Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.5 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹37.0 L+₹1.5 L (4.17%)Rejected-AOC MUKALATH VALAYANCHIRANGARA PO PERUMBAVOOR ERNAKULAM KOCHI 683556 | PERUMBAVOOR | ERNAKULAM | KERALA | 683556 | L2 | Rejected-AOC L2 | |
| 3 | L3₹38.4 L+₹2.9 L (8.26%)Rejected-AOC CHENNAMKULATHI HOUSE ARAKKUNAM PO DIST ERNAKULAM KERALA 682313 | ARAKKUNAM | ERNAKULAM | KERALA | 682313 | L3 | Rejected-AOC L3 |
Tender Value
₹37 L
EMD Value
₹74,000
Closing Date
20 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NS KOCHI
Military Engineer Services Garrison Engineer (Naval Services) Kataribagh, Naval Base Post Kochi 682004.
PROVISION OF LOW SECURITY WALL NEAR VIDAKUZHA AT NAD ALWAYE
2022_MES_546976_1
8948/E8
Open Tender
Civil Works
Item Rate
210 days
ALWAYE
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE NS KOCHI
₹74,000
Yes
31 Oct 2022
23 Aug 2022
22 Sept 2022
23 Aug 2022
20 Sept 2022
3 Sept 2022
23 Aug 2022 - 2 Sept 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and as directed by Engineer in Charge
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundation, wells, manholes etc. not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in hard dense soil complete all as specified and as directed by Engineer in Charge.
Material and labour for Cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and as directed by Engineer in Charge.
Material and labour for Reinforced cement concrete (design mix) M-30 (20mm graded Aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc and mass concrete complete all as specified and as directed by Engineer in Charge.
Material and labour for Reinforced cement concrete (design Mix) M-30 (20mm graded Aggregate) in Columns, pillars, piers, posts and struts complete all as specified and as directed by Engineer in Charge.
Material and labour for Reinforced cement concrete (design mix) M-30 (20mm graded Aggregate) in Beams, cantilevers, complete all as specified and as directed by Engineer in Charge.
Material and labour for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for Rough finished flat surfaces. Complete all as specified and as directed by Engineer in Charge.
Material and labour for Formwork to sides of pillars, posts, struts, piers, columns for rough finished flat surfaces complete all as specified and as directed by Engineer in Charge.
Material and labour for Formwork to sides and soffits of floor or roof beams, beam launchings, lintels etc for rough finished flat surfaces complete all as specified and as directed by Engineer in Charge.
Material and labour for Formwork to edges of concrete flats, openings in concrete walls and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide complete all as specified and as directed by Engineer in Charge.
Material and labour for Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 (20 mm graded Aggregate), exceeding 10 cm in width and setting in 1:6 cement mortar, complete all as specified and as directed by Engineer in Charge.
Material and labour for rendering 15mm thick with cement mortar 1:4 on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer in Charge.
Material and labour for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer in Charge.
Material and labour for Mild steel TMT bars 5 mm dia over up to and including 10mm dia in stirrups, spacers and binders , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed by Engineer in Charge.
Material and labour for Framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framework of water tanks and similar work conforming to Fe-290 Grade-E-165 complete all as specified and as directed by Engineer in Charge.
Material and labour for two coat of cement based paint over one coat of priming with alkali resistant including preparation of new surfaces, complete all as specified and as directed by Engineer in Charge.
Material and labour for two coat of synthetic enamel paint over one coat of red oxide with including preparation of new steel surface complete all as specified and as directed by Engineer in Charge.
Returning, filling in hard dense soil including spreading, leveling, watering and well ramming inlayer’s not starting point. Complete all as specified and as directed by Engineer in Charge.
Removing excavated material soil not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed by Engineer in Charge.
Material and labour for Plain cement concrete type B1 1:2:4 (20mm graded aggregate) as in coping complete all as specified and as directed by Engineer in Charge.
Material and labour for Broken glass coping in cement mortar1:3 on top of wall complete all as specified and as directed by Engineer in Charge.
Kuriako Mathai and company
M/S AARJAY ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .