Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.8 LAccepted-AOC | L1 | Accepted-AOC L1 and reasonable | |
| 2 | L2₹46.1 L+₹1.1 L (2.46%)Rejected-AOC H1 7 8 IT PARK ROAD NO 4 IPIA KOTA RAJ 324005 | KOTA | RAJASTHAN | 324005 | L2 | Rejected-AOC Not Lowest | |
| 3 | L3₹46.3 L+₹1.3 L (2.89%)Rejected-AOC | L3 | Rejected-AOC Not Lowest |
| Sl No | Description | Qty | Unit | AMAR CONSTRUCTION L1 | Aditya Enterprises L2 | AZAD SERVICES L3 |
|---|---|---|---|---|---|---|
| 0.00Schedules of Works | ||||||
| 1.00 | M&L Tripod Earthing Complete with 3 numbers of 17mm, 250 micron, 3 metre long copper rod buried directly in earth pit not less than 5.0 M deep below normal ground level and copper rod connected to copper strip of size 50 x 6 mm by brazing only, earth strip protected with light grade GI Pipe 80 mm dia bore from copper rod and up to and including the earth test point made of gunmetal Phosphorous bronze of size 75x75x25 mm. The earth pit filled with 27 Kgs of Curec+ and 50 Kgs of Curecon chemicals and removal of the excavated soil depositing at place where directed, PCC Pit in PCC ( 1:3:6 ) type C1 using 20 mm graded stone aggregate, 40 mm thick in RCC ( 1:2:4 ) type B 1 using 20 mm graded stone aggregate reinforced with 8mm dia TMT bars @ 75 mm c/c both ways including provision of MS angle iron frame of 40 X40X 3 mm, testing complete all as directed and specified.
Notes:-
i) Earth conductor from earth plate to equipment up to 7.5 M length deemed to be included in the rate quoted by the contractor and beyond 7.5 M will be measured and paid under the respective item of the schedule.
ii) Cost of excavation, returning and filling, earth work required based on the nature of earth pit for satisfactory completion of job deemed to be inclusive in the unit quoted rate.) | 12 | EACH JOB | 26,500 ₹3,18,000 | 27,000 ₹3,24,000 | 25,000 ₹3,00,000 Lowest |
| 2.00 | Supply, installation, testing & commissioning of Digital Grounding Device 120 kA single phase 3 wire portable type with resistance sensor built in low impedance equipment grounding and bonding system to Provide 100% protection against Lightening surges, static charge, noises, ESD, EPR and eliminate abnormal electrical disturbances which enter from power and other service lines and ensuring clear bonding potential (earth to neutral voltage) less than 1.0 V having a digital 6 digit lightening surge counter, self-health visual status indicator with facility to monitor online input voltages & earth to neutral voltages pre-wired pulverulent body painted metal enclosure to be connected in parallel to the power supply circuit, tested and certified from CPRI, MIL STD810G, IEC61000-6-1, IEC 61000-6-3, IEC 61643-11-2011 & confirming to ISO 9000 & ISO 14001-2015 & CE complete all as specified and as directed by Engineer-in-Charge.
Make : DSS Digital Equipment Protection Co/ Nextechno Gen Private Limited/ Magnus Global Power Solutions or any equivalent make approved by GE, Model: DSE-MII 1P3 120 complete all as specified and as directed. | 2 | EACH JOB | 1,49,000 ₹2,98,000 Lowest | 1,70,000 ₹3,40,000 | 2,10,000 ₹4,20,000 |
| 3.00 | Supply, installation, testing & commissioning of Digital Grounding Device 240 kA 3 phase 4 wire portable type with resistance sensor built in low impedance equipment grounding and bonding system, provides 100% protection against Lightening surges, static charge, noises, ESD, EPR and eliminates abnormal electrical disturbances which enter from power and other service lines and ensuring clear bonding potential (earth to neutral voltage) less than 1.0 V having a digital 6 digit lightening surge counter, self-health visual status indicator with facility to monitor online input voltages & earth to neutral voltages pre-wired pulverulent body painted metal enclosure to be connected in parallel to the power supply circuit, tested and certified from CPRI, MIL STD810G, IEC61000-6-1, IEC 61000-6-3, IEC 61643-11-2011 & confirming to ISO 9000 & ISO 14001-2015 & CE complete all as specified and as directed.
Make : - Model: DSE-MII 3P4 240 of make DSS Digital Equipment protection Co. or equivalent model in Nextechno Gen Pvt ltd / Magnus Global Power solutions as approved by GE. | 1 | EACH JOB | 2,00,007 ₹2,00,007 | 2,00,000 ₹2,00,000 Lowest | 2,20,000 ₹2,20,000 |
| 4.00 | M&L for PVC single core (flexible) copper conductor cable, PVC insulated (unsheathed) 1100 volts conforming to IS:694 of 50 Sqmm complete all as directed and as specified. | 390 | RUNNING METRE | 407 ₹1,58,730 | 415 ₹1,61,850 | 290 ₹1,13,100 Lowest |
| 5.00 | M&L Test point terminal box made out of gunmetal or phosphorous bronze of size 75x75x25mm drilled and screwed including 3 no's 8mm dia 25mm long hexagonal screws along with fixing arrangements complete all as directed. | 12 | EACH | 900 ₹10,800 Lowest | 999 ₹11,988 | 1,000 ₹12,000 |
| 6.00 | S&F for copper solid flat earth plate of size 50 cm x 50 cm, 8 mm thick duly making holes of 15 Nos min and providing suitable size copper nut, bolt and washers for connecting earth strips from different earth pits fixing the plate using suitable insulators, studs and hold fasts complete all as directed. | 2 | EACH | 4,500 ₹9,000 | 4,650 ₹9,300 | 3,680 ₹7,360 Lowest |
| 7.00 | M & L for earthing pit display board made out of 3 mm thick MS sheet of size 30 x 35 cm welded to 75 cm long 25 x 25 x5 mm thick MS angle iron grouted in PCC 1:3:6 (using 20 mm graded stone aggregate ) to a depth of 20 cm below GL and including applying two coats of synthetic enamel paints of approved colour over a coat of red oxide primer on all exposed steel surface and writing the letters on the plate for showing the following details : -
a) Earthing Pit No
b) Date of Measurement
c) Next Due Date
d) Standard Value | 12 | EACH | 300 ₹3,600 | 300 ₹3,600 | 280 ₹3,360 Lowest |
| 8.00 | Supply, install, connect, test and commissioning of flame proof / weather proof with fire retardant split AC comprising of indoor and outdoor units complete with cordless remote control unit with built in air ioniser, Plasma filter for better indoor air quality, leakage detector etc, of energy efficient rating of capacity 1.5 Ton with Eco friendly refrigerant R-32/407/410 A providing necessary fixing arrangements for indoor / outdoor such as outdoor stand copper pipe leak detection and rectification after installation. AC shall be strictly in compliance to CIMFR specifications complete all as specified and as directed. | 2 | EACH JOB | 3,10,000 ₹6,20,000 | 3,09,000 ₹6,18,000 Lowest | 3,25,000 ₹6,50,000 |
| 9.00 | Supply, install, connect, test and commissioning of flame proof voltage stabilizer of 4.0 KVA capacity for automatic operation, single phase naturally air cooled, indoor type & designed for input variation between 170V to 260V with output voltage stabilized at 230V with accuracy of ± 2.5% with high & low voltage cut out & time delay including electric connection complete all as specified and as directed. | 3 | EACH JOB | 1,17,000 ₹3,51,000 Lowest | 1,18,000 ₹3,54,000 | 1,20,000 ₹3,60,000 |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
17 Nov 2025, 6:00 pmClosed
GE(AF) BIDAR
Garrison Engineer (Air Force) Bidar, Military Engineer Services, Air Force Station Bidar, Bidar-585401
PROVISION OF FIRE RETARDANT FALSE CEILING AND WALL PANELLING, GLASS PANELS, SMART EARTHING, FLAME PROOF AC WITH STABILIZER AND IMPROVEMENT TO AWI AT AFS BIDAR
2025_MES_727940_2
CA NO. GE(AF)/BID/TOKEN/ 18 OF 2025-2026 8169
Open Tender
Civil Works
Item Rate
270 days
Bidar
As per NIT
8 documents required · 8 mandatory
₹500
GE(AF) BIDAR
₹86,000
Yes
29 Jan 2026
3 Nov 2025
24 Nov 2025
3 Nov 2025
17 Nov 2025
10 Nov 2025
3 Nov 2025 - 6 Nov 2025
Schedules of Works
Material and Labour for light shade Vitrified Ceramic tiles 9 to 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sq.m, in floors etc., set with spacer, joints of more than 3mm are grouted with epoxy grout in any colour to match the tiles including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. Note : The quoted rate shall deemed to include for providing screed bed laid under tiles.
e channel at 457mm c/c. Single layer of 12.5mm tapered edge Gypboard® Plain (conforming to IS 2095 (Part 1):2011,Certified board) is then screw fixed to ceiling section with 25mm Drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Gyproc® Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape. Serrated section has effective thickness of 2T (2xdepth), better load carrying capacity, enhanced screw retention, Improved acoustic performance & fire resistance as compared to plain n steel section. etc, complete all as specified and as directed.
S&F of UPVC (Unplasticized Poly-Vinyl Chloride ) Double panel openable multichambered and stiffened / reinforced framed Doors using 62 mm x 70 mm x 2.3mm (±0.2mm) size sections around as main frames with necessary Mullion sections of sizes 76 mm x 62 mm as sash bars and shutters made with the profile sections of size 102 mm x 62 mm, including the cost and fixing of Half 5mm thick clear Toughened glass / Half 5mm PVC Panel in shutters with necessary beadings, the corners of all the profiles of frames and shutters shall be homogeneously fusion heat welded without any gaps. The shutters shall have cylindrical lock and handle with key and other associated fittings, to facilitate smooth operation. Both the Frame and the Shutters shall be Reinforced with GI Profiles of thickness 1.25mm. Fixing the door unit to the existing masonry with anchor fastener as required. The gaps between the Door frames and masonry walls shall be filled with silicon(Dowsil) or with any other suitable filler materials by the installation at site.
Demolition of stone slabs and tiles of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc.
Dismantling floor, hearth or wall tiling including cement mortar bedding and removal of debris out of premises complete all as specified and directed.
M&L for sub main wiring with 2 runs of 6 sq mm, single core, PVC insulated, unsheathed FRLS, 1100 volts grade, multi stranded with copper conductor drawn through and including suitable size of ERW steel conduit pipe and accessories and one run of 6 sq mm, single core, PVC insulated, unsheathed FRLS, 1100 volts grade, multi stranded with copper conductor for earth continuity complete all as specified and as directed. Note :- 2 run of 6 sum single core copper conductor, 1 run of 6 sqmm copper conductor earth wire, PVC conduit and its accessories will be measured as one unit
Material & Labour 25 mm thick plain cement concrete Type B-0, 1:2:4 (12.5 mm graded aggregate) as in sub base for floor tiles
M&L Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surfaces finished even and smooth without using extra cement complete all as specified.
Material & Labour for Vitrified Ceramic Light Shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in vertical surfaces such as skirting, dado etc. set with spacer, joints of more than 3mm are grouted with epoxy grout in any colour to match on including 10 mm thick rendering in CM 1:4, complete all as specified and as directed. Note : The quoted rate shall deemed to include for providing rendering / backing coat under tiles.
Material and Labour for 18/19mm thick Plywood, grade BWP type BB fixed with screws to timber frame complete all as specified and as directed.
Supply, install, connect, test and commissioning of flame proof voltage stabilizer of 4.0 KVA capacity for automatic operation, single phase naturally air cooled, indoor type & designed for input variation between 170V to 260V with output voltage stabilized at 230V with accuracy of ± 2.5% with high & low voltage cut out & time delay including electric connection complete all as specified and as directed.
Material and Labour in repairs for 1mm thick acrylic laminated mica in any colour finishes fixed with adhesive material for shutters of ward robes, cabinets etc all as specified and as directed.
Supply and fixing Suspended 12.5mm thick Plain board Ceiling includes GypSerra™ Perimeter Channel {Material-GI(IS513),YS260Mpa,Finish-Galvanised 150GSM(IS277)} is fixed along the Perimeter of existing wall/ partition with the help of PVC Anchor (6x40) at 600mm c/c for brick wall. GypSerra™ Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 120GSM(IS277)}. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR1 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. GypSerra™ Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is fixed to the GypSerra™ Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2 x13 Gyproc® Metal to Metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} The GypSerra™ Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the GypSerra™ Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish-Zinc plating 4-6 micron} and in direction perpendicular to the Intermediat
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
Tender8169_2.pdf
Tender Documents • 0.95 MB
BOQ_826670.xls
BOQ • 11.62 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .