: Four Hundred Seventy

composite FRP. loop-in, loop-out approx. 2mm thick box complete with Two only

bakelite connector strip 4way & hinged doors having locking arrangements

with mounting clamp with nuts, bolts & washers suitable for erection on pole

with cable clamps& earth bolt of following size of box.a) 150mm x 125mm x

100mm [deep] ( For TV Cable )

155B b) 140mm x 140mm x 100mm [deep] ( For Street Light ) 10.00 Each 295.00 RS: Two Hundred Ninty

156 Supplying and erecting Fabricating terminal box for street light pole made 1.00 Each 702.00 RS: Seven Hundred Two

from 16 SWG M.S. sheet having following size complete with fixing only

arrangement for terminal board, with necessary hole for wire entry and exit

from the box. The box shall be provided with cover and hinges on one side

and bolting at other end The box shall be fixed by clamps fabricated from

25mm x 6mm flat.The box shall be painted with one coat of red oxide and

two coats of paint having following box size 330 mm x 260 mm x 140 mm

(depth). And Providing and fixing Terminal board of size 5.0 x 127 x

mm. bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with

suitable brass studs with nuts, washers and clamps of size 25 mm x 3 mm

suitable for pole painted with one coat of red lead paint. ) (Asian colour

must be used) ( If Required )

157 Supplying and erecting Coil Type Earthing Having coil Made From 8 SWG 8.00 Each 369.00 RS: Three Hundred Sixty

Hot Deep Galvanized iron Wired wrapped On 50 MM OD Round Pipe Nine only

Having Minium 50 Turn( Approximately 200 mm lenght) & Having

Contineous lenght Of 3 Mtr Gi wire To Connect Earthing Bolt & Burried In

Specially Prrepared Earth Pit Complete With Salt & Charcoal/Coke As

Required For Coil Type Earthing (Approximately Weight Of Coil 1 To

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

158 Supplying and erecting Light class G.I. "A" grade ISI make pipe having 25 20.00 Mtr. 171.00 RS: One Hundred Seventy

mm. dia. to be erected at road crossing or on floor as directed for laying One only

159 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 kv 60.00 Mtr. 46.00 RS: Forty Six only

grade ISI marked copper wires of following size to be erected as directed.

3 core 1.5 sq.mm. PVC insulated round copper wire ISI mark.

160 SITC of Outdoor aesthetically designed LED Flod Light Luminaire with total 9.00 Each 3512.00 RS: Three Thousand Five

consumption of Max. 90 W with single piece die cast aluminium housing, high power Hundred Twelve only

LED shall be mounted on high quality metal core PCB with extremely precison

designed heat sink complete with IP66 protection Class with polycarbonate /

thoughened glass cover the fixture should be suitable for pole/bracket mounting. The

fixture to comply both LM79 and LM 80 guidelines with LED module min.

lumen/watt with toughen Glass L70 at 50,000 hrs, provided with high quality

polycarbonate lenses for better light distribution. The Watt capacity of Each LED Must

be > 4 Watt in Street Light Fitting.The Fixture Should be able to be Pole Mounted and

also bracket mounted, provided with high quality driver for protection against high

and low Voltage cut Off, opertional for high amibient and high humid envirnoments,

THD of driver should be less than 10% and P.F > 0.95. Also the Fixture should meet

the following technical criterias Oprating range Voltage 160 to 270 V, system

efficiency >= 110 lm/w, and total lumens not less then 9900, CCT > 5000K, CRI >

beam angle 120 deg, surge immunity level at least 4 KV integral and 10 KV non

integral The Separate Potted driver should have over current, over voltage protection,

short circuit protection so that the fixture recovers once the fault is removed. In

addition to the above product should be operational in the temperature range of 0 deg

to 50 deg and humidity range of 10% to 90% RH. (Note:- The manufacturer /

authorized Channel partner of the manufacturer has to submit 5 yrs free replcement

Guarantee for complete Fixture)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

161 Supplying and erecting approved make Octagonal pole made from HR 8.00 Each 6917.00 RS: Six Thousand Nine

sheet steel. The pole should be made as per IS. and shall be coated with hot Hundred Seventeen only

dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box with Hot Deep Galvanised door having

nos. 180° operated hinges & 2 nos. Ln key locking with silicon rubber

gasket. Consist of terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail & MCB , Brass stud type terminal and arrangement

for cable termination to be erected on RCC foundation as per details given

by manufacturer and EIC considering site requirement.

Foundation Details: 1) Grade of RCC 1:2:4, 2) Grade of steel rainforcement

of RCC FE 415, 3) Clear cover to rainforcement 50mm, 4)Concrete vibrated,

5) use suttering / farma, 6)Hot deep galvanized average 70Micron, 7) Detail

drawing will be given by corporation. .( C ) 5 Mtr. Long 70 mm Top X

130 mm bottom dia, 3 mm thickness with 200mmX200mmX12mm base

plate, 4-M16 Bolts and 600mm long hot deep galvanized J-Bolt, nuts,

washers with 800mm under ground and 200mm above ground level

and 450mm dia. Foundation in 1:2:4 proportion.(Make: Bajaj, Walmart,

Ambica, Transril)

162 Supplying and erecting approved make single phase servo controlled 1.00 Each 6738.00 RS: Six Thousand Seven

voltage stabilizer suitable for input voltage range 180/25OV. And Hundred Thirty Eight only

output voltage range 225/235V. A.C. complete erected. (B) 3.0 KVA

(Make and model to be approved by EIC) Manufacturer Should have

give all test as per IS and other standard. They must have Given

Service During Defect Liability period When Falut occures Stabilizer

rectify any defect if any and give stability certificate at the time of

security deposit release.( Make: Fuji Electric, Microtech, Servomax,

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

163 Providing , erecting Universal Astro Intelligent streetlight control system 1.00 Each 12895.00 RS: Twelve Thousand Eight

Insu with weather Proof box for Indoor application 5 KVA ( As per attached Hundred Ninty Five only

specification )

164 Providing and erecting Approved make Earth fault Relay suitable to mount 1.00 Each 4934.00 RS: Four Thousand Nine

with inter connection to moulded case circuit breaker having CT ratio & Hundred Thirty Four only

MCCB rating as following along with shunt trip 220 V AC with all internal

connections & complete erected in existing M.S.housing. (1) 15 A - 100 A,

CT Ratio 1/200 (For Pump Panel)

165 Providing and erecting 240 volt MCB double pole switch for motor & 18.00 Each 599.00 RS: Five Hundred Ninty

Iductive load(C Curve) having 10 KA Breaking capacity and confirms to IS : Nine only

8828 with same company Metal box with earthing terminal having

following capacity. with necessary quarter Numbering with oil paint by

Painter. (a) 40 Amp Capacity. Cat III

166 Providing, erecting, fabricating the M.S. structure as per requirement of 80.00 Kg 77.00 RS: Seventy Seven

site as per structure design Including proper size approved by EIC of M.S. only

angles, flats, bars, square pipe, channels, sections (Tata, Jindal, Asian, JSI

Make) complete with cutting, welding, grinding and finishing duly painted

with Asian/Nerolac make premium quality oil paint and true care red oxide

metal primer,asian paint make with erection on site as per direction of

engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed

with M.S plate welding. Payment will be done on KG as per Actual weight.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

167 Supplying, installation, testing and commissioning of electric driven terrace 1.00 Set 33838.00 RS: Thirty Three Thousand

pump suitable for automatic operation and consisting of following, Eight Hundred Thirty Eight

complete in all respects, as required: (Terrace Pump) (a) Horizontal type, only

multistage, centrifugal, split casing

pump of cast iron body & bronze impeller with stainless

steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell

cage induction motor TEFC type suitable for operation on 415 volts,

phase, 50 Hz, AC

supply with IP55 class of protection for enclosure, horiziontal foot mounted

type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated

common base plate, coupling, coupling guard, foundation bolts etc.as

(d) Suitable cement concrete foundation duly plastered

and with anti vibration pads. FOR 450 LPM Terrace Pump. Note: The

head of the pump is selected in a manner so as to give a minimum

3.5kgf/cm2 pressure at the highest/farthest point.

168 Supplying & erecting approved make motor control cubical panel (Direct - 1.00 Each 8624.00 RS: Eight Thousand Six

on - line) made from 16 G. CRCA sheet duly epoxy powder painted inside Hundred Twenty Four only

and outside with hinged doors and locking, arrangement consisting of

suitable size of ON- OFF isolator (AC - 3/23duty) main fuses, single phasing

preventer, indicating lamps for R- Y - B phases, overload relay, Automatic

water level controller, Ammeter, Voltmeter each with two way selector

switch incoming, wires duly socket crimped, main contactor & overload

relay, start - stop push buttons, to be erected on angle iron frame grouted

on wall as directed. The isolator, overload relay & contactors will be of L &

T, Siemens or BCH make only. Rating of DOL Starter Panel as per

Terrace Pump Requirement

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

169 Providing and erecting PVC insulated PVC Sheathed flat flexible copper 90.00 Mtr. 171.00 RS: One Hundred Seventy

cable ISI marked approved make of size with all require accessories [d] 3 One only

Core x 6 Sq. mm for Terrace pump

170 Providing and fixing of Dial type Pressure Gauge having 100 mm dial & 3.00 Each 1513.00 RS: One Thousand Five

range of 0-14 Kg/cm2 with isolation ball valve. Hundred Thirteen only

171 Providing and fixing of Pressure switch with Needle valve (Make: 3.00 Each 1311.00 RS: One Thousand Three

Danfos,Indfos or equivalent make approved by EIC) Hundred Eleven only

172 Supplying, installation, testing and commissioning of 4-way Fire bridge 1.00 Each 8723.01 RS: Eight Thousand Seven

inlet connection made of Ci body with 4 Nos. of inbuilt Gun Metal NRV Hundred Twenty Three and

(Body type) with blank Cap & Chain as per IS:904 (Make:-SBJ, Winco, Paise One only

173 Providing and fixing of Air Release Valve including Ball Valve 25 mm dia. 3.00 Each 1602.00 RS: One Thousand Six

Hundred Two only

174 Supply, Installation, Testing and Commissioning of On- Off Push Button 5.00 Nos. 890.00 RS: Eight Hundred Ninty

Switch with all require.(Make: Danfos,Indfos or equivalent make approved only

175 Supply and laying of 4 core x 1.5 sq.mm Copper Armourd cable with all 180.00 Mtr 107.00 RS: One Hundred Seven

require accessories [From fire panel in pump room to fire duct for ON-OFF only

switch connection for fire system]

176 SITC of 4 Zone Fire Alarm Control panel as per attached technical 1.00 Each 7514.00 RS: Seven Thousand Five

Specifications (Make:Ravel/Morely/GST make only)(If required) Hundred Fourteen only

177 SITC of ABS Manual Call Point with key – break / Re settable 4.00 Each 345.00 RS: Three Hundred Forty

type.(Make:Ravel/Morely/GST make only)(If required) Five only

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

178 SITC of ABS Sounder - 24V, 95-105 db APPROVAL: CE Mark 4.00 Each 416.00 RS: Four Hundred Sixteen

(Make:Ravel/Morely/GST make only)(If required) only

179 Providing Fixing testing and commissioning of 3 core x 1.5 sq.mm FRLS 160.00 Mtr 46.00 RS: Forty Six only

Flexible round copper cable having insulation colour RED and BLACK for

Fire Alarm System.

180 Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having 6.00 Nos. 1991.00 RS: One Thousand Nine

capacity 6 kg Filled with Mono Ammonium Phosphate Powder 50% Hundred Ninty One only

confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Can

Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec,

Controllable discharge mechanism, Jet Range 5 Meters, Average Discharge

is 92%, applicable on Class A,B & C and electrically started Fire, Fire

Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded,

EPDM(Ethylene Propylene Diene Monomer) Rubber Hose with both end

Aluminum clamped, Internal Coating - Epoxy Powder coating, External

Coating - Pure Polyester Powder coating (UV Resistant),Brass forged CE

Marked valves with NRV & Auto Safety Release with safety Pin is of SS

material, Made up from 1.6mm thick sheet, Extinguishers confirmed to IS

15683:2018 and ISI marked. Referance Weight:-Gross Weight 8.9 Kg,

Empty Weight 2.9 Kg, 1. Necessary certificate & and guarantee must be

attached, 2. OEM has to provide wall mounting heavy duty

bracket/clamp, screw, hardware for installation. 3.Following printed

marking Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 3 Years. Following Printed

marking on equipment must be required:- Model No, Capacity, Gross

Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due.

[with necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make: Kanex, Firex, Safex)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

181 Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire 6.00 Nos. 6526.00 RS: Six Thousand Five

Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge Hundred Twenty Six only

mechanism fitted with 1 Meter Wire Braided Hose & Electrical non-

conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed

discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%,

Applicable on Class B, C and electrically started Fire, Fire Rating 55B,

Internal coating is not applicable & External coating is of enamel spray

painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked, CO2

Cylinder construction: hot spinning by seamless pipes & bearing ISI mark,

Body confirms to IS 7285 and PESO ( Petroleum and Explosives Safety

Organization) APPROVED, Minimum Wall Thickness 4 to 4.2 mm,

Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance

Weight:-Gross Weight 16.4, empty weight 11.9 Kg, 1. Necessary certificate

& and guarantee must be attached, 2. OEM has to provide wall mounting

heavy duty bracket/clamp, screw, hardware for installation. 3.Following

printed marking Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 5 Years. Following Printed

marking on equipment must be required:- Model No, Capacity, Gross

Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due.

[with necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make: KANEX, MINIMAX,

CEASEFIRE) (Make: Kanex, Firex, Safex)

182 Providing & Erecting PVC Panel trunking Perforated duct standard slot of 30.00 Mtr. 128.00 RS: One Hundred Twenty

Size 45mm X 45mm (Make:MK/Legrand/OBO) with required size of screw Eight only

as directed by EIC

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

183 Providing open well type horizontal submersible mono block pump set with 2.00 Each 10183.00 RS: Ten Thousand One

cast iron body having following specification [b] For 3 Phase open well Hundred Eighty Three only

horizontal mono block pump set suitable for 50 mm dia. delivery pipe with

10 mtr necessary Size 3 Core Flat copper flexible cable. 190LPM @ 20 Mtr

Head. (Body : Cast iron / Winding : Copper / stator : Copper / rotor :

Copper / shaft : SS 304 material test certificate from manufacture shall be

For 1.5 HP 3 phase open well pump single/ multi stage as per actual head

requirement as per site situation.

The model of the pump with respect to head and discharge will be

approved by EIC.

Pump should have following specification.

(1) Minimum 10mtr cu. flat cable of suitable size must be provided with

(2) Pump shall be installed as per manufacturer foundation/ erection

drawing or as per IS specification.

(Body full CI, stator winding- copper, rotor- copper, shaft- SS304, motor-

Energy efficiency)

184 Lowering of existing submercible motor pump set complete with 2.00 Each 848.00 RS: Eight Hundred Forty

required No. and size of pipes by means of proper chain pulley block Eight only

and pipe wrenches. Job includes stacking of pipes cronologically after

the checking of threads. For open well horizontal submercible pump

set for sump well. (i) 1.0 HP to 5.0 HP.

185 Providing & erecting ISI make medium duty (B class) galvanized MS 20.00 Mtr. 260.00 RS: Two Hundred Sixty

pipe with coupling, bend, union, reducer, tee, MS flange etc. with only

plumbing charges. [d] 50 mm dia

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

186 Supplying and erecting C.I. Swing check type non-return (reflux) valve 2.00 Each 1010.00 RS: One Thousand Ten

ISI marked with packing, flange, nuts and bolts etc.suitable for Hundred Ten only

following pipe size. [a] For 50mm dia.

187 Providing and erecting Two way Centre off Four pole MCB Change Over 1.00 Each 844.00 RS: Eight Hundred Forty

Switch (IS 13947-3 / IEC 60947-3) in existing box.(a) for 25 Amp Four only

188 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 20.00 Mtr. 65.00 RS: Sixty Five only

flexible Submersible copper cable approved make of following Size. (A)

For 3 Core x 1.5 Sq. mm.

189 Providing and erecting Miniature circuit breaker single pole 6A to 25A 4.00 Mtr. 111.00 RS: One Hundred Eleven

suitable to operate on 240 V A.C. system and having breaking capacity 10 only

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

190 Providing water proof straight joint in PVC insulated flat flexible 2.00 Each 188.00 RS: One Hundred Eighty

copper cable by using insulated material water proofing material and Eight only

making the joint complete. UP to 10 Sq.mm

191 Supplying and erecting Direct-on-line, Starter with 15A.rating contractor 2.00 Each 2026.00 RS: Two Thousand Twenty

and with 4-14A. range, directly operated thermal overload relay in sheet Six only

steel enclosure for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete

erected on P.W. Block with necessary connection.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

192 Providing & erecting weather proof, dust & vermin proof, floor mounted 1.00 Sq.Mtr 16230.00 RS: Sixteen Thousand Two

front operated indoor type cubical panel board having IP42 & above . Hundred Thirty only

protection as per require made from 2 mm. thick CRC M.S. sheet for outer

body & doors, 1.5 mm. thick CRC M.S. sheet for internal partitions with

necessary supporting angles, flats including skirting, bending, drilling,

welding, riveting with internal partitions & cable alley as per requirements

& instruction of engineer-In-Charge with erection of supplied switchgears,

busbars with suitable size of interconnecting PVC copper wire / Copper-

Aluminium strips, rubber gromets, rib, control wires, backelite control

fuses, measuring instruments, earth bus & earth bolts, foundation flange-

bolts-base plates, sufficient nos. of hinged doors, handle with locking

arrangement, rubber gasket complete with Required Nos. heavy Duty

Connector. heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete.The panel shall be

supplied with Seven Tank chemical process which shall be carried out

before applying painting, painted with powder coating. (The rates excludes

the cost of switchgears, busbars, interconnecting mains & Copper /

Aluminium strip, fuse, meters etc. The dimension shall be measured

excluding base beams) Factory inspection for verification of

quality,workmanship and as per drawing & testing before dispatch the

material as per tender condition. The standard companies switch gear shall

be used and only manufacturers at CPRI approved factory as per IEC

and shall be certified by that company whose switch gears are used after

fabrication for beneficial use. With 350 mm depth

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

Panel manufacturer have to give 3 years maintenance and service support if

in case of breakdown or fault. Panel manufacturer have to submit electrical

meter calibration report. Agency should design the panel in such a way that

there should not be any excess in panel area (sq.mtr) & length of bus bar

(mtr), if any excess occurs draw attention to GSPHCL at the time of approval

of G.A. drawing. Loading

and unloading of above item shall be done by hydra and skill work force

under supervision of electrical engineer and guidelines given by

manufacturer to avoid damage to the item. Picture of it to be submitted in

running bill / final bill.

Size of door and Ele. room / Pump room shall be checked by agency's

engineer before giving order. If found any problem in size discuss with

GSPHCL engineer for rectification before giving order. [Including

Necessary numbering / marking on PANEL done with red colour radium

sticker as per site requirement and instructions given by EIC on site. Font /

number size given by EIC on site as per requirement]

193 Pproviding and erecting Approved make Four pole moulded case circuit 3.00 Each 6112.00 RS: Six Thousand One

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal Hundred Twelve only

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

194 providing and erecting following additional parts for panel mounting 3.00 Each 865.00 RS: Eight Hundred Sixty

MCCBs (A)Extended operating rotary handle with pad lock with three Five only

position trip,off,on suitable for 25A to 250 A panel mounting cat-

III(Company must be same company of switchgear)

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

195 Providing and erecting busbar chamber confirming to IS-375 fabricated 0.80 mtr 4378.00 RS: Four Thousand Three

from 16 G.M.S. sheet, dust & vermin proof having hinged door with rubber Hundred Seventy Eight

gasket and necessary busbar supports with COPPER busbar having current only

density not more than 1.6 Amp. / sq.mm (Rated current / cross section area)

duly wrapped with colour insulation tape for phase sequence, three phase

& neutral each suitable for following current capacity with necessary

painting mounted on wall or pedestal frame of required size with necessary

incoming and outgoing connections with proper size of copper strip/wire

with lugs as directed. Suitable for 63/100 Amp.

It. Description of Item Qty. Unit Estimated Rate [Rs. Ps.] Amount

No. In In Words Rs.

196 Executing comprehensive (All -in-All) service & maintenance with spare parts as 1.00 Per 4790.00 RS: Four Thousand Seven

per terms & condition of tender for Fire hydrant Sprinkler system, Fire Extinguisher Tower Hundred Ninty only

with fire hydrant agency for defect liability period and copy of this contract will be

submitted before final bill. Agency has to quote rate accordingly. Agency has to

also provide the fitness certificate from system agency and submit to GSPHCL.

Agency has to compusory submit FDR of approved bank as per clause 2.0 section

3 of FDR of Rs4790 .00+ GST or or quoted rate (as per tender Premium % above)

which ever is higher to GSPHCL.for minimum maturity period of Five years in

favour of GSPHC .Which will be released after successful completion of AMC & at the

completion of defect liability period. in any case without submitting FDR final bill

submission not be done System agency has to maintain written record of service &

maintenance during defect liability daily period duly sigh by police dept. and

submitted regularly to GSPHCL. Agency has to give minimum three service and

demonstration and testing and training per Year of entire fire hydrant, sprinkler, fire

alarm, Fire Extinguisher etc. During defect liability period and necessary certificate

from police department and submitted to GSPHCL. Agency has to do maintenance as

per terms & condition alternate in tender. Refilling Hydraulically pressure for CO2

and ABC type fire extinguisher if required to get the NOC from fire department.

Agency has to give One live demonstration of fire Mock drill for fire fighting with

minimum 01 nos. CO2 and 01 nos. ABC type fire extinguisher at the time of handing

over this system to the Police department and another at the time of releasing final

Security deposit. The necessary certificate / photographs for that must be submitted.

Total Electrical.Amount (Rs.)

Signature of contractor Executive Engineer.

Gujarat State Police Housing Corp. Ltd.