Construction of Second Floor Mechanical & Electrical Engineering Department Dr. S.& S.S Gandhi Government Engineering College, Surat

Construction of Second Floor Mechanical & Electrical Engineering Department Dr. S.& S.S Gandhy

Government Engineering College, Surat.

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Demolition including stacking of serviceable 329.80 Cum 1110.75

materilas and disposal of unserviceable materials

with all lead and lift. (i) R.C.C. Work

2 Demolition of Brick work and stone masonry 670.40 Cum 577.92

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

and lift.(ii) In Cement Mortar.

3 Dismentaling tiled of stone floors laid in mortar 9055.40 Sqmt 50.11

including stacking of serviceable materilas and

disposal of unserviceable materials with all lead

4 Removing and scraping of old deteriorated 9373.60 Sqmt 20.55

plaster of any thickness fromm wall / R.C.C

member including stacking of serviceable

material and disposal of unserviceable from site

of work with all lead and lift

5 Providing and laying controlled cement concrete 208.60 Cum 7404.31

M-200 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Columns, pillars posts and struts 2nd .FLOOR

6 Providing and laying controlled cement concrete 74.40 Cum 7445.72

M-200 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

Columns, pillars posts and struts 3rd .FLOOR

7 Providing and laying controlled cement concrete 780.40 Cum 6989.20

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in Slab for 2nd Floor

8 Providing and laying controlled cement concrete 12.60 Cum 7030.61

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in Slab for 3rd Floor

9 Providing and laying controlled cement concrete 603.00 Cum 6348.86

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in beam for 2nd Floor

10 Providing and laying controlled cement concrete 26.80 Cum 6390.27

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in beam for 3rd Floor

Item Description of Item Quantity Unit Rate In Amount

11 Providing and laying controlled cement concrete 52.20 Cum 6972.03

M-200 and curing etc. complete including the

cost of form work but excluding cost of

reinforcement for reinforced concrete work in

(c) Chhajja for 2nd floor

12 Providing and laying controlled cement concrete 0.80 Cum 7013.45

M-200 and curing etc. complete including the

cost of form work but excluding cost of

reinforcement for reinforced concrete work in

(c) Chhajja for 3rd floor

13 Providing and laying controlled cement concrete 26.20 Cum 8856.69

M-200 and curing etc. complete including the

cost of form work but excluding th cost of

reinforcement for reinforced concrete work in

(c) Lintel for 2nd floor

14 Providing and laying controlled cement concrete 0.40 Cum 8898.10

M-200 and curing etc. complete including the

cost of form work but excluding th cost of

reinforcement for reinforced concrete work in

(c) Lintel for 3rd floor

15 Providing and laying controlled cement concrete 10.40 Cum 8004.25

M-200 and curing etc. complete including the

cost of form work but excluding th cost of

reinforcement for reinforced concrete work in

(E) Stair case for 2nd Floor to 3rd floor

16 Providing and laying controlled cement concrete 17.60 Cum 6233.72

M-200 for RCC work and curing complete

including the cost of form work but excluding th

cost of reinforcement for reinforced concrete

work in coping on 2nd Floor

17 Providing and laying controlled cement concrete 51.20 Cum 6275.13

M-200 for RCC work and curing complete

including the cost of form work but excluding th

cost of reinforcement for reinforced concrete

work in coping on 3rd Floor

18 Providing and laying controlled cement concrete 33.20 Cum 6095.35

M-200 and curing etc. complete including the

cost of form work and excluding the cost of

reinforcement etc. complete in RCC Vertical and

horizontal wall for all floor

19 Providing and laying controlled cement concrete 27.40 Cum 6136.76

M-200 and curing etc. complete including the

cost of form work and excluding the cost of

reinforcement etc. complete in RCC Vertical and

horizontal wall for all floor

Item Description of Item Quantity Unit Rate In Amount

20 Providing and fixing 0.9m height MS railing made 1233.60 Rmt 1357.44

from Round hollow MS pipe of 50 mm dia as

hand rail and Vertical connecting 35m dia pipe

at every 0.9m c/c with 2 horizontal support

mm dia and round ball at end including one coat

of primer of approved quality and two coats of oil

painting to all rail portion and accessories etc

completed as per detailed drawing as per

directed engineer inchage

21 Providing TMT Bar FE 500D reinforcement for 244012.50 Kg 78.34

R.C.C. work including bending, binding and

placing in position complete upto floor two level

22 Providing TMT Bar FE 550D reinforcement for 30944.00 Cum 96.04

R.C.C. work including bending, binding and

placing in position complete upto floor two level

23 Masonary work using Aerated light weight 1694.00 Cum 4632.68

concrete block having crushing strength not less

than 35 kg/sqcm for super structure above plinth

level upto 3rd floor level in cement mortar 1:5 (

1 cement : 5 fine sand ) complete as per

Technical Specification

24 Half Masonary work using Aerated light weight 116.60 Sqmt 1041.16

concrete block having crushing strength not less

than 35 kg/sqcm for super structure above plinth

level upto 3rd F level in cement mortar 1:4 (

cement : 4 fine sand ) complete as per Technical

25 Providing 15mm thick cement plaster in single 8309.20 Sqm 201.62

coat on Rough (Similar) side of single or half

birck walls / concrete wall for interior plastering

and finished even and smooth in C M 1:4 (1

cement : 4 coarse sand) and (1x1)cm groove at

juction of structure etc. comp. For 2ND floor

26 Providing 15mm thick cement plaster in single 2444.40 Sqm 226.18

coat on Rough (Similar) side of single or half

birck walls / concrete wall for interior plastering

and finished even and smooth in C M 1:4 (1

cement : 4 coarse sand) and (1x1)cm groove at

juction of structure etc. comp. For 3rd floor

27 Providing 10 mm. Thick cement plaster in single 7251.40 Sqm 183.76

coat for plastering on ceiling and soffits of stairs

and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) and (1x1)cm

groove at juction of structure etc. comp. For 2nd

28 Providing 10 mm. Thick cement plaster in single 74.40 Sqm 208.32

coat for plastering on ceiling and soffits of stairs

and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) and (1x1)cm

groove at juction of structure etc. comp. For 3rd

Item Description of Item Quantity Unit Rate In Amount

29 Providing and fixing 150 mm wide, approved 2115.60 Sqm 294.92

quality galvanized chicken wire mesh at the

junction of brickwork and RCC or between two

dissimilar surfaces at all heights. The mesh shall

be fixed using nails, rawl plugs, or tags in cement

mortar 1:3 before applying plaster. The work

shall include curing, necessary scaffolding, and all

related materials and labor, complete as directed

by the Engineer-in-Charge.

30 20mm thick sand faced cement plaster on walls 10367.20 Sqm 347.42

upto height 10 metres above ground level

consisting of 12mm thick backing coat of C.M. 1:3

(1-cement : 3-sand) and 8mm thick finishing coat

of C.M. 1:1 (1-cement : 1-sand) etc. complete.

31 Providing throating or plaster drip and moulding 1282.60 Rmt 43.74

to R.C.C. Chhajja.

32 Applying two coats of putty & two coats of 14103.40 Sqm 40.59

primer of approved brand and manufacture on

new wall surface to give an even shade including

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand

papered smooth. For all floor

33 Wall painting (two coats) with plastic emulsion 20916.74 Sqm 83.36

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth. For all floor

34 Painting (two coats) with plastic emulsion paint 18052.52 Sqm 89.04

of approved brand and manufacture on

undecorated ceiling surface to give an even shade

including throughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth. For all floor

35 Finishing wall with weather proof exterior 13385.20 Sqm 120.26

emulsion paint on wall surface (two coats)

including primer to give an required shape even

shade after thoroughly brushing the surface to

remove all dirt, and remains of loose powdered

materials.etc complete For all floor

Item Description of Item Quantity Unit Rate In Amount

36 Providing Plinth Protection to Building including 830.40 Sqm 2387.64

excavation in ordinary soil and laying cement

concrete 1:3:6 using stone aggregates of 40mm

nominal size in foundation layer 125 mm thick+

125mm thick sand layer below pre-cast Rubber

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pneumatic

compressed by mechanically pressed and as per

approved design including 75mm Sand layer

for levelling and filling the joint with sand in

proper line and level etc. complete, Including

Providing and fixing pre-cast concrete kerb stone

of grey cement based concrete block 30cm

length, 30cm height and 15cm thick made of

M250 grade concrete as per approved design and

including excavation for fixing in proper line and

level, filling the joint with C:M 1:3 (1cement:3

fine sand) etc. complete.

37 Providing erecting and fixing double coated ISI 30000.00 Litre 3.95

water tank of required capacity each with all

necessary fittings and connection etc. complete

38 Providing laying and jointing in true line and 600.00 Rmt 195.67

level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

39 Providing laying and jointing in true line and 300.00 Rmt 148.12

level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on Z clamp (Paid

Separately)p with the help of clamp at every two

metre C/C or shall be concelled as directed

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

40 Providing laying and jointing in true line and 320.00 Rmt 91.84

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concelled as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

Item Description of Item Quantity Unit Rate In Amount

41 Providing laying and jointing in true line and 280.00 Rmt 72.65

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold

water including fittings make as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

42 Providing, laying and jointing in true line and 240.00 Rmt 834.38

level 160 diametre U.P.V.C (Type B) conforming

to IS 13592-1992 with one end plain and other

end socketed with rubber ring, & fittings

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant,

pipe shall be fixed on Z clamp (Paid Separately)

using of PVC clamp of the size 160 mm diametre

x 210 mm length x 196 mm heigh at every

mm center to center or shall be concealed in

walls as directed including necessary fittings

such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

43 Providing laying (to level or slopes) and jointing 2516.60 Rmt 678.02

reinforced concrete Light duty non-pressure

pipes I.S. class NP2 of the following internal

diameter with collars and butt ends prepared for

collar joints including testing of joints

complete.(D) 300mm

44 Providing, laying and jointing in true line and 1482.00 Rmt 878.57

level 110 diametre U.P.V.C SWR (Type B)

conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, &

fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on Z clamp (Paid

Separately) using of PVC clamp of the size

mm diametre x 149 mm length x 145 mm heigh

at every 2000 mm center to center or shall be

concealed in walls as directed including

necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed

with adhesive solvent cement including cost of all

45 Providing and fixing on Z clamp (Paid 180.00 Rmt 280.23

Separately) and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside

Dia. Low densidy, complete with special falnge

compression type fittings, wall clipsetc. including

making good the wall ceiling and floor.(F) 75mm

Item Description of Item Quantity Unit Rate In Amount

46 Providing and fixing in PVC SWR cowel went 10.00 No 15.66

75mm dia to pipes.(B) 75mm dia.

47 Providing and fixing in PVC SWR cowel went 92.00 No 28.79

110mm dia to pipes.(B) 110mm dia.

48 Providing and fixing MS Z clamp on Wall or 1422.00 No 83.43

celling for Pipe Fitting including all type

necessary fittings and accessory etc. completed

as per directed engineer in charge.

49 Providing and fixing PVC SWR Nahni trap IS 60.00 No 599.64

14735 for drain - 100 mm diameter with jali of

the following nominal diameter of self cleansing

design with C.I scread down or hinged grating

including the cost of cutting and making good the

50 Providing and fixing wash down water closet 20.00 No 3706.70

(European type W C pan) with integral P and S

trap including jointing the trap with PVC pipe in

cement mortar 1:1 (1 cement five sand) including

providing and fixing plastic seat cover for wash

down WC with CP brass hinges and rubber

buffers back plastic seat and with complete

fitting such as lead valve siphon 15 mm dia brass

ball valve with polythene float CP brass handle

unions and couplings for connection with inlet

out let and over flow pipes 40 mm dia porcelain

enameled flush bend including cutting holes in

walls and making good the same connection the

flush bend with cistern and closet vitreous china,

including jet spray heavy duty SS 304 grade

cm long and 15mm dia Flush cock etc completed

as per directed engineer in-charge.

51 Provision and fixing water closet squatting orissa 16.00 No 3654.18

type W.C. pan size 580mm integral footrest and

100 mm P or S trap and in cluding 25 mm dia CP

brass flush valve and GI inlet connection etc.

comp. (A) Vitreous china long pattern white or

color {Hindustan, Cera, Parryware or equivalent }

52 Providing and fixing ball cock of approved. 6.00 No 189.84

quality as directed.(A) Copper Metal (ii) 50mm

53 Providing and fixing washbasin with single hole 48.00 No 2376.53

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good

the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

Item Description of Item Quantity Unit Rate In Amount

54 Providing and fixing Urinal of approved quality 10.00 No 1640.22

including connection with trap and with integral

longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

55 Providing and fixing PVC non-return fullway 20.00 No 389.86

wheel valve (A) 25mm dia.

56 Providing and fixing 600mm x 450mm bevelled 24.00 No 859.41

edge mirrror of superior glass mounted on 6mm

thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and

57 Providing and fixing C.P. brass towel rail comlete 16.00 No 616.42

with C.P. brass brackets fixed to wooden plugs

with C.P. brass scews (B) 600mm x 20mm size.

58 Providing and fixing CERA Bib cock with Wall 20.00 No 2657.31

Flange and aerator Cat.No. F1016151 with 15mm

dia extension nipple including all Fittings and

labour charges etc. Completed as per directed

engineer in charge.

59 Providing and fixing CERA Pillar cock with 20.00 No 4066.26

310mm long extended body and aerator Cat.No.

F1016102 including all Fittings and labour

charges etc. Completed as per directed engineer

60 Providing and fixing CERA Angle cock with wall 18.00 No 2045.25

flange Cat.No.F1016201 including all Fittings

and labour charges etc. Completed as per

directed engineer in charge.

61 Providing and fixing S.W. gully trap with C.I. 14.00 No 1246.92

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth

traps (B) 150mm x 100mm size P or R type

62 Constructing brick masonry chamber for 20.00 No 3172.41

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less

than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

455mm x 610mm intenal dimensions with frame

(IF required R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

Item Description of Item Quantity Unit Rate In Amount

63 Constructing brick masonry chamber for 20.00 No 4203.62

underground C.I. Inspection chamber and bends

with bricks having crushing strength not less

than 35Kg. Cm2 in C.M. 1:5 Precast RCC. cover

with frame 455mm x 610mm intenal dimensions

(IF required R.C.C. top slabe with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of

neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

64 Extra over items for every additional depth of 20.00 No 242.39

0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(i) for 455mm x 610mm

65 Extra over items for every additional depth of 20.00 No 264.86

0.1M. of part thereof beyond 450mm depth for

Brick masonry chamber.(i) for 500mm x 700mm

66 Providing cement vata (10cm x 10cm size) 1282.60 Rmt 24.28

quarter round in cement mortar 1:1 including

neat cement finishing watering etc. Complete

67 Providing and fixing polished 15mm-18 mm 26.80 sqmt 2187.66

thick black granite with Chamfered edge and

double side polished of approved quality in

between urinal or any structure and fixing with

cement slurry & adhesive including moulding of

both exposed edges as directed by engineering in

charge etc. complete.

68 Providing and laying Hand dresses Machine 5025.20 sqmt 1217.05

Mirror polished Blue Kota stone slab flooring

over 20mm (Average) thick base of cement

mortar 1:6 (1-cement : 6-coarse sand) or L.M.

1.1.5 (1-Lime putty :1.5 - coarse sand) laid over

and jointed with grey cement slurry mixed with

pigment to match the shade of slab including

rubbing and polishing including 3mm Epoxy

Groove etc. complete. (A) 20mm to 25mm thick

69 Providing and laying polished Kota stone slabe 281.60 sqmt 1130.79

25mm thick in risers of steps,skirting Dedo and

pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray

cement slury mixed with pigment to match the

shade of slab including rubbing and polishing etc.

70 Providing and laying Ceramic tiles 6mm thick in 396.20 sqmt 960.42

flooring treads of steps and landing laid on a bed

of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand ) finishing with flush pointing in

Item Description of Item Quantity Unit Rate In Amount

71 Providing and laying coloured glazed tiles of the 902.00 Smt 1513.28

size 300 mm x 200 mm x 8 mm / 300 mm x

mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement :

coarse sand) & jointed with white cement slurry.

72 Providing and fixing polished 18 mm thick Green 1619.20 sqmt 1113.02

Marble stone with Chamfered edge and polished

of approved quality in clading on sill and around

the doors/ windows/ ventilation with 20 mm

thick cement plaster CM (1:4) and fixing with

cement slurry & adhesive including moulding of

exposed edges as directed by engineering in

charge etc. complete.

73 Providing and laying machine cut free edge 58.80 Smt 951.42

machine mirror polished Kota stone 20mm-

25mm thick finished treads and risers with 1cm

projecting, nozing rounded moulding in tread

laid over 20 mm (av.) thick of CM 1:6 on treads

and 10mm thick CM 1:3 on risers jointed with

cement slurry including rubbing and polishing

incl. making Three No.s of grooves of size 3mm X

3mm along the length of treads etc. complete as

directed engineer in-charge.

74 Providing and laying China mosaic type water 5687.80 Smt 1392.79

proofing treatment on terrace including cleaning

the surface by wire brush as directed including

applying neat cement slurry @ 2.75 Kg/Sq.smt.

mixed with water proofing compound after

cleaning the surface, laying cement concrete

using brickbats 25 to 100mm size well immersed

in water with 50% of cement mortar 1:5 (1

cement :5 coarse sabd) mixed with water

proofing compound over 20mm thick layers of

cement mortar 1:5 (1 cement :5 sand) to

required slope including rounding of junctions of

walls and slabs and after two days of proper

curing, applying second coat of cement slurry

finishing the surface with rate 20mm thick

cement mortar 1:4 and china mosaic tiles and

finally finishing the surface with white cement

slurry and after finishing the whole terrace shall

be flooded with water for a period of two weeks.

75 Providing and laying cement concrete flooring 206.20 Smt 374.14

1:2:4 (1-cement : 2-coarse sand : 4-graded stone

aggregate 20mm nominal size) laid in one layer

and finished with a floating coat of neat cement.

(A) 50mm thick.

76 Providing And filling with good quality 92.80 cumt 285.83

sinder(steam coal) as directed by engineer in

charge in sunks in layers of 15 cm thick,including

watering,placing ,ramming well etc as directed,

Item Description of Item Quantity Unit Rate In Amount

77 Providing and fixing two-track sliding window 474.60 Sqm 3851.53

system made of standard extruded colour

anodized aluminium sections equivalent to Jindal

Series-C (30 mm), comprising shutter top/side

section No. 21675, shutter bottom section No.

20772, shutter interlock section No.

frame bottom with gutter section No. 20878, and

frame top & side section No. 20877, glazed with

mm thick transparent tinted float glass in

shutters, including EPDM rubber gaskets, air-lock

strip, and sealing of joints with approved silicone

sealant, complete with standard extruded colour

anodized aluminium coated fittings such as

rollers, handles, stoppers, screws, and all

accessories, including fixing in position,

alignment, and making good, complete in all

respects as directed by the Engineer-in-Charge.

78 Providing and fixing standared extruded of 177.40 Sqm 1175.56

alluminium section of size 63mm x 38.10mm x

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete for

79 Providing and fixing standared extruded of 16.40 Sqm 1525.00

alluminium section of size 63.50 x 38.10 x

mm(of Jindal Section no:4605,@ Wt 1.094Kg /

Rmt with colour anodized alluminium frame with

5 mm thick transparent bronze colour tinted

float glass as details etc complete for Fix window.

80 Providing and fixing in position standard 3.00 Sqm 1874.56

extruded approved quality colour anodized

aluminium ventilator with outer frame made of

Jindal Section No. 21458 (weight 0.650 kg/Rmt),

fitted with 5 mm thick Bajari figure adjustable

tinted glass louvers fixed to aluminium strip

blades, including all necessary fixtures,

fastenings, labour, tools, and equipment,

complete as per detailed drawings and as

directed by the Engineer-in-Charge. (For

Item Description of Item Quantity Unit Rate In Amount

81 Providing and fixing aluminium frame door with 50.40 Sqm 4482.38

side hung double shutter, having factory

fabricated standard extruded colour anodized

aluminium hollow section FRAME and 35 mm

thick FLUSH DOOR SHUTTERS, solid core, both

sides pre-laminated finish, shutters fixed in

aluminium frame with aluminium “U” type

beading, including fixed glazing panel above the

shutter, stainless steel handles (150 mm long) on

both sides, hinges, fittings, fixtures, fasteners and

all accessories complete, as per manufacturer’s

specification and as directed by Engineer-in-

82 Providing and fixing aluminium frame door with 42.00 Sqm 4226.85

side hung Single shutter, having factory

fabricated standard extruded colour anodized

aluminium hollow section FRAME and 35 mm

thick FLUSH DOOR SHUTTERS, solid core, both

sides pre-laminated finish, shutters fixed in

aluminium frame with aluminium “U” type

beading, including fixed glazing panel above the

shutter, stainless steel handles (150 mm long) on

both sides, hinges, fittings, fixtures, fasteners and

all accessories complete, as per manufacturer’s

specification and as directed by Engineer-in-

83 Providing and fixing FRP of 35mm thick Fiber 49.60 Sqm 1269.63

Glass shutter with 1.5 to 2.0 mm thick fire

retardent grade FRP skin in depressed panel

design having extra reinforcement on sides &

edges & in Gel coat finish. The core of the shutter

is to be filled up with injected retardent grade

polyurethane foam done in situ alongwith

embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame &

shutter is to be water proof ,weather proof,

termite proof & resistance to mild acid/alkali.

Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures &

84 Providinfg and fixing Safty grills of required 26837.20 Kg 113.22

pattern for windows/ Door using necessary M.S

angle/ M.S pipe, M.S flats and other structural

steel at required spacing including cutting,

welding and fabriction etc. including one coat of

primer of approved quality and two coats of oil

painting as per detail drawing etc complete.

85 Providing and fixing MS Lader of required 600.00 Kg 95.95

pattern with MS Pipe (30mm dia ) round or

square bars (55x55x6mm) at required spacing &

with round headed bolts and nuts or screws or

welding including primer coat of approved

quality and two coats of oil paintas as directed

by engineer in charge

Item Description of Item Quantity Unit Rate In Amount

86 Treatment to all structural members of the 2464.00 Sqmt 11.36

existing building, including clearing and grubbing

in and around the building structure, comprising

removal of grass, bushes, shrubs, saplings, and

existing trees having girth up to 300 mm,

removal of previously cut tree stumps, and

disposal of all unserviceable materials, by manual

complete as directed by the Engineer-in-Charge.

87 Writing letter or figures on any surface with 400.00 No 3.75

black japan paint or thick white paint (ii) Indian

or block (Letters/Figures)

88 Providing and applying corrosion protection 3040.00 Kg 197.46

treatment to existing steel reinforcement in any

RCC structure. The work shall include cleaning of

exposed steel by wire brushing or sandblasting

to remove rust, loose particles, and

contaminants, followed by application of an

approved corrosion-inhibiting primer and a

protective coating as per manufacturer’s

specifications. The work shall be executed as

directed by the Engineer-in-Charge, ensuring

proper adhesion and protection of all exposed

reinforcement, complete for all floors.

89 Providing and laying and fixing 50 mm thick 219.20 sqmt 1491.03

expansion joint by hydro cell semi rigid UV

resistance with high performance laminated

closed cell polythene foam joint filler in sheet

foam as directed, etc. complete.

90 Applying and providing Expansion joint sealing 198.40 sqmt 4772.00

System on 100 mm vide joint including cleaning

of exansion joint by mechanical means provision

of adhesive and flexible membrane with required

bond length as per menufracturer specification

and 4mm thick alluminium strip covering with

one side sloted and bolted with suitable system,

inclusive of all manpower, machinery and

material as per specification and as directed.

91 Providing and filling the expansion joint by 263.20 sqmt 515.39

Thioflex 600 polymer or equivalent confirm to BS

4254-1983 as per required shade and

manufactured specifi-cation by making groove of

50 mm x 12.5 mm lather by cutting or by

repairing groove and removing mortar drop or

any other foreign materials including applying

primer and filling required size (oversize of joint

PU foam etc. complete.

92 Providing and fixing 25 cm Wide & 3mm thick 321.40 sqmt 1054.34

exterior composite panel on existing expansion

joint horizontally & vertically with all material,

hardware, acessories & fittings etc completed.

Item Description of Item Quantity Unit Rate In Amount

93 Supply, fabricate, and install steel of 8mm 340.00 No 111.10

diameter rebar, with minimum 80mm

embedment in concrete using 10mm minimum

drill diameter, and secured with chemical of

Fischer FISV 360 or equivalent material etc

completed as directed engineer incharge

(contractor should check performing pull-out

94 Supply, fabricate, and install steel of 12mm 340.00 No 141.40

diameter rebar, with minimum 120mm

embedment in concrete using 14mm minimum

drill diameter, and secured with chemical of

Fischer FISV 360 or equivalent material etc

completed as directed engineer incharge

(contractor should check performing pull-out

95 Supply, fabricate, and install steel of 16mm 340.00 No 191.90

diameter rebar, with minimum 160mm

embedment in concrete using 18mm minimum

drill diameter, and secured with chemical of

Fischer FISV 360 or equivalent material etc

completed as directed engineer incharge

(contractor should check performing pull-out

96 Supply, fabricate, and install steel of 20mm 340.00 No 212.10

diameter rebar, with minimum 200mm

embedment in concrete using 22 mm minimum

drill diameter, and secured with chemical of

Fischer FISV 360 or equivalent material etc

completed as directed engineer incharge

(contractor should check performing pull-out

97 Providing and fixing Temporary mild steel 2.00 Job 141400.00

section ladder of 1.2 m wide including making

waist of ladder with 4 no of 65x65x6 mm equal

angle and steps of size 1.2 x 0.30 m size with

40x40x6 mm outer frame and 0.30 m length

40x40x6 mm section in short direction and at

top 3 no of 15x2.5 mm flat 1.2 m long welded in

longer direction and vertical 12 mm square bar

at 5” c/c with 25 mm dia mild steel galvanised

pipe as hand rail welded and applying priming

coat of red lead and two coat of oil painting

including placing and fixing with required

Support steel structure making good the same etc

complete for actual work completion time

limit.this stair will be provided for access to work

from out side of building for ground level to third

floor terrace level.the whole temporary structure

of mild steel stair should be dismental after

completion of work and it is property of

Item Description of Item Quantity Unit Rate In Amount

98 Providing upto floor two level precast cement 47.40 Sqmt 810.17

concrete jali or grill 1:2:4 mix (1- Cement : 2-

coarse sand : 4-graded stone aggregate 6mm

nominal size) reinforced with 1.6 mm dia. Mild

steel wire including roughening,cleaning, fixing

and finishing in cement mortar 1:3 and curing

complete. (A) 50mm thick

99 Providing and Fixing 6 mm thick Lexan 1502.00 Sqmt 1441.90

Polycarbonate multi wall roofing sheet fixed with

hilti screw and rubber silicon sealer and

alluminium strip of size 50 x 3 mm etc complete

as directed by Engineer in charge.

100 Steel work, welded in built up sections framed 22829.40 KG 59.32

work including cutting, hoisting, fixing in position

and applying a priming coat of red lead paint.

(A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in

main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like

101 Charges for making holes from 25 mm to 160 200.00 Nos 606.00

mm dia in RCC wall, slabs or any other RCC

members by diamond core cutting machine of

HILTI or equivalent including disposing the

debris. For all floors .

102 Providing and fixing coloured self adhesive PU- 180.00 sqm 4586.41

Tactile tile, ground surface indicators of

Polyurethane) of size 300mm x 300mm for

guiding/warning to the visually visitors in the

centre/side of the pedestrian/approach pathway

as per specification and guidelines complete in all

respect to the entire satisfaction of in charge.

103 Providing and fixing acrylic multilingual Braille 100.00 Nos 1696.80

(raised dots) DIRECTIONAL SIGNBOARDS of size

225 x 150mm designed as per accessibility

standards and having 3.5mm thick acrylic base

plate with Upper Case San Serif words made of

white acrylic non glare cut out letters of height

15mm raised not less than 0.8mm above base

plate and the equivalent word written in Hindi

with Devanagari non glare acrylic letters of

height 15mm raised not less than 0.8mm above

base plate and having a non-glare acrylic cut

arrow pointing in the required direction. Each

signboard to be fixed as per manufacturers

specifications on the wall at the approved

location and at a height of 1200mm from FFL

complete as per design / specifications and

guidelines as per the entire satisfaction of the

Engineer-in-charge

Item Description of Item Quantity Unit Rate In Amount

104 P& F BRAILE INDICATOR OF SIZE 170 MM X 60.00 Rmt 820.12

35MM FOR HANDRAILS OF THE APPROVED

DESIGN AND MAKE HAVE BRAILE DOTS RAISED

0.5 MM ABOVE BASE PLATE TO BE INSTALLED

AT SPECIFIC LOCATIONS AS PER DIRECTION OF

ENGINEER IN CHARGE

105 Providing and fixing of conspectus tape 50mm 112.00 Rmt 99.99

width on of treads in staircase including cutting

pasting etc. As per harmonised guidelines

complete in all respect to the entire satisfaction

of engineer in charge.

106 Providing and Fixing 15 mm thick 300 mm x 300 90.00 sqmt 1208.97

mm Tactile Warning Tiles (Attention Tiles i.e.

Tactile Warning Surface Indicator {TWSI}) of

Johnsan Endura Tac Button Yellow Plus or

equvqlent make in flooring laid on 20 mm thick

cement mortar 1:6 (1 cement : 6 coarse sand) on

new surface and jointed with cement slurry

including finished with flush pointing & cleaning

the surface for all floors as per detailed drawing

etc. complete as directed by Architect or

Engineer in charge. Thse tiles shall be Anti Skid,

Chemical Resistant, Fade Proof, Frost - Heat &

Weather Proof, High Flexural Strength, Highly

Durable, Stain Resistance . All Tactile Warning

Tiles meet the specific size and dimension

standards as required by ISO/FDIS

107 Demolition and disposal of unserviceable 172.00 cumt 639.72

materials with all lead and lift.(i) Cement

108 Dismentling steel work including distempering 3372.00 Kg 3.85

and stacking the materials with all lead and lift.

109 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain 320.00 Rmt 78.51

water pipes with fittings and clamps including

stacking the materials with all lead and lift ( for

any dia, of pipe)

110 Dismantling santtary fittings like wash basin . 56.00 Nos 425.93

W.C. pan Indian and European type, flushing tank

etc. including stacking the materials with all lead

111 Dismentling doors, windows, ventilators etc. 2.00 Nos 263.90

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and

lift.(ii) Exceeding 3 Sq.M. in area.

Item Description of Item Quantity Unit Rate In Amount

112 Treatment A: 246.00 Sqmt 372.69

Cleaning of all surfaces with a steel wire brush,

followed by application of low-dose polymer

plaster in CM using OPC-53 grade cement and

white sand, mixed with 50–80 ml SBR (Styrene

Butadiene Rubber) per bag of cement, and

carrying out proper curing. The item also

includes stacking of serviceable material,

disposal of unserviceable material with all leads

and lifts . The work and adopted methodology

shall be executed in accordance with the

Structural Audit Report or as directed by the

Engineer-in-Charge, applicable to all floors.

113 Treatment B 2124.00 Sqmt 430.26

Repairing the existing surface with polymer

treatment involves removing and scraping away

old deteriorated plaster of any thickness from

walls or RCC members. After plaster removal, the

surface should be cleaned with a water jet. A

bonding coat (Cement + SBR + Water + grouting

chemical powder) should then be applied.

Following this, apply a high-dose 15 mm thick

cement mortar (CM) 1:4 (using OPC-53 grade

cement) in a single coat of polymer plaster, with

the addition of 250 ml of SBR and 140 ml of

Super Plasticizer, and ensure proper curing. The

process also includes stacking serviceable

material and disposing of unserviceable material

from the site with all necessary leads and

lifts.The work and adopted methodology shall be

executed in accordance with the Structural Audit

Report or as directed by the Engineer-in-Charge,

applicable to all floors.

Item Description of Item Quantity Unit Rate In Amount

114 Treatment B+C 1050.00 Sqmt 786.79

Repairing the existing surface with polymer

treatment and grouting in cracks involves the

following steps: removing and scraping away old

deteriorated plaster of any thickness from walls

or RCC members; cleaning the surface with a

water jet after plaster removal; applying a

bonding coat (Cement + SBR + Water + grouting

chemical powder) before the polymer plaster;

filling cracks with epoxy/acrylic injection

grouting using standard procedures; applying a

15 mm thick high-dose cement mortar (CM) 1:4

(using OPC-53 grade cement) in a single coat of

polymer plaster, with the addition of 250 ml of

SBR and 140 ml of Super Plasticizer; and

ensuring proper curing. The process also

includes stacking serviceable material and

disposing of unserviceable material from the site

with all necessary leads and lifts. The work and

adopted methodology shall be executed in

accordance with the Structural Audit Report or as

directed by the Engineer-in-Charge, applicable to

115 Treatment D+K 812.00 Sqmt 2440.16

Repairing of existing slab by cleaning all surfaces

with a wire brush, cleaning all corroded

reinforcement bars with mild nitric acid, and

applying zinc-rich primer to exposed steel bars;

filling large cavities with suitable grouting

chemicals; fixing injection grouting plastic tubes

in cavities or cracks; applying high-dose polymer

plaster treatment using SBR; injecting

acrylic/epoxy-based grout into cracks through

the installed plastic tubes with high pressure;

carrying out strengthening measures by welding

additional TMT (FE 550D) steel bars with rings

wherever required; and providing ISMB 100 at 3’-

0” c/c with proper anchoring into surrounding

beams. The treatment includes proper curing,

stacking of serviceable material, disposal of

unserviceable material with all leads and

lifts.work and adopted methodology shall be

executed in accordance with the Structural Audit

Report or as directed by the Engineer-in-Charge,

applicable to all floors.

Item Description of Item Quantity Unit Rate In Amount

116 Treatment E 3238.00 Sqmt 2793.66

The work shall begin by supporting the

surrounding structure with adequate steel props,

followed by cleaning all corroded reinforcement

using mild nitric acid and applying a zinc-rich

primer. Major cavities shall be filled with

approved grouting chemicals, after which 10 mm

L-shaped bars shall be installed as shear

connectors in a zigzag pattern on column faces at

2 ft centre-to-centre spacing. A high-dose SBR-

based polymer mortar plaster (200–250 ml/bag

with white sand) shall be applied to create a

rough surface for proper bonding of the

upcoming Foundation Jacketing system. A new

M25 pad foundation, 600 mm thick and 1.89 m ×

1.89 m in size, shall then be constructed using

Recron-3s fibres (12 mm, 125 g/bag) and super-

plasticizer, reinforced with two layers of 10 mm

bars at 75 mm c/c (top and bottom), from which

the jacketing reinforcement shall be erected.

Additional reinforcement comprising eight

mm TMT (FE 550D) bars and six 16 mm TMT (FE

550D) bars shall be placed around the existing

column with 10 mm rings at 75 mm c/c bent to

135 degrees. A minimum 75 mm thick RCC

jacketing layer shall then be applied around the

old column using a mix of 75% M25 concrete and

25% micro-concrete with Recron-3s fibres and

required admixtures, extending up to the

117 Treatment F 1590.00 Sqmt 330.27

Repairing the cracked surface includes the

following steps: cutting out cracks to a V-section,

cleaning out all dirt and loose material, and

wetting the surface. Next, apply a polymer

bonding agent (Dr. Fixit) on the existing concrete

surface. After this, grout with a cement and sand

slurry in a 1:3 ratio (1 part cement, 3 parts sand)

mixed with SBR. Finally, apply a polymer-based

paint such as Apex Ultima, Max Shield, or an

equivalent ISI-marked company paint. The work

and adopted methodology shall be executed in

accordance with the Structural Audit Report or as

directed by the Engineer-in-Charge, applicable to

Item Description of Item Quantity Unit Rate In Amount

118 Treatment H 3392.00 Sqmt 2209.88

Providing and laying jacketing to R.C.C. columns

involves the following steps: first, clean all

corroded steel bars with mild nitric acid and

apply zinc-rich primer on the steel bars. Fill any

large cavities with grouting chemical. Next, apply

12mm L bars in a zigzag pattern on the column

face at 600mm c/c. Apply a high-dose SBR

polymer rough plaster for proper bonding of the

jacketing. Then, place 10 no. 20mm tor and 4 no.

16mm tor TMT (FE 550D) vertical bars with

10mm rings at 75mm c/c with a 135-degree

bend. Perform jacketing with a minimum

thickness of 75mm or as required, using M250

concrete mixed with micro concrete,

polypropylene fiber, and super plasticizer. This

mixture should be prepared with 75% micro

concrete, 25% M250 concrete + 12mm long

polypropylene fiber (600 gm/cum) + super

plasticizer (0.3 to 0.9% by weight of cement).

Complete the process with shuttering and curing,

including all necessary materials and labor. The

work and adopted methodology shall be

executed in accordance with the Structural Audit

Report or as directed by the Engineer-in-Charge,

applicable to all floors.

119 Treatment H1 1118.00 Sqmt 2959.30

Providing and laying jacketing to R.C.C. Beams

involves the following steps: first, clean all

corroded steel bars with mild nitric acid and

apply zinc-rich primer on the steel bars. Fill any

large cavities with grouting chemical. Next, apply

12mm L bars in a zigzag pattern on the

connected slab face at 600mm c/c. Apply a high-

dose SBR polymer rough plaster for proper

bonding of the jacketing. Then, place 6 no. 16mm

tor at bottom and 4 no. 12mm tor TMT (FE

550D) at side with 8mm C type rings at 100mm

c/c with a 135-degree bend. Perform jacketing

with a minimum thickness of 75mm or as

required, using M250 concrete mixed with micro

concrete, polypropylene fiber, and super

plasticizer. This mixture should be prepared with

25% micro concrete, 75% M250 concrete

+12mm long polypropylene fiber (600 gm/cum)

+ super plasticizer (0.3 to 0.9% by weight of

cement). Complete the process with shuttering

and curing, including all necessary materials and

labor. The work and adopted methodology shall

be executed in accordance with the Structural

Audit Report or as directed by the Engineer-in-

Charge, applicable to all floors.

Item Description of Item Quantity Unit Rate In Amount

120 Treatment I-1 400.00 Sqmt 1238.26

Repairing the existing surface with minor

waterproofing of RCC sunk, wet areas, tanks,

balconies, kitchens, and small roofs, the

contractor shall: clean the RCC slab surface and

walls using mechanical tools to remove dust, dirt,

and concrete layers; perform pressure grouting

at construction joints or honeycombs using a non-

shrink cementitious grout mixed with shrinkage

compensating admixture (SUNPLEX by M/s

Sunanda Speciality Coatings Pvt. Ltd. or

equivalent) in a 50 kg cement bag, and sufficient

water for flowability, grouted under pressure in

pre-drilled holes using a grouting pump; after

hours, cut the nipples and seal them; prepare

rough surfaces at beam-slab, slab-masonry, and

slab-column joints for vatta; fill the rough

surfaces with a 45-degree angle vatta using a

high dose acrylic polymer modified mortar

(PMM) made with POLYALK EP, cement, and

quartz sand in a 2:5:15 ratio (by M/s Sunanda

Specialty Coatings Pvt. Ltd. or equivalent);

conduct a hydrotest using the ponding method

for more than 48 hours on all treated surfaces

and repeat the pressure grouting step if leakage

is observed; prime the surface using an acrylic

primer (SUNPRIME by M/s Sunanda Specialty

Coatings Pvt. Ltd. or equivalent) at a coverage

rate of 8-10 sq. m/kg/coat and allow it to dry;

Item Description of Item Quantity Unit Rate In Amount

121 Treatment I-2 4938.00 Sqmt 961.52

Repairing the existing surface with Majore

waterproofing of RCC Slab, Terrace , roofs etc. the

contractor shall: clean the RCC slab surface and

walls using mechanical tools to remove dust, dirt,

and concrete layers; perform pressure grouting

at construction joints or honeycombs using a non-

shrink cementitious grout mixed with shrinkage

compensating admixture (SUNPLEX by M/s

Sunanda Speciality Coatings Pvt. Ltd. or

equivalent) in a 50 kg cement bag, and sufficient

water for flowability, grouted under pressure in

pre-drilled holes using a grouting pump; after

hours, cut the nipples and seal them; prepare

rough surfaces at beam-slab, slab-masonry, and

slab-column joints for vatta; fill the rough

surfaces with a 45-degree angle vatta using a

high dose acrylic polymer modified mortar

(PMM) made with POLYALK EP, cement, and

quartz sand in a 2:5:15 ratio (by M/s Sunanda

Specialty Coatings Pvt. Ltd. or equivalent);

conduct a hydrotest using the ponding method

for more than 48 hours on all treated surfaces

and repeat the pressure grouting step if leakage

is observed; prime the surface using an acrylic

primer (SUNPRIME by M/s Sunanda Specialty

Coatings Pvt. Ltd. or equivalent) at a coverage

rate of 8-10 sq. m/kg/coat and allow it to dry;

apply two coats of a single component, highly

122 Treatment M 706.00 Sqmt 717.10

Repairing the existing surface with polymer

treatment involves removing and scraping away

old deteriorated plaster of any thickness from

walls or RCC members. After plaster removal, the

surface should be cleaned with a water jet. A

bonding coat (Cement + SBR + Water + grouting

chemical powder) should then be applied.

Following this, apply a high-dose 15 mm thick

cement mortar (CM) 1:4 (using OPC-53 grade

cement) in a single coat of polymer plaster, with

the addition of 250 ml of SBR and 140 ml of

Super Plasticizer, and ensure proper curing. The

process also includes stacking serviceable

material and disposing of unserviceable material

from the site with all necessary leads and lifts.the

work and adopted methodology shall be

executed in accordance with the Structural Audit

Report or as directed by the Engineer-in-Charge,

applicable to all floors.

123 Excavation for foundation upto 1.50 mt depth 3680.00 cumt 123.13

including sorting out and stacking of useful

materials and disposing the excavated stuff

upto 50 mt lead (A) Loose or soft soil.

Item Description of Item Quantity Unit Rate In Amount

124 Filling available excavated earth (excluding rock) 2709.00 Cumt 136.92

in trenches. plinth, sides of foundations etc. in

layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming

125 Filling in plinth with sand under floors including 223.00 Cumt 481.80

watering ramming, consolidating and dressing

126 Providing and laying cement concrete 1:2:4 (1- 230.20 Cumt 3741.69

Cement : 2- coarse sand : 4- hand broken stone

aggregates 40 mmnominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

127 Providing and laying controlled cement concrete 285.00 Cumt 5317.55

M150 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (C) Plinth Slabs

128 Providing and laying controlled cement concrete 59.00 Cumt 6307.45

M.200 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in beam for GF Floor

129 Providing and laying controlled cement concrete 25.00 Cumt 4687.41

M-200 and curing complete including the cost of

form work but excluding the cost of

reinforcement for reinforced concrete work in

130 Boring holes 3.5 m deep in ordinary soil (for cast 96.00 No 1561.19

in situ piles) and getting out the soil and disposal

of the surplus excavated soil as directed within a

lead of 50 Meter for following diameter of

pipes.(iii) 300 mm

131 Providing and fixing Stainless steel Hand railing 20.00 Rmt 1831.13

made from anticorrocive 304 grade S S pipe of

mm dia (16Gauge) as hand rail with required

clamp for support and round ball at end

including baluster all rail portion and

accessories as per detailed drawing as directed

132 Removing, Repairing and Refixing existing 14.00 Nos 929.20

Alluminium door of all size shutter/frame,

replacing all old fixtures with new fixtures,

screws etc. including repairing the shutter/frame

with Rates includes all labour charges for

removing, repairing & refixing the door, all

materials, transport cost, taxes etc.and as

directed by engineer in charge etc complete.

Item Description of Item Quantity Unit Rate In Amount

133 Removing, Repairing and Refixing existing 10.00 Nos 696.90

Alluminium window frame with glass of all size

shutter/frame, replacing all old fixtures with new

locks, screws etc. including repairing the

shutter/frame with Rates includes all labour

charges for removing, repairing & refixing the

window, all materials, transport cost, taxes

etc.and as directed by engineer in charge etc

134 Removing, Repairing and Refixing existing 12.00 Nos 522.17

Alluminium fix ventilator frame with glass of all

size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the

shutter/frame with Rates includes all labour

charges for removing, repairing & refixing the

window, all materials, transport cost, taxes

etc.and as directed by engineer in charge etc

135 Supplying and fixing Plain Glass 5 mm thick in 22.00 Sqmt 729.22

aluminium frame of windows etc complete as per

directed by engineer in charge.

136 Painting two coats (excluding priming coat) on 1308.68 Sqmt 90.37

previously painted steel and other metal surface

with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt,

dust and other foreign matter.

137 Removing and refixing and new pre-cast Rubber 227.00 Sqmt 461.75

Dye inter locking concrete block 60mm thick

with grade of concrete M250 pnumatic

compressed by mechanically pressed and as per

approved design including 75mm Sand layer for

levelling and filling the joint with sand in proper

line and level etc complete.

138 Providing and fixing brass screw down stop 8.00 No 205.83

tap.(A) 15mm dia.

139 Providing and fixing Gun metal check or non- 28.00 No 420.63

return fullway wheel valve (A) 25mm dia.

140 Providing and fixing Gun metal check or non- 4.00 No 663.43

return fullway wheel valve (A) 40mm dia.

141 Providing and fixing screw down bib taps of 36.00 No 186.83

following size.(A) Brass screw down bib tap

polished bright. (i) 15mm dia.

142 Providing and laying machine-cut, free-edge, 128.00 sqmt 2842.14

machine-polished granite stone (18 mm thick)

for finished treads and risers, including 1 cm

projected nosing with rounded moulding in

treads, laid over 12 mm average thick cement

mortar 1:6 (1 cement : 6 coarse sand) for treads

and 10 mm average thick cement mortar 1:3 (1

cement : 3 coarse sand) for risers; jointed with

grey or coloured cement slurry, including

rubbing, polishing, and making three grooves of

size 3 mm × 3 mm along the length of each tread,

complete in all respects.

Item Description of Item Quantity Unit Rate In Amount

143 Constructing drinking/Handwash Platform of 4.00 sqmt 16529.66

18 mm thick Polished Black Granite having

0.45m width and 0.60m height including 0.60m

support at every 0.7m c/c with cementing

Materials / adhsives including makeing

necessary grooves in walls including Bib Tap

,Dedo Tile including Polyamide braided

connection pipe 12mm dia, 450mm length with

all fitting inlet and outlet connection and all

required fitting accessories etc. with all labour

material of approved quality incl. chamfered

edge finished front edge granite strip of one side

polished and jointed with grey cement slurry

including rubbing and polishing etc. complete

144 Providing and fixing in position collapsible steel 324.00 Kg 61.58

shutters with vertical channels 20 x 10 x 2 mm

braced with flat iron diagonals 20 x 5 mm size

with top and bottom rails of T_rin 40x 40 x 6 mm

with 38mm dia, steel pulleys complete with bolts,

nuts, locking arrangements, stoppers handles

including applying a priming coat of red lead

145 Providing and laying chequered terrazo tiles 876.00 sqmt 918.66

22mm thick with marble chips of sizes upto 6mm

in floors on 25mm thick bed of Lime mortar 1:1.5

(1-Lime putty : 1.5 coarse sand) or C.M. 1:6 (1 -

cement :6 - coarse sand) jointed with neat

cement slurry mixed with pigment to match the

shade of the tiles including rubbing and polishing

complete. (A) Light shades using white cement

146 Providing and fixing to wall ceiling and floor 10.0 692.00 Rmt 339.05

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete

with special falnge compression type fittings,

wall clipsetc. including making good the wall

ceiling and floor.(G)110 mm

147 Providing and fixing to wall ceiling and floor 10.0 400.00 Rmt 696.90

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy, complete

with special falnge compression type fittings,

wall clipsetc. including making good the wall

ceiling and floor.(G)160 mm

Item Description of Item Quantity Unit Rate In Amount

148 Providing junction for rain water juncton 16.00 Nos. 9262.71

chamber of size 0.60x0.60x0.75m with

excavation of size 1.96x1.96 m & 0.15m thick

c.c.1:2:4 bed concrete including brick masonary

wall in CM 1:6 of 0.75m height & 0.23m thick

with 15mm thick cement plaster inside & outside

& 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m

with CRS steel and 0.60mx0.45m cast iron

manhole cover with frame weight not less than

35 kg as per directed by Engineer-in-charge

149 Providing and installation Recharge pit of 2.00 Nos. 109645.60

“RAIWOHA” Make 3 layer RCC Precast Injection

well system of size 1.5 meter Dia. X 3.4 Meter

Height rein forced concrete precast three layer

module with 6” dia x 12” dia. V wire screen of

0.75mm x 1.0 mm Slot size in SS 304 material

and 1.0 meter height with MS Top cover and

required Air vent including all necessary

excavation and transportation at site including

required filter media for the recharge system as

per site requirement.

150 Drilling of min. 250 mm dia. bore hole in all 60.00 Rmt 1138.27

strata including dualover burden strata by

combination DR/DTH rig including lowering

mm dia MS ERW pipes in bore hole and testing

etc.all work as per directed engineer incharge.

151 Supplying slotted PVC pipes of approved quality 60.00 Rmt 555.50

at site of work confirming to IS. 1239/1974

152 Cleaning & maintenance of system Including all 2.00 Nos 4646.00

Labour and replacing of Filter Media as Required

153 Supply. installation, testing &commissioning of 2.00 No 98424.50

ISI approved electrical motor driven jockey

pump set having 10.8 m3/hr. @ 70m head.The

pump unit shall be a horizontally direct mounted

motor. Unit shall comprise the following

minimum requirements: a)Pump, b) Electric

motor IE2, c) Foundation bolts, d) Mating flanges

with gasket and fasteners, e) Discharge gauges,

etc.complete in all respect, with labour.

154 Supply, installation, testing &commissioning of 2.00 No 25674.20

Priming tank, HDPE type, 1000 litres, with

necessary piping 100 mm size, G.I pipe for

priming the pumps, pipe of with butterfly valves

for isolation, Water Filling to priming tank by

piping min. 50 mm size, with all complete.

Item Description of Item Quantity Unit Rate In Amount

155 Supply, installation, testing &commissioning of 2.00 No 55630.80

Manifold( surge vessel,)for fire hydrant system,

min.300 mm diameter,made from M.S

plate,hydro tested to 15 kg./cm2. with ball

valves,header with couplings for fitting pressure

switches,pressure gauges etc.with necessary

isolation valves with all complete.

156 Supply, fabrication & erection of aboveground 26.00 Mtr 393.90

G.I. 'C'-Class, ERW piping,conforming to IS:1239,

part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness.

G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 25 mm

157 Supply, fabrication & erection of aboveground 50.00 Mtr 636.30

G.I. 'C'-Class, ERW piping, conforming to IS:1239,

part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness.

G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 50 mm

Item Description of Item Quantity Unit Rate In Amount

158 Supply, fabrication & erection of aboveground 60.00 Mtr 1171.60

G.I. 'C'-Class, ERW piping, conforming to IS:1239,

part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness.

G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 80 mm

159 Supply, fabrication & erection of aboveground 440.00 Mtr 1686.70

G.I. 'C'-Class, ERW piping, conforming to IS:1239,

part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness.

G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 100 mm

160 Supply, fabrication & erection of aboveground 60.00 Mtr 2525.00

G.I. 'C'-Class, ERW piping, conforming to IS:1239,

part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness.

G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 150 mm

Item Description of Item Quantity Unit Rate In Amount

161 Supply, fabrication & erection of aboveground 60.00 Mtr 3413.80

G.I. 'C'-Class, ERW piping, conforming to IS:1239,

part-I, Heavy class up to 150 mm dia. and

IS:3589, for size 200 mm dia. & above, thickness.

G.I. pipe fitting's as per IS: 1239, part-II, Heavy

class for size 150 mm dia. & below & IS: 3589, for

size 200 mm dia. above, flanges, nuts bolts &

washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of

the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe

support, shall be two coat of zinc primer and two

coats of fire red conf. to IS: 5, Shade

Complete with all accessories as per approved

drawings, specicification and direction of the

Engineer-in-Charge, with all complete.200 mm

162 Supply, installtion, testing & commissioing of 20.00 Mtr 2020.00

Underground GI (ERW) piping conforming to

IS:1239, part-I, Heavy class ('C' class) up to

mm dia. and IS:3589 Heavy class ('C' class), for

200 mm dia. & above, min. 6.35mm thickness

including Heavy class fittings, anti-corrosive tape

of size 150 mm wide x 4 mm thick, wrapping &

coating with 13KV holiday testing . Rates shall

include sand bedding of 75mm dia all around,

backfilling of the excavated including installation

of heavy pipe fitting's, flanges, etc. 10 % of all the

welded joints shall be done radiographically

tested and 50% of the joints radiographed shall

be the "Field Joints". Hydrostatic testing for

hours at 150% of the system pressure, hook-up

etc., complete with all accessories as per

approved drawings, specicification and direction

of the Engineer-in-Charge, with all complete.

(Road Crossing) 100 mm dia.

Item Description of Item Quantity Unit Rate In Amount

163 Supply, installtion, testing & commissioing of 20.00 Mtr 3040.10

Underground GI (ERW) piping conforming to

IS:1239, part-I, Heavy class ('C' class) up to

mm dia. and IS:3589 Heavy class ('C' class), for

200 mm dia. & above, min. 6.35mm thickness

including Heavy class fittings, anti-corrosive tape

of size 150 mm wide x 4 mm thick, wrapping &

coating with 13KV holiday testing . Rates shall

include sand bedding of 75mm dia all around,

backfilling of the excavated including installation

of heavy pipe fitting's, flanges, etc. 10 % of all the

welded joints shall be done radiographically

tested and 50% of the joints radiographed shall

be the "Field Joints". Hydrostatic testing for

hours at 150% of the system pressure, hook-up

etc., complete with all accessories as per

approved drawings, specicification and direction

of the Engineer-in-Charge, with all complete.

(Road Crossing) 150 mm dia.

164 Design , Supply and installation of Safety Signage 28800.00 Sq. inch 9.09

made of Zinc Sulphilde based glow in dark , Rigid

sheet with High Luminous property enclosed in a

transperent weather proof UV stabilized plastic

pasted on 3 mm thick clear acrylic sheet such as

EXITS, EMERGENCY EXIT, DO NOT USE LIFT

DURING FIRE, FLOOR MARKINGS, FIRE LIFT,

STAIRCASE EXIT, FIRE ALARM CALL POINT, FIRE

HOSE REEL, FIRE HYDRANT POINT etc.

165 Supply, Installtion, Testing & Commissioing of 2.00 No 555.50

Standard Response Sprinkler, Pendent Brass

Sprinkler, Quartzoid Bulb type with crome finish,

nickel crome platde, K factor K-80, Temp.- 680C,

1/2" end connection including resessed

escutcheon. (UL Listed).

166 Supply, installation, testing & commissioning of 4.00 No 2817.90

pressure switch. (Range 0 to 16 kg/cm2)

167 Supply, installation, testing & commissioning of 8.00 No 2737.10

150 mm dia. dial Burdon Type Glycerine Filled

pressure gauge with isolation ball valve

arrangements with necessary isolation valves

with all complete.( Range 0 to 15 kg/cm2)

168 Supply, installation, testing & commissioning of 2.00 No 5898.40

Cast iron body double flanged gate valve With

Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with

mating flanges, galvanized nut, bolts & washers,

gasket 3 mm thick, etc., with all complete. 50 mm

Item Description of Item Quantity Unit Rate In Amount

169 Supply, installation, testing & commissioning of 2.00 No 8181.00

Cast iron body double flanged gate valve With

Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with

mating flanges, galvanized nut, bolts & washers,

gasket 3 mm thick, etc., with all complete. 80 mm

170 Supply, installation, testing & commissioning of 2.00 No 10261.60

Cast iron body double flanged gate valve With

Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with

mating flanges, galvanized nut, bolts & washers,

gasket 3 mm thick, etc., with all complete.

171 Supply, installation, testing & commissioning of 2.00 No 15917.60

Cast iron body double flanged gate valve With

Rising Spinldle conf. to IS: 14846, PN-1.6 with

mating flanges, drilling as per IS/ANSI 150# with

mating flanges, galvanized nut, bolts & washers,

gasket 3 mm thick, etc., with all complete.

172 Supply, Installation, Testing & Commissioning of 8.00 No 2009.90

Cast iron body Butterfly valve according to IS:

13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia.

Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers,

rubber gaskets 3 mm thick, etc., with all

complete. 50 mm dia.

173 Supply, Installation, Testing & Commissioning of 2.00 No 2565.40

Cast iron body Butterfly valve according to IS:

13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia.

Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers,

rubber gaskets 3 mm thick, etc., with all

complete. 80 mm dia.

174 Supply, Installation, Testing & Commissioning of 4.00 No 3120.90

Cast iron body Butterfly valve according to IS:

13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia.

Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers,

rubber gaskets 3 mm thick, etc., with all

complete. 100 mm dia.

Item Description of Item Quantity Unit Rate In Amount

175 Supply, Installation, Testing & Commissioning of 2.00 No 4484.40

Cast iron body Butterfly valve according to IS:

13095, PN-1.6, Iron Disc for size 150 mm dia. &

below Lever operated and above 150 mm dia.

Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers,

rubber gaskets 3 mm thick, etc., with all

complete. 150 mm dia.

176 Supply, installation, testing & commissioning of 2.00 No 1535.20

Cast iron body Dual Plate Wafer Type NRV conf.

to IS: 210, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets

mm thick, etc., with all complete Accessories

177 Supply, installation, testing & commissioning of 2.00 No 2222.00

Cast iron body Dual Plate Wafer Type NRV conf.

to IS: 210, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets

mm thick, etc., with all complete Accessories

178 Supply, installation, testing & commissioning of 2.00 No 3161.30

Cast iron body Dual Plate Wafer Type NRV conf.

to IS: 210, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets

mm thick, etc., with all complete Accessories

179 Supply, installation, testing & commissioning of 2.00 No 5817.60

Cast iron body Dual Plate Wafer Type NRV conf.

to IS: 210, PN-1.6 complete with mating Flanges

class # 150 with bolts & nuts, washers, gaskets

mm thick, etc., with all complete Accessories

180 Supply, installation, testing & commissioning of 2.00 No 1111.00

SG iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers,

gaskets 3 mm thick, etc., with all complete.

Accessories 50 mm dia.

181 Supply, installation, testing & commissioning of 2.00 No 1454.40

SG iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers,

gaskets 3 mm thick, etc., with all complete.

Accessories 80 mm dia.

182 Supply, installation, testing & commissioning of 2.00 No 1787.70

SG iron body SinglePlate Wafer Type NRV conf. to

ASTMA 536, PN-1.6 complete with mating

Flanges class # 150 with bolts & nuts, washers,

gaskets 3 mm thick, etc., with all complete.

Accessories 100 mm dia.

183 Supply, installation, testing & commissioning of 2.00 No 5555.00

Y Type Strainer complete with mating flanges

with bolts & nuts, washers, gaskets 3 mm thick,

etc., with all complete accessories. 80 mm dia.

Item Description of Item Quantity Unit Rate In Amount

184 Supply, installation, testing & commissioning of 2.00 No 7272.00

Y Type Strainer complete with mating flanges

with bolts & nuts, washers, gaskets 3 mm thick,

etc., with all complete accessories. 100 mm dia.

185 Supply, installation, testing & commissioning of 2.00 No 11554.40

Y Type Strainer complete with mating flanges

with bolts & nuts, washers, gaskets 3 mm thick,

etc., with all complete accessories. 150 mm dia.

186 Supply, installing, testing and commissioning of 2.00 No 4191.50

Normax make CI heavy duty ball type foot valve

with flanges, nut bolts, gaskets etc. with

necessary complete accessories. 80 mm dia.

187 Supply, installing, testing and commissioning of 2.00 No 6161.00

Normax make CI heavy duty ball type foot valve

with flanges, nut bolts, gaskets etc. with

necessary complete accessories. 100 mm dia.

188 Supply, installing, testing and commissioning of 2.00 No 12402.80

Normax make CI heavy duty ball type foot valve

with flanges, nut bolts, gaskets etc. with

necessary complete accessories. 150 mm dia.

189 Supply, installation, testing & commissioning of 2.00 No 8978.90

Four way fire brigade Inlet connection with

mm dia. stainless steel (SS304) instantaneous

male inlets with built in non return valve in each

inlet with 150 mm dia. header pipe, suitable

rubber cap and GI chain including nuts, bolts,

washers, gasket 3 mm thick, etc. with all

190 Supply, installation, testing & commissioning of 2.00 No 5130.80

Two way fire brigade Inlet connection with

mm dia. stainless steel (SS304) instantaneous

male inlets with built in non return valve in each

inlet with 100 mm dia. header pipe, suitable

rubber cap and GI chain including nuts, bolts,

washers, gasket 3 mm thick, etc. with all

191 Supplying FIRE bucket round bottom of 9 liters 16.00 No 1020.10

capacity made out of 24 gauge G.I Sheet with

extra handle at bottom duly painted white inside

and Red out side with FIRE mark. Filled with dry-

sand and kept on existing stand provided or hung

192 Supplying and erecting floor mounting Stand for 4.00 No 5555.00

keeping four nos. of FIRE buckets comprising

1500 mm in length, 900 mm height frame made

out of 30mm x 30 mm x 4 mm angle iron with

cross supports legs, welded with 4 hooks and

duly painted with one coat of primer and two

coats of approved enamel P O red paint.

Item Description of Item Quantity Unit Rate In Amount

193 Supply & installation of stainless steel body 12.00 No 1060.50

Orifice Plate of suitable inner bore along with

matching flange - as per specification &

requirement as per hydraulic calculation.

194 Providing and fixing approved make Perforated C 2.00 Mtr 464.60

type cable tray. Made from pre- galvanized

sheet steel. The cable tray should be bended as

per IS 2062/1079 . with max 17.5% perforation

with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erected on

existing support as per Specification and as per

instruction of engineer in charge..(5) 300 X 50 X

195 Providing and fixing approved make Perforated C 2.00 Mtr 313.10

type cable tray. Made from pre- galvanized

sheet steel. The cable tray should be bended as

per IS 2062/1079 . with max 17.5% perforation

with coupler plate / Fish plate and GI hardware

like nut - bolt and washers etc. erected on

existing support as per Specification and as per

instruction of engineer in charge..(3) 150 X 50 X

196 Supply, installation, testing & commissioning of 12.00 No 5433.80

Oblique pattern type stainless steel (SS 304)

single headed External Fire Hydrant Valve with

63 mm dia. female instantaneous outlet conf. to

IS: 5290, type - A, including mating flanges,

galvanised nuts, galvanised bolts/studs, washers

& gaskets 3 mm thick with all complete.

197 Supply, installation, testing & commissioning of 12.00 No 1747.30

63 mm dia. stainless steel (SS 304) Universal

Branch Pipe conf. to IS:

198 Supply & installation, testing & commissioing of 12.00 No 6958.90

Fire Fighting Hose - conf. to IS : 636, type B (type-

3), The fire hose shall be 15 m long with 63 mm

dia. stainless steel (SS 304) couplings conf. to IS:

903, at both the ends for connection with the

hydrant valve and the branch pipe.

199 Supply, installation, testing & commissioning of 12.00 No 2525.00

fabricated from 3 mm MS sheet, hose box of size-

450 mm x 600 mm x 250 mm - painted with Fire

Red as per IS: 5, shade no. 536 front 3 mm thick

transparent glass with lock & key, handle and

brass hinges - to accommodate one number of

mtr long hose and one number of universal

branch pipe, including supporting arrangement

with civil work.

Item Description of Item Quantity Unit Rate In Amount

200 Supply, Installation, testing & commissioing of 24.00 No 7403.30

Swinging type mild steel hose reel drum with

mm dia. x 30 mtr. rubber hose as per IS: 884. The

mounting stand shall be of mild steel and the

hose shall be fitted with a SS shut-off nozzle & SS

ball valve of 25 mm dia. including supporting

arrangement with all complete. accessories

201 Supplying, fixing & testing of of CI ball Valve 44.00 No 696.90

25mm dia. (Thread)

202 Supplying, fixing & testing of New Battery of 2.00 No 15826.70

diesel engine 150 Amp.

203 Supply and installation of Diesel Tank For Diesel 2.00 No 16685.20

Engine With All Accessories 100 Ltrs.

204 Supplying, filling & testing lube oil for diesel 2.00 Ltrs 313.10

205 Supply and commissioning of Oil Filter. 2.00 No 696.90

206 Supplying, filling of diesel in diesel engine tank 20.00 Ltrs 89.87

207 Supply and commissioning of Diesel Filter 2.00 No 427.97

208 Supplying, filling & testing coolant to engine 20.00 Ltrs 239.66

cooling for radiator

209 Filling Of Gaps Between pipe and Core Cutting 102.00 No 299.58

Hole With Chemical and Cement

210 Supplying & erecting XLPE(IS:7098)(I)-88 ISI 60.00 Mtr 136.35

unarmoured copper cable 1.1 KV grade to be

erected as directed of following size. (E) 3 core

2.5 Sq. mm for pressure switch

211 Providing and erecting XLPE(IS:7098)(I)-88 ISI 60.00 Mtr 285.83

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (B) 3 core 4 Sq. mm

212 Providing and erecting XLPE(IS:7098)(I)-88 ISI 80.00 Mtr 497.93

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (D) 3 core 10 Sq. mm

(Only Fire Panel to Fire Pump)

213 Providing and erecting XLPE(IS:7098)(I)-88 ISI 80.00 Mtr 213.11

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe at road

crossing or floor of following size of cable for

Diesel Engine Battery Charger (A) 3 core 2.5Sq.

214 Supply, Filling and Fixing of approved make ABC 24.00 No 1959.40

type fire extinguisher - 6 Kg. Capacity as per

215 Supply, Filling and Fixing of approved make CO2 24.00 No 5514.60

type fire extinguisher. Capacity 4.5 Kg.

(conforming to IS-15683).

Item Description of Item Quantity Unit Rate In Amount

216 Supply, Filling and Fixing of approved make ABC 6.00 No 3413.80

Moduler type automatic fire extinguisher.

Capacity 5 Kg. (conforming to IS-15683).

217 Submitting the application to obtain Fire Plan 2.00 No 252500.00

Approval and After Completion of Work Obtain

Final Fire NOC for 3 Year.

218 Supply, Installation and commissioning of Air 4.00 No 1403.90

Release Valve, 25 mm Dia. connection.

219 Supply, Installation and commissioning of Fire 4.00 No 21391.80

Alarm Panel Conventional type, 4 zone, with

complete accessories.

220 Supply, Installation and commissioning of smoke 60.00 No 1020.10

detectors / heat detectors, with complete

221 Supply, Installation and commissioning of plug in 60.00 No 252.50

base for the smoke detectors, hooters, with

complete accessories.

222 Supply, Installation and commissioning of Audio 24.00 No 1060.50

hooters , with complete accessories.

223 Supply, Installation and commissioning of 24.00 No 1010.00

Manual Call Points, with complete accessories.

224 Providing and erecting XLPE(IS:7098)(I)-88 ISI 2200.00 Mtr 176.75

armoured cable multistrand Copper conductor

for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following

size of cables (A) 2 core 2.5 Sq. mm for Fire

225 Core cutting in wall and in RCC slab with size as 30.00 No 333.30

below: 50 mm dia. Hole

226 Core cutting in wall and in RCC slab with size as 30.00 No 424.20

below: 80 mm dia. Hole

227 Core cutting in wall and in RCC slab with size as 20.00 No 505.00

below: 100 mm dia. Hole

228 Core cutting in wall and in RCC slab with size as 16.00 No 595.90

below: 150 mm dia. Hole

229 Core cutting in wall and in RCC slab with size as 6.00 No 848.40

below: 200 mm dia.

230 Supply, installation, testing & commissioning of 2.00 Set 176750.00

ISI approved electrical motor operated Kirloskar

make fire hydrant main pump set horizontal end

suction back pull out top discharge centrifugal

fire pump set with all the standard acessories,

base frame, coupling, and foundation bolts with

following specifications Model -DB 80/26,

Flow-97 m3/hr,Head-70 meter,Motor Rating -

30KW/40HP/3 ph, Suc x Del - 80 x

Item Description of Item Quantity Unit Rate In Amount

231 Supplying, Installation, Testing and 2.00 Set 388850.00

commissioning of Kirloskar make diesel engine

driven fire hydrant pump set suitable for

automatic operation and consisting of following:

horizontal type, centrifugal end suction back pull

out, top discharge pump of cast iron body &

bronze impeller with m.s.fabricated common

base plate, coupling, coupling guard, foundation

bolts etc.,as required. Model -KFE Flow-97

m3/hr,Head-70 meter, Engine - 39 HP / 3 ph Suc

232 Fire Hydrant Panel suitable for 10 hp Jockey 2.00 No 101000.00

pump, 40 hp (97 m3/hr @ 70 m head) main

electrical pump and 39 hp (97 m3/hr @ 70 m

head) Diesel engine operated pump

A) Incomer MCCB - 1 Nos R Y B Indication - 1 Set

VAF Digital Meter - 1 Set B) Outgoing F1

HP Star Delta Starter - 1 For Main pump F2

HP DOL Starter - 1 For Jockey Pump F3 Auto - On

/ Off Diesel Pump With Battery Charger Control

Circuit With Auto - Manual On/Off On/Off Trip

Indication On/Off Push Button C) Fabrication

Dully Powder Coated PO Red Colour,Fabricated

From 14/16 SWG,GI Sheet , IP-42 Protection,-

Fixed Type Floor Mounted

Cable Entry : Bottom

233 Pay Legal Fees to Concern Authority for 5200.00 Sq.mt 15.15

Obtaining Plan Approval and Final NOC

234 Box cutting the road surface to proper slope and 16.00 Cum. 109.41

camber for making a base for road work

including removing the excavated stuff and

depositing on the road side slope as directed

upto 50Mt.lead.

235 Construction of granular sub-base 150 mm thick 15.20 Cum. 1000.91

by providing coarse graded machine crushed B.T.

material satisfying MOST specification of grading

I (B.T. stone aggregate 53 mm to 26.5 mm 35 %,

26.5 to 4.75 mm - 45 % and 2.36 mm below -

% )including spreading in uniform layer with

motor grader on prepared surface, mixing by mix

in place method with rotavator at OMC and

compacting with vibratory roller to achieve the

desired density etc. complete.

236 Providing and laying wet mix macadam base 12.00 Cum. 1111.00

course 250 mm thick in two layers using machine

crushed B.T. chips as per required gradation

mixing with required optimum quantity of water,

conveying the mix to site of work, spreading in to

grade and camber with mechanical paver and

consolidation each layer with vibratory roller

including cost of material labour plant and

equipment etc. complete.

Item Description of Item Quantity Unit Rate In Amount

237 Providing and laying controlled cement concrete 16.00 Cum 4562.17

M250 and curing complete including the cost of

formwork and excluding reinforcement for

reinforced concrete work in (A) Foundations,

footings and Mass concrete.

238 Compaction and finishing of cement concrete 76.00 Sqm 63.63

road by trimix M.250 process providing extra

Labour charges for the trimix vacume dewatering

service process on cement concrete road sutface

by using vacuum dewatering pump floater

surface vibrator including making groves and

rough finish to surface including leveling etc

239 Providing and fixing precast concrete kerb stone 24.00 Rmt 374.92

of gray cement based concrete block 30 cm

length, 30 cm height and 15 cm thick of M250

grade of concrete as per approved design and

including excavation for fixing in proper line and

level, filling joints with CM 1:3( 1 cement : 3 fine

sand ) etc complete.

240 Point wiring for Light / Bell with 2-1.5 sq.mm 750.00 Pt. 485.81

& earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in

below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base

frame covered with textured/ metallic/ white

front plate modules erected on / in wall / ceiling

as per pipe erected, with necessary Lamp holder/

ceiling rose / H.D.Connector as directed. (f) with

medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat.

III (New-255, Old-120)

Item Description of Item Quantity Unit Rate In Amount

241 Point wiring for FAN with 2-1.5 sq.mm & earth 300.00 Pt. 674.68

wire of 1.5 sq.mm (Green) both are of .ISI marked

1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type

of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan

regulator mounted and accessories with earth

continuity of following type erected on PVC /

Metallic/ Wooden box, single mounting base

frame covered with textured/metallic/white

front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed. (f) with medium class

Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III (New-255, Old-

242 Point wiring for on board Looped Plug with 6A 160.00 Pt. 257.55

Modular type switch & 5 pin socket erected on

PVC/ Metallic/ Wooden box, single mounting

base frame covered with textured / metallic/

white front plate modules erected on/ in wall/

ceiling with following type accessories Cat. III

(New-255, Old-120)

243 Providing following type of Modular Type 232.00 Nos 151.50

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (1)One No. SP 6 Amp. Cat.III

(New-255, Old-120)

244 Providing following type of Modular Type 232.00 Nos 151.50

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (2) One No 5 pin plug Cat.III

(New-255, Old-120)

245 Providing following type of Modular Type 104.00 Nos 160.59

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (8) Computer RJ-45 socket

Item Description of Item Quantity Unit Rate In Amount

246 Providing following type of Modular Type 196.00 Nos 180.79

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (9) 16 Amp. SP one way

247 Providing following type of Modular Type 196.00 Nos 199.98

Accessories mounted with PVC /

metallic/Wooden box, single mounting base

frame covered with textured / metallic/white

front plate , modules erected with necessary

connections as per site situation directed by

Engineer In charge. (10) 6/16Amp. Universal

248 Providing and erecting ISI mark Medium class 3208.00 Mtr. 24.24

RIGID PVC PIPES of following size complete to be

erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed

with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed

249 Providing and erecting Mains with 1.1 KV grade 3888.00 Mtr. 82.82

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth

continuity of following size (A) With medium

class Rigid PVC pipe and accessories (b) 2 wire

250 Providing and erecting Mains with 1.1 KV grade 5850.00 Mtr. 112.11

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (a) 2 wire 4 sq. mm

251 Providing and erecting Mains with 1.1 KV grade 240.00 Mtr. 147.46

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (b) 2 wire 6 sq. mm

Item Description of Item Quantity Unit Rate In Amount

252 Providing and erecting Mains with 1.1 KV grade 1900.00 Mtr. 180.79

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (g) 4 wire 4 sq. mm

253 Providing and erecting Mains with 1.1 KV grade 1330.00 Mtr. 260.58

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC

pipe and accessories (h) 4 wire 6 sq. mm

254 Providing and erecting Mains with ISI marked, 288.00 Mtr. 56.56

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (e) One

wire 6.00 sq. mm

255 Providing and erecting Mains with ISI marked, 396.00 Mtr. 91.91

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (f) One

wire 10.00 sq. mm

256 Providing and erecting Mains with ISI marked, 72.00 Mtr. 142.41

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (g) One

wire 16.00 sq. mm

Item Description of Item Quantity Unit Rate In Amount

257 Providing and erecting Mains with ISI marked, 30.00 Mtr. 300.98

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (i) One

wire 35.00 sq. mm

258 Providing and erecting Mains with ISI marked, 24.00 Mtr. 470.66

1.5KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC

insulated conforms to IS 694, IEC - 227 erected in

existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor

starters & control wiring) with required size of

copper lugs, nuts and bolts if required. (j) One

wire 50.00 sq. mm

259 Supplying and erecting Flexible PVC insulated 360.00 Mtr. 77.77

multi strand multi core 1.1 kv grade ISI marked

copper wires of following size to be erected as

directed. (h) 2.50 Sq.mm 3 core round PVC

260 Supplying & erecting approved make LAN cable 3120.00 Mtr. 47.47

of following size in existing pipe as per direction

261 Providing & erecting Switch board for Computer 104.00 Nos. 1133.22

or electric apparatus consisting of following

modular type accessories mounted with PVC/

Metallic concealed/ open box with single

mounting base frame covered with textured/

metallic/ white front plate,modules erected with

necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories

Item Description of Item Quantity Unit Rate In Amount

262 Supplying and erecting LED indoor fittings with 568.00 Nos. 535.30

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/ CRCA/ aluminium die cast

powder coated and high U.V. & corrosion

resistance with diffuser with company

mark/name 160V to 270V, Power Factor more

than 0.95, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/ watt, LED driver

efficiency > 85 % (fitting required LM-79 & LM-

80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Tube Light with integral driver (v) 36-40 Watts,

Surge-2 KV, IP-20, conventional 4 feet Cat.III

(New-224, Old-60)

263 Supplying and erecting led lamps with following 52.00 Nos. 112.11

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting

suitable for E14 / E27 / B22 lamp holders, pf >=

0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (ii) 5 to 8 watts Cat-

264 Supplying and erecting LED indoor fittings with 286.00 Nos. 1794.77

LEDs of wattage 0.2 Watt to 0.5 Watt assembled

on single MCPCB, with housing used as a heat

sink shall be made of thick sheet Steel

conforming to IS: 513/ CRCA/ aluminium

pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in

aluminium casted body with company mark/

name 160V to 270V, Power Factor more than

Luminaire efficacy> 85 lumens/watt, LED driver

efficiency > 85 % (fitting required LM-79 & LM-

80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (B)

LED Panel Light with provision for Plane front

frame with translucent cover fixed to housing

complete.IP20 (vi) 36 watts, 24" x 24", Surge-

Item Description of Item Quantity Unit Rate In Amount

265 Supplying and erecting LED street light / Flood 20.00 Nos. 4997.48

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency

> 85 %. (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.) (A)

Street Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (ii) above 48 to

Watts Cat.III (New-05, Old-05)

266 Supplying and erecting LED street light / Flood 26.00 Nos. 7266.95

light fittings with High power White LEDs

wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and

corrosion free High pressure die cast aluminum

housing with smooth finish powder coated and

heat sink extruded aluminium with diffuser and

Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or

embossed 160 to 270 V,Power Factor more than

5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency

> 85 %. (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge protection -4KV

integral and ,Light must have 440VAC line supply

with over-voltage protection. (iv) above 90 to

120 watts Cat.III

Item Description of Item Quantity Unit Rate In Amount

267 Providing and erecting Approved make Four 4.00 Nos. 6173.12

pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having

normal current rating up to 25 A to 100A. with

Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

268 Providing and erecting Approved make Four pole 24.00 Nos. 16221.61

moulded case circuit breaker having breaking

capacity ICU of 35 KA. at 415 V. having Normal

current rating 200A.with variable Thermal &

magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader

tinned copper & complete erected in existing

G.M.S.housing ICS=100% of ICU only

269 Providing and erecting Approved make Four 10.00 Nos. 20946.39

pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. and above at

V . having normal current rating 250A. with

variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III (New-03, Old-02)

270 Providing and erecting Approved make Four 4.00 Nos. 25228.79

pole moulded case circuit breaker having

breaking capacity ICU of 50 KA and above at

V having Normal current rating 400A. with

variable Thermal & magnetic release suitable to

work on A.C.supply 50 c/s. With all internal

connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

271 Providing and erecting Approved make Earth 2.00 Nos. 5415.62

fault Relay suitable to mount with inter

connection suitable to following size of moulded

case circuit breaker having CT ratio & MCCB

rating as following along with shunt trip 220V

AC. with all internal connections & complete

erected in existing M.S.housing.. (3) 250 A -400

A , CT Ratio 1/400

272 Supplying & erecting approved make Four Pole 4.00 Nos. 22255.35

415V change over switch interior for panel

mounting with operating mechanism A.C.23 duty

confirming to IS for (F)400A Cat.II

Item Description of Item Quantity Unit Rate In Amount

273 Supplying and erecting triple pole & neutral 6.00 Rmt 1961.42

440V /500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm

(Rated current /cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (A) Suitable for 100 Amp. Capacity

274 Supplying and erecting triple pole & neutral 3.00 Rmt 3202.71

440V /500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm

(Rated current /cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (B) Suitable for 200 Amp. capacity

275 Supplying and erecting triple pole & neutral 6.00 Rmt 7319.47

440V /500V panel mounting Copper Busbars

with four equal Nos. of electrolyte bus having

current density not more than 1.6 Amp. / sq.mm

(Rated current /cross section area) duly

wrapped with colour insulating tape for phase

sequence of following current carrying capacity,

erected with necessary bus bar supports

/insulators, main cable socket to each bar,

erected in existing cubical panel with necessary

connections. (D) Suitable for 400 Amp. capacity

276 Providing and erecting Miniature circuit breaker 26.00 Nos. 270.68

single pole 0.5A to 2A system and having

breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

277 Providing and erecting Miniature circuit breaker 700.00 Nos. 112.11

single pole 6A to 25A suitable to operate on

V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark Cat.III (New-280, Old-

278 Providing & erecting 240 V MCB double pole 170.00 Nos. 330.27

switch for motor & inductive load (C Curve)

having 10 KA breaking capacity & confirms to IS :

8828 in existing box having following capacity

(B) 40 Amp. Cat.III (New-60, Old-25)

Item Description of Item Quantity Unit Rate In Amount

279 Providing & erecting 415 V MCB Four Pole for 44.00 Nos. 668.62

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (b)40

Amp. Cat.III (New-14, Old-08)

280 Providing & erecting 415 V MCB Four Pole for 194.00 Nos. 737.30

Motor & Inductive Load (C Curve) having 10KA

breaking capacity & confirms to IS :8828 in

existing box having following capacity (c)63

281 Sheets steel powder coated enclosure suitable for 72.00 Nos. 176.75

incorporating One/Two nos. MCB.

282 Providing and erecting Sheet Steel powder 6.00 Nos. 1492.78

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A)

single phase incoming and horizontal single

phase outgoing (b) sheet steel double door (IP-

283 Providing and erecting Sheet Steel powder 38.00 Nos. 2913.85

coated MCB distribution board - flush / surface

mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (B)

three phase incoming and single phase horizontal

type outgoing Per phase isolation type (PPI) (b)

sheet steel double door (ii)6 way (New-09, Old-

284 Providing and erecting Approved make RCCBs 140.00 Nos. 2235.13

conforming to IS: 12640 and having sensitivity of

30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase

240 V,50Hz. having characteristic of quick action

& tripping with all advance feature & do not

incorporate any electronic component. for

following Max. rating erected as directed (ii)

40Amps. DP Cat. III

285 Providing and erecting Annealed bare Copper 170.00 Kg. 794.87

wire 8 to 16 SWG.

286 Providing and erecting Pipe type earthing having 12.00 Nos. 368.65

150 cms.long and 2.5 cms. dia. galvanised iron

pipe with coupling and buch buried in specially

prepared earth pit complete with necessary

SWG earth wire.

287 For using salt and charcoal / coke as required for 12.00 Nos. 171.70

pipe type earthing.

Item Description of Item Quantity Unit Rate In Amount

288 Supplying & erecting earth pit of minimum bore 22.00 Nos. 4591.46

dia.150mm size approved make Earthing

Electrode consisting Pipe-in-Pipe Technology as

per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm

having 80-200 Micron galvanising, Inner pipe dia

of 25 mm having 200-250 Micron galvanising,

connection terminal dia of 12mm with constant

ohmic value surrounded by highly conductive

compound with high charge dissipation suitable

for following type of applications with chamber

and heavy duty cover. (A)(approved make OEM

has to submit test certificate including value of

earth resistance of installation duly stamped and

signed by agency and officer Incharge has to

ensure the value of earthing resistane mentioned

in test Certificate) & having back filling

compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C)

Back fill Compound :- Earthing compound

should be capable to retain moisture for long

time Necessary test report must be submitted by

Agency. (a) For Electrical Installation up to 440V

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Item Description of Item Quantity Unit Rate In Amount

289 Providing & erecting weather proof, dust & 22.80 Smt. 10468.65

vermin proof, floor mounted front operated

indoor type cubical panel board necessary IP-42

and above protection as per approval from

engineer incharge made from 14 SWG thick CRC

M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S.sheet for internal partitions with

necessary accesories, supporting angles/ flats

channel including cutting, bending, drilling,

welding, riveting with internal partitions & cable

alley as per requirements & instruction of

engineer-in-charge with erection of supplied

switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium

strips, rubber grommets, rib, bakelite control

fuses/MCB for measuring instruments, earth bus

& earth bolts, foundation flange - bolts-base

Plates, sufficient nos. of hinged doors, handles

with locking arrangement and rubber

gasket,heavy duty end terminal

connection,danger notice board, necessary

ventilation, earthing strip complete. The Panel

shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus

bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The

dimension shall be measured excluding base

beams) The panel shall be supplied with

following approved manufacturers with

290 Providing, erecting, fabricating the M.S. structure 240.00 Kg. 77.77

as per requirement on site incorporating proper

size of M.S. angles,square,round, flats, bars,

channels, sections complete with cutting,

welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per

direction of engineer in charge with necessary

grouting, cementing, plastering & finishing

291 Providing and erecting XLPE (IS:7098) (I)-88 ISI 380.00 Mtr. 378.75

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (D) 3 1/2 core 70 Sq.

mm ( 35 Sq. mm 1/2 core)

292 Providing and erecting XLPE (IS:7098) (I)-88 ISI 80.00 Mtr. 540.35

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (F) 3 1/2 core 120 Sq.

mm ( 70 Sq. mm 1/2 core)

Item Description of Item Quantity Unit Rate In Amount

293 Providing and erecting XLPE (IS:7098) (I)-88 ISI 600.00 Mtr. 1168.57

armoured cable multistrand Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (I) 3 1/2 core 240 Sq.

mm( 120 Sq. mm 1/2 core)

294 Providing and erecting XLPE (IS:7098) (I)-88 ISI 1190.00 Mtr. 126.25

armoured cable multistrand / Solid Aluminium

conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of

following size of cables (B) 4 core 6 Sq. mm

295 Making trench in soft soil of suitable width of 90 80.00 Mtr. 55.55

cm deep for laying cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

296 Making trench in Hard Murrum / Tar Road of 160.00 Mtr. 74.74

suitable width of 90 cm or required depth for

laying any size of cable or locating the fault all

over the run and back filling the same and

making the surface as normal ground.

297 (B) If additional machinery like hammer driller 590.00 Mtr. 357.54

or JCB use [Add]

298 Providing & laying approved make Double 900.00 Mtr. 137.36

walled corrugated pipes (DWC) of polyethylene

(conforming to IS 14930 II) with necessary

connecting accessories of same material at

required depth in existing trench for laying of

cable. below ground / road surface for enclosing

cable (D)120 mm outer dia.

299 Providing and, fixing heavy duty flange type 92.00 Nos. 38.38

brass cable gland with rubber ring for PVC

insulated armoured cable complete with out

going tails, insulating tape etc for following size

of cables. (B) 2 to 4 core 6 Sq. mm

300 Providing and, fixing heavy duty flange type 12.00 Nos. 103.02

brass double compression type cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables. (C) 3 & 1/2 core

301 Providing and, fixing heavy duty flange type 4.00 Nos. 131.30

brass double compression type cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables. (D) 3 & 1/2 core

302 Providing and, fixing heavy duty flange type 4.00 Nos. 247.45

brass double compression type cable gland with

rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc

for following size of cables. (H) 3 & 1/2 core

Item Description of Item Quantity Unit Rate In Amount

303 Solder less crimping type Aluminium lugs 264.00 Nos. 6.06

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/

cadmium plated nut bolts in an approved

manner. (A) 1.5/ 2.5/4/6 Sq.mm

304 Solder less crimping type Aluminium lugs 48.00 Nos. 25.25

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/

cadmium plated nut bolts in an approved

manner. (E) 70 Sq.mm.

305 Solder less crimping type Aluminium lugs 16.00 Nos. 40.40

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/

cadmium plated nut bolts in an approved

manner. (F) 95 Sq.mm.

306 Solder less crimping type Aluminium lugs 16.00 Nos. 85.85

conforming to IS suitable for cable of following

size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/

cadmium plated nut bolts in an approved

manner. (J) 240 Sq.mm.

307 Providing and fixing approved make Perforated C 480.00 Rmt 424.20

type cable tray. Made from sheet steel. The cable

tray should be single or double bended as per

required and as per IS 2062/1079 and shall be

coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erection with

necessary support( included) as per

Specification and as per instruction of engineer in

charge.. (3) 150 X 50 X 1.6 mm Thick

308 Providing and fixing approved make Ladder type 40.00 Rmt 523.18

cable tray. Made from M.S sheet. The cable tray

should be bended as per IS 2062/1079 shall be

fabricated of double bended channel section

longitudinal members with single bended

Channel section. Rungs of members welded to

the base of the longitudinal members at 250 mm

c/c spacing . as per IS and shall be coated with

hot dip galvanizing as per IS 2629/4759. with

coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erected on existing

support as per Specification and as per

instruction of engineer in charge.. (8) 150 X

Item Description of Item Quantity Unit Rate In Amount

309 Providing and erecting Approved make Ceiling 180.00 Nos. 1596.81

fan with double ball bearing ISI mark with

condenser A.C. 23OV.50 c/s.1200 mm. sweep

complete, canopy erected on existing hook or

clamp with earthing. [Make shall be approved by

Engineer in charge]

310 Supplying and erecting 19 / 20 mm. nominal 180.00 Mtr. 108.07

bore Medium Class M.S. Pipe down rod erected

duly painted for fan complete with proper

insulation without leakage and earthing.

311 Supplying & erecting fan hook box of 10 mm 180.00 Nos. 108.07

M.S. round bar bounded to the RCC bars up to

50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary

312 Supplying & erecting single phase approved 4.00 Nos. 3937.99

make industrial exhaust fan suitable for medium

duty ring mounted low noise operation suitable

for medium duty having following dia size and

maximum speed in RPM [E] 450 mm dia

313 Supplying and erecting approved make 20.00 Nos. 6874.06

Octagonal pole made from HR sheet steel. The

pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS

2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB

Mounting, stud type terminal and arrangement

for cable termination to be erected With Suitable

foundation (Included) as per details given by

manufacturer considering site requirement. (C)

Mtr. Long 70 mm Top X 130 mm bottom dia,

mm thickness with 200mmX200mmX12mm

base plate, 4-M16 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 46 kg

314 Supplying and erecting Street light pole bracket 20.00 Nos. 491.87

comprising main B Class GI pipe of

cm/require outside dia. complete with suitable B

Class G.I. sleeve tubing of approx. 45cms.length

and suitable for 76.5mm/80mm/require size of

pole top having nuts and bolts for fixing the

brackets and having spread of 0.5 mtr. Length

with 110 deg.with vertical plane and suitable

welded stiffener reducer and nipple with check

nut complete painted with one coat.of Red oxide

/ PU base primer and two coats of Aluminium /

PU paint. paint with following nos of arms. [A]

Single Arm bracket 0.5 Mtr

Item Description of Item Quantity Unit Rate In Amount

315 Supplying & erecting approved make SMC press 26.00 Nos. 476.72

moulded composite FRP. loop-in, loop-out

approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for

mounting mob & hinged doors as per

requirement having locking arrangements with

mounting clamp with nuts, bolts & washers

suitable for erection on pole with cable clamps&

earth bolt of following size of box. (C)150mm x

125mm x 100mm [deep] Cat.II

316 Supplying & erecting IP 55 grade following size 2.00 Nos. 3595.60

section pillar fabricated from joint less M.S. Sheet

with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground

to have appropriate erection to work uniform

until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster

etc. hinged double door internally supported on

both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x

35 x 5 mm M.S. Angle of Two Nos. one is welded

and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out

side with three tank powder coated paint.

section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test &

followed by IS 2147 of 1962(B) 75 X 60 X 45 cm

section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X

35 X 5 mm thick MS angle.

317 Supplying and erecting wall mount speaker with 12.00 Nos. 2569.44

rated power of 30 watt/power tapping

30/15/7.5 watt available,opening angle

degree H * 77 degree V ,sound pressure level

dB ,frequency response of 70Hz to 20KHz

[[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

318 Providing and erecting cordless microphone with 4.00 Nos. 5135.85

UHF Diversity handheld wireless

microphone/caller wireless complete with

receiver and transmitter unit,Cardiod ,polar

pattern,dynamic microphone,LCD display for

battery and frequency status and information

preset channels,with compatible groups of

channels,14 hrs.battery life,frequency response

80Hz to 18KHz.,RF sensitivity <1.0 Uv,image

rejection > 55 dB,dynamic range >95 dB and

receiver having 32 channels,S/N ratio>100

dBA,Dynamic range>95 dB,distortion<1%

[[Approved by Competent Authority i.e. not

Below the rank of Executive Engineer ]

Item Description of Item Quantity Unit Rate In Amount

319 Supplying & erecting Amplifier having following 2.00 Nos. 6249.88

Power Output :100 W (RMS):(130 W Max.)

inputs :5 Mics & 2 Aux.

frequency Response :50-15000 Hz+3db

Tone Controls :Cut & Boost type

Speaker Matching :4-8-ohms 70- 100 V line

LED Meter :5 LED Array.

The amplifier suitable to operate 240V A.C.&

volt D.C. (Battery) with automatic changeover

from AC to Battery operation, duly protected by

wrong Battery Polarity connection. [[Approved

by Competent Authority i.e. not Below the rank of

Executive Engineer ]

320 Supplying & erecting Mixing Console having 2.00 Nos. 18386.04

channels, Audio mixer with. Echo facility for live

performance, Auditorium & stadiums, having

following features & facilities. [[Approved by

Competent Authority i.e. not Below the rank of

Executive Engineer ]

(a)input Channels :- Each channel has separate

6.25mm size balanced phone jack for mike &

line for balanced & unbalanced signals.

(b)Individual gain control for sating optimum

level for minimum noise.

(c)BASS, MID & TREBLE ‘ controls Separately for

each input channel.

(d)ECHO control for each channel

(e)PAN control for echo channel for left or right

(f) AUX Control : To control , level of the channel

in final mix to AUX sound output

(g)Channel ON/OFF switch

(h)ECHO Section :- ECHO, reverb & Chorus effect

can be added to all input channel by different

setting of Delay, Reverb & Level control.

(i)Tape section

(j)Aux. send & return For sending Pre-feeder

output of channel for monitoring or adding a

special effect unit.

(k)Mono / Stereo output controls

(L)Master faders to control over left & right

(m) Head phone output for monitoring purpose.

Technical specification

(a)Power Requirement -AC220-24OV 50 Hz

(b)MIC Output Impedance/gain -2 K Ohms/

(c)Line Output Balance/42 dB —- 20 K

Item Description of Item Quantity Unit Rate In Amount

(d) Impedance / Gain :- 10Kohms unbalance

(e)frequency Response - 30 Hz- 20 KHz L / R

Line Output ( + 0, -1 dB )

(f)Equalization Bass/ - + / - 12 dB at 100Hz

Mid / Treble 2 KHz / 10 KHz

(g) Outputs, Line Output Line Output Low : -

10 dB / -2 dBM Line Output High : 0 dBM /

(h) S/N ratio Line Output Level : > 70 dB (0 dB,

The Console shall be mounted on standard Rack,

The channel of following numbers.

(A) 14 Channel Audio Mixer with ECHO

321 SITC of 3LCD Lamp based projector having wxga 10.00 Nos. 33895.60

(1280x800) or better resolution with minimum

white brightness of 3800 lumens and color

brightness of 3800 lumens. The projector should

have minimum 1HDMI,1VGA input. Having

contrast ratio of 15000:1 or more. the projector

should have auto vertical key stone correction of

+/- 30 degree and Manual Horizontal of +/-30

degree. the projector should have optical lens,

throw ratio 1.30-1.56:1. Zoom Factor of 1.2. Lens

focus Manual having focal length 16.9mm to

20.28mm. projector should have features like AV

mute slide, quick corner and split function and

should support wireless functionality with inbuilt

wifi or wifi dongle. [Approved by Competent

Authority i.e. not Below the rank of Executive

322 SITC of 100 inch Self Lock MW (7 x 5) Instalock 10.00 Nos. 3810.73

Slow Retraction Screen, Aspect Ratio-4:3

[Approved by Competent Authority i.e. not Below

the rank of Executive Engineer ]

323 Providing and erecting Inverter based approved 16.00 Nos. 51666.55

make split air-conditioning unit consisting of

condensing unit with variable speed fan motor,

inverter type hermetically sealed rotary

compressor with accessories etc. duly connected

separately erected evaporating unit and blower

motor with its accessories by means of extra

supplied proper insulated copper tubing,drain

PVC pipes suitable for ( cost includes Eco

Friendly green gas charging and 15A plug top &