Annual surfacing on Maloh Kateru road (VR)

Amount

Repair of pot hole by Providing, laying, spreading and compacting stone aggregates of specific sizes to crushed stone agreegate specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405 including all leads , lifts of material and other incidentals .

Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.On bituminous surface @ 0.25kg/sqm including all leads , lifts of material and other incidentals .

Providing and laying 30 mm ( thrty millimetre ) thick Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity including all leads , lifts of material and other incidentals .

Providing and laying V- shape PCC drain with cement concrete 1:3:6 ( one cement : three sand : six graded stone aggregate 20mm (twenty millimeters ) nominal size with thickness of 10cm ( ten centimeters) of size 45cm x 25cm( forty five centimeters x twenty five centimeter ) and curing complete as per direction and entire satisfaction of Engineer –in- Charge including all leads , lifts of material and other incidentals .

Painting lines, dashes, arrows, etc. on roads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702.the desired compaction as per MORT & H specification Cluase 509 complete including all leads , lifts of material and other incidentals .

M/S NAWAL KISHORE AND SONS