Loading…
Loading…
Cancellation of Tender
Cancellation of Tender
Due to admistrative reasons/issues
cancelled_1.pdf
Tender Value
₹3.0 L
EMD Value
₹6,100
Closing Date
8 Jan 2026, 10:30 amClosed
Executive Engineer
HP City Transport and Bus Stand Management And Development Authority Tutikandi Shimla -4
SH Repair to septic tank area
2025_BSMDA_123993_5
No.HPBSMDA/EE/(2)2025-2026 Tender Vol-V
Open Tender
Civil Works
30 days
Baijnath
Please refer tender document
9 documents required · 9 mandatory
₹415
HPBSMDA
₹6,100
23 Dec 2025
20 Dec 2025
8 Jan 2026
21 Dec 2025
8 Jan 2026
21 Dec 2025
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto approved dumping site, All kinds of soil, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Centering and shuttering including strutting, propping etc. and removal of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc., including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (One cement isto Five fine sand isto Ten graded stone aggregate) 40 mm (Forty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate) 20 mm (Twenty milimeter) nominal size , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
52 mm (Fifty two milimeter) thick cement concrete flooring with concrete hardener topping, under layer 40 mm (Forty milimeter) thick cement concrete 1:2:4 (One cement isto Two coarse sand isto Four graded stone aggregate 20 mm (Twenty milimeter) nominal size and top layer 12 mm (Twelve milimeter) thick cement hardener consisting of mix 1:2 (One cement hardener mix isto Two graded stone aggregate) 6 mm (Six milimeter) nominal size by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Centering and shuttering including strutting, propping etc. and removal of form for : Edges of slabs and breaks in floors and walls Under 20 cm (Twenty Centimeter) wide, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (One cement isto One and half coarse sand isto Three graded stone aggregate 20 mm (Twenty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire, all complete upto plinth level.: Thermo-Mechanically Treated bars of grade Fe-500D or more, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
Please Enable Macros to View BoQ information
stage.html
html • 0.02 MB
cancelled_1.pdf
pdf • 0.26 MB
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.92 MB
SBD5.pdf
Tender Documents • 10.51 MB
BOQ_182260.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid