ADDN ALTN TO CERTAIN SMQ OF VAYU VIHAR AT HQ SAC U UNDER GE AF TRIVANDRUM

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick or concrete as in backing coat in CM 1:4 complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L 15 mm thick rendering in CM 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth with using extra cement all as specified and directed.

M & L 15 mm thick rendering in CM 1:6 on brick or concrete surfaces including finishing the surfaces even and smooth with using extra cement all as specified and directed.

M&L for preparation new wall surfaces and applying two coats of acrylic emulsion distemper on wall surface over a coat of primer complete all as specified and directed.

M&L for preparation of new/undecorated surface of wall and applying two coats of exterior emulsion weather coat paint (Anti-fungal)over one coat of primer complete all as specified and directed.

M&L for preparation of old surface and applying one coat of acrylic emulsion distemper on wall surface, complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutter from the frame) not exc 1.5 sq. m each complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutter from the frame) exc 1.5 sq. m but n exc 4 sq. m eachcomplete all as specified and directed.

Taking down shutter from the frame exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge & directed.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. Note:- Rate inclusive of glass pane/PVC Sheet as per direction by Engr-in-Charge.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made all as specified and directed .

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi?chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: Note:-1) Glass panes and wiremesh shall be fixed at factory itself and the quoted rate is deemed to be inclusive of glass panes of 5.00 mm thick and wiremesh. 2. For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made all as specified and directed .

S&F for factory made uPVC Openable window/ ventilator single panel as per following details. A) Outer frame for double leaf shutter. B) openable shutters with suitable hinges for both glazed and gauzed (Wiremesh) shutters. C) Suitable handles and locking system for shutters. D) Aluminium grill to be provided on frame in between glazed and gauzed shutters. Note:-1) Glass panes and wiremesh shall be fixed at factory itself and the quoted rate is deemed to be inclusive of glass panes of 5mm thick and wiremesh. Note:-2) Size of the uPVC sections shall be as per manufactories catalogue of Villa windows series of M/s OKOTECH or equivalent complete all as specified and directed by Engineer-in-Charge. Note:(i) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (ii) Rate inclusive of glass panes / Stainless steel wiremesh pane all as specified and directed .

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size Frame size 100 X 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed .

S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size Frame size 125 X 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed .

S & F factory made second class HW 35 mm thick Plain panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treatedsupplied and fitted to chowkhats complete all as specified and as directed.

Supply and fix 2nd class hard wood 35 mm thick gauzed/glazed and skeleton factory made shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.20 (a) ; supplied and fitted to chowkhats complete all as specified and as directed.

Resecuring or easing & fixed the shutters on WPC chowkhats exceeding 1 sqm and not exc 2 sqm each, complete all as specified and directed.

Taking down shutters exc 1.00 sqm and n.exc 2.00 sqm and refixing in the same opening after necessary easing & resecuring the shutters on WPC chowkhats complete all as specified and directed.

S & F Stainless steel butt hinges 100 mm long, complete all as specified and directed.

S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed .

S & F 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F 200mm long extruded aluminium alloy handles, fabricated type, anodised and fixed, complete all as specified and directed.

S&F in repairs aluminium anodized barrel tower bolt of extruded section and size 150 mm long complete all as specified and directed.

S & F in repairs 200 mm long aluminium, anodised, barrel tower bolts of extruded section, ISI marked, complete all as specified and directed.

S&F in repairs extruded aluminium alloy handles, fabricated type, anodised of size 150 mm long complete all as specified and directed.

S & F aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminum alloy complete all as specified and directed.

S & F in repairs aluminium alloy anodised sliding door bolt with hasp and staple (bolt type), 250 mm long, and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alluminum alloy complete all as specified and directed.

S&F in repairs aluminium weather strip with Nylon brush insert suitable for bottom of door shutters of wooden/aluminum all as specified and directed.

M & L MS Bands, straps, hold fasts and similar small articles conforming to Fe-290 Gde E-165 all as specified and directed .

M & L preparion of new wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer all as specified and directed .

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length 140mm complete all as specified and directed.

M & L in repairs aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire sta-ples, complete all as specified and directed.

S&F mild steel work as framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L prepartion of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc crome complete all as specified and directed.

Dismantling boarding including fittings, if any, any description fixed in any position with nails complete all as specified and directed.

M & L 18/19mm thick Marine plywood, prelaminated on both sides with decorative choice laminations, fixed with screws to timber frame work as in cupbords, warddrops, kitchen covered cabinet etc including pvc decorative lipping around the plywood, complete all as specified and directed.

M&L for 2nd class hard wood plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads exc 13 but not exc 25 sqcm complete all as specified and directed.

S&F stainless steel auto close hinges suitable for wardrobes, shutters etc all as specified and directed .

S&F 5mm thick Solid PVC plain colour sheet inclusive of solvent cement and fixing at site on plastered wall complete all as specified and directed.

S&F 150mm brass handles for cupboards/ warddrop shutters, complete all as specified and directed.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F stainless steel plain basket size - 19 x 20 x 4 inch to complete all as specified and directed.

S&F stainless steel cutlery basket size - 19 x 20 x 4 inch to complete all as specified and directed.

S&F stainless steel cup & saucer basket size - 19 x 20 x 4 inch to complete all as specified and directed.

S&F auto close telescopic channels of 45 kg capacity to be design drawer size and to meet the weight requirement with minimum length 20 inch to ensure smooth movements of drawer with / without content weights, complete all as specified and directed. Make :- Kaff/ Hettich/ Hafele or equivalent.

S&F in repairs 25mm dia stainless steel curtain rod including supporting brackets and end caps/dome complete all as specified and directed.

Dismantling single layer mangalore pattern or similar tiles in roofing incl ridge tiles complete all as specified and directed.

M&L for cement mortar fillets of 40 mm wide and 20 mm thick for laying mangalore pattern tile on roof, in cement mortar 1:4, complete all as specified and directed.

M&L for Roof tiles Mangalore pattern inter locking at side joints, laid dry, complete all as specified and directed.

All as per item above above but except tiles all as specified and directed .

M&L Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and pointed in cement mortar 1:6 all as specified and directed .

All as per item above but except tiles all as specified and directed .

Taking down cement plaster including existing roof treatment or fillets on roof surfaces and wall surfaces complete, racking out joints, hacking for key scrubbing down with water etc and removing rubbish to a distance exc 250m and not exc 500m, complete all as specified and as directed.

Demolition of cement concrete in roofs, floors (other than ground floor), beams, staircases, landing and similar suspended work, complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on fair surfaces of brick masonry or concrete surface, finished the surface even and smooth with using extra cement incl using WPC as per manufacturers instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately.

Supply only liquid waterproofing compound (ISI grade only) all as specified and directed .

M&L PCC 1:2:4 type Bo using 12.5mm graded stone aggregate as in padding concrete for roof, plinth courses, string courses, water troughs and the like finished even and smooth including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed .

M&L for applying two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating on existing roof screed/plaster surface including equipments and supervision charges in following step by (i) Roof substrate must be pressure-washed with water with, a minimum working pressure of 1,400 psi is to be used to remove all dirt, dust, chalking and waste products, complying with standard specification and as directed by the Engineer-in-Charge. (ii) Inspect for cracks over roof screed, roof wall junction, water drain inlets/outlets if any, and clean and moisten them. Crack’s width should be wide up to 5-6 mm with mechanical cutting machine and Apply bond coat of SBR Latex in the ratio of 1:1 (URP 1: Cement 1) followed by groove should be filled with PMM by preparing Polymer modified mortar of CM 1:1 (Silica sand size ≤ 300microns) admixed with SBR Latex at a dosage of 15% of cement. (iii) Providing 300mm x 300 mm Square / rectangle upstand of M20 grade concrete or with PMM around mechanical equipment like HVAC, airconditioning, solar panels. Etc. Apply a coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating allow to cure for 3-4 hours and followed by apply two coats two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating reinforced with 45 Gsm glass fiber mesh or geo textile without dilution in the interval of 4 -6 hrs. Apply Hybrid PU Sealant at around the junction of fabricated stand inserted and wall mounting mechanical fixtures. (iv) Providing Minimum 50mm thick angle fillet with CM of 1:3 admixed with SBR Latex at a dosage of 12-15% of Cement and a bond coat of SBR Latex mixed with Cement at a ratio of 1:1 all as specified and directed .

(v) Premix hybrid Polyurethane waterproof coating components A and B with an electric double paddle mixer stirrer for 2-3 minutes at a slow speed. The concrete surface must be brought into surface saturated dry condition (SSD). Providing and apply first coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating to the existing screed/plaster at a rate of 0.5Kg/sq.mt/coat. Place a 45-GSM glass fiber mesh or 200- 225 GSM raw mesh between the first and second coats while the first coat is still wet. Allow the first coat to dry for 3-4 hours. Apply the second and third coats of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 3-4 hours after application. Ensure that no void surface is left untreated or uncoated. All coats should be applied in directions perpendicular to each other, ensuring the correct consumption of material, resulting in a total dry film thickness of 1000 microns with system coverage in three undiluted coats at a rate of 1.50 Kg/ sq.mt/coat. Allow the system to air cure for 5-7 days minimum all as specified and directed .

The material should conform to the specified technical properties: a) Tensile Strength with Fiber ≥9N/mm2 as per ASTM D 2370 b) Elongation at break ≥ 200% as per ASTM D 2370 c) Crack bridging ability ≥ 3mm as per EN 1062-7-2004(A) d) solid content ≥55% as per ASTM D 1,644-2001 e) Abrasion resistance 15mg confirming to ASTM D 4060 f) Shore-A 65 as per ASTM D2240 g) Tear Resistance with Fiber 40N/mm as per ASTM D 624. The waterproofing coating shall be applied over the entire horizontal surface and extended onto the vertical surface of the parapet wall, as per the manufacturer methodology as directed by GE/Engineer-in-Charge. Note: All waterproofing work suggested above shall be carried out by the in house application wing of the manufactuer or skilled waterproofing contractor under the guidance of a technical expert from the manufacturer. The technical expert should audit the quality of the waterproofing work and submit the report. The contractor should submit the skilled project waterproofer certificate issued from the manufacturer while receiving the work order. The above chemical can be processed from the other equivalent products such as Sika/Berger paint/Pidilite/CERA/any command CE approved product all as specified and directed .

M&L for provn of water proofing roof treatment to accessible/non-accessible RCC roof with APP based polymeric membrane including dimantling of old APP membrane. The APP membrane should be minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application. The rate is inclusive of dismantling of old APP membrane. The new membrane shall be laid down as per follwing specifications :- (a) The surface of the roof, parapet and gutters, drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc by wire brushing and dusting. For cast iron drain outlets the groove shall be cut around to tuck in the treatment as pipes, chimney stacs etc and other similar situations to ease up about corners.(b) Bituminous primer conforming to IS : 3384-1965 oil bound bituminous primer @ 0.20 Kg per sqm and applying a coat blown grade hot bitumen 85/25 or 90/15 @ 1.20 Kg/sqm to be applied on prepared surface till the surface is properly impregnated.(c) APP modified water proofing membrane as specified shall be laid on the primer surface by torch application method as per manufacturer instructions. The overlaps while torching shall be 100mm in both directions (longitudenal and transverse directions). All overlap joints shall be sealed throughly by thermofusing both the membrane layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.(d) All joints & changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.(e) Apply one coat of solar reflective bituminous aluminium paint @ 100 gm per sqm over a coat of aluminium red oxide primer on the APP membrane, complete all as specified and directed by Engr-in-Charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius in CM 1:6, complete all as specified and directed.

Dismantling water tanks and removing to store exc 500 and not exc 1000 Ltr capacity all as specified and directed .

S&F rotational moulded polythene water storage tank (Cylinderical vertical with close top) hoisted and fixed in position all as specified in repairs 750 ltrs capacity all as specified and directed .

S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron/UPVC pipe of 32mm dia bore and fixed, complete all as specified and directed.

Disconnecting existing tanks, exc 500 & n.exc 1000 ltr capacity, setting aside (or lowering if required) for repairs, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc, and hoisting if required reconnecting and re-fixing in position all as specified and directed .

Taking up or down 25/32mm bore steel tubing and connections, including cleaning for refixing, complete all as specified and directed.

S&F 32 mm bore pipe (LEAD FREE), Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed, complete to walls, ceilings or in floors etc., all as specified and directed .

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing, complete all as specified and directed.

S&F 20mm bore pipe (LEAD FREE), Unplasticised PVC pipes of pressure rating 10 kgf/cm2, fixed complete to walls, ceilings or in floors etc., all as specified and directed .

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc all as specified and directed .

M&L for point wiring complete with 1.5 Sqmm single core FRLSH PVC insulated unsheathed cable 1100 V grade multi stranded copper conductor drawn through and including non metallic rigid PVC conduit and accessories concealed in walls/ceilings including 1.5 Sqmm dia multistranded copper cable as earth continuity conductor connected to common earth dolly, including 2 mm thick modular metal flush box and suitable modular white cover plate with frame etc all as specified and directed.

(a) One light /bell / fan point controlled by one switch/bell push

(b) One light point controlled by two way switch

(c) One switch socket outlet 5 Amps on same board

(c) One switch socket outlet 5 Amps on independent board

(e) All as per item No 78 above but with copper conductor cable FRLSH 2.5 sqmm for one 3 pin socket outlet, 16 Amps concealed in wall/ ceiling and including provision of 2.5 sqmm PVC insulated copper conductor cable as earth continuity conductor on independent board

M&L for submain wiring with 2 Runs 4 Sq mm for phase and neutral and 1 runs of 4 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and aqccesssories and concealed in walls / ceiling all as specified and directed including taking down old sub main wiring.

M&L for submain wiring with 2 Runs 6 Sq mm for phase and neutral and 1 runs of 6 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit and aqccesssories and concealed in walls / ceiling all as specified including taking down old sub main wiring.

M&L for submain wiring with 2 Runs 10 Sq mm for phase and neutral and 1 runs of 10 Sqmm earth continuity conductor 1100 v grade PVC insulated unsheathed FRLSH grade copper conductor cable single core multistranded ISI marked drawn through PVC rigid conduit all as specified and directed incliuding takling down old submain wiring.

Supply and fix Modular switch 1 way 6A 1 module

Supply and fix Modular socket 6A 2/3 pin combined 2 module

Supply and fix Modular switch 1way 16 A 1 module

Supply and fix Modular socket 6A /16A 2/3 pin combined 2module

Supply and fix modular bell push 6A 1 module

Supply and fix modular 2way 6A 1 module

Supply and fix Call Bell Music type

Supply and fix Modular regulator , 120 w - 2 module

S&F Ceiling rose, surface bakelite, 65x50mm, two to three terminals AC,230 V complete all as specified and as directed

S&F MCB Protected socket with sheet steel enclosure with MCB SP of capacity 20 Amp complete all as speccified and directed. Make : Havells/Crompton/Wipro

Taking down unserviceable MCB distribution board, S & F Vertical TPN 4 way of any size and capacity double door with suitable busbar including space for fixing of MCCB 63 Amp disconnecting from mains and making good the disturbed surfaces all as directed.

Taking down unserviceable MCB distribution board, S & F SPN 12 way of any size and capacity double door with suitable busbar including disconnecting from mains and making good the disturbed surfaces all as directed.

Supply and fix only the MCB 230V,50Hz, 'C' curve AC with repturing capacity 10kA of the following capacities all as specified and as directed.

(a) SP 5 To 32 Amp

(b) RCCB 40 amps sensitivity 100mA

Supply and fix MCCB 4 Pole 440 volts AC 50 HZ 63 Amps 25KA, adjustable thermal magnetic release all as specified and directed .

Removing of exsiting Ceiling fan 1200mm/1400 sweep from postion, painting with synthetic enamel paint by spray painting including filling cavities with filler one coat after cleaning all dust etc, kept in safe custody and refixing after completion of work to postion, alongwith required accessories in new postion as directed

M&L for cutting & removing the burnt winding of ceiling fan of 1200/1400 mm sweep and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing heating and insulating and reassembling the spares complete all as specified.

M&L for cutting & removing the burnt winding of Exhuast fan of 300/450 mm sweep and cleaning the slot,rewinding with super enamelled copper wire of suitable size ,varnishing heating and insulating and reassembling the spares complete all as specified.

Removing of exsiting Exhaust fan up 300mm/450mm sweep from postion, painting with synthetic enamel paint by spray painting including filling cavities with filler one coat after cleaning all dust etc, kept in safe custody and refixing after completion of work to postion, alongwith required accessories in new postion as directed

S&F exhaust fan,steel body AC single phase 230 V of size 300mm sweep with blades and frame and louvers incl cutting suitable size hole as specified and directed.

Supply and fix Antisuicide fan rod including taking down of old ceiling fan rod ( SMART FAN DOWN ROD ) of length 300 mm (12"), white in colour 19mm OD, 1.8mm +/-0.05mm thick , spring set bgrade 3 carbonsteel pipe zinc plated, MSME tested for performance test and opening of impact load of 22 Kgf+and spring hidden in pipe will expand to about 1 meter complete with dafty hole screw all as specified and directed .

Disconnecting and taking down the unserviceable earthing and M & L for Earthing complete with GI earth plate 60x60cm.x6mm thick buried directly in ground vertically to a depth not less than 2.25m below ground level with top edge of the earth plate to a depth not less than 1.5m below ground level, connected to and including GI wire 4mm dia with GI protection pipe 15mm dia light grade connected upto DBs by means of bolts, nuts, check nuts and washers made of copper, galvanized iron pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I

DJ GROUP (BID ID -3365199)

DEFT GROUP ELECTROMECHANICAL (BID ID -3367157)

JR ENTERPRISES (BID ID -3358250)