TENDER FOR CONSTRUCTION OF STORE ROOM AND PAINTING OF KERB WORKS AT CYBERPARK CALICUT

Amount

PAINTING OF ROAD CRASH BARRIER AND ROAD FOOTH PATH/MEDIAN KERB- NON SEZ AREA

Removing dry or oil bound distemper,water proofing cement paint, dust, dirt and the like by scrapping,sand papering and preparing the surface smooth including necessary repairs to scratches etc.complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall & kerb surface

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade (2coat or more coats)

Finishing with epoxy paint (2 or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete on steel work

STORE ROOM- SEZ AREA

Clearing jungle including uprooting of rank vegetation, grass, brushwood,trees & saplings of girth upto 30cm measured at a height of 1m above ground level & removal of rubbish upto a distance of 50m outside the periphery of the area cleared.

Earth Work in excavation by mechanical means(Hydraulic excavator/manual means) over areas exceeding 30cm in depth, 1.5m in width as well as 10sqm on plan) including getting out & disposal of excavated earth lead upto 50m and lift upto 1.5m, as directed by engineer in charge in all kinds of soil.

Providing & laying in position cement concrete of specified grade including the cost of centering & shuttering- all work upto plinth level in 1:3:6

Solid block masonary using pre cast soild blocks (factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 foundation and plinth with thickness 15cm in CM 1:6 etc. complete

Filling available excavated earth(excluding rock) & broken laterite/block/brick pieces in trenches, plinth, sides of foundation, inside store room etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming & watering , lead upto 50m and lift upto 1.5m

Cement concrete flooring 1:2:4 finished with a floating coat of neat cement , including cement slurry complete.40mm thick with 20mm nominal size aggregate

Providing & laying autoclaved aerated cement blocks masonary with 230mm/300mm thick AAC blocks in superstructure above plinth level upto floor v level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of engineer in charge .

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree landings, balconies,shelves,chajjas, lintels,band,plain window sills,staircases etc above plinth level upto floor five level, excluding the cost of centering,shuttering & reinforcement with 1: 1.5:3

Providing & fixing precoated galvanised iron profile sheet, 0.5mm (+0.05%)total coated thickness with zinc coating 120grams /sqm as per IS :277, in 240mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet & polyster top coat 15-18 microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation & shoulde be supplied in single length upto 12metre as approved by the Engineer. The sheet shall be fixed using self drilling & self tapping screws of HILTI / Bosch of required diameter and length all complete with EPDM sealing washers with sealant. Rate should include cost of plastic caps of approved colour of UV resistance and button bolts, all as per manufacturers specification, ridge, piece, aprons, large boards, etc all accessories, all complete as directed by the engineer. (Includes gutter).

Centering & shuttering including strutting,propping etc. removal of formwork for foundation,plinth,lintel etc.

Steel Work in built up tubular (round ,square, hollow tubes etc. )trusses, including cutting, hosting,fixing in position and applying a priming coat of epoxy primer , including welding & bolted with special shaped washers etc. complete.

12mm cement plaster finished with a floating coat of neat cement in 1:4

Steel reinforcement for RCC work including straightening, cutting,bending , placing in position & binding all complete with TMT of grade Fe-500D or more

Finishing with epoxy paint (2 or more coats) at all locations prepared and applied as per manufacturer's specification including appropriate priming coat ,preparation of surface etc. complete on steel and concrete work.

Fixig of Existing Double leaf door with necessary fitting materials

Electrical Works with necessary light fittings,cabling including DB,main switch,RCCB etc.

Providing and fixing Powder coated (minimum thickness 50 micron) Aluminum works for doors, windows , ventilators etc. with Indal sections, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, top, bottom and sides with required EPDM rubber/ neoprene gasket etc., mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, CP brass/ stainless steel screws, hinges, tower bolts , window stay,lock etc. all complete as per architectural drawing and direction of Engineer-in-charge.Windows with glass of 5.50mm thick.

SWARAJ CONSTRUCTIONS

R. Sajikumar